Content
- Fishing for bream on a feeder in spring and summer
- Where to catch bream
- Feeder equipment for bream
- Bait for catching bream on a feeder
- Bait for bream
- Features of feeder fishing in spring and summer
- Video: Catching bream on a feeder video
- Expert commentary
Having chosen this method in order to catch bream at specified periods of the year, you must clearly understand the behavioral characteristics of this fish: parking places, routes of movement through the reservoir, active biting times, gastronomic relations to certain baits and attachments, and much more. In this article we will examine these and other issues in detail.
Where to catch bream
Like any other peaceful fish, the bulk of medium and large bream like to move through the same places, including channel edges, drop-offs, entrances and exits to holes on the bottom, where the current slows down or even stops, around underwater rocks and driftwood.
Fans of bottom and float fishing look for such places and patiently wait for a school of bream to appear. One pecked, which means another one will appear soon. Fishing with a feeder in such conditions has a certain advantage. You will not only attract a school of bream, but you will also be able to keep it in a certain place using special feeders with bait.
Using the advice of experts in this matter, fishing for bream should begin with studying the bottom topography using a spinning fishing technique. This will allow you to find out the presence of holes, drops and rises, in general, information about those places where there could potentially be an accumulation of bream.
Most often on the river, feeder lovers cast bait on a distant riverbed dump. If there is a lake in front of the fisherman, then the cast occurs into a hole or onto the so-called table. The most important thing to remember is that any change in the relief is of great interest to the fish, which means that this is where our bait should appear.
Where to catch bream in July on a feeder
In different reservoirs, bream in July prefers to be in places that can differ significantly. But they have one thing in common: these places have great depths.
On summer rivers, bream likes to be at depth in a calm environment (Don River). The current prefers a slow bottom with large areas of silt or sand. Basically, these are backwaters near a cliff or bend with an opposite current and small whirlpools. Searching for prey in these areas can yield good results and increase the chances of catching a large specimen.
In some ponds or lakes with stagnant water, fish choose areas with the presence of vegetation, great depths or holes (Seversky Donets River). When eating plants, you can hear sounds reminiscent of “chomping” from the bream. This is how they often find themselves.
Schools of bream may be located under a steep bank, avoiding rocky bottoms or large accumulations of shells. If you manage to catch a bream or an adult, then the whole flock is nearby. To search for food, bream makes small forays, but can often return to their favorite places more than once. If you manage to find such a place, then you can catch bream in it again.
In reservoirs (fishing on the Tsimlyansk Reservoir) they prefer to be near steep cliffs, or go to calm areas to search for food. A large amount of food can be found above the dam, where many fish often feed.
In most reservoirs, bream prefer to be located at a considerable distance from the shore (Karelia). But in the morning or evening they can move closer to the shore to search for food. The abundance of bubbles in the water near the shore can indicate the location of the school.
In large bodies of water, at night in July, bream can move to shallow areas and swim near the surface. It is indicated by the rare appearance of fins on the surface of the water or bubbles in the water. At the end of splashing on the surface, the bream will mix to depth.
Has the bream spawned? And when?!
Bream begins to spawn long before most fish. They begin to leave for spawning grounds in late winter or spring. This happens along with abundant food and the chance of catching bream becomes higher. The fish waits until the water temperature rises to normal and begins to actively look for a place to spawn. Mating games and the fight for females begin. The prize goes to the largest individuals. At this time, fish are divided into age categories, in which individuals are of the same size.
For laying eggs, females prefer places where water is available only during the spring flood. These are mostly flooded valleys or meadows. The places may be in a different place, but they must have vegetation. These are fallen trees, reeds, reeds and other types of plants on which the eggs will be held.
Feeder equipment for bream
In the minds of many, especially spinning anglers, a fan of feeder fishing is a fisherman with a fishing rod and a chair. However, if you take a closer look, a real feederist’s kit includes a lot of other fishing gear, most of which are selected for a particular fishing activity.
Let's take a closer look at the rigging of a bream feeder.
