Choosing a feeder rod requires certain knowledge. If you are an experienced fisherman and are well versed in fishing with a float rod or donk, then to choose the right feeder rod you still need certain tips and recommendations. And if you are a complete beginner and are just learning all the intricacies of fishing, then our tips will be very useful for you.
I am almost sure that you, reading my article, are far from new to fishing. This will greatly facilitate the perception of the information that will be presented below on the website rybkolov.ru. And I’m sure that you didn’t go to the store to see a consultant because you understand that they can sell you not what really suits you, but what they need to sell. Unfortunately, this is how most fishing stores operate.
While looking through information on the Internet on choosing a feeder rod, I discovered this interesting thing - everywhere it is written about the different types of feeder rods by material, length, test, manufacturer... But it doesn’t really say which feeder to choose. As a result, an angler who wants to understand the choice of a feeder receives a bunch of new information, but is left alone with his problem, without understanding which rod is right for him. In this article, we focus specifically on the appropriate feeder for a novice angler, and not on their variety.
Of course, it won’t be possible to recommend any specific feeder, because everyone catches different fish in different conditions, but you can still select the main points that are almost universal. Let's look at the main criteria for choosing a feeder rod, depending on the fishing conditions. And at the end we will assemble a model of the ideal feeder rod for a beginner.
What length of feeder rod to choose
The length of the feeder rod can vary from 2.7 to 4.8 meters. For the first feeder rod, it is optimal to choose a rod with a length of 3.3-3.6 m. But when choosing a feeder rod by length, you should focus on the casting distance that you will need. If you are going to fish on a small lake, pond or river, then you can safely choose a shorter rod - it will be easier for you to control and the banks abundantly overgrown with vegetation will not become a particular obstacle. If fishing will take place on a large river or reservoir with a width of more than 100-150 meters, then you will need a rod of 3.6 meters or more. Don’t forget that it’s much more pleasant to fish with a shorter and thinner rod. If you plan to catch crucian carp with a maximum weight of up to 0.5 kg, then it will be much more pleasant to fish it with more delicate tackle. In addition, when catching small fish, a rough stick absorbs much worse, which will lead to frequent fish escapes. If you plan to catch fish weighing more than 0.5 kg, and this is usually carp, silver carp and grass carp, then a rod 3.6 meters long will be most suitable. As mentioned above, a rod with a length of about 3.3-3.6 meters is the most versatile. Such a feeder will allow you to comfortably fish both in small and large bodies of water; it will cope with both large and small fish. Therefore, if you are in doubt when choosing the length of the rod, feel free to take a feeder with a length of 3.6 meters.
Types of feeder rods
Plug
Consist of two or more elbows, twisted through threads. They can have a length from 2 to 5 meters. Allows you to make long casts and adjust the size of the blank depending on the area of the reservoir. They are used by professional fishermen and amateurs.
Advantages:
- variety of models in length;
- suitable for use in standing water and strong currents;
- wide price range;
- forms with a minimum number of elbows are very durable;
- support work with feeders from 20 to 200 g.
Flaws:
- some products are inconvenient to transport;
- Some models can be very expensive (depending on the manufacturer and case material).
Telescopic
They are compact in size and quick to set up. They consist of six elbows of different diameters that fit into one another. They allow you to travel with your gear on a bus, car or train without taking up much space. Suitable for feeder fishing enthusiasts who have to get to the reservoir by public transport.
Advantages:
- easy to use;
- quickly unfold;
- convenient to transport;
- equipped with a cover;
- dough support 10-60 g;
- replaceable tops.
Flaws:
- length up to 2.1 m;
- strength will allow you to lift only fish up to 2-3 kg.
Which feeder test to choose
The rod blank test implies the load for which it is designed, namely what weight the feeder will be used. If you use a feeder that is lighter than the test specified on the feeder form, then you will significantly lose the sensitivity of the feeder, and if the weight is higher than the upper limit of the test, then you risk breaking the rod. According to the test, feeder rods are divided into: • Ultralight (Ultralight) - up to 40 g; • Light (Light) - up to 80 g; • Average (Medium) – 80-100 g; • Heavy (Heavy) - 100-120 g; • Extra heavy (Extraheavy) - 120 g or more. The higher the rod test, the heavier the feeder can be used. Accordingly, the further you can throw the bait. Also, when choosing a fishing rod test, you should take into account the body of water, or rather the strength of the current in it. When fishing in a current, you need to choose a feeder with a weight that will not be carried away by the current, so when choosing a feeder test, focus on the speed of the current and casting distance. It is worth considering that if the bite is bad, it is better to use feeders as light as possible. Often in cold water, when the fish are very cautious, you have to fish with feeders weighing 20-30 grams. But you won’t be able to throw such a feeder with a rod with more than 60 grams of dough. Light feeders require a lighter feeder. If you haven’t fully decided which test to choose for a feeder, pay attention to the most universal option - a middle-class rod with a top test of up to 90-100 grams. This test will be optimal for a novice angler and is suitable for most fishing conditions. And then, based on your practice, you will be able to understand which test of the next feeder is best for you.
