Do-it-yourself spinner Ulyanka video

Ulyanka spinner

Homemade spinners, for example, such as the Ulyanka spinner, are often superior in catchability to many products from famous companies.
Making homemade baits is not always a technically complex process, and making such a lure is quite within the capabilities of a person with average craft skills. Many experienced fishermen use not only purchased baits to equip their spinning rods, but also homemade ones, for example, such as the Ulyanka spinner.
Creating homemade spinners is a very exciting activity, sometimes real works of art come out of the hands of craftsmen. Sometimes the products of original bait designers evoke admiration among fishermen for their engineering solutions. The Ulyanka spinner is just an example of an unusual, but, as it turned out, successful technical embodiment of an interesting design of homemade spinners.

Making an Ulyanka spinner with your own hands - features, types and tips from fishermen

Today there is no need to spend a lot of money on purchasing newfangled fishing gear.
Because you can create the most catchy and high-quality baits with your own hands from a small amount of materials. Further in the article you will learn how to make a real work of art in a short time using available tools and tools, which will become a reliable assistant on any fishing trip. By creating a lure with his own hands, the fisherman involuntarily transforms into a real designer. After all, some models are simply a work of engineering art. It’s not for nothing that their founder had a technical education. Only a truly talented person could have thought of creating such an original and effective bait.

Homemade spinners

Actually, creating the simplest homemade spinners is not that tricky. For example, a bait made from a spoon has worked well for fishing.

So, to make a homemade spinner we will need:

spoon made of steel or cupronickel;
electric drill with a drill with a diameter of 2 or 3 millimeters;
file;
tee hook;
two winding rings.

In order to make the simplest oscillating bait from a spoon, you need to do the following operations:

For the spoon we want to make, we only need the handle of a spoon, so we saw it off with a file or other metal cutting tool;
The resulting workpiece should be shortened by a couple of centimeters, the edge of the cut should be carefully processed with a file;
The workpiece can be given a slight bend so that the future bait “plays” in the water;
We drill a hole in one and the other end of the workpiece;
We insert winding rings into the holes and attach a tee to the wide part of the workpiece. You can attach pieces of red fabric to the tee to attract the attention of a predator. That's it - the simplest oscillating spoon is ready.

The remaining part of the spoon without a handle can also be used as a blank for creating a spinner with your own hands. To do this, you need to file the place where the handle was cut, drill holes, insert rings, and insert a tee hook on the wide side.

Creating simple spinners with your own hands from scrap materials is not so difficult, if you have the desire. Of course, it’s easier to buy a spinner in a store. However, imagine the delight you will experience when you catch a pike or other predator with a bait made from an ordinary spoon.

Making an oscillating spoon

Making your own oscillating bait is not difficult. You just need to decide on the available materials. After all, in principle, the creation of gear has the goal of saving on the purchase of new products, thanks to its production from scrap materials.

From the handle of a steel or cupronickel silver tablespoon

With the help of a tablespoon, you can make a homemade product with almost perfect body symmetry. It is perfect for wiring in the thickness of the aquatic environment.

Step-by-step instructions for making gear:

To begin with, it is recommended to saw off the spoon from the handle and carefully file the edge. But before that, it should be reduced in length by two centimeters.
Create two holes in the blank and rig the bait.
In this case, it is very important not to neglect the dimensions and quality of the equipment used. That is why the ring connecting the bait and the tee is recommended to be selected a couple of times larger than its hook counterpart.
The tee is mounted on the wide tip of the handle.
To make the bait more catchable and effective, polyethylene strips of different colors are additionally attached to the tip of the tee. Disposable bags can be used as starting material.
The equipment is ready!

From the rest of the teaspoon (without handle)

From one spoon you can make two wonderful models that can effectively prove themselves in a game with a predator.

Step-by-step instructions for making a spinner:

The workpiece is carefully filed at the cut site using a needle file.
A hole is created at each edge. Ready!

To ensure effective play of the bait, it is recommended to connect the spoon to the tee using a ring a couple of times larger than its hook “comrade”, as in the previous version of the homemade product.

An analogue of the Devon spinner is made from the handle of an aluminum spoon.

This exclusive model is created similar to the one indicated above (for a steel or nickel silver handle). It is perfect for asp fishing.

