Flies for chub - fishing features, production and purchase

Tackle for fishing grayling with flies

This fish is a desirable catch for any fisherman. Therefore, it is not surprising that such effective tackle as a fly is used to catch grayling. Catching fish with this bait leaves the opportunity to choose gear for almost any conditions or preferences of the fisherman.

Fly fishing

Sufficiently effective and simple gear. In most cases, it is recommended for beginners. The gear consists of: a rod, a fly, a reel and a cord.

For successful fishing, all you have to do is learn how to cast correctly and you can go hunting for grayling.

Spinning

The equipment used for spinning for grayling is unusual. For successful fishing you will need an inertia-free reel and a bombard for longer and more accurate casts. The use of a leash is also mandatory. A fishing line from 0.2 mm is suitable for it

Tackle "boat"

The boat tackle is one of the oldest ways of catching grayling. This type of tackle consists of non-sinking material (foam is most suitable), a rigid spinning rod and leashes of different diameters. The principle of such fishing is simple: a floating structure is floated downstream, leashes of different lengths are tied to the main fishing line, and the fly itself is attached to them. This method of fishing is very old and fascinating. It was used to catch trophy fish, and, as a rule, large fish are quite careful.

"Pull"

“Peretyag” is another ancient, but at the same time working method of catching grayling and other types of fish that feed at the surface of the reservoir. For this gear you will need two fishermen on different banks. Here, as in the case of the boat, leashes with flies are attached to the main fishing line, but instead of the boat, a second angler will serve. He will fish out the caught trophy, and another person will play off the fishing line. This is the fishing method our great-grandfathers used.

Fly fishing gear for chub

But fishing in such places is not entirely easy; holes are mainly formed near snags and trees, which means that many snags are possible. But to avoid this, you need to examine the reservoir more carefully. For fishing on small rivers and streams, it is better to use small rods no more than 4 meters long.

Tackle. Different gears are suitable for this. These are two-handed grades 5-6, one-handed grades 2-4, and switch rods. For such fishing, lines need to be floating or floating with sinking tips. Any reel with sufficient capacity will do.

Technique. Throw the fly upstream from the fishing spot and pull the line. And in small strips, pull the fly towards you, with a pause of 5 seconds. A bite can occur at any time, both during a pause and at the moment of pulling the cord. Usually the fish is immediately hooked during the strip.

Conditions for fly fishing

Fly fishing for chub begins after the ice has melted and lasts until the onset of autumn cold weather. Fishing can be carried out around the clock. The chub is most active at dawn and dusk. At night it bites less often, but very large specimens are caught. In the middle of the day, biting activity noticeably drops or stops.

Constant changes in weather can reduce the intensity of the bite or stop it altogether. For fly fishing, you need to wait for the weather to settle for 2-3 days and the atmospheric pressure to be relatively stable. When fishing, a good indicator for a good bite can be a slight wind and light water ripples. In such weather, the chub is more active and less cautious.

In warm weather, chub are often found in places with fast currents and on riffles. When the air temperature drops, it tends to move into the water column and into a calmer current. These may be places under the branches of coastal trees or bushes. Various insects often fall from them, the main interest of which are beetles. It is not uncommon for a chub to be found near whirlpools. Mud, which resembles a strand of hair, can also serve as a habitat for chub. It can also be found at the boundary of two currents that move at different speeds. The presence of active movement in the indicated places indicates that there are fish here and you can start fishing. But fishing and catch in these places may vary depending on the time of year.

When the spring water has not yet warmed up, the chub stands at the exits of the holes, as well as at the boundaries of the rifts. The depth at which it is located is about 1.0-1.5 m. As the water warms up, it rises to half-water or to the very surface.

In summer it is caught in the upper layer of water. Here he will remain until the cold weather comes. The onset of cold weather and a decrease in the number of insects will not affect the intensity of chub biting. In September, its bite is especially active and continues for quite a long time.

In October the cooling will be noticeable. The chub will leave the rifts and will move into the pits along the sea of decreasing temperatures. On rare warm days in October-November, he will emerge from the pits, but will not go far from them. This season, surface fishing near these holes will be relevant. With the onset of stable cold weather, it will be impossible to catch chub with fly fishing.