Feeder rod selection parameters
Test and class
These concepts are interrelated because they are formed on one parameter - the weight of the bait. Unlike spinning rods, the feeder uses a feeder with different fillings. It is made in the form of a small cage, so its weight is greater than the mass of the spoon.
The following classes are distinguished:
1. Picker - supports work with bait from 10 to 40 grams. Such models are equipped only with a sinker, and the mixture is thrown into the water by hand. This is the best option for fishing on a small lake. A bit like bottom fishing with a fishing rod, but without a float.
2. Light - already has a standard feeder for loading bait, which can weigh up to 60 g. It is used on spacious lakes, since it can be thrown 30-40 m.
3. Medium - the weight of the cage with food can vary from 80 to 100 g. It is one of the most common types of gear, since it is suitable for fishing both in still water and during currents. Throws 40-50 meters.
4. Heavy - supports work with a total bait weight of 100-120 g. Such models are used on wide rivers with strong currents. With their help, it is easy to control fishing and increases the chances of catching large grass carp.
5. Exta heavy - all rods with a test weight over 120 g. The maximum value can reach 300 g. The blank allows you to cast the bait very far, which is convenient on huge canals and artificial reservoirs. Used by professionals on reservoirs with complex bottom topography.
Form material
The rods themselves are made from various substances.
1. The most affordable forms are made from fiberglass, which have a relatively low weight. This is a good option for a beginner or fishing a couple of times a year. The composite is stiffer and heavier, but it is more difficult to break, which is useful for hobbies on reservoirs where large roaches are found.
2. The most expensive and durable blanks are carbon fiber. Light weight and high strength make them real leaders in casting range and flexibility when fishing for large carp or bream. This model is worth buying for regular or professional fishing.
Blank weight
The weight of a fishing rod depends on its size, material and number of joints.
1. The lightest ones can be 120-200 g. In the case of amateur fishing or frequent fishing in small bodies of water, where you cannot catch a large specimen, it will not be convenient to handle half a kilogram of equipment.
2. The maximum reaches 420-500 g. They are designed to withstand heavy loads and fish for large fish. If this is the purpose of fishing, and other parameters correspond to this, then a heavy model will come in handy.
Construction type
The more joints there are on a rod, the less durable it is. But since the mass of feeders and bait used is large, a large length is required to cast. The form is formed from elbows attached to a thread. There may be two, three or four.
1. To catch large fish (carp, roach, cupid), you need products made of two or three parts.
2. Carp and tench can also be caught using a four-legged blank.
3. White bream and other small fish are caught using telescopic devices.
Length
An important criterion is the length of the rod, which affects the casting distance and technical capabilities when fishing.
1. Forms measuring 2-3 meters are used at small stakes, where fishing is carried out relatively close to the shore.
2. From 3 to 3.6 m are used on lakes or rivers with small currents.
3. Rods 3.6-3.9 m are the most common and are suitable for wide lakes and rivers with strong currents. Thanks to their length, they make it easy to cast long distances and drag the fish over the edge near the shore to avoid getting lost.
4. Models from 4 to 5 m are designed for large bodies of water and especially large fish, to ensure the correct fishing conditions and to avoid getting caught.
Build
This type of fishing tackle has three types of action:
1. Fast - involves bending one knee from the tip. The small amplitude allows for short casts and ensures the transfer of small prey across the edge. This product is good for a beginner to practice on.
2. Slow action gradually uses the entire length of the rod, which gives high elasticity. When a large carp jerks, the blank bends, which prevents the line from breaking. The high flexibility of the feeder allows the use of heavier baits and longer casts, which is convenient on wide lakes.
3. Complex - fully corresponds to its name, since under light loads (the fish rushes around with a zigzag trajectory) only the tip of the rod bends. But if more active movement begins (attempts to go into snags, diving to depth), then the entire structure comes into play. Of course, such characteristics are useful for large tests and large production.