From an aluminum teaspoon (without handle)

To create your own tackle from an aluminum spoon, you need to use the step-by-step instructions indicated earlier. All manipulations in this case are identical. The only difference is in the wiring of the bait itself. Thanks to its manufacturing material, the homemade product produces a specific sound during the wiring process. By the way, this is very attractive to such a predator as pike.

From brass or copper blanks

If you have small pieces of brass or copper, you can make homemade fishing gear.

To do this you need to follow the following instructions:

Make small blanks similar to bleak. They should be in the shape of a rhombus or an oval.
A hole is drilled on the thin edge of the homemade product for further attaching the bait to the fishing line.
Using the extrusion method or embossing, make the future lure a slight bend.
The edge with the hole where the hooks will be fixed is covered with solder. Plus, this will make the workpiece somewhat heavier.
The opposite side is sanded well. The spinner is ready!

Bimetallic spoon

This bait is made on the basis of two main materials, the so-called galvanic pair. The most commonly used are copper and aluminum alloys. Although they are affordable, they are not durable.

This homemade product is created from two identically prepared parts with small holes. They are connected with rivets to achieve the desired shape of the product, and their final form is achieved by stamping. To make the bait aesthetically attractive, it is ground and polished. Ready!

Tubular spoon

The name of the model itself speaks about the main material used - a small diameter pipe. It is most often taken from metal. It's accessible and inexpensive.

How to make a homemade tubular product?

Take a small piece of pipe and make both edges at a slight angle. Moreover, they must be different.
Finish these edges well with a file and sandpaper.
Make one hole on both sides.
All that remains is to equip the workpiece and everything will be ready.

But here you need to adhere to a small rule: a monofilament thread is fixed to the end with an acute cut angle. This is the only way the homemade product will scour in different directions during the posting process, reminiscent of a fish that is actively rushing and thrashing in a pond.

Tubular compound spoon

This model is a slightly improved version of the previous model. She will prowl even more actively and stronger. Structurally, the tubular composite bait is presented in the form of three parts that can produce separate movements from each other. Each side of the homemade product is well sanded and bent so that during the wiring process the tackle completely resembles a fry.

Corrugated spoon

Creating this kind of homemade product is possible both using the embossing method and by using an existing corrugated pipe. This bait is made exactly the same as the previous two options. Holes are drilled at both edges of the workpiece and a monofilament with a tee is fixed. But practice shows that it is this method that allows you to produce the most effective fishing gear.

Ultralight microvibrators

Such baits are created identically to their bimetallic counterpart. The only difference is that special attention is paid to the processing process at the final stage. The edges of the homemade product are rounded with a file, and its outer surface is practically reduced to nothing at the end. Then everything is further polished and polished. And only now the vibrator can be called ready!

About the Ulyanka spinner

Sergei Ulyanov invented an unusual spinner design several years ago, so his name is quite rightly included in its name. The co-authors of the original bait are Sergei’s friends: Elena Morozyuk, Dmitry Babanov. Obviously, the fact that Sergey has an engineering education helped him create the original design of the bait. Ulyanov's bait consists of two plates, movably connected to each other using steel wire. In the rear part the bait is weighted with a weight, and in the front part a tee is attached to a wire bent into a ring. If you look at the assembled bait from the front, it will resemble an inverted letter “T”. The upper plate resembles a comb.

In order to assemble “Ulyanka”, we will need to acquire:

an ordinary oscillating spoon, from which both winding rings have been removed;
a metal plate from which the comb will be made;
steel wire, with which the comb will be connected to the main body of the spoon;
a lead weight with which the bait will be loaded in front;
winding rings and a tee hook.

Three holes are drilled in the upper part of the comb and closer to the weight; a leash with a fishing line or cord will be attached to one of them using a winding ring.

Making a spinner-balancer

The balancer is a bait for winter fishing, although it can also be used in the summer, in cases of vertical lure. Based on the design features, this bait really resembles a small fish, since its play is more directed in the horizontal plane. There are hooks attached to the front and back of this fish. In addition to them, the bait also has a tee, which is attached to the belly of the bait.

Despite this, the balancer can be of any shape. In this case, it should be remembered that the balancer has its own design features and one should not deviate from the rules for its manufacture.

As a rule, the body of the balancer is cast from tin or lead. As a form, a piece of wooden block is suitable, in the body of which, using a chisel, a recess is selected, the shape of which resembles a fish. There is also a recess for hooks. Finally, the mold is coated with rosin, after which all elements are installed in place and filled with molten metal.

