Jigs for bream for fishing in winter: what to fish for, how to catch correctly and how to make your own tackle, also photos of the best options and jigs

In winter ice fishing for bream, you can’t do without an arsenal of jigs. This smart and cunning predator reacts quickly to such tackle and readily bites. Some amateurs believe that constantly choosing which jig from the prepared set is the best today and often changing them, you can get pretty tired. This is wrong. If the frost is mild and everything is thought out in advance, then changing jigs on a fishing rod is not so difficult.

The main thing for any angler is to catch the desired trophy and please yourself and your family with a good catch.

Technique

It is better to start winter bream fishing by studying the topography of the bottom of the reservoir. Even if you have an echo sounder, it is better to drill not one, but several holes at a distance of 5-10 m from each other. Depth differences can be determined by lowering a depth gauge into each hole, or using an echo sounder, which allows you to see a more detailed picture of the bottom. For catching bream, depth differences of 3-4 meters are optimal.
After the most promising places for fishing have been identified, bait can begin. You need to pour a portion of complementary food into each hole, after which it is better to darken the hole. You should start fishing from the first hole and no earlier than half an hour later.
To successfully catch bream, you need to know its habits and follow fishing techniques. The jig should sink to the bottom and rise with smooth movements. To stimulate the bite, it is recommended to alternate the rise and fall of the jig with tapping and light stirring on the bottom.
When you feel a bream bite, you need to immediately make a sharp movement and start slowly fishing. If the fish makes a sharp jerk, it is better to give in to it a little and lower the fishing line, then take it back with slow movements. To pull a large bream out of a hole, it is better to use a hook.

Equipment and equipment

A very important thing is an ice screw. You should take care of a fairly large drill with a diameter of at least 150, and it is better to take 200. The fact is that the wide body of a bream simply will not fit into a narrow hole, so it makes no sense to use a “sports” drill with a diameter of 100 or even 80. Fortunately, you won’t have to drill 100 holes in one fishing trip, and you won’t need a lot of effort to drill wide holes.

You will definitely need either a box or a comfortable seat. You will have to fish for quite a long time from one hole. If you fish from your knees, from a seat, or from some other light sports equipment, your legs will quickly get tired, and it is better to take care of comfort in advance.

You will also need heating pads. Warmers are placed on the arms and legs in severe frost; catalytic heating pads are usually used. Sometimes a burner is placed near which you can warm your hands. A stove with an exhaust hood is simply installed in the tent. Speaking of a tent, it is highly desirable to have one, even if it’s a small one.

Usually they go fishing for bream not for one day, but for a couple, sometimes even for a week. Often anglers, having found a good place and decided on the bite, even change and fish from the same holes in shifts. To transport all the supplies across the ice comfortably, you will need a sled or sled, or at least a sheet of plywood so that you can transport all the supplies comfortably.

How to choose bait for bream

Spring bait

To fish in reservoirs with a current, it is necessary to add viscosity ; for this, clay from the reservoir and pea flour are used. Fraction : small, but always with the addition of large pieces of live maggots and food bloodworms. Color : light Smell : coriander is the best option Additives to attract large fish: instant corn, crushed peas, scalded maggot

Summer baits

In the summer heat, many complain about a complete lack of bite , but this is not always true. Properly selected bait can attract the attention of bream even in the heat. June: worm, maggot, corn, peas, pasta. July: steamed barley, maggot worms in the form of sandwiches. August: bread, pasta, corn, maggot worm. Temporary decreases in temperature indicators will entail a return of bream to animal types of bait ; vegetable bait should be offered in hot weather.

Autumn lures

In the autumn, bream continue to be actively caught on the feeder; groundbait and bait, as before, should work in tandem in such gear. As the temperature drops, bream will again want “meat” baits. September: earthworm and dung worm, maggot, hominy, bread, steamed cereals. October: bloodworms, worms, less often maggots. November: maggots and bloodworms, plant-based baits will not work. It is important to understand that the bait used in crushed form must be added to the bait.