Features of chub fishing

When planning to catch chub, it is worth taking into account the nature and behavioral characteristics of this fish. The chub mainly lives in rivers with active currents, the waters of which are saturated with oxygen. Most often it swims near the surface of the water. It descends to the bottom only from mid-autumn and lives there until the end of spring. A change in the behavior of fish and a change in the depth of habitat occurs at a temperature of 12C.

This type of fish prefers clay-rocky and hard sandy bottoms. It is almost impossible to find chub in places with a lot of silt. Most often, this fish can be found on bends and rifts of rivers, as well as near wooded banks. The fish can swim for a long time near bushes and trees hanging over the water, waiting for insects falling from the branches.

The chub is a rather shy fish. Having noticed a person on the shore, he will immediately go into the depths, ignoring any bait thrown at him. Therefore, you need to approach the shore carefully and maintain maximum silence. However, fish are often attracted to artificial structures in the form of dams, bridges and piled piers.

What does a chub look like?

Regardless of the time of year, chub can be caught using flies. However, in the summer, the bait must be light in order to float at the surface of the reservoir, and in the fall and spring it must be heavy, sinking almost to the bottom.

When fishing, it is important to choose the size of the hook and the number of weights. Hooks can be used under numbers 1 – 18. However, given the rather large size of the fish’s mouth, it is better to go with hooks No. 10. The number of weights depends on the speed of the current in the reservoir.

Fly Selection

The advantage of flies over their live counterparts is their ease of use. This universal bait is suitable for both catching non-predatory fish and predators.

All flies are divided into several types:

dry (DryFlies);
wet (WetFlies);
nymphs;
streamers;
emergers;
fantasy;

Dry flies resemble dragonflies, mayflies, flies, caddis flies, botflies, wasps and other insects that have fallen on the water. They are made in such a way that they do not sink in water and are designed for catching fish from its surface. They are held on the water by legs and a tail knitted from hard bird feathers. To make dry ones lighter, the hooks for them are made of thin wire. Until recently, all dry flies were tied in a fantasy style, which did not require resemblance to real insects.

With the advent of new synthetic materials, they are increasingly being manufactured in a super-realistic style, providing for the maximum imitation of living organisms. Dry flies are considered universal and are excellent for catching asp, bleak, chub, rudd, and roach.

Nymph

Wet flies are baits that look like drowned insects, small crustaceans, water beetles, leeches, tadpoles, as well as insect larvae developing in water. They are distinguished from dry flies by a very thin body, wings curved towards the bend of the hook, and the presence of legs and a tail. Wet flies are tied on a thicker hook.

This type of bait has proven itself well in fly fishing for grayling, salmon, and asp, but recently anglers have been using nymphs more often.

Nymphs are designed to imitate various insects at different stages of their underwater development from larva to pupa, which are part of the natural diet of grayling and trout. Because of this, almost all recent sport fishing competitions for these fish have been won thanks to nymphs. They are made in both fantasy and realistic styles.

The main requirements for such a bait are a clear imitation of the color of an insect for a specific body of water, the exact size and segmentation of the body, as well as a hook loaded with lead wire.

Streamers are similar to fry and are designed to catch large predators. This is the heaviest type of fly. The streamer hook is additionally equipped with tungsten or steel, which, when wired correctly, makes the bait look like a wounded fish.

Emerger

Emergers are a type of nymph that mimic an insect in its metamorphosis stage (between pupa and adult form). Grayling responds superbly to such bait, especially during the mayfly season. Independent tying of emergers has turned into a whole trend in fly making. There are even specialized clubs that unite craftsmen in this matter.

Fantasy flies are baits that have no prototypes in nature. Their size, color and shape can be anything.

They are divided into several types depending on the type of fish that is supposed to be caught:

grayling;
salmon;
trout;
asp;
dace, etc.;

Fishing with fancy flies is based on knowledge of the behavioral characteristics of a particular fish, as well as its food preferences.

