How to make a spoon spoon for a pike with your own hands, necessary materials (video)

How to make a spoon from a spoon handle

Knowledgeable fishermen make homemade baits from the cuttings, arguing that they play in the water interesting for the fish and have a symmetrical shape.
After all, with careful decoration, the appearance will imitate a small fish. But from the handle of an aluminum device they create an analogue of an expensive one.

It is recommended to use a steel spoon as the basis for such vibrators. They will not require additional shipping and will perform well in bodies of water with strong currents.

In addition, you can experiment with the body of the spinner and make it straight or wavy. If in the first case, a lot of skills will be required from the spinning angler so that the bait actively plays in the water. In the second, by bending the workpiece to the required radius, you won’t have to make any special efforts to get a bright game in the water.

Let's look at how to make a vibrator from a stem with a straight body by hand. To do this you need:

Cut 15–20 mm from the thin part of the handle. So the bait will look like bleak.
Drill holes in the workpiece for the winding rings. Remove burrs with a file. Paste them.
You need to put on a tee on the wide side of the handle, and fix the fishing line on the narrow side. In the version with an aluminum blank, the fasteners are performed in reverse.

The resulting spoon can be used for reservoirs with different current strengths. The type of wiring is selected individually.

How to make your own spinner

Selecting a base

How to make a spoon from a spoon?
Before moving on to specific actions, you need to select a suitable item that will serve as the basis of the gear. The best option is to use a small dessert spoon. The table may be too heavy and large, so it will be good for hunting exclusively large predatory fish. Choosing a teaspoon will allow you to use the tackle on the least powerful spinning rods. Its small size will allow you to catch relatively small fish: perch, chub, asp.

As for the nature of the metal from which the spoon is made, you can give preference to any alloy, from stainless steel to silver. To process the material, you may need a file, a hacksaw, pliers, or a hand or electric drill.

How to make a spoon from a spoon

After selecting the cutlery for making bait, we divide it into two separate parts - the handle and the spoon itself. We will prepare bait from both parts of the object. Initially, we will consider the option of a spinner made from the so-called scoop. After separating from the jumper, we process the surface with a file, grinding off the notches and bringing the plane of the edge to resemble the main line of the object being processed. The result is an oval with a plane concave in the middle. Next, at the vertices of the oval, on the line of the central axis, we drill symmetrical holes opposite each other.

The drilled holes are also processed with a file, cutting off the burrs and comparing the irregularities to the level of the base metal. At this stage, the weight of the workpiece is determined and, if it is insufficient for the conditions of the intended fishing, additional shipping elements are soldered or riveted. If soldering is done, lead is used. If you make shipment by riveting, the best option would be copper or brass. An additional weight is mounted in the recess of the scoop, subsequently processing the joints by grinding until the edge of the additional metal is smoothed with the border of the base of the workpiece. Upon completion of this operation, the base of the spoon can be considered completely ready for additional equipment.

Then the rings are inserted into the hole. A swivel or fastener is placed in the wider part of the product. A tee is mounted in a ring at the narrow end. After these manipulations, it is recommended to adjust the vibrating system. This can be done both in a pond and in a bath of water. The game of the spinner is adjusted by making uniform hems of the edges of the product both from the sides and from the poles of the oval. After adjusting the necessary parameters, the spoon is painted in promising colors and equipped with silicone or beads. After retrofitting and adjusting the playing characteristics, a do-it-yourself spoon spoon for pike is considered complete and is an equivalent version of a purchased product and a formidable weapon in the hunt for catfish.

Having finished with the scoop, we begin processing the spoons. This blank makes an excellent narrow spoon with oscillating effects when fishing for pike perch, perch and asp. We separate the narrow part or neck of the device from the workpiece. We get an even strip of metal with different widths at the base. As in the version with a scoop, using exactly the same algorithm of actions, we drill and process holes.

The next step is to determine what type of spinner we will produce: a straight spinner or one with a wave structure. The direct version only requires the operation of equipping with additional accessories and, in principle, is already ready for fishing. The option with a wave requires modification in the form of a smooth bend with a wave to certain radii and subsequent adjustment of the game by leveling or more critically bending the planes of the workpiece.