Winter lures

In winter, bait for bream is very important; it is more difficult for passive fish to attract attention . Therefore, the selection of bait should be approached very carefully. December: sandwiches made from pieces of worms, bloodworms and maggots, less often boiled peas are used. January: bloodworm, worm. February: worm, bloodworm, semolina, peas. You can experiment and try using the dough as bait; at the end of February, bream can respond well to this species.

Winter fishing

In winter, for ice hunting for bream, it is better to use landmarks noticed during summer fishing.
Bream does not like fast currents . Therefore, the favorite habitats of this cautious fish are channel holes, ditches, ravines, bays of large rivers, at a depth of 7-12 meters.

When catching bream, you need to be as careful as possible and not create unnecessary careless movements. The vibrations of the jig should be smooth and unhurried. At the slightest suspicious shadow over the hole or a sharp movement of the jig, this cunning inhabitant of the reservoir will simply hide in cover and will not risk returning to its original place for a long time.

Jig for bream - what to attach?

Recently, I have radically changed my views on the selection of jigs. Being a fan of all kinds of baitless baits, where the shape, size, and color are of significant importance, I was convinced that when catching bream in the winter, the appearance of the jig under the bait is not so significant.

A distinctive feature of winter fishing on the reservoir is fishing in great depths. 6,8,10-12 meters is not the level where colors and intricate shapes will attract fish.

Features of fishing in February

How to catch bream? Fishing for bream in February is a challenging but interesting task. To catch this fish at the end of winter you will have to work hard. First of all, you need to determine the most likely habitats of bream in a given reservoir. The task becomes easier if you have already fished here in the summer, you just need to remember in which places the bream pecked most often .

The main thing in ice fishing for February bream is not to sit in one place with your fishing rod. If you are counting on a good catch, then you should look for fish by drilling a couple of dozen holes. You can also try experimenting with gear and different fishing methods.

Recommendations :

1. Having chosen the exact habitat of the fish according to the season, you need to carry out preliminary feeding.

2. It is better to cast over long distances in swimming craft.

3. Use jigs by color. They are different for 4 seasons.

4. Don't be afraid to run your game.

5. Take a large arsenal of gear with you.

6. Use fishing methods using catchable options.

It turns out that each jig has its own real opportunity to please the fishermen. Their principle is simple, but there are differences in color, shape and basic games on different bodies of water.

You can catch bream with this tackle if you have the slightest initial understanding of how to use it. Beginners can achieve results if they understand the essence of the gear. There is nothing complicated.

Understand and understand the principle of bream behavior under water in order to make it react to different types of jigs. Why, knowing all the subtleties and secrets, is it impossible to bring the long-awaited trophy home?

Incorrect assembly, inappropriate place and playing with mistakes, all this leads to downtime on the water. Review your gear, prepare properly, and ask experienced fishermen for advice.

If you want to catch bream, then don't buy a bunch of gear that doesn't work in your area.

Read our presentations several times, then you will really get an idea of real fishing, which is much more interesting in the wild than on paid reservoirs. The difference is huge, you can't argue with that.

We recommend that you read:

Also on this topic:

Bream and bream - what's the difference

Fishing for bream with a ring - equipment and fishing techniques

Read How to catch pike with a frog and choose the right gear

Catching bream in autumn: all the methods and tips

All gear for bream - for fishing from the shore and from a boat

Catching bream in November using a feeder, donka, fishing rod, the best tips from fishermen

How to plant bloodworms?

For active biting, your ability to correctly attach the bloodworm to the jig will be important. To do this, it is better to take a thin hook, the barb of which is not too sharp to prevent the fish or bait from being torn off. Experienced fishermen are proficient in several techniques for rigging live bait. Let's look briefly at each of them.

