Tackle for carp: equipment and installation, what is better to fish with

Who doesn’t dream of catching this freshwater inhabitant, the omnivorous “piglet,” as amateur fishermen call it. Fish are found where there is a lot of vegetation and where various aquatic life teems.

It is important to choose the right carp gear, and then even a novice fisherman is doomed to success. Its proper installation will undoubtedly affect the effectiveness of the hunt. They are selected depending on weather conditions, type of reservoir, and bottom topography. The options presented below are relevant from year to year and do their job perfectly.

How to catch: basic methods

It is a separate direction, characterized by its own traditions and rules. Anyone who wants to catch a large fish needs to think through a fishing strategy, equipment and installation of fishing gear. Even on bodies of water that are similar in appearance, different types of fishing rod equipment are used.

The behavior of carp fish species depends on the season. As a heat-loving creature, it is active in water heated to +12 degrees. When searching for a trophy, take into account the constancy of the habitat, where there is a division into resting and feeding areas. And schools of fish do not change their routes of movement.

Interesting! It becomes indifferent to food during the spawning period. It goes to depth when the water temperature drops sharply. Therefore, in winter it is almost impossible to catch a large “pig”.

Golden fish like to wander in shallow water. During floods of rivers and lakes, flocks can be seen floating in warm water among the grass. Cyprinids prefer silty and clayey bottoms of reservoirs. It takes refuge in anomalous zones, where there are depressions with islands of driftwood, snags, and islands of vegetation. In winter, aquatic inhabitants slide into holes, where they lie down and wait for the arrival of spring.

After the water warms up in spring, fishermen begin to collect:

float rods;
special fishing rods for freshwater inhabitants;
bottom fishing rods with conventional equipment and on a feeder.

Each type has its own installation features. Each will prove effective under certain fishing conditions.

Habits of carp

Carp is not a predatory fish. Therefore, catching it with spinners is a useless exercise. He likes to feed near the bottom, which means, first of all, bottom and float tackle are suitable for catching him. It is also necessary to take into account his seasonal habits. This fish begins to bite in the spring, when the water temperature rises to 10-15 degrees. At this time, the carp comes out to the shallows, where you can easily catch it with a float rod. When the water warms up even more, it goes back into the depths, where it feeds along the bottom, here you can already use bottom tackle.

The best spring bite is at the end of May before spawning. But it doesn’t last long, at the beginning of June, with the beginning of spawning the bite dies down completely, you can’t catch it with practically any tackle. But then, starting from mid-June, carp are actively caught until the end of October.

Float rod

All summer and early autumn, carp are caught using a float rod. The inhabitant of a reservoir with a silted bottom bites on a float, since it will be more difficult to catch it on a donk. This fascinating process is not at all as easy as many people think.

To catch an impressive specimen on a float rod, you should equip it with:

a match or plug rod 5 meters long, durable, with an elastic top and guide rings;
a small inertia-free reel equipped with a friction brake;
high-quality fishing line with a diameter of up to 0.35 millimeters;
leash made of fluorocarbon fishing line;
an ordinary float with a carrying capacity of 3-5 grams and a long antenna;
an inconspicuous sinker;
forged hooks No. 2 to 8 with a short shank and a wide hook width.

Installation is aimed at distributing the load over the entire tackle. The mass of the weights is such that the float is immersed in the water, protruding ¼ of the way. When carp hunting with a float rod, patience and perseverance are required. A fish can bite suddenly or unnoticed. Here it is important to hook in time, without giving the line slack. It is worth extinguishing the jerks of the trophy, not allowing it to leave, tiring it. Useful when fishing with landing nets.

Equipment depending on fishing conditions

The feeder is notable for the fact that it has many effective equipment that allows you to catch fish anywhere, regardless of its mood, unlike, for example, fishing with a float rod. If the carp behaves actively and reacts vividly to the proposed baits and attachments, then the following installations can be recommended:

paternoster;
rocker;
flat method;
pacifier;
spring charged with food.

If the fish behaves cautiously or passively, then the listed equipment is ineffective. In this case, it makes sense to reconfigure the gear for other specialized installations:

asymmetrical loop;
hair accessories;
inline.