There is also such a type of flies as frame or decorative ones. They are knitted from expensive and exotic materials. Such flies are not used for fishing, but serve only as an exhibit at various collection exhibitions and knitting competitions.

Flies for catching large chub

The chub's favorite delicacy is various bugs, grasshoppers and insects. This means that the flies should also be similar to them. They are made from foam. The larger the fly, the larger the chub you can catch, so you shouldn’t put baits that are too small. You can fish with both wet and dry flies. You can also use small streamers.

One of the best lures for fly fishing is the use of a streamer. It has a better chance of catching big fish. Because only the large chub begins to chase the fry. Driving the streamer along the bottom can be successful. The color of the streamer must be selected on site, depending on the color of the water. The main thing here is to choose the weight of the bait so that it plays well near the bottom. Success comes from fishing with short strips against the current.

As for flies, there is no specific fly for catching large chub. It can be caught with both wet flies and dry flies, designed for catching other fish.

Use flies of insects that live in this body of water. Tie them yourself, and you will be guaranteed a catch.

Assembled tackle

The modern fishing world is rich in a wide variety of different gear. There are several possible options for fly fishing in this list:

Fly fishing gear, which consists of a rod, reel and line. It is the oldest device for fly fishing. Fly fishing is a broad and constant creativity and experimentation of fishing with light bait that imitates an insect. The tackle is particularly delicate and requires a lot of experience and skill from the fisherman.
Ship. This tackle is a wooden device to which a fishing line with leashes is attached. The fisherman is on the shore, and the boat floats downstream. Flies on leashes cover a large area when rafting. This tackle shows excellent results on asp, perch and chub.
Spinning tackle with a bombard. A sbirulino or bombard float allows you to cast a spinning rod over a very long distance. To equip it, first put on a float, then a few swivels and finally a leash with a fly. Considering the positive buoyancy of the float, the bait does not sink, but is carried in the upper layer of the reservoir. This tackle is suitable for catching any type of fish listed above.
Spinning tackle with barbs. This tackle is designed for catching perch. A sinker is attached to the end of the rig, which will stretch along the bottom. And above the load, leashes with flies are tied at equal distances.
A tug is a tackle for catching chub, which consists of two spinning rods connected to each other by a fishing line. When fishing with this gear, anglers stand on different banks of the reservoir, and leashes with flies are tied at the level of the middle of the river. By twitching the spinning rods, the game is played with flies. Considering the fact that anglers are far from where the bait is playing, this tackle is great for catching the most wary fish species.

For fishing with flies, you can use several types of gear:

A “water kite” or boat is a tackle consisting of a foam, wooden or any other floating body to which a fishing line called a “stave” with several leashes is tied. The main spinning line is attached to its other end. The “snake” is cast away from the shore with the expectation of its further movement with the current. This gear is used to catch schooling fish such as asp or grayling.
“Peryatyaga” is a device consisting of two spinning rods located on different banks of the river. A “bet” with leashes is stretched between the spinning rods. To operate this gear you will need two people who will slowly move along the banks against the current. “Peretyaga” works well on rivers with moderate currents when fishing for chub and roach.
Fly fishing is a classic tackle for fly fishing. It consists of a special fishing rod equipped with a long cord with a leash. Ideal for any conditions when fishing for chub, roach, grayling, asp, trout, salmon, etc.
Spinning. Can be used both with a weighted float of the Sbirulino type, and with weighted types of flies.

Fly fishing consists of the following elements:

rod with reel;
coil;
cord with backing, running and leash;
bait (fly);

A special rod is used for fly fishing gear. Today on sale you can find fly fishing forms ranging from 2 to 6 meters in length. They can be one- or two-handed. The latter are used for fishing at considerable distances, and casting the tackle is done with both hands.

One-handed fishing rods are more popular due to their ease of use. Most often, blanks up to 3 m long are used. Fly fishing rods are made of ultra-light carbon fiber. The weight of the longest blank does not exceed 200 g. Like all fishing rods, they are divided according to action from very fast to slow.