Number of tips
The main feature of the feeder is its bendable tip, which allows you to register a bite. But the sensitivity of the latter may vary, depending on the mass and type of fish. Therefore, some manufacturers began to produce fishing rods with a replaceable tip.
1. If the fishing location and the weight of the fish being claimed are the same, then you can buy a feeder with a glued tip and use only that.
2. If you have to frequently change the reservoir and the weight of the catch can change significantly (from small white bream to large carp), then it is practical to buy a rod with interchangeable tips and rearrange them depending on the situation.
Shipping length
Depending on the fishing location, the length of the disassembled form is also selected.
1. If you have to fish close to your home (stacking or a river in the country), or you have your own transport, then you can choose models of 150-190 cm or more.
2. For transportation on a bus, more compact feeders of 120 cm when folded are useful. To do this, it must have 3-4 elbows or be telescopic.
Feeder material - which is better?
Their price directly depends on the material of the feeder rod. Here you must make a choice based on your financial capabilities. Let's look at each material and find out their features. 1. Graphite is the most expensive material for making a feeder. It has many advantages, the main one being its weight. The high-modulus graphite feeder is really very light and fishing with it is very comfortable. Such rods can withstand enormous loads when playing fish, but are very sensitive to mechanical damage, such as impacts on the sides of the boat, stones and other hard objects. Such rods must be handled very carefully and ensure that there is no sand or small pebbles at the junction of the knees, otherwise the rod will wear out very quickly. For beginners - not the best choice. 2. Composite. Feeder rods made of composite are much cheaper than graphite rods, but already have more weight. They no longer require such careful treatment and forgive many handling errors. So for a beginner, such a rod is quite suitable, and it will cost less. 3. Fiberglass. The cheapest feeders are made from fiberglass. This is the most durable material of all of the above. But such rods are quite heavy and rigid, which will cause some inconvenience during the fishing process. For beginners who just want to try feeder fishing, this is what you need.
Rod build
The action or flexibility of a fishing rod is the ability to bend under load. The action of the rod is divided into three types: fast, medium and slow.
In a fast action rod, only the upper part bends, while a slow action rod bends along the entire length:
- Slow action – the rod bends along its entire length to the handle. Designed for catching small fish in small reservoirs and rivers. The maximum casting distance is about 30 meters. Allows the use of thin fishing lines and “invisible” equipment, smoothes out fish jerks.
- Medium action (averase) – the rod bends to the middle from the top. Has average characteristics. Definitely suitable for beginner anglers. Allows you to make casts up to 50 meters. They perform well in the middle reaches.
- Fast action is a strong rod in which only the tip bends. With this rod you can cast to a point with a diameter of about 3 meters. They can be used to quickly catch fish. However, there are small disadvantages: the rod, sometimes, is not able to absorb the jerk of a large caught fish, which leads to the breakage of the leash.
If you are new to fishing with a feeder, then you should first choose a fast action rod. With such a rod you will not be afraid of breakage and will be able to make long casts.
Which coil to choose for the feeder
One of the important components of a feeder rod is the reel. The best option would be a spinning reel size 4000 according to the Shimano classification (3500 according to the Daiwa classification). Choose more traction reels, that is, with a lower gear ratio, because when fishing with a feeder, rather heavy feeders are used. For this type of fishing, reels with a rear drag without a baitrunner are more convenient. The reels described above are perfect for light, medium and heavy class rods. That is, they are suitable for all classes of feeder rods, with the exception of the most extreme ones - Ultra light and Extra Heavy. But beginners, as a rule, are not interested in these classes.
Which feeder is better - telescopic or plug-in?
There are two main types of feeder rods – telescopic feeder rods and plug-in rods. The first ones are usually purchased by beginners. Experienced fishermen, who have had a lot of practice, choose plug-in rods: a plug-in feeder is much more convenient for casting, as well as the ability to install rings in convenient places, which is not possible when using a telescopic feeder. At the same time, a feeder telescope is more convenient to transport and much cheaper than a “plug”.