Hair rigs are one of the most popular bait rigs.
Fasteners are used to quickly replace rigs. A swivel will help minimize twisting of the leash. To protect the knot from deformation, buffer beads are used. The length of the outlet, as mentioned above, is selected to suit the mood of the carp.

Once you’ve collected your gear, you shouldn’t forget about useful little things. These are various stands for rods in the form of “slingshots” and tripods. To ensure 100% detection of bites, electronic alarms are used. If they are not there, then they use bells or are guided by the bright tip of the feeder tip.

To the feeder

One of the mining methods is feeder. Carp anglers prefer fishing gear due to the simplicity of installing the gear, but the capture process will be interesting and spectacular. Feeder fishing is used in deep-sea reservoirs and shallow places. The rod is suitable for medium and long casting.

Feeder rods are inherently heavy. They use forms of 5.54 meters and dough of 90 grams and above. They use an inertia-free reel with high traction properties and parameters for storing bulk cords 150 meters long and 0.35 millimeters in diameter. An adjustable clutch and baitrunner are required.

Depending on the fishing distance, a monofilament line with the ability to stretch is selected. This will help prevent the cord from breaking when the fish jerks. Fishing for a large specimen will be successful with such a fishing line. To catch powerful fish, we recommend tying a fishing rod. This will protect it from being pulled into the pond.

Important! When fishing is carried out at close distances, a monofilament with a diameter of 0.3 millimeters is suitable. For long distances, a braided cord is required, the color of which is selected in accordance with the tone of the water and vegetation of the reservoir. Gray or dark green cords will be less noticeable.

The size of the hook depends on the size of the bait and the expected size of the fish. It is better to take numbers from 6 to 8. The fastening ring for tying the hook must be reliable. Feeders suitable for standing water are lightweight with a small mesh or in the form of a nipple. On the current - rectangular. Installation is suitable for both in-line, asymmetrical hinge, and paternoster, flat, rocker.

Casting will be convenient, and replacement of equipment will happen quickly if the feeder has swivels and fasteners. Buffer beads are placed in front of the knots to protect the knitting material from deformation. The diameter of the leashes is less than the main line, and the length is within 7-30 centimeters.

The length of the leader decreases when the fish is highly active. Up to 7 leashes can be knitted at the same time. The likelihood of catching a large carp increases if alarms are installed on the tackle and the rod is mounted on a stand.

Catching carp with boilies

Fishing experts prefer to use boilies as bait. The dough balls are flavored, giving them a certain taste of animal and plant foods. Many people love complementary foods, which is why they catch fish successfully with them.

The best option for fishing with boilies is a feeder rod. Assembly is carried out on a rod having a test value of 40-80 grams. The kit for carp fishing includes a powerful spinning reel and monofilament line.

Installation is carried out using feeder ties. The boilies are placed on a special hair rig, securing them right next to the hook. When trying to swallow a soft, fragrant bait, the fish bumps into the hook sideways. The hook is selected the same size as the boilie or slightly smaller. It is better to put the rod on a sound alarm so that there is a result from the bite.

Feeder

Feeder gear for carp fishing has become the most popular and acceptable due to the high sensitivity of the fishing rod and more accurate casting of bait over long distances. For the feeder, two or three-component spinning rods, different in length and sensitivity, are often used. You need a suitable reel. The simplest option is inertia-free and inexpensive. Instead of fishing line, it is more profitable to use a braided cord; the breaking force should be in the range of 8–10 kg.

Feeder equipment

It is better to watch the video examples for how to knit it. Classic methods of mounting equipment are called paternoster and asymmetrical loop. The carp bait used in feeder fishing is the same as on bottom gear. Catching capra on a feeder always involves experimenting with feeders.

Carp is an unpredictable fish, which makes fishing for it an exciting experience. When going fishing, it is better to have several types of gear for carp, in case of breakage or loss. The ability and understanding of how and where it is best to use this or that fishing rod is the key to successful fishing.

DIY carp tackle

On the donk

One of the old proven methods is donka fishing. It is especially often used in carp fishing. It is better to cast to the reeds, to places overgrown with grass, to the exits of pits. You can fish with donka in warm and cold seasons.