The straight version of the spinner does not have the capabilities of its own game during retrieves and requires mandatory animation on the part of the fisherman. The wave version plays well with monotonous and uniform wiring, making sweeping and leisurely movements. One of the advantages of the direct version of the bait is the possibility of ice fishing using the lure method. The finished structure can also be painted in working colors, depending on the angler’s considerations, using silicone or bead additives. Such simple transformations make the cutlery a promising bait for catching predatory fish using spinning rods.

DIY spinner for pike and perch

You can make the highest quality and catchiest baits yourself. To do this, you only need a small amount of materials and tools. Available tools and skillful hands will help you make a real assistant for catching a predator.

Spoon spoon

Such a vibrator can be quickly and easily made from an aluminum teaspoon by breaking off the handle. After this, the surface of the workpiece is polished using a file.

To attach the equipment, small holes are punched along the edges of the spoon. The tee is attached to a homemade spoon using a ring, which should be twice the size of its hook counterpart.

You can also make an oscillator from the remaining handle:

Reduce the workpiece by two centimeters and file the edges.
Punch two holes and attach the equipment. The tee should be placed on the wide side of the handle.
The spoon will be more catchy if you attach multi-colored strips of polyethylene to the tip of the tee.

Oscillator on a template

To make the lure look like a factory one, you will need more time and tools. You need to prepare:

templates;
gypsum;
plastic container with water;
metal plate;
manicure file;
file;
scissors;
candle.

Manufacturing stages:

Two holes are punched or drilled in the metal plate.
Paraffin is buried in the template.
After pouring, the shape of the workpiece is modeled using a nail file.
Gypsum is diluted in water to the consistency of thick sour cream.
The paraffin model is placed in plaster. After it hardens, a hole will appear in the gypsum mixture.
A metal plate is placed at the bottom of the mold using a soldering iron.
The tin is melted and placed into a mold.
The frozen bait is polished with a file, after which the holes necessary for attaching the equipment are made in it.
The spoon is polished again with a file and painted in the desired color.

Homemade spinner from a coin

A five-kopeck coin is best suited for its manufacture. You will also need:

round nose pliers;
pliers;
metal scissors;
drill with a diameter of 1 mm;
screwdriver;
flat file;
leash;
winding ring;
tee hook from the store.

Preparation method:

The edges of a clean, shiny coin are trimmed with scissors to create a diamond shape.
The vibrator needs to be given rounded shapes, for which the edges of the workpiece are processed with a needle file.
At sharp corners, holes are drilled using a screwdriver and a drill. For convenience, the procedure is carried out on a wooden board, and the coin is held by the edges with round nose pliers or pliers.
The holes are processed with a needle file.
The sharp edges of the workpiece are retracted from the center to different edges. You will get a curved spoon.
A leash is attached to one side of the vibrator, and a ring and tee are attached to the other.

The large summer spoon spoon is ready.

Tubular oscillating lures for pike

To make the model you will need a metal pipe of small diameter. The workpiece should be cut to the required length so that the edges are at a slight angle. However, their angles should be different.

Using sandpaper or a file, the edges should be well processed. After this, one hole is made on each of them.

Now you can attach equipment to the spoon. So that during the wiring process it scours the pond, a monofilament thread is attached to the end with an acute angle. A more advanced design would be a tubular vibrator consisting of three parts that are movably connected to each other. In the reservoir it will scour even stronger and more actively. And the model’s bends in the water make it very similar to the movements of a fish.

Oscillating baits made from corrugated tubes are very catchy. Holes are drilled in the cut blanks of the desired shape, which are used to attach the tee and fishing line.

Making spinners with your own hands

Making spinners

The easiest option to make with your own hands is a spinner spoon, detailed instructions are given below:

The contours of the bait are applied to the selected material; in appearance it will resemble a rhombus with predetermined parameters.
Using metal scissors, you need to cut out the layout.
The minor axis is calculated, which will be the bending boundary.
Having given the workpiece a horizontal position, you will need to solder a small triangular copper plate to it.
A hook is soldered to the copper plate.
A winding ring is attached to the top of the workpiece; to do this, you will need to drill a hole in the plate.
The finished vibrator is processed using sandpaper, after which it is completely suitable for use.