Rod. So, the best choice for this type of fishing is a carbon fiber rod with a cast weight of up to 120-180 grams (depending on the strength of the current and casting distance). According to some reports, bream is a deep-sea river fish, which means that for successful fishing you will most likely have to make long casts.
Experienced anglers can use fast action blanks, but for beginners the slow action is ideal. This is explained by the technique of throwing heavy feeders over a long distance. As for the length, the optimal option is considered to be 3.6-4.2 meters.
Coil. Most often - inertia-free, with metal bearings in the amount of at least five pieces.
fishing on the feeder» />
The choice of spool is either straight or tapered. If you have to throw a load far, then its sides should be low. Size from 4000 to 6000. The weight of the coil should be about 400-500 grams. The clutch can be used both rear and front - whichever is more convenient for you. Gear ratio 4.5:1 - 5:1.
Cord or fishing line. Both monofilament line and braided cord can be wound onto the spool of the feeder reel. The thickness of both the first and second options depends on the fishing conditions.
If you have chosen a river as your fishing spot, then it is better to choose a braided line, which will float less in the water column. In this case, the optimal thickness is 0.12. This diameter has a breaking load of at least 5 kg, which is more than enough when catching bream on a feeder. The thinner the diameter of the main line, the lower its windage and the more accurately bites can be read.
Feeder. For most feeders, the feeder is a consumable item. Therefore, there should always be several pieces in stock with different weights, shapes and volumes of loaded bait.
For an average river flow, the initial weight of the feeder can be considered 40-60 grams, optimal 60-100 grams.
Leash. It must be made from monofilament, the length is at least 50 cm, and the cross-section is about 0.12-0.16 mm. If the water is crystal clear, then the cross-section can be reduced, but do not forget - this will increase the possibility of a break.
Hook. When catching bream on a feeder on a river in summer, most athletes advise using small hooks. The fact is that they are easier to disguise with bait, which means that the bream is more willing to swallow it and get hooked.
However, do not forget that a small hook can easily jump out of the mouth of a large bream during hooking. It is important to understand that there is no middle ground, but there are some recommendations that depend on the nozzle.
- Bloodworm. Optimal size No. 18-16;
- Maggot. This attachment can be used either one or several per hook. The size in this case is No. 14-10;
- Corn. With this type of bait, the optimal hook is No. 14-8;
- Worm. It is important here that the fore-end is of medium or long size: No. 10-8.
Equipment for bream
Without going into the details of the equipment of the float fishing rod, bottom tackle, it should be noted that they must be selected taking into account the “suspiciousness” and caution of the bream, if something scares it off, it will not return, stubbornness in attacking the bait is not its element, this pike can attack the lure repeatedly, but if the bream suspects something is wrong - it sees the fishing line and pricks itself on the hook, then there will be no catch. Knowledgeable bream fishermen choose a fishing line no thicker than 0.2-0.25 mm, a hook No. 5 or less if they are catching white bream. The leash should be used up to 0.15 mm. As we have already said, the bites when catching bream are not as active as those of carp, hybrid, crucian carp, so often the fishing line is strong enough, but if you come across a trophy specimen, you should use a friction clutch, but do not loosen the fishing line too much, this can lead to a slip. The necessary gear and other goods for tourism and fishing can be purchased on this site.
When catching bream with a float, it is advisable to use a longer rod so as not to hit the water too hard, but to gently lower the bait, and also to “reach” deeper places. If you use a feeder or other bottom tackle when fishing for bream, then the requirements for the rod are not so strict, the main thing is convenience and accuracy of casting, however, “oak” spinning rods with a large dough will not allow you to control the fishing, and too thin ones can break when casting heavy feeders. Therefore, if you are fishing for bream in the current and using heavy feeders and weights, select the appropriate rod test.
Bait for catching bream on a feeder
When catching bream on a feeder, bait can be prepared in two ways - buy it in a store marked “feeder” and “bream” or make it yourself.