The fishing gear is equipped with:

a rod with a dough of at least 100 grams, 2.7-3.0 meters long;
a spinning reel with a spool of 3-4 thousand;
monofilament fishing line 0.3-0.35 millimeters;
braided cord with a diameter of 0.2-0.25 millimeters when fishing from a boat;
leashes up to 5 pieces;
hooks numbered 2-6, having a wide hook;
streamlined shape with a weight of 40 grams

The sinker is combined with a feeder, which can have different shapes and methods of feeding complementary foods.

Pacifier and its benefits

The main advantage of the feeder is that the carp itself is hooked when it gets onto the hooks. After all, they stick out from the feeder on leashes 5-7 centimeters long. Sucking the viscous mass from the feeder, the fish does not notice the danger - and soon finds itself hooked. The likelihood of ingestion increases as the weight of the sinker increases. The popularity of the pacifier is that you can make it yourself using available material.

Makushatnik and its installation

Carp fishermen value the method of fishing with the macaque because it allows them to catch a large trophy. The classic device is based on a flat load. Leashes with hooks extend from the plate, which lead behind the bait.

As a topping, take a piece of pressed cake. It is secured with an elastic band and a bolt. The turbidity rising from the appetizing top attracts the voracious freshwater “pig”. At the same time, he does not notice leashes with hooks, sucking them in along with nutrient particles floating in the water.

Typically, the installation of a machushka is carried out on a bottom fishing rod, observing a number of requirements:

The weight of the feeder should not be less than 30 grams. Sometimes the weight reaches 130 grams if caught in the current.
Hooks on leashes are numbered 8-10. The length of the leashes can be up to 20 centimeters, then self-hooking is guaranteed. But it is more humane to impose short leashes of 8 centimeters. The number of leashes varies from 2 short ones in current to 4 in still water.
The top of the head is attached to the main fishing line with a monofilament of 0.3-0.4 millimeters. The knitting method is either loop to loop, or through a swivel.
The test rod is selected depending on the weight of the load. A powerful carp feeder would be ideal.
You can’t do without a reel with a 3000-6000 class baitrunner.
The fishing line is suitable with a high breaking load and a diameter of 0.4-0.5 millimeters.
It is advisable to use a bite alarm.
Tackle with a macaque is useless where many fry are found. The bait will be eaten by small things.

Spring

The feeder, made in the shape of a spiral from rigid wire, is used by amateurs when fishing for carp. The fish pays attention to the spring filled with a viscous nutrient mass, trying to suck on large pieces of food. This is where hook swallowing occurs.

There are several options for spring feeders. They differ in shape, size, and method of attachment to the fishing line. A “donut” is a spring coiled into a ring with a diameter of 6 centimeters. Leashes with hooks are tied around the circumference. Use gear in reservoirs with muddy bottoms.

A cone-shaped spring is called a "harvester". Leashes are tied to the top of the feeder. Anyone can make such a feeder. Here you don’t have to bother with knitting leashes to the main line. They are connected to the spring.

Choosing a reservoir for carp fishing

Choosing the right place where there are carp is a very important task for the fisherman. In most cases, the presence of fish in a particular place in a body of water can be understood by visual, mechanical and acoustic signs. Just carefully examine the pond and listen to what is happening in it.

Such large fish as carp are easy to find in a pond due to their fast movements near the surface of the water and high jumps. The carp often jumps out of the reservoir, and at the same time makes a “candle” and splashes into the water noisily. This is how carp usually behave in the evening, but this is not always a sign of a good bite; rather, on the contrary, it frees the gills from silt and dirt after a heavy meal.

Sometimes you can see carp swimming all over the pond, and not in one place - this is most likely a sign that the carp will bite reluctantly.

On warm days, carp often swim to the surface and warm their backs in the sun. At such times they readily take bait.

You can also find carp in shallow areas of fast-flowing rivers. There, positioned against the flow of water, the fish cleanses the body of parasites. The fish does the same thing when it rubs against sandy areas of the bottom. At this time, he is not particularly voracious, but after finishing cleaning, he will definitely go to feed.

You can detect carp by splashes and movement in coastal vegetation, reeds or water lilies. Fish crawl through aquatic plants in search of food. At this time, the characteristic smacking sounds of carp can be heard. You can find carp by the bubbles they raise when digging through the mud.