Making a spinner

The process of making a rotating spoon will look like this:

At the initial stage, a suitable stainless steel base is selected: it should have a cylindrical shape and be immersed in water when casting. The selected material is tested for compliance with these requirements in a basin of water.
Holes are drilled in the workpiece, the diameter of which should be sufficient for the passage of thick fishing line.
A hook is soldered on the opposite end of the part, its tip should be directed towards the sinker.
Additionally, the bait can be tied with bright colored threads or equipped with beads using waterproof glue. Such measures will make the spinner more noticeable and increase its catchability.
At the final stage, the spinner is treated with a special GOI polishing paste.

Homemade spinner-balancer

Balancers can be made in different ways depending on the requirements placed on them and fishing conditions.

One option is described below:

Using a file and a needle file, a stamp is made from a metal base; the most suitable material is a copper sheet 0.3 mm thick.
You can use a birch log as a base for stamping. Using a heavy hammer, a workpiece is formed: with metal scissors you can cut off all its excess parts, and with a file and needle file you can correct the shape.
A pendant will be installed in the upper part of the workpiece; in this place it is necessary to make a notch 0.3 cm long.
A hanging loop is soldered into the workpiece, and then single hooks located on different sides.
The cavity inside the workpiece is filled with tin until the balancer begins to take a horizontal position when it is hung.
It is necessary to ensure that the inner surface maintains a concave shape: this feature is adjusted by changing the amount of tin during the soldering process; its excess can be removed using a grinder.
Now you can move on to setting up the spinner. To do this, it is hung on a fishing rod, testing is carried out in the bathroom: the tail part can be bent and unbent until the desired game is obtained.
All that remains is to provide the balancers with an appropriate design: it can be covered with automotive enamel and three-dimensional eyes removed from the wobblers can be attached. At the last stage, a layer of yacht varnish is applied, after drying the lure is ready for use for fishing.

Read Fishing lures and making them yourself

Spinner for fishing in muddy water

In reservoirs with muddy water, fish bite worse due to poor visibility; they are unable to notice their potential prey at a great distance, so it is important to make a catchy and noticeable spoon with high-quality visualization. This process is detailed below:. This process is detailed below:

This process is detailed below:

As a base, you can use a small metal pipe cut in half. It will need to be given the required shape by bending, unbending and cutting in accordance with the existing layout.
It is recommended to grind the workpiece in such a way that it bears at least a vague resemblance to a real fish.
The hook is soldered to the wide side of the bait.
A winding ring is attached to the opposite part.
The spoon is subjected to grinding. The condition of the bait for fishing in muddy water must be monitored especially carefully, not allowing it to oxidize, fade or change color. To do this, it is periodically treated with sandpaper as changes occur.

From spoon cuttings

Tools:

hacksaw for metal;
file;
screwdriver;
metal drills 2-4 mm;
soldering iron 60-100 W;
round nose pliers;
file;
fine sandpaper.

Materials:

cupronickel or iron spoons;
battery lead;
solder;
flux.

A catchable spinner for pike perch is selected according to its length 5-12 cm and weight 12-24 grams. The spoon should be narrow and shiny.

You can rub tarnished metal with GOI paste.

The cuttings of spoons make good catchable lures for horizontal casting and vertical lures.

A hook or tee can be hung:

In the wide part of the spoon. It turns out to be an interesting planning game when falling.
In the narrow part of the spoon. As it rises and falls, the tail of the spinner with the edge creates attractive small low-frequency vibrations.

From a cupronickel spoon

A cupronickel spoon is best. It is heavier and brighter than iron.

There are tablespoons and teaspoons with a curved handle. Spoons made from such cuttings have an interesting, unique, attractive game. There are nickel silver table spoons with a weighted handle, in which case they do not even need to be shipped additionally.

A stalk is cut from a tablespoon or teaspoon.
The cut end of the cutting is rounded off with a file.
Holes for the winding rings are drilled from different sides.
Clockwork rings are hung.
A hook or tee is put on the corresponding ring.
The hook or tee is decorated with cambrics.
A single hook can also be “decorated” with a micro jig or a dead fish tail.

With soldered single hook

A hole is not drilled into the cut handle of the spoon at the point where the single hook is attached. The part of the spoon where the hook is attached is cleaned with fine sandpaper.
Processed with flux.
Tinned.
The shank of the hook is cleaned with fine sandpaper.
Processed with flux.
Tinned.
The hook is soldered to the body of the spoon. The joint is cleaned with sandpaper.
A hole is drilled on the other side for a winding ring to attach the spinner to the fishing line.