The equipment is quite simple at first glance, but it must be put together correctly:

To begin with, the main line is wound onto the spool of the reel to the level of comparison with the restrictive sides.
Next, the end of the fishing line is passed through all the leading rings on the rod and brought out at a distance for conveniently equipping it with additional elements.
The first rubber stopper is “put on” the fishing line, which will prevent the bombard from moving from the planned level.
Next, the main line is passed through the ring on the float, followed by the second limiter.
A swivel is tied to the end of the fishing line, and a leash with a hook or other fishing gear (for example, a spinner) is attached to it.

Material for making fly fishing flies

Well, the first thing you can’t do without is hooks. The requirements for them are determined by the nature of the bait that you intend to tie.

For dry fishing, the lighter the hook, the better. Thin strong wire and the eye is bent upward. This is necessary so that the leash does not touch the water.

A wet fly is not so sensitive to weight; the eye of the hook is bent downwards. When making streamers, hooks with a straight eye are often used.

Hooks are not always single; double hooks are also used successfully.

And then the variety of what can be used is amazing.

Various threads, feathers, wool, down, fur, lurex, synthetic materials and of course varnish.

The threads used range from synthetics and nylon to wool and silk.

They can be distinguished by two types of use: mounting - for attaching various elements to your bait, and thread for tying the body.

Such threads are most often waxed, which improves adhesion to the hook and improves strength.

You can take a variety of feathers, depending on the properties and the part of the fly that is being tied; they are taken from different parts of the cover. These include marabou, ostrich, pheasant, turkey and duck feathers, peacock feathers and many others.

Wool, fur, hair and some synthetic materials are used to form the body of the bait. Most of this material is called dubbing, is connected to the mounting thread and serves as an excellent imitation of the body of an insect.

Wool and hair are often used to make streamers. The choice is also very large and, of course, there are very specific requests, such as “snow leopard undercoat,” but often they can be replaced with other materials with similar properties.

Lurex also forms some body features and comes in a wide variety of colors.

Varnish will be needed to secure the knot on the head of your imitation insect, form some fly bodies and add shine.

It is best to take fairly liquid nitro varnishes; they will absorb better and dry faster.

Here is a basic set of materials for tying flies.

How to catch a chub with a bombard fly in the summer

The chub, like all representatives of the carp family, is a strong, persistent fish that does not give up until the last. It feeds mainly on live food - insects, grasshoppers, worms, frogs, and juvenile fish. The large chub is very voracious. But at the same time, like all cyprinids, he is very careful and timid. The bait should be presented more naturally. Fly fishing tackle meets this requirement to the greatest extent. However, in the presence of bushes and overhanging trees, this is very problematic. For such conditions, there is gear that is a kind of mixture of a fly fishing rod, a spinning rod and a float rod. This is sbirulino or bombarda.

This tackle was invented and named in Italy for trout fishing. However, you shouldn’t give all the credit to the Italians. Many experienced fishermen used similar gear back in Soviet times, where special floats filled with water were sold. This tackle has been successfully used for catching other types of fish, including chub.

It is for the chub that the tackle in question is most suitable, since it likes to stay on the flow of small rivers above overhanging trees. An elongated spinning rod with a soft action is used as a fishing rod for casting light baits, larvae, and beetles. To cast equipment over a long distance, use a special heavy float.

Front sight and spinning rod

Ballerina sinker

The key point when selecting tackle using flies is the selection of the sinker. Considering that its main task during the hunt will be to move along the surface of the bottom, the optimal option for a weighting material is a spherical or pear-shaped shape. If fishing is planned in an area with a strong current, then choose a heavy sinker, and to catch prey in calm water, choose a light one. The shape and weight of the sinker directly depend on the specific fishing conditions.

For information! A “ballerina” sinker, made of wire material, with an eyelet at the end, is good because it reduces the likelihood of snagging.