Let's consider the first option of bait for bream, since the second one requires a whole article. The seller may offer several types, with different properties. In addition to the bait itself, he will definitely try to impose a flavor on you. You need to be careful with these miraculous “goodies”. The fact is that in cold water they may not attract fish, but on the contrary, scare them away. In summer it's a different matter.
If you nevertheless decide to take a flavoring, then know that in late spring on a feeder on the river, as well as in the summer, this fish responds very well to such aromas as dill, anise or vanilla. As for “sweet aromas,” bream loves caramel, biscuit or strawberries.
The main rule is that the bait for bream at the bottom should not remain inside the feeder all the time, or not be washed out immediately, within a couple of minutes. There must be something in between. That’s why fishermen advise – don’t over-moisten it while kneading.
Large bream on the river. Video
An educational video from Alexey Fadeev about river bream fishing on a feeder. In it, Alexey spoke clearly about bait, equipment, feeding tactics and fishing techniques.
Fishing place: Volga River opposite Cheboksary. The situation is standard for many feeders: a strong current, high-quality bait and bait available, a promising edge is not difficult to find, but the fish bite is not as good as we would like. But if you take into account all the nuances of feeder fishing, as Alesey does in the video, then you can successfully catch bream on the Volga.
3' 30'' Mixing bait. It is better to mix the bait for the current in advance so that the bait can brew. Alexey prepares bait before searching for a fishing spot.
For fishing in the current, you need inert food. 3kg of bait for a river is not much. The purpose of fishing is to catch bream on a feeder. This fish loves to eat, especially since humpback bream up to 3 kg are found in this water area. Therefore, Alexey mixes 3 kg of bait based on ground crackers and biscuits, moistened with 0.5 liters of caramel syrup.
6' 40'' Rods and equipment. For a river with a strong current, the feeders must be appropriate. In this video about the feeder, Alexey uses heavy feeders with 150g dough and a length of 4.5m. Two feeders with the same braid, equipment and equal casting distance.
Fishing on a steep edge can lead to breakage of the equipment. Therefore, it is better to prepare two feeders with the same casting distance.
8' 00'' Equipment for catching bream on the river. In this video, Alexey Fadeev uses an inline with a 15 cm bend on a 0.3 mm monofilament line. Shock leader made of 0.19mm braid. Bullet feeders 60 and 80g.
10' 00'' Finding the best place to fish. At this point on the Volga, bream stands on the far edge at a distance of 60m from the shore.
12' 00'' Starting feed. Before starting fishing, you need to send 1/3 of the bait without live components to the selected point. Maggots and bloodworms must be added to the bait correctly, and Fadeev does this during the fishing process.
Good accuracy of casting a feeder is one of the main factors for successful bream fishing.
13' 00'' Start of fishing. After the starting feeding, drowned maggots and chopped groundbait bloodworms are added to the feeder. And immediately the first kilogram bream is on the hook.
The interval between casts when fishing for bream with a feeder is 5-10 minutes. It is at this rate that a bait spot will remain on the bottom.
Bream on the feeder on video
To catch large bream you need to use its natural curiosity.
It is better to alternate bait for bream. The fish show more interest when the bait on the hook or the order of the components in the sandwich changes. It is also useful to use dips.
As a result, in a few hours two dozen excellent bream were caught using a worm and maggot. I take into account that the weather was constantly changing: now it was raining, now the sun was coming out - the result of the fishing was not even bad.
Features of feeder fishing in spring and summer
The bite of bream on the feeder is felt almost immediately. The rod tip will bend almost immediately. Bream does not like to “talk” to the bait for a long time.
However, you should not rejoice ahead of time. Bite, hook and fight! Spring bream does not give up on the feeder without a fight. He will immediately pull into the center of the fairway, begin to turn his body across the current and, using its force, will try to go as far downstream as possible.
Therefore, it will be possible to catch a bream and get it to the surface only after a struggle, having exhausted the fish with the clutch and movements of the rod. You only need to take it in the landing net and then very carefully! The fact is that a weakened fish can make one last attempt.