Standard method . The simplest and most common method is to place a bloodworm on the tip of the hook between the head and the rest of the worm's body. In this way, you can plant not just one, but a whole garland of bait. If the bite is not very active, it is better to disguise the tip of the hook.
Stocking . When baiting, the body of the mosquito larva is put on the hook of the jig with a stocking from the head, not reaching the end of the tail. Care should be taken not to puncture all the way through the fragile body of the worm. Experience shows that during the bite, the fish has no choice but to swallow the bait entirely at the place with the hook. The disadvantage of this baiting method is that it is designed for small-sized prey.
Bundle attachment . Used for catching large bream. To conveniently attach a whole bunch of bloodworms, you can use a small rubber ring, cut, for example, from a bicycle nipple. Several worms are pulled together with this elastic band and are easily placed on a hook of any size. A large predator willingly bites on such bait, which is easily replaced with a new bunch. The gum, after removing the fish, is usually preserved.
Sports . When you need to quickly bait the bait, as, for example, in sport fishing, you can use an unusual bait method. The worm needs to be inserted in the middle, but not pierced through, then the tip of the hook should be pushed inside the body towards the head or tail.

Fishing methods

Methods for winter fishing for bream with a jig:

Fishing with a fixed jig on a float or a nodding fishing rod.
For a game with baiting bloodworms (mormyshing).
Fishing without bait (reelless).
Use in current gear (garland, steam locomotive, descender, helicopter).

Let's take a closer look at these methods, the features of equipment for winter fishing rods, the baits themselves and aspects of their use.

What kind of rewinders are there?

A reelless jig is a jig that resembles the shape of an insect, which is part of the daily diet of fish. Such jigs are selected individually for each type of fish and do not require an additional bloodworm attachment.

The attachmentless jig is suspended on the fishing line at an angle of 45 degrees. To successfully catch bream using a reelless bait, you need to “play” with a jig, imitating the natural movements of an insect or worm.

Various fishing stores offer a variety of models of reelless jigs, but in order to choose the right jig for a specific prey, you need to understand the features of this gear.

Which jig is better to fish with? The most popular reelless jigs are:

Devil . A vertical jig with a triple hook, in which the line runs inside the body-column, or is tied to a ring soldered on top.
Uralka . Curved body, tapering towards a hook.
Goat . Similar to the “Uralka”, only with two hooks.
Ant . Two balls, a large and a small one, are soldered together, with a hook sticking out of the small one.
Cobra . A jig in the shape of the head of this snake, instead of a tongue there is a hook sting.
A drop . Drop-shaped winter jig.
Balda . A rewinder in the form of a conical body with hooks moving along the fishing line.
Witch . It looks like a bulldozer with movable hooks attached to the body.
Nymph . An elongated curved body with constrictions into segments.

Where and how to catch bream in winter

In many ways, the features of catching bream in winter depend on the choice of reservoir. Bream are successfully caught in winter both in still water and in the current.

Fishing for bream on a winter river

It is better to look for bream in rivers with a muddy bottom that reach at least 6 meters in depth; it is unlikely to encounter bream in shallow waters in winter;
Most often, wintering pits, near which bream gather, are located at the junction of fast and slow currents, or places with reverse flow;
bait begins 2-3 days before fishing, so that the bream is not afraid, sensing good living conditions;
equipment: both float and nodding fishing rods (the use of jigs is encouraged), feeder, donka.

Catching bream in winter on the current

the bait can be carried away by the current, so more massive feeder feeders are used;
in reservoirs with fast currents, bream can swim closer to the shore;
It is recommended to abandon float gear; the most profitable option is a winter donka (possible with feeder equipment); the fishing line must be strong (up to 0.15 mm in diameter), a jig is often used; A wire fishing rod is often used.

Features of catching bream on the lake in winter

It is difficult to detect a bream “site” on a lake, so it is better to drill holes at different depths, but as a rule, bream lives in deeper places; advantage - using an echo sounder;
groundbait: small bloodworms or composition (steamed wheat grits, breadcrumbs, fried crushed sunflower seeds, bran, flavorings can be added);
bream reacts better to a movable nozzle, so it is recommended to abandon the “stationary” loaded float; the rod should be light and comfortable, the jig will need to be small but heavy (unlike river fishing); The thickness of the fishing line depends on the biting frequency (approximately 0.12 mm).