When choosing a fishing spot, be sure to take into account all the factors that change the activity and normal behavior of the fish. Sometimes even an obvious belief in luck can be a mistake

For example, having noticed a good catch from nearby fishermen, you settle down in a place near them. Soon, you may notice that no matter what you use the same baits, lures and lures, the carp does not want to bite. The reason for this lack of catch is that you did not take into account the effect of fishing pressure on the fish. The carp is frightened by such an invasion of fishermen on the shore and goes into the depths.

Often, colorful clothes (red, white, yellow), noisy and active behavior of people on the shore, in the absence of natural shelters in the reservoir that could cover a person from the fish, can become a reason for the fish to go to depth.

Carp fishing is a fascinating and interesting activity. But you need to approach it wisely. This will provide you with a huge amount of positive emotions and a trophy specimen of this beautiful fish.

Make it a rule, on every fishing trip, the first thing you do is...

What gear to use

You should prepare skillfully, taking into account fishing conditions, type of reservoir, and weight of fish. Each part must meet certain carp fishing requirements. The installations themselves are selected depending on the time of year, the reservoir, its bottom and sometimes a number of other factors.

We advise beginners to start with something simple, this will give them the opportunity to get acquainted with this complex area, gain some insight and understand what is most convenient for you. Listed below are the most common approaches, with observations and very important tips.

Hooks and their forms

The hook is necessary for self-hooking fish. If it is chosen incorrectly, then you will not catch big fish. Hooks with a straight tip are more often used. It catches well with the sting looking inward. You need a barb on the hook, especially when fishing.

In reservoirs with dense vegetation, hooks with a long shank are used. In clear water it is better to fish with a short one. A wide bend is important so that the area of the fish's mouth to grip the hook is sufficient.

Sinker

The main factors in choosing cargo will be:

strong retention of equipment at the feeding point;
timely notification of a bite thanks to the tension of the fishing line;
ensuring the location of the bait at the required distance.

Round sinkers are a good option for medium-distance fishing on hard-bottomed waters. Pear-shaped ones are stable in silted areas, and in the shape of a flat arrow - in places where there is a lot of vegetation and reeds.

Leashes and their length

Tie leashes of different lengths:

For fishing on lakes with a hard bottom, an average of 20 to 30 centimeters is suitable.
On muddy bottoms, up to half a meter long are needed.
Short ones of 10-20 centimeters will be needed during the current.

With long leashes, the tackle cannot be cast far. It is believed that short leashes are more effective on carp, since the fish’s body is elongated.

Anti-twist: important points

In tandem with the safety clip is an anti-twist device. Part of the equipment is needed to avoid overlaps when landing fish. The anti-twist is made from silicone tubes. And here it is important to pay attention to the smell coming from the material. The pipes should not be repulsive due to their aroma and shiny surface.

What size swivels should I use?

A swivel is used at the point where the sinker connects. It prevents overlaps and twists. The question often arises regarding sizes. For carp, you need universal swivels number 10. For a large trophy, a tungsten model is desirable.

Tips and tricks

Elements of equipment should be minimized in terms of their strength. There is no point in fishing with gear designed for ten-kilogram carp in a reservoir where they do not grow more than one or two kilograms. But it makes no sense to use too weak gear in places where you can catch respectable specimens.
The color scheme of the fishing line, sinkers and other elements must match the environment in the pond. There are many shades of monofilament fishing line, which allows you to choose the right one. There is also a flucarbon line - it is almost invisible in the water.
Elements of equipment should not have any odor. Carp, like other fish, has an excellent sense of smell. Therefore, strong odors can scare away fish.
The equipment should lie tightly on the bottom. Otherwise, it will be carried away by the current, and the likelihood of noticing a bite and hooking the fish correctly is reduced.
Practice is the best teacher. Try different types and combinations of rigs. Customize the gear for yourself. Then achieve excellent results in this type of fishing, which some have come to call “carp fishing.” And don’t forget to take care of the fish you catch and the environment.

How to choose gear based on fishing conditions

It is not advisable to use the same equipment on all bodies of water. It is necessary to study the bottom of the lake, channels, fish sites and their features. Once you have collected enough data, you need to draw conclusions and choose the most suitable one.