Spinning equipment:

Rod. The length of the fishing tool is 3-3.5 m, the action is medium. For fishing in overgrown areas of the reservoir, it will be important to use a light spinning rod 1.5 m long, and for fishing hard-to-reach places - a soft rod with a light weight.
Coil. The model used must be from a trusted manufacturer and equipped with a smooth handle.
Hooks. For fly fishing, it is more rational to use a double hook; it is more reliable, unlike a tee, from which the prey can easily get off (shake off). Another advantage of this choice is less snagging in dense vegetation.
Main line. When catching fish with a fly, it is good to use monofilament or braid. If you use a braided thread, the sensitivity of the gear increases. And in the case of monofilament fishing line, the artificial insect begins a more active and interesting game.
Float. A plastic version in the shape of a teardrop will be most successful here, where its narrow part goes to the fly, and the thick part goes to the rod. But devices that are spherical or thick in the center are quite appropriate.
Leash. The length of the leash is adjusted depending on the type of bait used; it can be 1.5-2.5 m. The material used is monofilament, conical undergrowth.

There are two ways to assemble the gear:

The leash is mounted first, and the sinker second. This option is effective when working on a flat bottom surface.
The sinker is fixed first, and then the fishing line and leash. This is an excellent piece of gear for fishing from the coastal zone.

Options for spinning rods with a float

Assemble the tackle as follows:

Attach a “ballerina” to the thread wound on the spool.
Attach 2-3 leashes up to 5 cm long to the sinker, or 1 long one. It is best to use short leashes that prevent tangling of the line during fly fishing.

If the sinker will be fixed at the end, then mount it on a thread of smaller diameter than the main one. This approach will prevent the fly from breaking off when hooked. When catching predators or other fish in the upper and middle layers, it is more advisable to use floats rather than sinkers. They are mounted both in front of the float and behind it.

Depending on the fishing conditions, the technique is also selected.

Fishing techniques on rivers (on the current)

The cast is made upstream, when the sinker is at the bottom, you need to select the line until it bends slightly. The work of the load is carried out due to the force of the water flow; the main thing is to control its approach to the coastline and the watercraft. Artificial baits, moving with the current, do not frighten potential prey and make it want to attack it.

When moving the fly with the current, the work occurs on the surface. Casting should be done perpendicular to the coastal zone. There is no need to choose a fishing line here; the flow of water will carry it out on its own. The bait should be started when the sinker, having reached the rod, is directed towards the coastline. The main thing is that the front sight should remain in the upper layer and periodically appear on the surface

This behavior of the bait almost immediately attracts the attention of potential prey.

For information! Casting bait on a river should be done at an angle of 45 degrees, while keeping the line above the surface.

Fishing in still water

Wiring on lakes and ponds is carried out by ourselves. Being on the shore at an angle to the water flow, the bait is cast obliquely. To attract fish, the artificial insect must be frozen for some time, after which it must be gently shaken with the tip of the spinning rod. If there is no bite with the left hand, stretches are made through the index finger on the right. To avoid discomfort when fishing, you must choose a promising place on the site without excessive vegetation.

Chub baits and lures

Catching chub on:

May beetle. The cockchafer bait performs best from mid-April to early May, when the most active flight of the insect occurs. Carp, carp, and catfish are also caught with bait; grasshopper It replaces the previous bait, since the activation of the insect’s flight begins after the end of the hunting season for the cockchafer. With the correct attachment, the technique ensures a good catch and is not inferior to the crustacean

It is important to take large grasshoppers, then the likelihood of catching a trophy individual increases significantly; wobbler The predator grabs a wide variety of species, but there are also the best wobblers for chub

In spring it is best to use Jackall Chubby, in summer the choice falls on Yo-Zuri L-Minnow 44S, and in autumn Lucky Craft Bevy Crank 45DR;

The chub is a half-predatory fish, so it is caught using various baits of animal and plant origin.