When fishing from the bottom with a bait, there is one little trick that bream fishermen know. You need to choose a longer nod so that it counteracts the weight of the jig for as long as possible during its lifting.

When catching bream with a jig in winter, you can use one feature of the fish’s behavior. Bream are known to take bait from the bottom while in a vertical position upside down. Then he raises the bait higher, while the float lies down, and on a winter fishing rod, when a bream bites on the jig, the nod straightens.

In winter, this peculiarity of bream biting allows you to catch it with a nod, simply by placing a jig with bait on the bottom and adjusting the length of the fishing line so that the nod is curved. The rise of the nod indicates a bite. The hook follows, and powerful soft tugs of a weighty fish are felt on the line.

Make the bream bite - use a long nod

What to do if there is no bite on the bait lying on the bottom? Then a simple trick will help. You need to raise the jig by 0.5 - 1.0 meters and then simulate a slow sinking of the nozzle to the bottom. Those. very slowly and smoothly lower the nozzle back. The result of the action is a bite at the moment of touching the bottom or a little later.

When fishing from the bottom with a bait, there is one little trick that bream fishermen know. You need to choose a longer nod so that it counteracts the weight of the jig for as long as possible during its lifting.

A short nod, when biting, will immediately straighten out, and the bream, having picked up the bait, will quickly feel the weight of the jig. Most likely he will throw it, and hooking after straightening the nod will lead to nothing. A long, soft nod will help mislead the bream in this regard.

Apply bloodworms to bream

A universal winter bait is bloodworms. In winter, both roach and bream are caught with it. The relatively frequent bite of small fish corresponds exactly to such bait. One larva is hooked onto the thin and sharp hook of the jig. If there is no bite for a long time, then the leaked larva is replaced with a fresh one.

But what about bream, whose bites sometimes wait for hours at the well-fed holes? After all, the bloodworm will become unusable N number of times in such a time. And one moth on a hook is not the best bait for bream.

Need a bun. But changing constantly leaking bunches of bloodworms is not at all the best techniques for catching bream in winter.

To prevent the bunch of bloodworms from dying immediately, it is better not to put it on a hook, but to tie it to it. Then the whole bloodworm will not leak out, and for a long time it will be a natural sight to attract bream at the bottom and warm the angler’s heart with the hope of a favorable outcome. But how to do that?

How to tie a bunch of bloodworms when fishing for bream

But it’s easy to say - tie a bunch of bloodworms in the cold and hook it to the hook. But doing it in practice, without knowing some secrets, is practically impossible. There is a simple solution - to tie the bloodworms, use thin nipple rings. The modified half of a ballpoint pen also adapts.

Tips for fisherman: How to properly fish with a balance beam in winter - How to best use

Where the cap was screwed on, a part of the body is cut out longitudinally, so that it turns out to be something in the form of a spatula. The nipple is pulled onto the body of the handle. Place 5 - 7 bloodworms on a spatula. The nipple is pulled onto the bloodworm. And then it is removed from the handle along with it. Thus the bundle is ready. It is better to tie the required number of bundles at home in advance, rather than trying to do it in a hurry at the hole with stiff fingers.

Catching bream actively - game techniques

But waiting for a bream to bite on a stationary jig with bait is still not always the best solution. Sometimes you can freeze at the hole, but you won’t be able to wait for a bite. For those who don’t want to wait motionless, but prefer active fishing, here are a few bream fishing techniques. In addition, the use of baitless baits for catching bream is often more preferable during periods of activity of white fish - on the first and last ice.

When moving downwards, the bite of the bream can be so soft that it feels as if the jig is resting on something, while the nod slightly changes the angle of its bend. But any unnatural position of the nod when fishing for bream may indicate a bite. And you always need to hook immediately so as not to miss the fish.