The difference will be noticeable: in some reservoir there is a muddy bottom and the wrong approach will bring fewer bites, because the selected feeder will simply sink in the mud. There are quite a lot of such nuances, they all come with experience, but we tried to describe the general principles, knowing which you can go fishing tomorrow.

The bottom is flat, without relief

In clean areas of the reservoir, the flat method is often used, with minor modifications. Carp anglers and paternosters actively use them, content with different types of fish. Hair equipment is effective here. Below is a close-up of her in the photo.

The point is this: the carp, so to speak, senses the hook and tries to avoid it. In this case, they began to attach the bait to the “hair”. As a result, having lost caution, the fish sucks in the food, along with which the hook gets into the mouth.

Corroded areas

Finding carp in such places is difficult, almost impossible. But if the bites start, then the inline method is used. You should be careful here, because any vegetation or clutter at the bottom, in the form of branches, trees, bushes, will help your opponent.

As soon as he gets weak, he will immediately try to go into the snags. By wrapping the line around them you will get a break. Most often, beginners go to paid artificial reservoirs, where such places are not found.

Muddy bottom

In silted areas, we recommend choosing the flat rig installation method. Such a feeder will hold up perfectly due to its shape. A universal paternoster with a small weight of sinker will not bury itself in the silt. And light feeders will attract voracious fish with food.

The method came from England and enjoys great authority. Feeders of this type are open and have a load along the entire plane of the lower surface. Thanks to this, during a dive they always lie down with their stern facing up. The second advantage is that there are often more than 2 hooks in it.

Feeding technology

In places of one or more promising sites, it can create zones in which fish swim and feed with great activity.

Carp fishing methods

Using Rocket feeders. If you need to accurately and accurately feed a remote fishing area with boilies or pellets, the “rocket” feeder is ideal for you.
This feeder has an elongated narrow shape and allows you to throw bait over long distances. With good technique you can throw it 130-140 meters.

They are used both in still water and in currents. You just need to choose the right feeder. Rockets without a lid are only suitable for standing water. The moment the feeder hits the water, it turns over and all the food spills out. The feeder, designed for flow, has a lid. Having reached the bottom, the fisherman pulls the rod, the lid opens and the food is washed out.

Using a slingshot. Also a popular method, but applicable only in standing water. Feed with boilies or small balls. Slingshots are bought in specialized carp fishing stores (it’s also convenient to buy on the Internet).

Traditional feeder feeding

Feeder feeding is based on feeding a point with a large open-type feeder, which must be delivered from time to time to the same point.
The whole process looks like this:

We attach the open-type feeder to the equipment, but do not attach the leash with the hook yet.
We fill the feeder with food and press it down a little on the sides so that the food doesn’t spill out while swinging, but you don’t need to press it in too much.
By eye, we make a landmark on the opposite bank (tree, house, bushes, dam) and cast 80% of the entire force in that direction, as soon as the feeder touches the water, we close the line guide.
Immediately place the rod on a stand with an angle to the direction of the fishing line of 45-60 degrees. The line is stretched, wait until it sag - this will be a signal that the feeder is at the bottom.
If the feeder falls to the bottom, you need to clip the line on the spool using the triangular stopper. This will allow you to cast at the same distance from the shore every time.
Wait 10 seconds for the food to soften a little and make a sharp hook, the food should immediately wash out at the fishing point, and the feeder can be pulled out. Starting feeding is done with at least 10-15 casts, after which a leash with a hook is attached and active fishing begins.

Types of carp rigs with a feeder

Types are selected after studying the topography of the bottom of the reservoir. The chance of successfully hooking increases and depends on proper preparation of the tackle. All of them are not difficult to master; it is enough to implement them once and everything will become clear. Using our recommendations, choose any of them that best suits your conditions.

Paternoster and its installation

Performed using a popular method using:

braided fishing line 0.13 millimeters;
monofilament with a diameter of 0.2;
rectangular feeder with clasp;
hooks numbered 12-15 for small fish, 7-8 for large fish.