cranks. The tendency of fish to pick up insects that have fallen on the water can be used against it; crankbaits will help with this. Such surface lures are especially effective when moving close to fish. The Moca 25SR model has proven itself best, but Sonic Cara and Peppy 27F are also popular; chicken liver. Many people believe that it is better to bait a liver slightly treated with boiling water, but this loses the very essence of the bait. Catching chub with the liver is successful due to the fact that blood particles are still released from the liver tissue, which carry the smell throughout the reservoir even at a shallow immersion depth. The smell attracts predators even from other areas of the reservoir; microoscillators. Spinner spoons should be used in strong currents; this is where their play is at its best. Micro-oscillators require wiring. Initially, smooth movements are tried, if they are ineffective, stepwise wiring is used. Best options: THOMAS EEL, MYSTIC JUKE, FOREST CRYSTAL; flies. This chub bait resembles various midges and other flying creatures that have fallen into the water. The predator begins to feed on them immediately after the water warms up; already with the first warming, the number of flies becomes countless

The fish are losing caution and there are confident chub bites on 3 main flies: brown caddis, March Brown and Red Tag; crust of bread Fish can be caught not only with animal bait, since the chub is an omnivorous species

In combination with this bait, it is worth using several others, since the tastes of fish in different bodies of water, and even areas, may differ; live bait The effectiveness of baiting a predator lies in the peculiarities of its behavior in late summer and autumn. In these times, when the number of insects decreases and food for the predator becomes scarce due to great competition and lack of falling prey, the chub looks for other methods of feeding. There are many toads on the river bank, and in the reservoir itself there are smaller fish, this becomes the main food of the predator. For successful hunting, it is important to determine the type of fry, of which there are the greatest number in the reservoir. With this species you will be able to catch the maximum number of fish; peas Fish feed throughout the day and respond well to various baits; you can also try peas. If you can’t get a bite from steamed or fresh peas, you should throw peas into the predator’s habitat for several days as bait. Chub go well with peas in spring and summer; in autumn it is an ineffective bait;

It is worth noting that large chub eat almost everything that gets into the water, from berries to fry and small rodents

turntable. Rotating spoons are used in both small and medium sizes. The predator can be picky, and in order not to return home empty-handed, you should have 7-10 varieties of spinners in stock. Catching chub with a spinner spoon is most successful with the following bait models: Mepps Aglia, Myran Agat, Blue Fox Super Vibrax;
cockroaches The cockroach bait differs little from other methods of fishing for insects. You can buy it (Imakatsu abe yanma) or make it yourself.

Lures for fly fishing for chub

Today, dry and wet flies are often used, but small streamers are also used.

For fly fishing for chub, it is recommended to choose a fly that can go deeper into the water column

Flies for chub fly fishing

The chub often feasts on bugs and various insects that fall into the water. Flies imitate the predator's usual food, lulling its vigilance. Some extravagant options are also effective, but you will have to experiment for a long time to find a successful bait.

When choosing a dry fly, it is better to give preference to models that have an extremely invisible hook. Covered hooks are less likely to catch grass or branches, and the chub bites more actively on well-camouflaged models. The options that meet the described requirement are: Wooly worm, Wickham's Fancy, Ant.

Typically the fly is made from foam. One rule applies here - with a large fly there is a high probability of catching a large specimen, therefore, you should not put small baits. We recommend making a lot of turns of the pen, but not too much. If you feel that the hook is being pulled out of the prey’s mouth, it is better to reduce the number of revolutions.

The streamer is effective in catching large fish, because only in the second year of life the chub begins to chase fry, when it reaches a size of 20-30 cm. In shallow water, running along the bottom is often effective, but it is important to choose the right color of the bait taking into account the water. The main difficulty lies in selecting the correct weight of the bait so that it plays near the bottom. Wiring in small strips against the flow of water turns out to be successful.

Trabucco carp line

Other attachments for fly fishing for chub

Fly fishermen often use the cockchafer as a bait; although the bait is seasonal, it is extremely effective. It is better to fish for beetles on rapids and rifts, taking a position at the top of the current and floating the bait down. It is better to fish without using a float, and the hook is threaded through the body of the cockchafer so that the point sticks out. It is better to do the hooks sharply, but at half strength, so as not to tear the bait out of your mouth.

In the second half of April and throughout May, the air temperature increases, and a beetle appears - the chub’s favorite dish

As summer approaches, the chub becomes a picky predator and will not attack any bait. It is important to frequently change baits in search of a more promising bait, one of which is the grasshopper. At night in warm weather it is good to catch moths; there are a large number of them in nettle thickets. You can also use flies, but you should plant 2-3 pieces at a time.