It is also effective to occasionally gently move the jig with the attachment on the bottom using light nodding movements. Or just sometimes lift the jig with the bloodworm above the ground a couple of centimeters, with a little smooth play, and lower it back to the bottom

Every angler has his own secrets about this, because playing with a jig is an art. She is always individual. And the success of catching bream in winter with a jig depends on how much the angler feels the right rhythm, what experience he has and how his hand is positioned. You just have to take into account that with active fish the game should be faster and more challenging. And in the dead of winter, when the fish moves very slowly, you need to play as slowly and smoothly as possible.

Gear for catching bream in winter can be either float or nod. Both options have a common requirement - the ability to quickly wind up and unwind. This is necessary in order not to waste precious time when moving from one area to another.

The fished object reacts to different baits, and winter fishermen successfully use this. They use single hooks with bait, devils, jigs (regular and baitless). Everyone chooses gear and fishing method based on their own preferences. Let's take a closer look at what and how to catch bream in winter.

Float

Tackle with a float is used in reservoirs where there is no current, and differs from its summer counterparts only in its delicacy. In winter, bream is cautious, which is why it is necessary to use the thinnest elements in the equipment. A fishing rod for winter fishing for bream on a float consists of:

It is important to mention that the bite alarm in bream gear is usually placed so that only its short antenna sticks out of the water. Typically, anglers use from 3 to 5 fishing rods at a time, with the exception of the search stage of fishing. After a bream site has been found, you can drill and feed holes, arrange gear and wait for the first bites.

Mormyshka

Garland of devils

Helicopter

It is not known who and when invented this equipment, but in currents with a large concentration of bream, it is unrivaled. Fishing stores do not sell helicopter tackle, so fishermen make them themselves. To make such a design, you need:

put a sinker weighing up to 40 g on the main fishing line (not thinner than 0.25 mm) and secure it on both sides with stoppers;
tie a swivel to the end of the fishing line;
to the swivel, a meter-long leash with a diameter of 0.18 mm with 3-4 hooks;
to the leash - a lid or bottom cut out of a tin can.

The tin plays a major role in this rig.

It is important that the fishing line passes exactly through the center of the tin disk, so it will be carried away by the water flow, and the hooks with bait will begin to play temptingly.

Harvester (dumper)

If it is not available, or for the sake of experimentation, the following are a good idea:

The most catchy gear

Every experienced fisherman has several favorite, most catchy jigs in his arsenal. Beginners just have to figure out which tackle will be more successful for catching bream and other predators.

Let's consider several popular models:

Drobinka . A small ball with one hook. Ideal for bait fishing. For catching bream at depth, tungsten jig pellets are also made.
Oatmeal . Product in the form of an oat grain. Can be used without bait.
Devil . Vertical suspension rewinder with suspended tee. Bream simply loves this tackle!
Banana . The color and shape resembles this fruit. Also loved by many predators.
Bedbug . Cylindrical shape with cut off inner part.
Balda . It is made in the shape of a cone, with hooks suspended from it on a fishing line.
Ant . Metal body, segmented along its length.
Parrot . A drop painted in bright colors, soldered on the outside of the hook.

In the case of ice hunting for bream, there are no universal options; each angler chooses something different. Try, experiment and you too will find the best option for yourself!

How to pick a devil for bream

The devil is an effective jig that is most catchy when ice hunting. The bait is capable of awakening both the food reflex and banal curiosity in underwater inhabitants, forcing a passive or well-fed bream to grab a tasty object.

Not every trait is equally productive. There are models that are not able to interest underwater inhabitants. The bream can only poke and butt the bait, but it will be impossible to detect it. There are jigs that encourage fish to immediately attack them, confidently sitting on the hook.

Shape and color of the trait

The result of fishing depends on the correctly chosen shape of the jig and its color. The catchy devil for bream has an elongated body that slightly widens downwards. Round short modifications almost do not work, except for small underbream, silver bream and roach.