The fishing line is wound onto a reel, pulling it into the rings of the rod. Stepping back a meter from the end of the fishing rod, bend the fishing line in half, tying a knot. The resulting loop secures the load and the feeder. To tie the leash to the main fishing line, you need to leave a 20-centimeter segment.

Symmetrical loop: DIY knitting process

The peculiarity of the popular feeder equipment is that with it the fish is capable of self-hooking. The process of knitting a symmetrical loop consists of:

folding the fishing line in half and forming a loop with a figure eight knot at the bend;
twisting the ends around each other while squeezing the loop with your teeth;
limiting the required length by twisting a knot;
placing in front of the lower stopper assembly and threading the feeder into one end;
repeated folding and loop formation.

We wet all knots before tightening. Instead of a figure eight knot, a simple double or triple knot is used.

In-line method (Running feeder and running with tap)

Inline is popular among those who prefer to fish for carp on a small lake. There is no need to cast your fishing rod far here. The main thing in the method is that the anti-twist is passed through the center of the sinker. When the fish bites, it will be faced with the full weight of the pear-shaped sinker, and then it will be easy to hook it.

It goes like this:

The swivel is tied to the fishing line, and below there is a rubber stopper.
By stretching the fishing line through the feeder 35 centimeters, they make a loop.
Attach the hook to the hair rig.
Leashes are made within 10 centimeters from monofilament.

Flat

You can either make such feeders yourself or buy them already assembled. A curved stainless steel wire along with a metal pin is placed in a mold. Then pour molten lead. When the product has cooled, the pin is removed and a plastic tube is attached in its place.

The flat method allows you to make precise casts over long distances. They are also sold ready-made and are inexpensive. The advantage of this method is described above and is undoubtedly one of the favorites.

Blind equipment

It is distinguished by the use of a short leash, which brings success when fishing at shallow depths. The line is passed through a silicone tube and clip. The leader with the hook is connected to the swivel, just like the beginning of the fishing line. The end is also passed through a swivel to the main line. Thanks to the solid installation, the feeder does not slip.

With anti-twist

To catch carp in strong currents, we advise you to adhere to the following recommendations:

the monofilament was inserted into the anti-twist with stoppers;
fix the swivel by placing a leash with hooks below;
mount the feeder on a carabiner
Assembling the tackle increases its sensitivity to bites. A powerful reel allows you to cope with strong fish.

Catching a large specimen represents great success for every angler. But behind a successful fishing result is the preparation of everything necessary, competent installation, incorporating the knowledge and experience of a carp fisherman.

Part XIII. Carp fishing rigs – Carptoday School

If you look at the structure of carp gear (we take the entire system from reel to hook), it has distinctive features from other methods of fishing, be it float or feeder fishing. The fact is that the carp rig (the section that is located between the leash and the shock leader) is knitted entirely on the leadcore. A special material, which is a lead core in a fabric braid.

You attach various accessories to the leadcore (clips, silicone cones, beads, bumpers and other small parts) that will allow you to attach sinkers and leads. In total, four classic rigs are used in carp fishing: “Safe clip”, “Sliding rig”, “Inline” and “Helicopter”.

Each installation has its own pros and cons. There is no ideal solution for all conditions. The closest thing to universality is the “Safe Clip”, since it has practically no disadvantages, but at the same time there are no pronounced advantages, like the flight qualities of the “Helicopter”, the sensitivity of the “Sliding Montage” or the notch of the “Inline”.

Selection of installation and instructions for knitting it

How to choose the most suitable installation? Let's go from general to specific. First, let's highlight the strongest and weakest aspects of each installation.

Installation	pros	Minuses
Safety clip	Versatility of installation	Overlaps when casting
Sliding installation	Excellent indication	Not the best serif
Inline	Excellent serif	Only for hard bottom
Helicopter	Long cast	Not the best serif

Now let's look at each installation separately.

A) Safety clip. In the late 1980s there were huge changes in the rigs used to catch carp in England. Previously, when the sinker was tightly fastened, the fish was doomed to death if the tackle broke. The sinker, dangling on the fishing line, became entangled in the seaweed, clung to snags, and the poor carp, doomed to remain “tethered” for the rest of its days due to the fisherman’s mistake, could not escape.