You can put on the hook:

the tail part of a dead fish (sprat, bleak, gudgeon, goby, topfin, sprat) is put on along the entire length of the hook without removing the hook from the nozzle (the tail of the fish is put on the hook at an angle);
jig;
colored cambrics;
edge of red woolen threads.

Shipment

If necessary, the cutting can be loaded with solder or battery lead. Shipped spoons are most often used in winter fishing.

The place of shipment is protected, treated with flux, and tinned.
Melt of solder or battery lead is applied for shipment.
The shipment is processed with a file to give it an ideal shape and cleaned with fine sandpaper.

With propeller

A spoon spoon that is too long is not suitable for use with a propeller. A short handle of a teaspoon 4-7 cm long is quite suitable for this option.

A ring is wound on a ferrous wire of the required length through a nail or using pliers to attach the hook.
Clamping the ring with pliers, the wire is bent so that the axis of the wire passes visually through the center of the ring.
They put on a bead, a homemade propeller, and another bead.
Part of the ferrous wire at the place where it is soldered to the body and the body at the place where the wire is soldered are cleaned, treated with flux, and tinned.
A wire with a ring, beads and a propeller is soldered to the body of the spoon.
A hole is drilled on the other side of the spoon and a winding ring is inserted to connect it to the fishing line.

DIY spinner spinner

Loading …

Let's imagine design options that will be easy to make even for an inexperienced fisherman. The procedure includes the following steps:

A petal-shaped blank is cut out of sheet metal. A hole is drilled in it for the location of the clamp.

Using a bearing ball, the workpiece is given a curved shape. Now the metal surface is polished using a special attachment for a drill or screwdriver. The diamond edge version is manufactured using the same bearing ball. The workpiece is placed on top and struck with a hammer. Each hit creates one edge.

Pre-purchased clamps and beads are placed on the wire.

A pinwheel can be made using copper wire, which is tightly wound onto a thicker rod. One end of the pinwheel is sharpened on an emery wheel until it is shaped into a cone.

As a result, a wire is hooked onto the hook, onto which a pinwheel, multi-colored beads, and a petal blank are sequentially put on.

How to make a lure for pike

To make spinners, it is best to have a clear example in the form of an original product or a sketch, on the basis of which it is much easier to carry out production. Having determined the subject of the final work, the fisherman needs to purchase the material required for processing, which often includes steel, copper and aluminum sheets up to 3 mm thick, tubes made of steel, copper, brass and duralumin not exceeding a diameter of 15 mm, steel wire up to 3 mm thick mm, lead and tin. In addition to the material for the blanks, standard fishing accessories are purchased: single and double hooks, tees, winding rings and swivels.

To process materials and connect together the elements of a future product, you will need a metalworking tool: a hacksaw, a hammer, a file, pliers, a drill with a set of drills, a vice, a scriber and a tape measure for marking and controlling the dimensions of the workpiece. An electric tool, such as a screwdriver and a small cutting machine, otherwise known as an angle grinder, will help speed up the process of producing catchy lures for pike. Paints and metal markers, holographic stickers, beads, beads and hard synthetic threads in bright colors will help give the bait a fighting look and coloring.

Making pike jigs

A homemade pike spoon is most often made from the scoop of an ordinary tablespoon. This part of the tableware is ideal for bait after a couple of simple manipulations associated with preparing the holes for subsequent equipping the workpiece with a tee and a winding ring for the fastening element. Initially, the handle is cut off from the spoon using a cutting machine or a hacksaw, cleaning the cut area to lines that coincide with the smooth lines of the future spoon. Holes are drilled at the tops of the oval in such a way that the winding rings with the tee and swivel threaded through them rotate freely without being pinched.

A swivel is placed in the wide part of the workpiece. A tee is installed at the narrow end. Without any additional modification, even this type of spinner will have certain qualities of play when retrieved, but for greater attractiveness, the body of the homemade product can be painted in colors that are promising, in the opinion of the fisherman. The part of the spoon that remains in the form of a handle can be processed into an analogue of a sheer Devon-type spoon.

In addition to using a spoon, the vibrator can be made from a piece of flat metal, steel sheet, copper or aluminum sheet by extruding or hammering the shape and then finishing the edges. To load this type of homemade product by soldering or peening, the concavity of the workpiece is filled with the required weights of tin and lead alloy, as well as a copper or brass plate. The stroke width of the finished fishing tool is adjusted by bending the edges. The deeper the concavity, the wider and wider the stroke of the oscillator.