Fishing technique and tactics

This will prevent unnecessary noise from being created, which will scare away the chub:

The movement is made only by the hand that holds the rod.
The second hand controls the cord. When gripping the rod, the thumb rests on top of the handle.
Before casting, make several idle movements with the rod.

This is necessary in order to adjust the length of the cord, calculate the casting distance and accuracy

Particular attention should be paid to the silence of the cast, that is, in an ideal cast we should only hear a small splash of the fly falling into the water. Most often, the fly is cast a little upstream from the selected point where the fish is supposed to be located.

The chub bites sharply and quite strongly; its bite can be easily determined by a good tension of the cord or a strong splash near the fly. Having swallowed the bait, the chub abruptly goes into the depths, depending on where the fish went, it is necessary to either loosen or tighten the cord. Hooking is done with the rod up and to the side. You need to pull out the chub calmly, without sudden jerks, they can create additional stress on the tackle and the likelihood of the fish leaving is high. If the fishing process is delayed, the chub can lead the fishing line under a snag or a drowned tree. Therefore, we don’t rush, we don’t make sudden movements, but we also don’t hesitate too much - everything should be optimal. Having tired the fish, we pull it towards us, the rod being as vertical as possible during the fishing process.

If everything is done correctly, then the chub will definitely end up on the shore and it will be possible to take a photo with our trophy as a souvenir.

Where to look for chub?

Of course, there is hope for fish and bites, but the dull picture of lifeless coastal vegetation, just freed from snow, does not inspire optimism. The water is not particularly cloudy, but not entirely clear either, its level is higher than usual. We immediately cross out riffles and places with fast currents from promising places. According to our logic, the chub should stand in quiet places, in holes, on coastal shallows under overhanging trees. Of course, we are considering fishing near the bottom with slow retrieve. There is no smell of insects flying out yet - the chub has nothing to do on the surface.

Catching chub with a bombard

The chub, although a fairly large fish, will not be tempted to bait if it notices something suspicious. He is not caught if he sees the fishing line and the direct presence of an otherworldly object in the water. This object is often a person entering the water.

If you have to go directly into a pond, the fisherman must stand and not move his legs (raising the mule scares away the chub). Fish have good hearing and when fishing it is necessary, if possible, not to make excessive noise at all.

Very close to the shore - the chub practically does not approach and it is better to look for places more remote and with a rapid flow.

Features of catching chub with a bombard:

Catching predatory fish must be approached with all seriousness of the process. Initially, you need to make sure that you have a complete set of equipment and that it is in good working order.
It is also necessary to monitor the weather, because sudden changes in pressure affect not only humans, but also the chub’s desire to hunt.
The best time for fishing is morning and evening. At lunchtime, the chub, as a rule, “rests” and catching one is a rare success.

If you follow all the rules and recommendations, the chub in the cage is guaranteed!