This is the most important advantage of a safe clip - if the tackle breaks and the sinker subsequently gets caught on the seaweed, at the first jerk of the fish, the sinker will fly out of the clip. And the carp will quickly get rid of the hook and leash.

The safety clip is the most popular installation among anglers around the world. It is incredibly easy to install and the knitting process takes about two minutes. And if you get used to it, even less. You can fish on almost any bottom, at any distance (with the correct throwing technique and constant training, you can send a safe clip at 150-160 meters), and the only problem - overlaps - can be solved very simply. For this we use PVA sticks. But we will talk about PVA in the following chapters.

Most anglers have encountered the problem of a sinker flying off during a powerful power cast. It should be noted that initially all carp gear was invented for English conditions, where fishing is most often carried out at a short distance from the shore. That is why the clips were not designed for increased loads when casting. Now, especially for such cases, companies have begun to produce reinforced sets of safe clips, and even clips with a metal shackle.

Disadvantages and how to mitigate them

Overlaps. Occurs, as a rule, when using soft leader materials. To fish with a safe clip, it is better to use braided materials and hang a stick.
Bad serif. There is no need to worry too much here, because a bad serif can only be called in relation to the inline serif. And he has the best. So don't worry, people all over the world are successfully hooking fish and with a safety clip, you don't have to do anything. Just keep in mind that if drifts start, one solution may be to replace the rig with an inline one (only if the fishing point has a clean, hard bottom)
Shooting the sinker. When casting, we install sets with a reinforced clip. Shooting can also occur in the first moments after immersion in water when you use a large PVA stick. It will resist the landing of the equipment and the sinker will sometimes fly off. Either you will need to additionally tie the clip with PVA thread, or make the stick size smaller.

B) Sliding installation. This came from feeder fishing. The meaning is the same - when biting, the line calmly runs through the rings, providing you with maximum sensitivity of the gear to bites. When fishing with a sliding rig, you must always be close to the rods so as not to miss the moment of hooking. Remember that the angler is responsible for hooking in this case! Also, a sliding rig is very suitable for fishing near snags, reeds or other shelters where the fish can rush after biting. Due to the high information content of the sliding installation, you can have time to react and take it towards open water. There is an opinion that a sliding rig is not suitable for long casts, and that it is better to fish at a distance of 30-50 meters. In fact, the point here is not that it cannot be thrown far. Simply, due to the tension of the fishing line, additional resistance will be created, and the whole idea of \u200b\u200ba sliding installation comes to naught.

And yet, the sliding rig is the most sensitive to the bite and is currently growing in popularity. Many fishermen, finding themselves on a new body of water, prefer this particular installation in order to quickly get an idea of the preferences of the local fish.

Disadvantages and how to mitigate them

In fact, it would be correct to say that the slip mount is simply a variation of the safety clip. The sinker is positioned on the side in exactly the same way, it’s just that the adapter (clip) is secured so that the fluid passes through it smoothly. Therefore, all the disadvantages of running mounting are exactly the same as those of a safe clip and they need to be solved in exactly the same way. The only thing is that the sinker is unlikely to shoot off, especially if you knit according to our video below.

B) Inline. The most aggressive installation for carp, which allows you to achieve maximum hooking. This happens due to the fact that the leash is attached directly to the sinker and when the fish tightens the bait, there will be an abrupt stop followed by a rapid reversal of the hook tip into the fish’s lip. As a rule, with all sinkers for inline fishing, the center of gravity is shifted just to the place where the leash is attached, which adds even more load to the hook when biting. This also serves as a disadvantage, because you should only fish with an inline on a hard bottom, otherwise the sinker will very quickly drag the entire leash into the silt. Another unconditional advantage of inline is that it is ideal for using PVA bags. Thanks to its compactness, it fits perfectly inside and allows the leash to calmly take a better position after the PVA shell of the bag dissolves.

Disadvantages and how to mitigate them

The main drawback is the muddy ponds. You can lengthen the leash and carry out a bunch of manipulations, but the best option is to simply change the installation. Inline is only suitable for hard bottom areas! Do not use this wonderful installation in inappropriate conditions and there will be no problems.