Homemade turntables

Before you start making lures for pike in the form of a spinner, you need to carefully understand the principle of operation of the bait, the basis of which is the movement of the petal around a fixed axis through the influence of water pressure during wiring. The main working body of the bait is the petal, which is cut out of tin in the form of an oval. An oval can be of different sizes in width and length. A hole is drilled at one of the tops of the workpiece, through which the petal will be strung on a metal rod, which is a steel wire with a diameter of 1 to 3 mm. Loops are formed at the ends of the wire for subsequent installation of winding rings. The hinges are made by simply twisting the material using pliers. A swivel with a carabiner or a clasp is attached to one of the loops, and a tee is placed in the second.

To load the spinner around the rod, copper wire is wound in tight rings, gaining the required mass for the bait core, varying the number and diameters of the wire turn. The petal itself is painted in attractive colors or holographed. Some craftsmen, instead of a petal, equip the turntable with a turbine in the form of a miniature propeller with two or four blades. The turbine is cut out of a sheet of tin, bending the blades at different angles, which is how the individual performance characteristics of the homemade product are achieved. Assembling such a bait is similar to assembling a tool with a petal.

Advantages of handmade

This is an excellent material for creating spoons for pike, asp, perch and other predators.

It is also worth noting:

Availability of raw materials. There are spoons of various sizes in every home.
Saving money. To make a spinner yourself you need to buy just a few parts, which in total will cost no more than 50 rubles, or even less.
Unlimited service life. Spoons are made of stainless metal.
Possibility of implementing various ideas. To decorate the product, you can use paints, varnish, and colored threads.

But the main thing is the catchability of the spoon. After all, you can get a set of working predator baits practically for free.

Selection of material for the production of spinners

Any spoon is suitable for creating bait, be it a table spoon, a tea spoon or its dessert version. The size only gives additional opportunities in creating products for catching different types of fish. For example, a tablespoon will make an ideal size spoon for pike and catfish, and a dessert spoon will be perfect for catching perch and pike perch.

There are no special requirements for the workpiece material. Items made of stainless steel, aluminum alloys and pure steel options with various coatings of their base are quite suitable for work. The only difference may be the need for additional shipment of light alloy products. This problem can easily be solved by soldering the recess of the cutlery with a small mass of lead or by riveting additional material.

Read How to choose the length of a leash for a feeder based on fishing conditions

DIY spinner for pike and perch

Spoon spoon

Such a vibrator can be quickly and easily made from an aluminum teaspoon by breaking off the handle. After this, the surface of the workpiece is polished using a file.

To attach the equipment, small holes are punched along the edges of the spoon. The tee is attached to a homemade spoon using a ring, which should be twice the size of its hook counterpart.

You can also make an oscillator from the remaining handle:

Reduce the workpiece by two centimeters and file the edges.
Punch two holes and attach the equipment. The tee should be placed on the wide side of the handle.
The spoon will be more catchy if you attach multi-colored strips of polyethylene to the tip of the tee.

Oscillator on a template

To make the lure look like a factory one, you will need more time and tools. You need to prepare:

templates;
gypsum;
plastic container with water;
metal plate;
manicure file;
file;
scissors;
candle.

Manufacturing stages:

Two holes are punched or drilled in the metal plate.
Paraffin is buried in the template.
After pouring, the shape of the workpiece is modeled using a nail file.
Gypsum is diluted in water to the consistency of thick sour cream.
The paraffin model is placed in plaster. After it hardens, a hole will appear in the gypsum mixture.
A metal plate is placed at the bottom of the mold using a soldering iron.
The tin is melted and placed into a mold.
The frozen bait is polished with a file, after which the holes necessary for attaching the equipment are made in it.
The spoon is polished again with a file and painted in the desired color.

Homemade spinner from a coin

A five-kopeck coin is best suited for its manufacture. You will also need:

round nose pliers;
pliers;
metal scissors;
drill with a diameter of 1 mm;
screwdriver;
flat file;
leash;
winding ring;
tee hook from the store.

Preparation method:

The edges of a clean, shiny coin are trimmed with scissors to create a diamond shape.
The vibrator needs to be given rounded shapes, for which the edges of the workpiece are processed with a needle file.
At sharp corners, holes are drilled using a screwdriver and a drill. For convenience, the procedure is carried out on a wooden board, and the coin is held by the edges with round nose pliers or pliers.
The holes are processed with a needle file.
The sharp edges of the workpiece are retracted from the center to different edges. You will get a curved spoon.
A leash is attached to one side of the vibrator, and a ring and tee are attached to the other.