Note! Experienced fishermen keep curved models or devils with free-hanging hooks in their ammunition. The color of the jig must be approached carefully

The most versatile and catchy little devils are black in color, possibly with white and yellow dots or stripes. In good lighting, matte shades such as copper are used. “Silver” and “gold” work in cloudy weather

Read Fish of the loach family - types, features

The color of the jig must be approached carefully. The most versatile and catchy little devils are black in color, possibly with white and yellow dots or stripes. In good lighting, matte shades such as copper are used. In cloudy weather, “silver” and “gold” work.

Lure sizes

The size of the devil for catching bream is selected based on the potential weight of the prey that can be caught in a particular body of water.
However, there is no point in using bait less than 1 cm long. The weight of the jig depends on the following factors:

depth at the fishing site;
presence and strength of current;
horizon of fish parking;
the gear used.

Since bream in most cases is caught at depths of 5 meters, the weight of the devil is selected from 0.8 grams. It happens that you have to use bait weighing 3–4 grams.

Photo

Next you can see the photos of jigs:

Tips and tricks

If you have chosen a deep place and made high-quality complementary feeding, but there is still no bite, do not despair! Sometimes in a particular place it’s worth trying your entire arsenal of bait.

The fish are not interested in bloodworms - feel free to change the tackle; bream rarely refuses bloodworms. Also try jigs of different shapes.

At the very beginning of freeze-up, it is worth trying small, playful jigs such as shot or oatmeal. In late winter, when the ice is already quite thick and the underwater world is plunged into darkness, brighter and more unusual models can “shoot out”. You can try glowing phosphor jigs. They attract the attention of bream from afar, awakening in it the excitement of a predator even in the dead of winter.

DIY making

For some fishing enthusiasts, making a jig with your own hands may be an interesting and exciting activity. For this you will need:

plaster, can be from a set for children's creativity;
sweet water;
Matchbox;
soap solution;
molten lead;
jig from which you need to take a cast.

Manufacturing process:

First you need to prepare the gypsum mixture. It is made in the following proportion: 1 part sweet water and 2 parts gypsum. Mix thoroughly and pour the plaster into the matchbox, leveling the top.
Dip the jig you want to make a copy of in a thick soapy solution and let it dry.
Next, you need to lower the jig into the plaster and after 20 minutes treat the entire surface with a soap solution.
After this, we take the second box and also fill it with plaster.
Without hesitation, we turn the first box of bait onto it.
After 20-25 minutes we separate the boxes.
In the resulting form we make a groove for casting and wire.
Both parts of the mold should be dried for 8-10 days.
Now you can start casting. You need to take a hook and wire of a suitable size, put them in the mold and cover with the second part. Melt the lead and carefully pour it into the mold. Leave until completely hardened.
After the finished jig is removed from the mold, it needs to be brought to a shine using sandpaper and painted to your liking.

The hand-made jig is ready, you can try it out!

The main advantage that comes from catching bream with a jig is, of course, more effective fishing. The fish is attracted by the play of a beautifully designed object and arouses in it the excitement of prey that weakens in winter.

In addition, fishing with a jig does not require putting a bait on the hook in the cold before each dive of the tackle. Using different types of jigs, you can choose an option that allows you to get excellent results even in the dead of winter, when bream in winter simply “throws” at the jig.

The main thing is to have a whole range of different types of equipment when fishing and be able to quickly adapt in the absence of a bite. Some will be good for catching bream in December, others - from under the thick January ice.

It is unlikely that you will be able to once and for all choose the only effective jig for any occasion. Those who do not experiment are often left without the desired catch.

We invite you to watch a video on how to make a jig with your own hands:

Choosing a catchy jig for catching bream

The choice of jig for bream depends on the depth of the reservoir in which you want to fish. For shallow places of 2-4 m, small jigs are best suited: “drop”, “ant”, “lentil” or “pear-shaped”. In a place where the water is deep, it is better not to fish with a small jig, because such a jig will not be able to pull the line with its weight. Because of this, you can miss the bite.