A budget “telescope” does not mean low-quality
Among budget telescopic feeders, rods and “Trimm” stand out. Volzhanka telescopic feeders are made of durable high-modulus fiberglass. On average, the optimal weight of a feeder varies from fifty to sixty grams, and the casting range is about fifty meters. This is a fast action rod that has quite a few disadvantages. These include too small rings on the tips, far from the standard sizes. In addition, there are also the standard “diseases” of all telescopic feeders - a thick handle and a hum when biting. But all this is more than compensated for by the very, very budget price. Trimm rods are often made from a high-tech composite. The casting is much further compared to the rods of the previous company - on average about seventy meters with the same weight of the feeder. The disadvantages are also common “illnesses”, which are also more than compensated for by the low cost.
Thus, it becomes obvious that with the correct selection of parameters and following the recommendations outlined in this article, it is quite possible to purchase a decent telescopic feeder rod at a very budget price. Of course, a plug rod is more suitable for professional or sport fishing - but why overpay in vain if your main goal is simply to enjoy the fishing process itself? Be careful when choosing your first feeder - and you will be provided with complete rest from the hustle and bustle.
How to choose a feeder rod for beginners
Choosing the optimal feeder length
The feeder length usually varies from 2.7 to 4.8 m.
For novice fishermen, a feeder with a length of 3.3-3.6 meters is better. However, when choosing the length of the feeder, you need to take into account the casting distance that suits you. If fishing will take place in a small reservoir, it is better to choose a shorter feeder, which is easier to manage and will not get tangled in the lush coastal growth.
When fishing on a large reservoir with a width of more than 100-150 m, a feeder with a length of 3.6 m is useful.
You should also remember that the shorter and thinner the feeder, the more pleasure you will get from the fishing process itself.
For example, if you are fishing for crucian carp weighing no more than 500g, the sophistication of the feeder is of great importance.
In addition, a thick and long rod exhibits poor shock absorption when hunting small fish, and this will cause frequent catch failures.
If the purpose of fishing is individuals weighing more than 500g, for example, carp or silver carp, then a feeder 3.6 m in length will be the most optimal.
Let us repeat that a feeder with a length of 3.3-3.6 m is the most suitable option. It makes it possible to successfully fish in reservoirs of any size and catch both large and small fish. Therefore, if in doubt, don’t hesitate to buy a 3.6m long rod and you won’t go wrong.
Choosing a suitable feeder rod test
The rod blank test assumes the pressure for which it is intended, in particular, what the mass of the feeder will be. If the weight of the feeder is less than the test weight indicated on the rod blank, the sensitivity of the feeder will decrease significantly; in the opposite situation, there is a possibility of damage to the feeder.
Depending on the test, feeders are divided into:
- ultra-light – less than 40 grams;
- light – less than 80 grams;
- medium - from 80 to 100 grams;
- heavy - from 100 to 120 grams;
- super heavy - more than 120 grams.
The higher the feeder test, the more massive the feeder can be used and the further the bait can be thrown. In addition, the choice of feeder test is influenced by the type of reservoir, in particular, the power of its flow.
When fishing with a strong current, it is necessary to choose a feeder with such a mass that it can withstand the current; therefore, when buying a test rod, consider the strength of the current and the casting distance.
It must be remembered that when fishing is inactive, a lighter feeder can contribute to the bite. Often in icy water, when the fish are wary, fishermen are forced to fish with feeders weighing 20-30g. It will not be possible to cast such a feeder with a feeder with more than 60g of dough, so for lightweight feeders you will also need a lightweight rod.
If you still have doubts about choosing a feeder test, take a closer look at the most optimal model - a medium-class feeder with a top test of less than 90-100g. This test is most suitable for a beginner and will be appropriate for any fishing conditions. In the future, as you gain experience, you yourself will determine which rod test is the most optimal for you.
Recommendations for choosing material for a feeder rod
The cost of the feeder is largely determined by the material from which it is made. You should consider your budget when purchasing. Let's look at the most common feeder materials and their characteristics.
- Graphite is the most expensive material for fishing rods and has a lot of advantages, the main one being its weight. A rod made of high-quality graphite is unusually light and convenient for fishing; it can withstand significant pressure when fishing, but is highly susceptible to various damage, such as impacts on the sides of the boat, stones and other strong objects. You should fish with such feeders very carefully and make sure that sand and small stones do not get into the area where the knees meet, otherwise the feeder will quickly become unusable. These feeders are not suitable for beginner fishermen.
- Composite . Composite feeders, compared to graphite feeders, have a lower cost, but greater weight. They do not require careful use and can withstand a variety of fisherman's mistakes. For beginner fishermen - the best option, and also inexpensive.
