Catching carp with boilies: types of boilies, equipment, installation

How to plant boilies

1. Take a piece of fishing line (about 30 cm long) and tie a loop at one end.
2. Use a special needle to pick up the loop you have made and place the boilie on the leash.
3. After this, a stopper is inserted into the loop to secure the bait.
4. Next, holding the boilie between your thumb and forefinger, begin winding the line around the shank of the hook.
5. After making 7-8 turns, you need to pass the end of the fishing line through the eye of the hook.
6. By tightening the knot, you can attach the leash to the main fishing line.

Carp for boilies. Features of installation of hair equipment

To install such equipment, you will need special tools that you cannot do without. This:

• Special material for carp leash
• Plastic stoppers
• Needle tool (can be bought at a fishing store)
• Rubber tubes (available at the fishing store)

This is what is needed directly for installation, which you cannot do without, and of course everything else that any fisherman should have: hooks, swivels, sinkers. You'll find out everything along the way.

The process of installing hair equipment:

Hair rig for catching carp with boilies

• At the end of a 20 centimeter piece of leading material we form a loop, a knot with three turns and cut off the excess
• We cut off a piece of silicone tube 2 mm long and, using a broach, pull it onto the driving material
• We thread the other end of the leash into the ring of the hook towards the sting
• We make 6 turns of the driving material around the forend, the free end is pulled through the ring, again pointing it towards the sting
• Glue a knot of leader material around the shank of the hook and let the glue dry
• In a couple of minutes the hair rig is ready

Next, the free end is attached to the weight and the main line using swivels. You will now see a video of how this is done, everything will become clear to you...

Dusting boilies for carp

Boilies of this type are not subject to heat treatment. Dust boilies for carp are made without the use of eggs (the place of the binding component is taken by syrups, honey, molasses) and are simply dried. After the bait gets into the water, it begins to gradually dissolve, shedding one layer after another. If high-quality attractive components are added to the bait, such boilies will immediately attract the attention of carp swimming nearby.

The principle of operation of the hair rig when fishing for carp with boilies

Hair rig, carp anglers call the type of rig that allows you to catch carp with boilies. The fact is that boilies are not hooked due to their large size.

This is what the finished hair rig installation looks like.

Hair rig for carp fishing

How then do anglers hook fish?

It's very simple... The carp does not pluck the food it feeds on, but pulls it into its mouth. Those. he retracts the boilies along with the hook.

But the carp is a very smart and careful fish; after the boilies reach its row of teeth, which are practically in the throat, the carp feels the tension and resistance of the gear and immediately tries to spit out the bait. When he does this, the hook gets caught on the lower lip due to the resistance of the sinker which tightens the rig.

This is how carp fishing with boilies works. This is a purely classic type of equipment from professional carp fishing.

It is used very widely and effectively by all carp anglers.

Hooks for catching carp with boilies

The size of the hooks may vary, depending on the size of the boilies and the desired catch. When choosing hooks, you need to pay attention to the strength and sharpness of the products.

In most cases, carp are hooked on their own, and therefore the fleshy jaw breaks through not after a strong hook, but under the weight of the fish itself. That is why the hook must be very sharp and reliable.

The best option is forged hooks with a short shank. Ideally, the distance from the shank of the hook to its sting should be approximately 1/3 or 1/2 the size of the boilie.

Preparing boilies for carp fishing

Making balls of the required size, color and taste will not be difficult. Fishermen who are familiar with the taste of fish in a pond can easily make boilies from time to time.
Recipe tested by carp fishing enthusiasts:

1. A glass of milk powder is mixed with two glasses of semolina.
2. Add a glass of soybean and corn flour each and mix everything well.
3. Three tablespoons of vegetable oil, ten eggs, some shock absorbers and one teaspoon of dye are added to the resulting mixture.
4. Everything is mixed until smooth, and balls are made.

Depending on the type of boilies needed for fishing, the balls are frozen, boiled or cooked in the microwave. The boiled balls are dried for several days.

Color of boilies for carp

It is still not known for sure whether the color of the boilie really matters. Be that as it may, for bottom fishing in reservoirs with a clean bottom, it is recommended to use light-colored baits.

In the middle layers of water they fish with red, orange, yellowish boilies, which, according to legend, can attract the attention of carp not only with their smell, but also with their appearance.

For bait, boilies similar to those used directly as bait are used, that is, the colors, sizes and, above all, smells of the baits must be the same.

Types of boilies for carp fishing

The choice of bait type depends on the composition and topography of the bottom of the reservoir.

Types of boilers based on buoyancy:

1. Dust balls dissolve ten minutes after entering the water and begin to generate dust. They are used during fishing to form a “cloud” in the water, which serves as bait.
2. Soluble baits fall to the bottom and dissolve there.
3. Neutral boilies for carp fishing hang above the bottom.
4. Floating balls float above the bottom as much as the leash allows. They are made using a microwave oven. The resulting boilies for fishing should be fluffy and light.
5. Sinking bait just lies on the bottom. It is used for fishing in reservoirs with a clean bottom and lies there until the carp becomes interested in it. Therefore, during preparation, such boilies are first boiled for a long time and then frozen.

Installation of the boilie

The standard rig for catching carp with boilies is a hair rig.

With its help, the bait is securely attached to the hook, while at the same time not alerting the fish in any way. The design also contains a special silicone stopper, which prevents the bait from falling off and does not allow the fish to simply pull it off the hook.

Installation of hair equipment looks like this:

1. A loop is made at the end of the leash and a knot is knitted with 3 turns
2. A piece of silicone tube is put on the leash
3. The tip of the leader is threaded through the ring of the hook
4. Several turns are made around the forend
5. Next, the tip of the leash is pulled through the ring of the hook
6. The leash material is glued to the fore-end

The boilie is mounted as follows - a hole is made in it with a needle, through which a loop of hair is threaded, and a stopper is inserted into it.

In fact, this is the simplest way to install a boilie for carp fishing. But you should pay attention to these things:

• The leash should pass through the ring of the hook from the inside of the bend
• The winding should pass from the opposite direction from the bend of the ring

Reverse kick installation

Its feature will be a small metal ring that moves freely along the shank of the hook. In this case, the line for the boilie is passed through the usual ring of the hook, then passes through the ring on the fore-end and is tied to it.

With this method of installation, the hooked carp, trying to free itself from the hook with bait, is caught even more strongly.

Multi rig

The leash is mounted to the hook using a loop, and the boilie moves along this loop. When the carp tries to free itself from the bait, the boilie moves in the opposite direction.

If you catch small carp using small-sized boilies, then such bait can be placed on the hook itself, covering the sting.

Fishing Features

The key to successful carp fishing with boilies is a good knowledge of the features of the reservoir and bottom topography.

1. In areas of the reservoir with a hard bottom, you should use sinking boilies, which the fish will collect from the bottom.
2. Floating ones are more effective in silty areas of the reservoir; located in the upper layers, they will be clearly visible to fish.
3. For bait and bait, dusty boilies are actively used, creating a fragrant trail that attracts carp from long distances.
4. In areas with a current, you can combine sinking and dusting boilies.
5. In places with a lot of aquatic vegetation, combinations of floating options and suspenders work successfully.

Catching wild carp with boilies.

For a long time, boilies have been considered the main bait in catching seasoned carp. There are anglers who are skeptical about them and argue their skepticism by the fact that for carp, and for fish in general, boilies are an unnatural bait and the fish should be accustomed to them. But based on my experience, I can say that this is not so. Let me get ahead of myself, two days are enough to accustom the carp to boilies and then continue successful fishing. Yes, you should feed the fish generously using boilies and pellets and success is guaranteed. Carp usually like to try new bait. The fish like this bait, and it gets used to it very quickly, and based on this, a successful bite and a good mood for the fisherman are guaranteed.

What is the secret to the effectiveness of catching carp with boilies?

Boyle is a very concentrated food for fish such as carp. The trick is that carp have a particularly well-developed sense of smell, therefore, by applying different flavors to boilies, there is a chance to conquer the taste qualities of the most picky carp. One of the features of the boilie is its solid structure. Comparing the boilie with cake, which after a couple of hours gets wet and becomes loose, the boilie retains its shape for about a day. Due to its composition, when it gets into the water, it becomes like rubber and small fish cannot tear off particles from it. It is very important to pay attention to the boilie manufacturer and composition. High-quality boilies cannot be made from semolina and unpleasant flavoring. The next feature of catching wild carp with boilies is its composition, namely that the carp does not get enough of it and is therefore ready to eat it for days. He doesn’t get tired of this type of feeding, which is the key to a good bite when catching wild carp with boilies.

More specifically about the structure of the boilie.

The boilie is a round ball, painted in bright color, with a diameter of 13-34 mm. For bait, boilies up to 20 mm in diameter are used, and larger ones for complementary feeding. Not the least important factor in the effectiveness of boilie fishing is color. The color should stand out at the bottom of the reservoir, thereby luring fish. After all, when feeding the fish with corn, the fisherman’s goal is not to feed the fish, but to create a bright spot on a darkened bottom. But still, the role of smell is much more important than color; the fish’s sense of smell is much better developed than vision. The composition of all boilies is based on semolina, soy dough, seeds, ground hemp and, sometimes, fishmeal. Having such a composition, the boilie retains a stable smell and taste for a long time.

A few words about the manufacturer.

Basically, fishermen prefer boilies made in England. The British strictly adhere to the technology of preparing and rolling boilies. There is an opinion that very fastidious and intelligent carp live in English reservoirs and therefore the British make every effort to produce the highest quality boilies. But there are also good reviews about boilies made in France. In addition to boilies, which you, like all basic fishing gear, can buy on the website https://hfostore.com/rybalka.html, when going fishing, you should take with you a positive attitude, true friends and a good mood - catching wild carp on boilies will take you to the world of catching the most trophy specimens. Happy biting!

More articles about fishing for carp and carp: Floating boilies. Cooking at home. Carp. Catching carp. Catching big carp, carp. Adviсe. When the carp doesn't bite. Catching carp with corn.

Cooking boilies

You can make boilies for carp yourself at home. The standard set of components usually includes:

• Corn flour
• Semolina
• Chicken eggs
• Attractant
• Food coloring
• Possible adhesive elements - starch, gelatin

The flour is formed into a dough, into which eggs are added, after which some water is added to give the dough the desired consistency. You can add a little salt. The dough is mixed again, after which an attractant is added.

The next stage is the formation of boilies of the required volume. Then they are allowed to dry. After drying, proceed to cooking. To do this, the boilies are immersed in boiling water for a while. Depending on whether you need sinking or floating boilies, the cooking time will differ.

If you keep them in boiling water for more than 1.5-2 minutes, you will end up drowning. Less than a minute - floating. After cooking, the bait is dried and painted.

Here are some more recipes for carp boilies using the same cooking principle.

Recipe 1

• 250 grams each of wheat and fish flour
• 150 grams of cake and rye bran
• 5-6 chicken eggs
• 100 grams of milk powder
• 50 grams of salt

Recipe 2

• 200 grams of feed and soy flour
• 50 grams potato flour and starch
• 20 grams of peanuts
• 20 grams of salt

Recipe 3

Another easy way to make boilies from bread:

1. Take two pieces of bread crumb and roll them out separately to a thickness of 2-3 mm
2. One of the pieces is spread with jam or fruit syrup
3. Another piece is placed on top of it and rolled out
4. The resulting sheet is cut into pieces, which are crumpled and rolled into balls.

Tackle and equipment

There is no special equipment for catching carp with boilies - this attachment can be used when fishing with a float rod, with a donk and with a feeder. The selection of gear depends on the expected size of the prey.

For example, for feeder fishing, special reinforced carp rods are used, equipped with power reels with a baitrunner. Braided line is used as fishing line. The feeder is most often used for trophy fishing. The complete setup will look like this:

• Rod up to 4 meters long and weight up to 100 grams
• Reel with baitrunner, size 3500-4000
• Braid, diameter 0.22-0.24 mm
• Leash, thickness 0.14-0.16 mm and length 30-35 cm

For small and medium-sized carp, use a float rod with a weight of up to 30 grams. Equipped with a 2500-3000 reel with mono line, 0.2-0.25 mm in diameter, a float, and a load of up to 5 grams. Several shotgun weights and a leader with a hook complete the rig.