Techniques for catching perch with spinners and choosing a location

Among predator baits, the spinner has a number of unique advantages. The fact is that any predatory fish has excellently developed senses of motion perception. A standard spinner with rigidly attached hooks creates a modest game with both slow and fast retrieves. In reservoirs where there are few fish or where they are cautious, this may not be enough. Popular among spinners, catching perch with a spinner arose when the blade of the spinner was disconnected from the hooks and allowed to rotate freely while moving.

Types of spinners for catching perch

In the classic version, this bait is equipped with one petal. There are three main forms of metal plate:

1. Aglia . It has a round petal that tends to open at a large angle and creates strong resistance during wiring. As the speed of movement increases, the spoon is pushed closer to the surface. Aglia is often used when fishing in snags or in places with dense deep vegetation. Deflection of the spoon from the main axis by 50–70 degrees helps prevent small grass from snagging.
2. Long . The petal resembles a willow leaf, which is why its resistance in water is insignificant. A spoon at an acute angle (25–35 degrees) often tends to press against the axis of the bait. Fishermen use Long for fishing the bottom or in places with strong currents.
3. Comet . The most universal form of turntables. The oval silhouette of the petal allows you to make drawings at different depths. The spinner has average (between Long and Aglia) indicators in terms of width and angle of deviation from the axis.

Some manufacturers use tricks to increase the attention of a predator:

• Holes are drilled in the petals. This gives the lure additional swirls.
• Rattle installation. These lures are chosen during active perch feeding.
• Increasing the number of petals - additional vibrations and noise are created in the water.
• Bright plumage is mounted on the tees - this creates an additional irritant for the perch sitting in ambush at the bottom of the reservoir.

Requirements

Small spinners are used to catch perch. According to the Mepps classification, models from sizes “00” to “2” are suitable for the striped robber. Larger turntables should not be written off. They are relevant when there is a high probability of a bite from a heavy humpback salmon, but you need to effectively cut off the small things.

Perch loves small spinners.

In addition to size, the most catchy spinners for perch must meet the following requirements:

• stable rotation of the petal, without failures or sticking;
• confident work within a given horizon;
• the ability to carry out wiring at different speeds.

The color of a spinner bait for perch depends on the lighting, weather, time of year and the specific behavior of the predator in a particular body of water. As a rule, it is not enough for an angler to have one or two colors. The optimal color scheme within one model is the presence of the following colors:

• black (the most versatile);
• "gold";
• "copper";
• acid tones;
• "silver" with red stripes.

The presence of an edge on the hook is optional. You should have both options in your arsenal. The fly on the tee acts as a stabilizer for the bait and a point of attack. However, there are situations when the “feathering” of the spoon scares away the perch, especially when fishing in crowded reservoirs.

What to look for when choosing

When preparing to catch perch with spinners, there are several factors to consider:

• Petal size. As a rule, it is indicated on the packaging. For small and medium-sized perch, baits numbered from 0 to 3 are suitable. The thickness of the fishing line is selected after choosing the main bait.
• Lure color. Color mismatch can seriously ruin your holiday on the water. In sunny weather and during daylight hours, as well as in clear water, it is important to use spinners in dark tones and colors (red, green, blue, etc.). Without a pattern, we can choose matte brass lures. At dusk, in cloudy weather or in a muddy pond, on the contrary, it is better to install baits that give glare: silver, golden. In your arsenal, it is also advisable to have spinners with bright contrasting spots or stripes (orange on black, red on white, etc.) - the predator sometimes reacts to them more aggressively.
• Rod strength. Test numbers are indicated on each spinning rod and the weight of the bait must correspond to it. Too light spinners on forms with a fast action will not allow the fisherman to sense the moment of attack in a timely manner. Too heavy lures, on the contrary, bend the rod during retrieving and often lead to predators being cut off.
• Cord thickness. There is no point in tying a thick fishing line on a small spinner, just as there is no point in hanging a cord that is too thin when catching a large predator. The ratio of the sizes of the spinning equipment should be optimal. So for the third number it is enough to set the fishing line from 0.18 to 0.2, depending on the activity of the fish and possible snags on the grass. The braid may have a smaller diameter (for example, 0.1). A non-flexible cord better transfers the perch bite to the rod handle.
• Place where you will fish: type of reservoir, presence of vegetation, water purity, ease of fishing from the shore or from a boat.
• Weight of trophies in fishing areas, reviews from fishermen. When preparing gear, it is advisable to select bait based on the prospects of catching a predator of a certain size.