The balancer can have different sizes. In this case, it all depends on what kind of fish the bait is intended for. If you want to catch a perch, then a balancer up to 5 cm long is enough, and if you plan to catch pike or pike perch, then a 7 cm balancer is more suitable.

After cooling, it is better to check the quality of the hooks, and then modify the bait by painting it in any color or several colors.

Where, how and what to catch on “Ulyanka”

In the few years that have passed since the invention of Sergei Ulyanov’s signature bait, fishermen have managed to explore the possibilities of the new product. It turned out that Sergei’s original bait catches all freshwater predators.

If you equip your spinning rod with an Ulyanka spinner, your trophy may include:

pike;
zander;
perch.

The spoon showed itself well both when casting and when using the trolling method. Trolling fishermen said that the Ulyanka fished well at a variety of depths. One of the amateur fishermen boasted that he caught a pike with it at a depth of 18 meters. Practice has shown that if you catch a predator by casting, then it is better to attach the “Ulyanka” to the middle hole on the ridge, and when trolling, to the front hole. It is useful to vary the pace of retrieving the bait. You can use jig methods for baiting.

Tricks of fishing with "Ulyanka"

The invention of S. Ulyanov is among the universal spinners that can be used to successfully catch all freshwater predators: pike perch, pike, perch. By testing “Ulyanka” for several months, you can be convinced of its effectiveness.

One of the properties of the spoon is its ability to move away from the fisherman when the fishing line is weakened, pulling on the cord. Therefore, when performing a series of pulls with slowdowns, created without reeling, the cord is tightened due to the wagging of the bait from side to side or when lowered to the bottom. With such movements, it becomes possible to leave the bait on a promising area, without tipping it to the bottom.

In addition, while moving the bait near the surface, it is possible to slow down, during which it sinks to the bottom, creating characteristic vibrations. In this case, it is worth taking long pauses, because the bait, especially with a taut cord, moves very slowly.

To additionally attract a predator, it is possible to bring the spoon to the surface of the water. The speed of the wiring should be approximately the same as when wiring near the surface. At the same time, uniform movement of the bait on a plane attracts fish least of all.

This is due to the fact that during an equally dependent stroke along the plane, after its nasal lobe is above the plane, the sweeping frequency is replaced by fluttering oscillations. Therefore, to create vibrations in calm, windless weather, to create constant disturbances, it is advisable to alternate short sections of bait fishing under the water plane with constant transitions to the surface.

If you are using a spinner as a non-hooking bait, you should choose “windows” in the vegetation where you should throw the bait. Retrieving begins immediately after casting, preventing the bait from sinking to the bottom. In this case, the spoon should be brought to the surface, avoiding its immersion in the thickness of the vegetation.

Making a front-loaded bait

To produce a homemade spinner, no special knowledge, skills or materials are required. An ordinary tablespoon is ideal as a workpiece; in addition, you will need tools and a few additional parts:

Electric drill.
Drill with a diameter of 2−3 mm.
File.
Tee hook.
Two winding rings.

Making the Ulyanka spinner with your own hands, the drawings of which you can develop yourself, is made directly from the handle of the cutlery. Operations are carried out in the following sequence:

Saw off the handle of the spoon.
File the edges of the workpiece.
Give the handle a slightly curved shape so that you can “play” with the bait.
Drill holes at the ends of the workpiece.
Attach the winding rings to the holes.
Tie a tee hook with a piece of red fabric to the top ring.

When the oscillating spoon is ready, you can begin testing on a natural reservoir. Based on feedback from fishermen, it becomes clear that the Ulyanka bait works well at any depth; diving is ensured by the weight of the spinner head, the weight of which can be 3-18 grams.

According to its design characteristics, the Ulyanka spinner is universal and belongs to devices for catching fish of any species. The bait is suitable for posting in different ways:

A special feature of the device for fishing is active vibration even with slow retrieval. Due to the plate in the form of a ridge, as well as due to the oval, slightly concave shape and parts moving freely relative to each other, the spoon is mistaken for lunch by predatory fish. Depending on which hole the line is attached to, the bait vibrates with different frequencies and forces when trolling.

Design Features

This is a universal predator bait. When fishing with the Ulyanka, both hard and softer rods are used. With each cast it flies quite far. We make several slow revolutions and let it sink to the bottom. This lure can be fished both by trolling and casting. In the front part there is a weight that allows it to go deeper.

In order to make Ulyanka with your own hands, you will need:

Drawings, which you can get from the developer’s website, will help you understand the intricacies of creating bait.

Homemade Devon tackle

Since its birth, the Devon spinner has gained popularity among fishing enthusiasts. You can do it yourself in your own garage. The bait is powered by a turbine assembled from scrap materials. To assemble the device you will need:

Beer can for making an aluminum turntable.
Wire frame.
Lead pellets.
Carnation.

Apply the outline of a small propeller to the can, bend the workpiece in the form of a screw, and punch a hole in the middle of the part with a nail. Make a frame out of wire, tie a small tee hook on one end, and string pellets on the other. Tie a knot in the wire, then attach the propeller. The prepared structure can be painted in the desired color.

Homemade fishing spinner

You can easily make this fishing tackle from an ordinary tablespoon.
An economical option, made according to all the rules, will not be inferior to the purchased spinner bait, the drawings for the manufacture of which are made by hand according to individual sizes. This is a catch device of simple design. To complete the gear, you will need to purchase several parts manufactured in industrial conditions. To make the device, you can use not only cutlery; an aluminum tube, a spoon handle made of cupronickel or stainless metal will do. The popularity of the tackle is due to the fact that the workpiece can be found in any home. The main condition for choosing a material is the absence of traces of oxidation and rust upon contact with water. Otherwise, the lure will have to be polished each time before use.

When planning to make bait at home, you should take into account that it is not always possible to get a high-quality noise lure from a spoon. In this case, preference should be given to a workpiece made of an aluminum tube, into the cavity of which it is recommended to add shot. When trolling, tube gear produces noise and vibration, attracting the attention of fish.

An ordinary tablespoon is suitable for the production of not only “Spinners”; the blank will make a micro-spinner for perch. When manufacturing the device, you will need a set of consumables:

Spoon.
Thin strong wire.
Rings for hooks and braids.
Double or tee hooks.
Swivels.

DIY copper spoon

At home, you can make an equally effective spoon from copper or brass.

If you decide to attract the attention of predatory fish with a spoon, you need to make a spoon following the instructions:

It is necessary to make a shape from metal that vaguely resembles a fish;
You need to make a hole on both sides of the spoon;
The spoon needs to be bent a little, giving it a more natural look;
In order for the spoon to have weight, a prope is applied closer to the wide part of the spoon;
To give the lure a more aesthetic appearance, the workpiece is smoked;
A hook is attached to the spoon. The spinner is ready.

Universal vibrator

To make your own spinner spoon model, you will need strips of metal of different thicknesses, strong steel wire, a sinker with through holes, beads, and a tee.
The work is carried out using metal scissors, a drill, sandpaper, wire cutters, and pliers. The production of bait begins with the manufacture of parts. It is recommended to start the production of a spinner by cutting out a petal from a strip of metal. To create the outline of the workpiece, a paper template with an adhesive base is used. A hole is made on the cut out part to the diameter of the clamp. The shape of the petals is given by the impact of a bearing ball. If you plan to produce a series of “shaker” or “torpedo” spinners, then a matrix made of lead or wood and a punch would be useful.

The next stage is the production of the clamp. The technology consists of flattening the metal and drilling two holes along the diameter of the rod. The shape of the clamp can be in the form of an oval bent in half on a thin frame. The work process is carried out with pliers. After determining the location of the weight on the Ultralight spinning spoon, you can begin to produce the appropriate type of bait. The spinning rod with its components is usually equipped with a single hook.

Recommendations for choosing gear

Today in the Kotofey online store you can buy oscillating spoons made of light and soft materials, but choosing tackle with the necessary parameters is quite difficult. The variety of models created for scatter fishing, towing or surface fishing, differ in shape and method of execution:

Prokhovka. For catching salmon fish.
Ural. For fishing salmon and pike.
Crocodile. For catching small and large predators at any depth.
Cobra. Small in size, allowing you to make long and short casts to asp.

When choosing the type of spoon, it is necessary to take into account the location of the reservoir, its type and climatic conditions of the region, as well as the fisherman’s ability to cast gear. Due to the fact that the “oscillator” has a post with several hooks in its design, the tackle can cling to the fishing line.

How to Make Ulyanka Spinner

Rules for the production of homemade lures for perch

How to make a lure for perch, and what are the main requirements for them? This is the question that, over time, is asked by newcomers who have tasted all the beauty of catching this lively predator. Not all branded baits are suitable for certain conditions on a pond, and many cost a lot of money. Therefore, the fisherman’s desire to do something with his own hands is completely understandable.

We are talking mostly about turntables, since they are easiest to make with your own hands, without having rich abilities and specialized devices. In fact, every spinning angler, with small tools and materials, can independently make a catchy spinning spoon for perch.

Requirements for spinners

When catching any predator, all baits are subject to a number of basic requirements, without which it will be difficult to catch fish. Perch is no exception, and a spinner for fishing for it must meet the following aspects:

The size of the bait is small, otherwise the predator’s bites will be rare.
The spinner should work even on the most leisurely retrieves.
After contact with underwater obstacles, the petal's play must resume.
The turntable should start immediately after wiring starts. It's even better if it starts working in free fall after splashdown.

It can be carried out against, down or across the flow.

What does it consist of?

A spinner for perch is a structurally lightweight bait consisting of ordinary parts that can be easily made by yourself from available materials. The basis of any spinner is the petal. The nature of the game and the area of implementation depend on its shape and size.

Narrow petals have a small angle of difference and are designed for catching perch in strong currents. They have low drag, so they can even be carried against the flow.

Rotating spoon and its types

Rotating baits are the most common spinning equipment. In common people you can hear such a name as “turntables”. It is the same.

The main advantage of such a spinner is that for a high-quality game you do not need any special skills from the fisherman. Although it is primitive at first glance, it is very effective for fishing. Very often such elements are recommended for beginners. After all, everyone wants to catch a good catch, even those who came to fish for the first time.

Spoons with turbines

First of all, it is worth noting that this bait is perfect for ultralight. It can be purchased at any specialized store, or you can make it yourself.

Stages of creating a spinner with turbines:

1. First, we will start making the petal. To do this, we need metal, for example, from a car telescopic antenna or another sheet no more than one millimeter thick. 1.1 Draw a small template on cardboard and cut it out. It is from this blank that we will make a sketch on a metal sheet. 1.2 After we have the workpiece, all edges are carefully processed with a needle file. 1.3 We make holes at both ends of the homemade product and remove any burrs that appear. 1.4 We bend the sides with holes to the petal area. The petal is ready! 2. Glue a tee to a stainless steel wire with a diameter of no more than 1.5 mm. 3. Then we wind the bead and the petal itself. 4. We make a slight bend in the subsequent loop to fix the monofilament at the required distance from the top of the petal. Moreover, in this case it is necessary to eliminate the obstruction to the rotation of the load of the tackle itself. 5. Only then can you begin to secure the load on the twist of the loop itself. Due to the asymmetry of the load, the monofilament thread will not twist. 6. After slightly bending the wings to match the shape of the propeller, the bait is completely ready for new achievements. This tackle is perfect for catching perch, pike perch and chub. If its dimensions are slightly increased, you can even catch a trophy specimen of pike.

Petal spinner

The petal is the most attractive part of the bait, since the speed and nature of vibration of the entire equipment will depend on its design and shape. Moreover, the predator will examine and evaluate such tackle from a very impressive distance. Rotation of the petal at a large angle will cause the strongest vibration, while with a decrease in this parameter, the activity of the bait will decline.

Having caught 237 kg of fish, the poachers were not punished!

During interrogation, the detained fishermen revealed the name of the secret bait. Read more…

The shape of the petal of the tackle is also of great importance. There is an unwritten rule: the narrower the part, the stronger the speed of its rotation. Accordingly, the game is more active.

Tips from fishermen regarding the use of individual models:

if you plan to fish at great depths or in a body of water with a strong current, it is best to give preference to a model with thin narrow petals;
whereas in shallow water and in standing water, specimens with wide, spreading leaves are perfect.

But there are also negative sides to using this type of equipment. This is primarily the sticking of the bait petals. Because this minimizes all the efforts of the fisherman to catch fish. The ease and speed of winding the tackle leads to its slow wiring. Only in this case is it possible, without disrupting the rotation of the petals, to change the height of the spinner itself.

There are also models that additionally have a front sight on the tee. The latter can serve as another irritant for the predator, and can influence the stabilization of the equipment during the wiring process. For the most part, it is a fly or a small tuft of red fur.