- Fiberglass . Budget fishing rods are made from fiberglass. This is the most reliable material of all those considered. The disadvantage is the heavy weight and significant rigidity, which causes discomfort during fishing. These feeders are suitable for beginner fishermen who want to try this kind of fishing for the first time.
Types of feeders by structure:
- ultra-fast;
- fast;
- average;
- slow.
For beginner fishermen, a medium action feeder is best suited because it has standard performance and is good for a beginner.
The form of such a feeder bends to the central part, which makes it possible to absorb the throws of large prey and at the same time, conveniently cast.
Which brand of feeder rod should you prefer?
With modest financial resources, it is unreasonable to spend all your money on a fancy feeder from a popular brand. The best option is to purchase a middle-class fishing rod made in China and make your first attempts at fishing. Here is a list of manufacturers that have proven themselves:
- Salmo
- Shimano
- Mikado
- Sabaneev
- Volzhanka
Choosing a reel for a feeder rod
The coil is one of the main parts of the feeder. The best model for a beginner is a 4000 size spinning reel using the Shimano system.
You should choose the most traction options (with a small gear ratio), since massive feeders are used in feeder fishing.
For this kind of fishing, reels with a rear drag without a baitrunner are suitable.
The above reels will perfectly complement light, medium and heavy feeders. Therefore, they can be used with all categories of feeders, except for extreme options. These categories are not suitable for novice fishermen.
Results
We examined all the features of feeders and revealed all the secrets of their choice. Now you need to combine the information received and identify a sample feeder that is ideal for a beginner:
- length – 3.6 m;
- test – from 60 to 100g;
- material – composite;
- build – medium;
- reel – 4000 according to Shimano.
Such a rod will be an excellent option for a beginner for 2 years or more. Although it is likely that the fisherman will like it so much that he will not part with it for a longer time.
How to choose a feeder rod and reel for beginners
04/06/2017 by Evgeny Timonin in the section Tips for fishermen Number of people who read the article: 33,463
Choosing a feeder rod requires certain knowledge.
If you are an experienced fisherman and are well versed in fishing with a float rod or donk, then to choose the right feeder rod you still need certain tips and recommendations. And if you are a complete beginner and are just learning all the intricacies of fishing, then our tips will be very useful for you.
I am almost sure that you, reading my article, are far from new to fishing. This will greatly facilitate the perception of the information that will be presented below on the website rybkolov.ru.
And I’m sure that you didn’t go to the store to see a consultant because you understand that they can sell you not what really suits you, but what they need to sell.
Unfortunately, this is how most fishing stores operate.
While looking through information on the Internet on choosing a feeder rod, I discovered this interesting thing - everywhere it is written about the different types of feeder rods by material, length, test, manufacturer... But it doesn’t really say which feeder to choose.
As a result, an angler who wants to understand the choice of a feeder receives a bunch of new information, but is left alone with his problem, without understanding which rod is right for him.
In this article, we focus specifically on the appropriate feeder for a novice angler, and not on their variety.
Of course, it won’t be possible to recommend any specific feeder, because everyone catches different fish in different conditions, but you can still select the main points that are almost universal. Let's look at the main criteria for choosing a feeder rod, depending on the fishing conditions. And at the end we will assemble a model of the ideal feeder rod for a beginner.
What length of feeder rod to choose
The length of the feeder rod can vary from 2.7 to 4.8 meters. From a minimum feeder length of 2.7 meters to 4.8 meters, the lengths are distributed in increments of 0.3 meters. For the first feeder rod, it is optimal to choose a rod with a length of 3.3-3.6 m.
But when choosing a feeder rod by length, you should focus on the casting distance that you will need. If you are going to fish on a small lake, pond or river, then you can safely choose a shorter rod, it will be easier for you to control and, moreover, the banks abundantly overgrown with vegetation will not become a particular obstacle.
If fishing will take place on a large river or reservoir with a width of more than 100-150 meters, then you will need a rod of 3.6 meters or more.
Don’t forget that it’s much more pleasant to fish with a shorter, thinner rod than with a thick, hard stick.
Therefore, if you plan to catch crucian carp with a maximum weight of up to 0.5 kg, then it will be much more pleasant to fish it with more delicate tackle.
In addition, when catching small fish, a rough stick absorbs much worse, which will lead to frequent fish escapes.
If you plan to catch fish weighing more than 0.5 kg, and this is usually carp, silver carp and grass carp, then a rod 3.6 meters long will be most suitable.