D) Helicopter. This rig is designed for long and very long casts. It flies like a cannon. The only negative is that it is not the best indication. Probably, of all four montages, this one is the least informative regarding fish bites. But when you need to cast at 160-170 or even 180 meters, none of the four rigs can do a better job than the Helicopter. It's worth noting that it's also ideal for mud fishing! Since you can constantly adjust the height of the leash on the leadcore by moving the stop beads, you can experimentally determine how much the sinker sinks into the silt and level out this process. So when fishing with a “helicopter” you can fish even in the most difficult conditions.

It should be added that one of the most popular rigs today is the Chod-rig and is used only on helicopter rigs. Their rigid section compensates for the low sensitivity of the gear. Therefore, we would recommend making the leash when fishing with a “Helicopter” as short as possible, and also as rigid as possible.

Disadvantages and how to mitigate them

The disadvantages relate mainly to fishing with ordinary leader materials, and not with rigid sections, such as a chod-rig. If you decide to put a classic carp leash on a helicopter, then be prepared that at great depths at the fishing point, when immersed in water, the leash may begin to twist around the leadcore. This is unlikely to happen at a depth of about two meters, but if deeper, it is better to use hard mono material.
Also, when fishing with a classic leash, you should be prepared for the fact that delicate casting also leads to tangling of the equipment. It will not spin around the leadcore like a power cast, especially if it is made of soft material.
Weak hook. Again we are talking about classic leashes. In general, if you sum up all the disadvantages of a helicopter, then there are practically none if you use a rigid mono leash!

And yet, which installation is better to start with?

We would recommend linking all four montages in advance. Firstly, just in case, the conditions are different, and secondly, just to be able to knit and understand how the basic rigs work in carp fishing. You can purchase a pack of ready-made montages of each type so that they serve as a guideline for you as to what you should strive for. Believe me, in the long run, creating your own montages will cost much less than buying ready-made kits. Moreover, there is nothing complicated in any of the four options.

How many installations will I need?

It is better to knit 4 sets of each installation and 4 spare pieces. This is necessary so that if the fishing line breaks, you can immediately replace it with a spare one, and then start repairing it.

I connected everything, arrived at the reservoir, what installation should I install?

If you find a fishing spot and can’t get there with either a clip or an inline, then use a helicopter
If you find a fishing point near snags, reeds, sunken trees, thickets of grass - sliding installation
Clean hard bottom – inline
There is mud everywhere - a helicopter
In all other cases, use a safe clip.

Also, for all beginners, we would recommend varying the equipment in order to find the option that seems most suitable, interesting and in which you believe more. If the bite is good, try setting up each of the rigs and fishing on it for a while. And compare with the performance of other installations! Don't be afraid to try, especially on your first fishing trips!

Where to store finished montages?

Special boxes for accessories contain reels prepared specifically for leadcores. They don’t get confused and fit easily there along with all the elements! You can, of course, store it in boxes or plastic bags made by yourself, but there have already been so many cases of snags, and the leadcore got confused... It’s time to throw the gear, and we are trying to separate the leadcore from each other...

What to do with editing after fishing? Its service life?

The leadcore serves until it breaks or a rod begins to stick out of it. If in the second or third season the leadcore has retained its appearance, does not fray or crack anywhere, feel free to use it on further fishing trips.

Is there a difference between clips and accessories from different companies?

There are no differences in mechanics. All the same. There is also no particular difference in materials; the main thing is to adhere to the rule of buying products from companies that have proven themselves over the years to be the best.

What does carp-safe installation mean?

This means that if the tackle breaks, and this happens periodically, the fish will be able to free itself first from the sinker, and then from the leash. As a rule, the sinker will get caught on some obstacle as the fish swims and fly off. If you look closely at each of the montages, this will immediately become noticeable. With a secure clip, the sinker generally flies off the fastest; with a helicopter, the fish pulls on the leader, tearing off the stop bead and the leader slides off the leadcore.

The same thing happens with a sliding rig - the sinker remains on the ground. The apparent difficulties with inline are actually made up. The silicone insert will fly off under the force of the fish and free up the movement of the leash through the sinker. And sooner or later the fish will free itself from the hook itself. Thus, each of the four installations is absolutely safe for fish!

Full or partial copying without the consent of the portal editors is prohibited