Dry artificial flies are used for catching roach, chub, rudd and other types of fish. Another advantage is durability, so you can use artificial flies made by yourself for a long time. https://www.oster-vip.com.ua/masterskaya-rybaka/mushki.html
Delicious flies for grayling with your own hands. I catch chub on the Chusovaya River (sometimes on the Barda, a tributary of the Sylva in the Perm Territory) and for several years I have already adapted to its culinary preferences on this reservoir. https://valeraprivalov.ru/mushki-na-golavlya-svoimi-rukami/
The chub is found in many large and small rivers of the European part of Russia. We continue our story about the features of fly fishing for chub on small rivers. https://www.youtube.com/watch?v=ECsah18UXeA
Roach, rudd, chub, etc. react to such baits. Such flies are very difficult to make, as they require special skill. As a rule, such a fly is used for catching predatory fish. https://FishingDay.org/mushki-dlya-rybalki/
Lurex. DIY dry fly. To make a simple fly you will need several brightly colored hairs, about 5 cm long. It is preferable to use a bright black or bright orange shade. Dmitry. Catching chub with wobblers. 14*** 0. https://rybalka.temaretik.com/1027340835276983067/kak-sdelat-mushki-dlya-rybalki-svoimi-rukami/
And the fly that seduces such a chub will certainly become a favorite. Flies for catching chub. A bite is felt as a light blow to the hand or visually, when the line stops. https://rybalke.net/lovlya-golavlya-nahlyistom
Do-it-yourself flies - manufacturing features. Flies - what are they? Dry flies are used for catching chub, roach, sabrefish and other types of fish. Effective BAIT for fishing is going to be banned from... https://prostokaras.com/snasti/mushki.html
Varieties of flies for fishing and how you can tie such a fly with your own hands. Watch the video and tie the “Alexandra” fly, you can use it to catch ide, chub, asp: How to tie the first fly. https://KakUlov.ru/snasti/rybackie-podruzhki-iskusstvennye-mushki/
To catch chub, real fishermen use various baits: small frogs, worms, various insects, greens. How to make a fly for fishing with your own hands? https://carpcarp.ru/lovlya-ribi/golavl/lovlya-golavlya.html
How to make a fly for fishing with your own hands? When fishing for chub, it is better to use dry flies that float on the surface of the water, which is why they show interest in the fish when they are in the field of view. https://poklevok.net/sport/spinning/mushka.html

Perseverance when catching chub in the fall is rewarded

When fishing for chub in the fall, you should not run along the river in search of fresh places. It is better if you know the places that have been tested during active biting and carefully study them. If in summer a chub most often reacts to a fly on the first cast, then in late autumn it can react to it on the fifth or even tenth time. In this case, persistence will help you a lot. If you are confident in the correct feeding and guiding of your fly in a particular place, then repeat this several times in a row, slightly changing the places of splashdown and wiring. I sometimes had the opinion that at some certain moment the fish’s nerves simply could not stand it, and it furiously rushed at the fly.

Choosing gear for fly fishing with a spinning rod

The main feature when preparing tackle for fly fishing is the choice of sinker. It should move easily along the bottom, so it is chosen in the form of a ball or pear.

For bodies of water with strong currents, the sinker should be quite heavy, and for fishing in standing water – light. Therefore, you have to choose a sinker with a certain weight for each body of water.

The best sinker is one made from a piece of wire with a loop at the end. It's called "ballerina". It is good because it produces fewer snags.

Spinning equipment:

It is recommended to choose a rod of medium action, three to three and a half meters long. For ponds overgrown with bushes and weeds, you can choose a light rod one and a half meters long. A soft spinning rod will allow you to fish with a light load and fish in places inaccessible to fly fishing.
The reel should be of good quality and have a smooth functioning handle.
A double hook is selected for reliable hooking of large fish, which are shaken off the tee quite easily. In addition, the double gets less caught on vegetation.
The main line can be either braided or monofilament. In high currents, the monofilament takes on the water pressure and makes the bait move more actively. With the help of braid, you can feel the work of the entire gear perfectly.
It is recommended to choose a plastic float, in the shape of a teardrop. Its narrow end should face the bait, and the thick end should face the fishing rod. However, you can choose floats that are thick in the middle or spherical.
The leash is selected depending on the type of fly chosen. Its length can be from one and a half to two and a half meters. To make a leash, monofilament or conical leader is selected.

Gear assembly

Fly fishing tackle can be assembled in two ways:

The leash is in front, and the sinker is at the end. This type of assembly is used for wiring along the flat bottom of a reservoir.
The sinker is in front, and the fishing line and leash are after it. With gear assembled in this way, it is convenient to fish from banks washed away by the current and in deep holes.

In order to assemble the tackle, you should attach a “ballerina” to the fishing line wound on the reel. Several short leashes of two to five centimeters or one long leash are attached to the sinker. When using short leashes, there will be no excessive twisting of the line.

If the “ballerina” or other sinker is located at the end, then it is tied to a leash, which should be thinner than the main fishing line. This will help preserve the flies when hooking.

To catch fish on the surface of a reservoir and in its middle layers, instead of a sinker, floats are attached. They can be mounted in front of the leash or at the end of the fishing line.