As mentioned above, a rod with a length of about 3.3-3.6 meters is the most versatile. Such a feeder will allow you to comfortably fish both in small and large bodies of water; it will cope with both large and not very large fish. Therefore, if you are in doubt when choosing the length of the rod, feel free to take a feeder with a length of 3.6 meters.
Which feeder test to choose
The rod blank test implies the load for which it is designed, namely, what weight the feeder will be used. At the same time, if you use a feeder that is lighter than the test specified on the feeder form, then you will significantly lose the sensitivity of the feeder, and if the weight is higher than the upper limit of the test, then you risk breaking the rod.
According to the test, feeder rods are divided into:
- Picker (aka ultralight) - up to 30 g ;
- Light feeder - up to 60 g ;
- Medium feeder - 60-100 g ;
- Heavy feeder - 100-120 g ;
- Extra Heavy feeder - 120 g or more .
The higher the rod test, the heavier the feeder can be used. Accordingly, the further you can throw the bait.
Also, when choosing a test rod, you should take into account the body of water, or rather the strength of the current in it.
When fishing in the current, you need to choose a feeder with a weight that will not be carried away by the current, so when choosing a feeder test, focus on the speed of the current and casting distance.
It is worth considering that if the bite is bad, it is better to use feeders as light as possible. Often, in cold water, when the fish are very cautious, you have to fish with feeders weighing 20-30 grams, no more. But you won’t be able to throw such a feeder with a rod with more than 60 grams of dough. Light feeders require a lighter feeder.
If you haven’t fully decided which dough feeder to choose, it’s better to take the most universal option - Medium with a top dough of up to 90-100 grams.
This test will be optimal for a novice angler and is suitable for most fishing conditions.
And then, based on your practice, you will be able to understand which test of the next feeder is best for you.
Feeder material - which is better?
The material from which feeder rods are made directly determines their price. Therefore, here you must make a choice based on your financial capabilities. Let's look at each material and find out their features.
- Graphite. The most expensive material for making a feeder. It has many advantages, the main thing worth noting is its weight. The high-modulus graphite feeder is really very light and fishing with it is very comfortable. Such rods can withstand enormous loads when playing fish, but are very sensitive to mechanical damage, such as impacts on the sides of the boat, stones and other hard objects. Such rods must be handled very carefully and ensure that there is no sand or small pebbles at the junction of the knees, otherwise the rod will wear out very quickly. For beginners - not the best choice.
- Composite Feeder rods made of composite are much cheaper than graphite rods, but already have more weight. They no longer require such careful treatment and forgive many handling errors. So for a beginner, such a rod is quite suitable, and it will cost less.
- Fiberglass. The cheapest feeders are made from fiberglass. This is the most durable material out of all of the above. But such rods are quite heavy and rigid, which, of course, will cause some inconvenience during the fishing process. For beginners who just want to try feeder fishing, this is what you need.
Feeder rod structure
According to their structure, feeder rods are divided into:
- fast;
- average;
- slow.
For a beginner, the best option would be a medium-action feeder rod, because it has average characteristics and is ideal for an inexperienced feeder. The blank of such a rod bends to the middle, which allows you to soften the jerks of large fish and, at the same time, not experience discomfort when casting.
Which brand of feeder to choose
If your fishing budget is limited, don’t rush to spend all your money on a “cool” fishing rod from a famous brand. You can try to find a relatively good Chinese-made feeder and practice on it.
It’s like when you buy a car when you just passed your license - yes, you can immediately buy a Mercedes of the latest year of production, or you can buy a Zhiguli - and you’ll get practice, and it won’t be so offensive if the car falls into disrepair.
Below I will list manufacturers that you can trust and that make really good and reliable gear:
- Salmo;
- Shimano;
- Mikado;
- Sabaneev;
- Volzhanka.
Which coil to choose for the feeder
One of the important components of a feeder rod is the reel. Here I definitely advise you to take a reel size 4000 according to the Shimano classification (3500 according to the Daiwa classification). Choose more traction reels, that is, with a lower gear ratio, because when fishing with a feeder, rather heavy feeders are used.
The reels that I described above are perfect for Light, Medium and Heavy class rods. That is, they are suitable for all classes of feeder rods, with the exception of the most extreme ones - Ultra light and Extra Heavy. But these classes are not interesting for beginners.
Bottom line
So, we have analyzed feeder rods according to all their characteristics and now we know exactly which one is better to choose.
Now, you need to collect all the new information and get a specific example of a feeder that is perfect for a novice feeder.
