Rating of budget spinning rods for microjig

Microjig is a fishing method in which the fisherman needs to feel with his own hands everything that happens under water. Impact of equipment on the bottom or obstacle. Fauna activity in the immediate environment. Bites. The spinning rod must transmit any information, but this is complicated by the fact that the hunt is carried out mainly for small fish, whose bites are very weak and will go unnoticed for most fishing rod models.

Essentially, we need an ultralight spinning rod, but we won’t be able to simply buy the appropriate rod. To achieve maximum results, you should pay attention to the following aspects:

• rod weight;
• its length;
• test value;
• class and type of spinning rod;
• pommel type.

All listed parameters must be minimal. Weight - the lighter the better. Length - no more than three meters. Test - not exceeding 10 grams. As for the top, the ideal structure is considered to be one in which the outermost module is glued into the previous one. This significantly increases sensitivity and gives a better understanding of what is happening underwater.

There are many models on the market that fall under these criteria, and each has its own advantages and disadvantages. We have selected some of the best options that are ideal for microjigging. These are rods from top manufacturers and little-known brands, but only of the highest quality.

Spinning for microjig

Date: March 2, 2015 | 148

Of course, a spinning rod, a spinning rod, is one of the key elements of gear for microjig fishing. Naturally, special rods are used in this spinning class. I will tell you what a microjigging rod should be like in this article. The question, on the one hand, is simple, because... microjig dictates a number of very clear requirements that a spinning rod must meet. On the other hand, it’s quite complicated, because and there are many different opinions here. I will describe the central line, so to speak, on which most spinners converge, and I will mention, in passing, other views. For the most part, I will express my vision. And there, let everyone judge and adjust the parameters of the rod to their own conditions, needs and understanding.

spinning rod for microjigging is . First, for those in the tank, I’ll tell you about the main parameters of spinning rods in general, what they are. Then, I will indicate the parameters that are typical specifically for micro jig gear.

Common parameters of a spinning rod: length, action, bait test, line test, rod weight, tip type, handle type and length, handle material, type, quality and quantity of guides, blank power.

The length is clear: how many meters is the total length when assembled. Action refers to how the rod blank reacts to load. Slow, parabolic (slow) - bends under load along its entire length, right up to the handle. Medium (medium or moderate) – approximately the upper half of the rod bends. Fast – only the tip works. Extra fast – practically does not bend. The test is the range of weights with which the rod copes well: casts comfortably, feels when retrieving. Indicated on the form as a range, for example: 0-5g, 1-7g, 2-10g, 10-35g, etc. The line test indicates the line breaking values ​​that can be used with a given fishing rod. It is usually indicated in pounds (1 lb = 0.453 kg). Rod weight – here it’s clear how much the rod itself weighs, in grams. Type of tip : tubular (tubular) or solid, glued in (solid). The T-type tip is more rigid and is a natural continuation of the blank. The top S is made of a softer material, glued into the form, it is more flexible and informative, like a nod. The type of handle can be solid or spaced. The length of the handle can be more or less long. As a rule, the lighter the rod, the smaller the test, the shorter the handle. The handle can be covered with cork or neoprene. Passage rings differ in geometry, frame material, and liner material. Depending on the length of the rod and the type of ring arrangement, their number may vary. It can be only 5 rings, or 7, 9, 11. The power of the form is a relative concept. This is an indicator of how the rod behaves under serious load, for example, when biting a large, strong fish. Two rods with the same declared test and action, at the same time, can show themselves differently under load - one will be rather weak and thin, and the second will be powerful, despite its external grace.

Parameters such as length, rod weight, bait test, line test can be read on the form. If something is not indicated, then look in catalogs and ask consultants. The model code can encrypt the length, test, purpose, tip type and other parameters. For example, 205UL T – length 2.05m, ultra-light, with a hollow tip.

In light of the above parameters, what should a microjigging rod be like ?

The length of a microjig spinning rod is, as a rule, not very long. For fishing in small bodies of water, in cramped conditions, use rods 1.8-2 m long. Average, universal value for fishing from the shore or boat: 2.1-2.4m. Longer microjigging class rods are extremely rarely used.

structure for micro-jigging is chosen to be fast - a fairly rigid blank and a relatively soft glued-in tip. This blank ensures proper sensitivity, and the tip works out all the movements of a light bait, working like a nod. However, the statement about fast construction is not so clear. Some anglers claim that it is better to fish with softer rods. It is clear that the tactile component decreases, but the wiring is controlled visually, along the top... I would say that adherents of this opinion are in the minority. Still, the classic microjig spinning rod is fast with a glued tip.

spinning test I said that microjigging involves using a weight range from 1 to 5g. Well, let's add a couple of grams to the bait. In general, no more than 6-8g. So, in microjig, spinning rods with the following test ranges can be used: 0-3g (rather, a nanojig version), 0-5g, 0.5-5g, 1-7g, 1-10g, 2-10g, 2-12g. Like that. Up to 10-12g for the top dough, with some margin. It is clear that if you work only in the lower segment of the scale, using weights of 1-3g, sometimes 4g, a 0-5g test is better. If you work in the upper segment, with weights of 4-5, 6g, then 2-10g, 2-12g are better. Using universal tests, for normal operation in the entire range, you should take rods with a test of 1-7g, 1-8g. Like that.

The line test is quite important for fine microjigging rods. This parameter does not affect the choice of the spinning rod itself. Before purchasing, the fisherman should focus on the previous parameter - the lure weight test. But you need to know the fishing line test in order to choose the right cord for the spinning rod. Using a “thread” that exceeds the upper line test is fraught with damage to the spinning rod if you do not work properly with the clutch.

The weight of a microjig rod should be light. The light weights of the baits this tackle works with, thin fishing lines, light small reels – oblige the rod to match. A good microjig spinning rod rarely weighs more than 120-130g. For many models this value is about 80-90g.

Top type , as mentioned above, it is better to choose S – solid. The solid soft glued tip works like a nod and perfectly shows all the movements of the bait, while bites, in most cases, are not only visible from the tip, but are also given to the hand through the sensitive form. You can also use spinning rods with regular tubular tips, especially on the upper weight range of the microjig range (4-6g). But, this is all an individual matter. You need to try both, choose the concept that suits you.

The type of handle for microjigging rods, I would say, is preferably spaced. This handle is lighter and gives better sensitivity. Long handles are not necessary. Between cork and neoprene, again, it’s a matter of habit and taste. I would prefer neoprene. In my opinion, it fits better in the hand and does not slip, even when wet.

Guide rings in microjig must be of the highest quality and minimum weight. Today, the best rings are Fuji rings with titanium frames and solid aluminum oxide inserts. A larger number of pass rings gives better sensitivity and better load distribution over the form. But the more rings, the worse the range of the tackle due to increased friction of the fishing line in the rings. Also, the smaller the diameter of the rings, the lower the casting distance. To cast normally with spinning rods equipped with a fair number of small rings, you need to use slippery thin, perfectly round cords.

Power is a relative concept. Well, of course, you should prefer more powerful rods, with a reinforced butt part. On a microjig, no, no, but big fish bite! And it’s much better and more reliable to cope with it if the rod has some power and a margin of safety.

* * *

If we talk about my microjigging spinning rod, then I am a fairly conservative character - I don’t change sticks like socks. I know spinners who take a couple of spinning rods of the same class, after fishing for a couple of months, change, sell, buy other models. I buy one spinning rod I like in a specific class, and if I like it, copes with the tasks and delivers proper aesthetic pleasure from the fishing process, I don’t change it until I break it or it becomes obsolete.

At the moment, I use an Aiko Margarita II spinning rod for microjigging. Model - 180UL S. Length 1.8m - because I fish with it in small bodies of water, often among bushes, in very cramped conditions. The 0.5-5g test just covers the range of weights that I usually use: 1.5-4g, sometimes 5g. The rod is quite forward and very sensitive. The handle is short, spaced apart, and very comfortable. Good reel seat. Quality Fuji rings. The rod is very light, elegant, but quite powerful; it has shown itself more than once when biting fish that are not microjigs.

Also, this spinning rod can be considered an ultralight all-rounder. With it, I successfully use not only small jig baits, but also small spinners, micro-oscillators, and small wobblers. In terms of price - middle class, or the upper end of the budget range, about $140-160.

* * *

I did not set out to consider here specific models of spinning rods for microjig. There is a great variety of them on the market today, both in the relatively budget segment, and in the middle, and in the elite. A description of even the most common models is material for a separate extensive article. Perhaps someday I will write something like this. In the meantime, be guided by the parameters described above and personal feelings. Whatever fits your hand and fits your wallet.

Share with your friends:

Categories: Tackle · Tags: Microjig, Tackle, Spinning, Rod