Below are the types of jigs:

nozzleless
tungsten
lead
from beads
phosphorus.

In shopping centers or on the Internet, it is better for a novice fisherman to buy jigs of the following types:

goat
devil
pellet.

This type of jig most often attracts the attention of fish. However, if we talk about big fish, then you need to pay attention to larger options.

Pay attention to the following type of jigs with a bead - reelless jigs for bream .

Bream on a jig in winter

Fish in winter in December are not very active, so special winter jigs are created for this time of year, which are not particularly large in size and weight. After all, winter fishing means fishing in places where the water is shallow. Usually, additional nozzles are used for winter jigs, but there is also a type where no nozzles are used.

Fishing Tips: Winter Fishing Rod for Narwhal Frost - How to Best Use it

In the next video you can familiarize yourself with the techniques and tactics of catching bream with a jig in winter.

Winter fishing rod and jig tying

First, let's look at several ways to tie a jig to a fishing line. The video shows three very simple and very reliable ways to tie a jig to a fishing line.

We also recommend a useful article with a review of fishing knots, in which you will learn how to make a competent fishing line connection reliably and simply.

It is best to purchase a fishing rod in a store. Luckily it costs quite a bit. You can, of course, go crazy and make a handle out of wine corks, but you will have to organize a reel or reel to store the fishing line on the rod.

The whip is also a very important part of the fishing rod, because it becomes a shock absorber when fishing for fish. You can also use a whip to adjust the frequency of vibrations while playing with a jig. It should have a thin and flexible tip, because winter fishing line usually has a diameter of 0.1-0.15 mm.

The nod (guard) is a sensitive element of the fishing rod. It is selected individually for each jig, because the quality of the game depends on it. The nod should not change its properties in cold or strong winds. for the quality of her playing depends, above all, on him.

The fishing line must be made of a material that can easily withstand such low winter temperatures. The fishing line is selected according to the type of fishing (jigs or spinners) and the expected size of the prey. Winter line is usually thinner than summer line because the fish are less active. For jig fishing, it is recommended to use monofilament.

Video about choosing a winter fishing rod for beginners, features of gear that you need to know about when purchasing a fishing rod:

Which bait to choose

Good bait significantly affects the result of a rich catch. Of course, there is no universal recipe that will make the fish bite in all situations. But you should still adhere to some rules when preparing winter complementary foods:

Choosing a fishing spot

With the arrival of frost, the bream will try to stay at a depth of more than 5 m, where the cold will not reach it.

So you will have to look for fish where there is great depth . We use a fishing rod with a jig as a search engine, having first decided on its size. Bream prefers to be a bottom-dwelling fish, which rarely rises from the bottom, so you have to hit the jig directly on the ground of the reservoir.

The nuances of fishing in the spring. Things to consider:

Spring is spawning time. All fish actively prowl in search of food. And bream, which, by the way, has a very expanded diet, is no exception. It can swallow not only fleshy foods (worms, larvae), but also plant foods. So when catching bream, you shouldn’t focus only on animal bait.
It is important to know the places where bream prefers to spawn, and better yet, the places where it migrates are precisely river mouths. There will be excellent fishing for the angler.
Fish for spawning are attracted by dams and pit exits located near oxbow lakes.
You will need a bottom or float fishing rod, depending on the reservoir.
When preparing for spring bream fishing, there should be no unregulated little things.
The best spring bait will consist of plant and animal “ingredients”.
The fishing area must be saturated with the aromatic composition of the bait.

If you are a fan of winter fishing and don’t mind catching other fish, for example, perch or roach, then be sure to check out the review of the “Cat’s Eye” jig, which is often very catchy.

Keeping all these features in mind, all the efforts that the angler will make to prepare for fishing will be generously rewarded with a successful catch of a wonderful fish - bream.

This type of fish prefers to stay in schools in winter, just as in summer. Therefore, once you get to the bream place and feed it well, you can get a decent catch in a short time. at the same time, depending on age, bream behaves differently and chooses different places: