Who is this chebak?
Chebak is a Siberian roach , lives in lakes and rivers of the Urals, Siberia, and the Far East. Belongs to the carp family and is an object of industrial fishing.
Chebak quickly reproduces and grows, reaching the spawning age of 3 years. The female lays up to 10,000 eggs.
The usual weight of chebak is 100-300 grams . Occasionally you come across specimens weighing under 1 kg.
Why do many anglers prefer winter fishing?
In summer, Siberian roach are dispersed throughout the reservoir. Most often it can be found in coastal areas near thickets of aquatic plants. With such dispersal, it is not often possible to catch large fish.
In winter, fish gather in large schools. Since fish of all sizes are represented in a school, having discovered a school, it becomes possible to catch large individuals .
Preparing winter gear
When fishing for grayling in winter, it is much more important to choose the right gear than the size and shape of the fishing rod.
- Fishing line. Having noticed a thick fishing line, the fish may get scared and swim away. Professionals choose fluorocarbon fishing line (0.14-0.18 mm, it can withstand weight up to 1.5 kg).
- Nozzle. For live bait, take maggots, bloodworms, pieces of worms or burdock larvae. Use a bait that is found in the selected reservoir, because the fish will not show interest in bait that it has not previously encountered.
- Nod. Choose one with a large vibration amplitude. This will allow you to quickly respond to the signal about the start of the bite.
- Hook. The optimal size is No. 3-6, depending on the size of the catch.
- The leash is equipped with an artificial front sight, which increases efficiency.
- Spoon. A small spoon is enough; oscillating or spinning fly spoons are suitable. A large individual that has reached the age when the predator instinct wakes up bites on the spoon.
When to catch?
The fish's zhoring begins before spawning in May.
Another time of increased activity is the first and last ice.
As soon as you can move safely on the ice, you should go fishing for Siberian roach.
The chebak is active until the pond is covered with a dense blanket of ice and snow. Dissolved oxygen becomes low, the fish are inactive.
The lazy period is short-lived, ending in mid-February. The Siberian roach begins to gradually emerge from the pits.
Catching chebak at the end of winter
Winter is coming to an end, the air temperature is gradually rising, roofs are beginning to shed “tears of joy”, just a little and the thaw will eat up the last ice. At this time, all winter fishing lovers go to the reservoirs to please themselves with a good catch. The last moments of winter give fishermen a lot of emotions, because all the fish become more active and begin to confidently attack the hook with bait. In this article we will talk about catching chebak or roach, whichever is more familiar, bait and groundbait, which is used during fishing.
There is a great chance of catching a trophy, sparkling chebak, which can reach a weight of 300 g. In the spring, despite the high probability of catching a chebak, even in this happy time, funny things happen to fishermen and some fishermen come home empty-handed. How to explain this? – there may be several main reasons, the main ones of which are: the wrong place for fishing, bait and bait, as well as rough gear. To ensure that your exit to the last ice is successful, we will analyze the main aspects and nuances that will ensure you catch the handsome chebak.
Weather and time of day
In summer the chebak prefers gloomy weather, in winter it prefers sunny days. This is not an axiom; in each body of water, the weather can have a different effect on the activity of fish.
More predictable feeding hours are early morning before sunrise and immediately after it, then an afternoon siesta, after which the chebak usually wants to have a hearty dinner before sunset.
The activity of the Siberian roach fades along with the last ray of sun.
Catching a chebak with a fishing rod
Home > Fishing techniques > Catching chebak with a fishing rod
To begin with, you need to decide on the choice of gear, as this will affect both the convenience of fishing and the catch. First of all, you will need to choose the length of the fishing rod. Most who fish from the shore use a fishing rod five to six meters long. This length is optimal, since the chebak prefers the coastal part of the reservoir. The weight of the fishing rod is also important! It is best that the fishing rod is not heavy, as it will be easier to handle and your hand will not quickly get tired of holding it.
After selecting the fishing rod, you should proceed to selecting the fishing line. The best option is when the main line runs from the fishing rod, almost the length of the fishing rod, and at the end, about twenty centimeters long, a leash with a smaller diameter. The diameter of the main line should be calibrated from 17-25 hundredths of a millimeter, and the leader from 12-17 hundredths of a millimeter.
Whether you fish with a float or not will be your choice, since fishing with or without it will not reduce your catch in any way, it only affects convenience. Although, if the bite occurs almost after lowering the rig, then it is better to fish without it, holding the fishing rod in your hand, this way you can increase the hooking speed, thereby getting a much larger catch.
Selecting hooks is very easy! The hook should be thin and not large; you can also use a jig. It should be without any coloring, with a slight sting.
The next stage of preparation for fishing for chebak is the selection of bait. Here, in principle, everything is simple, in standing water you need small food. With a small current - loose and small. In case of strong currents, feed should be mixed with silt so that it spreads gradually in the reservoir. For convenience, you can resort to feeders, in which you can put the necessary food and throw it near the place where you cast the tackle.
The best bait is live bait, it can be either worms or maggots with bloodworms. But also, the chebak will not refuse if you offer him bread, corn or barley.
After preparation, it’s time to select a place for fishing.
In the summer it is quite easy to find a place to catch chebak. It can be found in places with vegetation where the depth is more than ninety centimeters. And also in places where there are fallen trees into the water. Why exactly these places!? This is explained by the fact that in warm weather the chebak switches to a plant-based diet. So, for better fishing, you should resort to vegetable bait, but you should still have some live bait with you.
In autumn the bite will decrease more and more. You should catch it with live baits.
Happy fishing!
Winter fishing methods
You can catch chebak in winter using a float rig and a jig.
For a float fishing rod, it is better to use live protein baits:
- worm;
- maggot;
- mormysh;
- bloodworm;
- insect larvae.
Plant attachments:
- pearl barley;
- dough;
- bread crumb;
- semolina chatter;
- steamed cereals.
Expert opinion
Knipovich Nikolai Mikhailovich
Zoologist, hydrobiologist. I am interested in fishing at a professional level.
Important! Although plant baits are more often used for warm water, sometimes in the winter it is best to use a sandwich - a plant bait with flavor plus a live bait.
You can use a jig with the same bait as for a float rod.
As an effective method of fishing in winter, experienced fishermen use several winter fishing rods - 2-3 float rods plus a fishing rod with a jig.
Float rods with different attachments are used to identify the most effective one. Having determined the optimal nozzle, you can use it to attach it to the jig.
Tackle and bait for winter fishing for chebak
An integral component of successful fishing is the correct gear, bait and the layout of the angler’s fishing rod.
Fishing rod equipment
In winter fishing, a fishing rod is a bite indicator. The successful outcome of the entire enterprise can depend on its proper equipment.
Comfortable fishing will be ensured with a small, lightweight rod of medium hardness, equipped with a reel or with a supply of fishing line in the handle.
The use of thick fishing line is not justified due to the small size of the prey. It is better to use monofilament 0.06-0.12 mm.
For the nod, spring steel, lavsan, polyethylene, polycarbonate or wild boar wool are most often used.
The variety of gear is determined by the desire of the fishermen to catch - with a bait it is much easier to catch a chebak, and the best masters of their craft in Siberia can attract the attention of the fish only to bright colors and moving elements.
Advantages of jig fishing
Fishing without bait is difficult at first, but an exciting activity. To gain skills, you can study lessons on catching roach in winter with a jig, since the behavior of it and the chebak is similar.
If a jig is used, then the fishing process forces the fisherman to constantly set it in motion, attracting the attention of the roach, so this passive activity takes on an active form.
The method increases the likelihood of catching a large representative of the species, since there is no need to waste time baiting bloodworms.
Considering that in winter a school can settle at the bottom of depressions and not respond to bait, hiding in the pools of reservoirs, this method greatly increases the chances of attracting the attention of prey: which fish will not react to an unusual object moving from the bottom to the surface.
Choosing a jig
All jigs for winter fishing are divided into two groups - with bait and without reel (nozzle).
The most popular fishing is with a bait tackle, the hook of which is additionally supplied with natural bait. Even a beginner can handle this process.
Reelless products for chebak are similar to jigs for perch, crucian carp, roach, and have the common shape of a devil, jellyfish, boat or donkey.
The composition can be different: they are tin (the lightest), lead and tungsten (the heaviest). The stronger the current in the reservoir, the heavier the jig should be. For small lakes, tin is perfect.
Experienced fishermen began to notice the chebak’s preference for jigs of the same shape and color at different times of winter:
- In the first ice, it is better to use the following types: Ural, ant, nymphs and devils in black, purple or dark green.
- In the dead of winter, all types of fish are sluggish; biting during this period can only be achieved through the use of the smallest gear with bloodworms.
- During the period from February until the last ice, it is preferable to take with you small tungsten products in the form of a shot or a devil. Popular baitless baits include goats and ants.
Fishing technique and tactics
Fishing for chebak in winter begins with finding the place where the school is concentrated. Most often these are the deepest sections of the river. On narrow rivers such places are located at sharp turns. Finding depth in large bodies of water, especially for a beginner, will be difficult. You'll have to play a lot of holes.
To begin with, 5 holes at intervals of 10 m, into which complementary foods are placed, will be sufficient. Then a rod is installed on each hole and observation is made to see where the first bites will occur. If the search is unsuccessful, they take up the drill again.
The fisherman will find a fishing spot and designate the hole that he will use throughout the winter.
If a jig with bait is used, it is simply lowered to the bottom of the reservoir, periodically lifting it and returning it back. If during the rise the float stopped sinking or went down sharply, this means that the chebak is floating in the middle or upper layers of the reservoir.
A naked jig implies constant manipulation of the fishing rod:
- First, it is lowered to the bottom and slowly, with twitching, raised up.
- On the way down you need to do some gentle twitching. After lowering to a depth, gently raise it.
- The location of the school at the bottom of the reservoir limits the horizontal movement of the jig or its tapping on the ground.
- Posting and lifting alternate effectively with short pauses of 1-5 seconds on different planes.
It is necessary to take into account the chebak’s preference for smooth movements; if they are sharp, there is a chance of catching a perch.
Where and how to look?
Chebak can be found on large and small rivers with slow and fast currents, on lakes with currents and with standing water. On frozen rivers, the best place to look for a school of Siberian roach is a reach, a sharp turn in the river, known places with deep holes, barrels, and whirlpools. If the river is unfamiliar, then you will have to look for deep places, drilling holes diagonally or in a checkerboard pattern at a distance of 3-10 m from each other, depending on the width of the river.
On lakes with standing water, you should also explore deep depressions, holes, and snags. As a rule, it is in deep places that springs carrying dissolved oxygen flow .
Peaceful fish occasionally swim in snags - they look for food stuck from the summer and hide from predators. Most often, chebak can be found in snags along the first and last ice.
You should look for a fishing spot on the lake by drilling holes in a checkerboard pattern at a distance of 10-15 m from each other.
Where to catch chebak in winter
Like any other fish, the chebak chooses deep-sea places for wintering. Where there are the deepest parts of the water area, this is where you should look for this fish. Naturally, finding such places is not easy if you have to fish in an unknown body of water. As a result, you will have to spend some of your precious time to find a catchable place. To do this, you need to drill as many holes as possible (at least 10) at a distance of 10-15 meters from one another. When fishing each hole, you need to remember the depth. At the same time, you should not linger more than five minutes near each hole. This approach will allow you to determine the bottom topography. If the depth in all holes is almost the same and there is no difference in depth, then you can safely move to another place and start drilling holes. If you find a promising place and there is no bite, you can use bait. If the chebak bites without it, then there is no point in using bait.
With the approach of spring and the onset of thaws, the chebak begins to leave the pits and begins to be distributed throughout the entire reservoir. During such periods, you don’t have to look for it too much, since it can be caught anywhere in the water area, especially since there is always plenty of it in the reservoir. And if you consider that it moves around the reservoir in schools, then if you catch one fish you can count on a good catch.
Tackle
Fishing rod
You can use any winter fishing rods. The best option is the traditional balalaika.
Coil
An inertial reel with a stopper and winding of 20-30 m monofilament is used. This length of fishing line is needed for an unforeseen event - if the fishing line gets caught and breaks, then a long enough piece will remain for fishing.
Nod
There is a huge variety of nods from soft to hard for balancers.
For roach, a 14-18 cm long nod made of soft material , capable of providing smooth mid-frequency play.
A rigid, insensitive nod can be improved by slightly narrowing the wide part of the nod - turning it into a double-cone. The nod will become softer, the load will be evenly distributed on the nod form, which will ensure clear, stable play.
- Lavsan. The most popular material for making a gatehouse. The elastic properties of the nod allow you to smoothly change its rigidity by changing the length.
- Astrolon film. Used for making templates in printing houses.
- Plastic. Made from PET bottles. A soft nod for light jigs.
- X-ray. A hard nod for large jigs.
- Clock spring. Suitable for low-frequency, swinging play of medium and heavy jigs.
fishing line
The thinner the line, the better, but the determining factor is the expected weight of the fish. If it is known that the weight of roach in a pond is 100-300 g, you can use a fishing line of 0.06-0.08 mm. For roaches weighing from 300 to 800 g, a fishing line with a cross-section of 0.12 mm is suitable. If there is a possibility of catching heavier trophy specimens (the record weight of a chebak is 3 kg), you can use a 0.18 mm fishing line.
Material for jigs
- Tin – light jigs 0.1-0.6 g for playing in calm water at shallow depths.
- Lead - medium and heavy jigs 0.4 -1.5 g for use at depth and in currents.
- Tungsten - heavy jigs 1.5-4 g for deep places and fast currents.
Which material is better?
Chebak prefers deep, quiet places in winter. For such places, lead jigs weighing 1.2-1.5 g are quite suitable.
Roach is a cautious fish; a jig that is too heavy will alert the fish.
Tungsten is an expensive material.
Most anglers use either lead jigs for holes, or tin jigs on the last ice when the Siberian roach comes out of the holes.
Where to catch chebak and at what time?
On reservoirs with a large area, it has been noticed that a good bite can be found in the evening. If luck is on your side, then you will be guaranteed a couple of kilograms of silver beauty in 1-2 hours. Sunny days can lead to catching this fish throughout the day. What is causing this fishing frenzy? – a little more and the time for spawning will come, the chebak needs to gain strength and gain fat. Reservoirs with quiet water often present “surprises” in the water column.
Despite the fact that in the Chelyabinsk region there is chebak on almost every body of water, the Kasli lakes are generally considered to be the most popular winter reservoirs for chebak: Bolshie Kasli, Lake Irtyash, Lake Sungul. Argazinskoye and Shershnevskoye reservoirs, lakes Terenkul, Uelgi, Ulagach (Kunashaksky district), Atkul (Etkulsky district), Second (Krasnoarmeysky district).
Necessary gear for catching chebak.
You will need a jig or a rolling - bottom tackle. In the recent past, the float was widely used, but now it is rarely seen on ice. They began to forget it, because fishing in a constant “standby mode” attracts few people. But it is necessary to consider such gear, because probably future fishermen who are unfamiliar with it are now reading this article in front of computer monitors. The winter float is similar to the summer version; the only difference between them is the float. In summer it looks out of the water, but in winter, on the contrary, it is “hidden” in the water column by 1-2 cm (so as not to be covered with ice). The weight lies completely on the bottom; the use of leashes is optional.
More details about the jig
Chebak is a fish that does not welcome active play with a jig. She is more impressed by the slow, smooth rise and fall of the jig, as well as hitting the bottom. In practice, there are cases when a fish “takes” the bait when it is simply hanging in the water column. The shape of the jig is as follows: droplet, diamond, pellet (basic). Speaking about the fishing line, it must be said that a high-quality fishing line 0.08-0.1 mm in diameter will be sufficient. The most effective jigs are those made in copper color.
Ride
This gear is classified as passive and is used on rivers and reservoirs with currents. Pokatok is a bottom tackle consisting of a sinker, a nod, a fishing line and the rod itself. Since chebak is caught by rolling in the current, the sinker must be heavy. It is very important to find the golden mean: choose a load so that the tackle remains just as delicate and sensitive, but also does not succumb to the current. The line should be knitted thicker than 0.12-014 mm, on the leash the line should be 0.1-0.12 mm.
Which jig to choose?
Attachment
A regular nail ball works well for a jig attachment.
The simplest manufacturing option:
- A round lead fishing sinker of the required weight and diameter is selected, cut to half.
- The cut is treated with flux, and a tinned fish hook is inserted into it.