The large summer spoon spoon is ready.

Tubular oscillating lures for pike

To make the model you will need a metal pipe of small diameter. The workpiece should be cut to the required length so that the edges are at a slight angle. However, their angles should be different.

Using sandpaper or a file, the edges should be well processed. After this, one hole is made on each of them.

Oscillating baits made from corrugated tubes are very catchy. Holes are drilled in the cut blanks of the desired shape, which are used to attach the tee and fishing line.

When choosing a spinner for catching pike or perch, you should remember that you also need to take into account the characteristics of the reservoirs. When choosing bait in a store, it is recommended to give preference to high-quality gear from well-known manufacturers. They will serve you for many years and will guarantee a successful hunt for predators. If desired, catchable spoons can be made with your own hands.

Metal tube spoon

Option #1. We cut the metal tube of the required diameter at different angles. We process and polish the future lure. Drill two holes from different ends. One for attaching a fishing line or leash, the second for attaching a tee.

Option #2. The same principle, but there are several tubes that are connected through winding rings. The result is a composite spinner, like a mandula. The bends of such a spoon make it almost indistinguishable from the movements of a live fish. We suggest you read: Mugs for pike - How to make fishing mugs with your own hands

Features and Benefits

The famous author of books on spinning fishing, Viktor Andreev, once described an interesting case. One day he and his friends came to the same lake to catch pike. Moreover, they came purposefully, since, according to the stories of other fishermen, these gray predators were visible and invisible in this reservoir. We settled down and took out branded spinners. They started throwing - nothing. Not a single loot. We were already getting ready to leave, and a guy came ashore with some kind of rusty homemade spoon, and let’s carry large pikes.

The fishermen couldn't believe their eyes. And the reason turned out to be simple. The fact is that in this lake pike are accustomed to hunting rotans. They are dark in color. And the city spinners arrived with branded shiny spoons, to which the pike did not react.

https://www.youtube.com/watch{q}v=EVlL9XUxxCE

They had to urgently smoke their imported gear over a fire. Since then, according to the author, he became interested in homemade fishing equipment and now considers them his most favorite equipment.

Indeed, the advantages of homemade spinners include the following factors:

you can make your own custom-made tackle, which will be catchy exactly in the body of water where you usually fish;
it is not difficult to make from almost any available materials;
financial costs are minimal;
the manufacture of such gear is considered simple;
the field for experimentation is simply huge;
the number of fishing lures depends on your desire;
such home production does not take much time;
Finally, the small cost will not make you particularly sorry if the bait breaks - you will make another one.

Spoons can have different shapes and colors, the choice of which depends on the characteristics of the reservoir, the season and the fish that are supposed to be caught. They are made of steel, lead, copper. Craftsmen even make spoons for pike with their own hands from spoons.

The advantages of oscillators include:

the ability to use different types of wiring;
penetration of oscillating baits into seaweed and other hard-to-reach areas;
Possibility of use for catching pike, perch and other types of predator;
Possibility of use on the surface and at depth of water;
good flight properties.

If we consider spinners as bait only for pike, then in this case they have the following advantages:

Easy to use.
There are many varieties of spoons from which you can choose bait for any body of water.
Spoons are catchy and work better than many baits.
You can easily make spinners for pike and perch with your own hands.

Stainless steel and steel are the optimal materials for spinners, since they will not darken from constant exposure to water and large predators, such as pike, will not be able to bite through them.

To make such a bait you will not have to spend a lot of money, since you will only need to purchase small components.

It will not work to use a spoon spoon as a noise lure. You can attach various metal parts to such homemade gear that rotate when moving, but the effect from them will not be very pronounced. Ideally, a noise spinner is made of a metal tube into which shot is added. When moving, such gear will emit characteristic sounds and vibration.

To make bait from a spoon, you will need the following:

a tablespoon or teaspoon (it is desirable that the main material be stainless steel);
strong thin wire;
rings for attaching hooks and braids;
double or tee;
swivels.

If you show your imagination, such spinners can be the most unusual. You can create not only standard baits, but also original products, decorating them in all sorts of ways.