- The cut is sealed with tin solder.
- The nail ball is processed with a file and sandpaper.
- If necessary, the jig is painted. White, yellow, light gray colors are suitable for roach.
Mothless
The most effective and interesting fishing for chebak in winter is fishing with a reelless jig.
The chebak in open water even throws on spinner bait No. 0 and No. 1, i.e. Siberian roach is more attracted to dynamic baits. This means that in winter, fishing with a reelless jig with an optimally selected action will be the most effective fishing method.
Catchable reelers that should be present in a fisherman's box:
- devil;
- witch;
- ant;
- nymph;
- Uralochka;
- goat.
Making jigs
Homemade jigs, made taking into account all the nuances of winter fishing, are often much more catchy than store-bought ones. It happens that a new catching model has not even been manufactured industrially yet.
New model “crap”
A jig in the shape of a drop, cut in half, or half a seed, from the plane of which a hook emerges at an angle of 450 with a colored bead on the underside. Tests have shown its high catchability for roach.
Fish of different sizes bite on this jig.
Instructions:
- A melt of tin or lead is applied to a flat flat surface (for example, a glass cutting board) with a soldering iron. Depending on the volume of the melt, a drop is formed, 6-8 mm long - a suitable size. As it cools, one side of the drop becomes flat.
- In the cooled half-drop, on the flat part on the side of the sharp edge, an incision or cut is made to half the length of the jig, with a depth equal to two diameters of the hook wire. The channel is treated with flux.
- The hook is bent approximately in the middle of the fore-end with the fore-end toward the tip at an angle of 450. The hook is cleaned and tinned at the junction with the drop, inserted into the cut, and the junction is carefully sealed without haste.
- Irregularities are processed with a file to give the jig an ideal shape.
- The jig is painted black with nail polish.
- The bead is put on through the point and secured against falling out with a short, thin heat-shrinkable tube. The tube is put on, heated, tightly wraps around the hook wire and locks the bead in the right place.
Expert opinion
Knipovich Nikolai Mikhailovich
Zoologist, hydrobiologist. I am interested in fishing at a professional level.
Important! It is best to solder slowly, gradually dripping molten tin into the channel and waiting for the workpiece to cool. Then the half-drop will not heat up and lose its shape.
Expert opinion
Knipovich Nikolai Mikhailovich
Zoologist, hydrobiologist. I am interested in fishing at a professional level.
Important! Tests have shown that roaches readily respond to blue or dark green beads.
More detailed instructions for making crap in several ways.
"Witch"
The Witch is a dynamic cone-shaped jig with freely rotating hooks in the upper part of the body. When moving, it waves its hooks, reminiscent of an insect moving its legs. Large specimens of roach are more likely to peck at the witch.
Instructions:
- Take any solid cone-shaped object of a suitable configuration. Several layers of foil are wrapped around the cone and the foil is smoothed out. Excess foil is trimmed evenly with a paper and cardboard knife.
- The cone with foil is inserted evenly into a container with sand, the solid cone is removed, ferrous wire is placed vertically into the cone, molten tin or lead is poured into the foil, not reaching the edges of the cone by a hair.
- A needle of suitable thickness is placed on top of the foil cone, lubricated with paraffin or silicone ointment for easy removal from the body of the jig after the melt has cooled. (On the witch you can attach 2 or 4 hooks symmetrically. For two hooks you need one needle, for four - two needles, arranged crosswise).
- Another portion of molten tin or lead is added until a mound is formed. After the workpiece has cooled, the needles are removed.
- The body of the jig is processed with a file to give it an ideal conical shape.
- The wire above the dome of the jig is twisted to form a loop, or wound around a nail to create a winding ring.
- Ferrous wires are inserted into the resulting holes from the needles. At both ends of the wire, winding rings are screwed onto a nail of suitable diameter.
- Hooks with beads are put on the rings.
- Sometimes the witch's body is painted in whole or in part, but for roaches this is not necessary.
Ant
A light ant-type jig is made very simply: beads are put on a hook with a long shank in turn: a large one, a smaller one, the smallest one. The beads are pressed with cambric.
Instructions for making a heavy ant:
- The shank of the hook is cleaned with a file and tinned.
- A hook is inserted into a large sinker, cut to half (the cut is treated with flux), right at the eye, and the cut is sealed with tin solder.
- Do the same with medium and small lead balls.
- After cooling, a colored heat-shrink tube is placed on the balls and heated, tightly encircling all three balls.
PHOTO 3
Expert opinion
Knipovich Nikolai Mikhailovich
Zoologist, hydrobiologist. I am interested in fishing at a professional level.
Important! If the length of the forend is not enough to accommodate three balls, the forend is extended with ferrous wire of a suitable diameter - the eye of the hook is bitten off, the ends of the hook and the wire are stripped, tinned, overlapped, and soldered. At the end of the process, a loop is made at the end of the wire or a winding ring is screwed on.
Two words about complementary feeding
Throwing complementary food into a hole in the middle of nowhere means counting on chance. The chebak is inactive during this period; most of the time the flock is in one place. Sprinkling food in the hope of luring fish from afar is useless.
It is too presumptuous to expect that complementary food will fall right under the nose of the flock.
In January and until about mid-February, one thing we can advise is to actively search for a promising hole .
If a chebak bite happens in any hole, you need to put the bait there in small portions in order to collect the lazy fish in one place near the hook.
The rest of the winter, it is worth putting small portions of complementary food into the hole in promising places.
If the hole is working, it is worth constantly adding complementary food in small portions so that the flock does not lose interest in the hole.
Composition of winter complementary food : 30% animal protein + 70% plant food.
You should always remember that fish should be attracted by complementary foods, and not by feeding.
Time to catch chebak in winter
In winter, it is very important to determine the conditions under which the chebak will actively bite, otherwise fishing will not take place, as anglers like to say.
The chebak begins to actively peck at the first appearance of ice on the pond. At the same time, it should be remembered that ice fishing is an unsafe activity. You should only go out on the ice when it is stronger. At the same time, the “hunt” for the chebak should not be postponed if there is a desire to catch it. The fact is that with the arrival of real cold weather, and this is the northern regions anyway, fishing becomes problematic. This happens in the dead of winter, with the arrival of January. During this period, the chebak loses its activity and its bites can be very rare.
This period does not last long and already at the beginning of February the chebak begins to come to life again. You can safely go fishing, because the ice becomes very strong and thick, so it is almost impossible to fall through. At the same time, you will have to work hard when drilling holes, since the thickness of the ice can reach 1 cm, or even more. Still, safety precautions should always be observed. This period of active chebak fishing continues until the ice melts.
Chebak is most active early in the morning and until lunchtime, when he goes to “rest.” Towards evening, the activity of this fish is restored again and continues until sunset. As soon as it gets dark, you can safely pack up your gear and go home. Nobody practices night fishing for chebak, since this is impossible due to its disregard for bait.
Almost all types of fish have a significant dependence on weather conditions and chebak is no exception. It has been noticed that in cloudy weather conditions, the chebak bite decreases sharply. He continues to take bait, but, as they say, without much enthusiasm. In clear sunny weather, its bite is simply amazing, which brings a lot of pleasure to anglers.
Game, bite, fishing
Chebak loves mid-frequency play with a smooth rise of the jig to the surface of the water, then a smooth lowering with oscillations of the same frequency. This is the start of the game.
Each body of water has its own games. You have to select the style of play - change the frequency, the speed of lowering, the time of short pauses, etc., until you find the optimal, “your own game.”
The bites of Siberian roach are gentle and careful. There is no point in delaying cutting. A short, sharp, but smooth hook is optimal.
You need to pull the fish out of the hole quickly, but smoothly, without jerking. The fish actively resists when fished; it can fall off the hook if you hesitate or tear its lip if you fish it too hard.
Common mistakes
- Throwing complementary food into the wilderness in an unknown place.
- Feed the fish with complementary foods.
- If there is no bite, change holes frequently without testing different playing styles.
- Limiting yourself to one hole is a waste of time.
- It is useless to expect that in winter the fish will look for your jig on its own. The working hole should be actively sought by the fisherman himself.
- Limit the set of jigs. You can guess the model and color while fishing in the morning, but in the evening the chebak won’t like it.
- Sharp or, on the contrary, slow fishing - 99% of the chebak coming off the hook.