What is a spinner: advantages and disadvantages

Fishing for perch on a spinner is a little more than excellent for beginners. Perch itself is already a fish that is clearly for complete beginners, so to speak. It is found almost everywhere possible, with the exception of several regions of the country, and in closed paid reservoirs.

The redfin robber is often perceived as a rather trashy fish, which can simply eat all the young of expensive species, whose populations the owners of paid ponds intended for quiet fishing and camping are trying to cultivate.

The rotating spoon, just like the perch, is literally sharpened by the hand of “fresh blood”. And the point is not even that it has a remarkable ability to bypass any difficulties in the form of snags on snags and grass, but also that this spoon behaves attractively for most of the predators that inhabit the rivers and lakes of the Immense.

The key to a pinwheel's success is its petal. The core, around which all this fishing excitement happens, begins right from the moment the tackle hits the water. Thanks to its special structure, it behaves in an attractive manner for most representatives of the kingdom of ray-finned fish, which includes our favorite red-finned, spotted “Iroquois”.

Techniques and tactics for fishing with a spinner for perch

To catch perch at depth with a spinner spoon, Long or Comet-shaped petals are often used. After casting, the spoon should sink to the bottom and only then is it slowly brought to the speed of opening the petal. If there are no bites, the speed of the bait should be gradually increased. At a depth of three meters or more, it is advisable to catch perch with spinners with a larger load.

When fishing the surface layer and overgrown areas, small spinners without shipping with Aglia or Comet petals are used. Wiring becomes “easier” and faster. By the way, in the grass it is difficult to count on trophy specimens, so here it is appropriate to use bait no higher than number three.

If after several dozen casts there is not a single bite, perhaps the flock is located away from the casting site. In this case, it is necessary to use area fishing tactics:

• "Fan" casts. The wiring pattern will look like rays emanating from one point.
• "Net". The spinner, moving along the shore, fishes areas of water at an angle of 45 degrees to his right and left. The wiring pattern is similar to a fishing net.

It often happens that the activity of perch can change dramatically on different days. There are many reasons: overfeeding of the predator, a pressure shift, a drop in water temperature during the day, the school moving to another place, etc. We recommend having spoons of different sizes . The smaller the spinner, the greater the chance of a catch. If there are enough fish in the reservoir, the likelihood of catching a trophy striper increases. To cut off small predators, we recommend increasing the size of the bait.

On active fishing days, perch bites often alternate with pike attacks. This is true when using large turntables. In order not to lose an expensive lure, we recommend installing metal leashes.

On narrow rivers, ditches or casting bait along the shore, experienced spinners recommend starting with short runs along the shore at an acute angle.

Features of using spinners for perch: pros and cons

The undoubted advantages of rotating spinners or spinners are:

• simple design that allows you to repair the spinner yourself;
• ensuring excellent perch bite at almost any time of the year;
• large selection of spinners;
• a wide price range of spinners, allowing you to choose a bait for almost every fisherman;
• affordable prices even for high-quality foreign models;
• the ability to make your own baits;
• ease of use, accessible even to beginners.

Pinwheels are suitable for fishing at any time of the year; it is preferable to use them in spring and summer ; in winter and autumn, lures with a smell are better suited.

Pinwheels with a wide blade are better suited for fishing in quiet bodies of water, while those with a classic blade are better suited for fishing in livelier areas of ponds, lakes and rivers.

Selecting a location

Catching perch with a spinner spoon in open water is characterized by searching for traditional places where the predator gathers at depth. Usually it stands on dumps near river beds or near bottom holes. As a rule, you can also catch another large predator there, for example, pike perch or asp.

In shallow water or in small lakes, small and medium-sized perch often bite. Just like the medium-sized pike, the striped one likes to set up ambushes in thickets, snags, or near artificial “reefs” made from human waste (sunken tires, concrete blocks, etc.).

If the place is unfamiliar to you, before casting an expensive spinner, we advise you to conduct reconnaissance with used baits or cheap jig heads. This way you can quickly find safe areas.

A sign that indicates the presence of a perch is the activity of fry jumping out of the reservoir in schools. If the surface is quiet, shallow water along reeds or grass thickets is first fished. Passages in the reeds or “windows” of open water in dense thickets may be promising. In these places there is no need for long casts - the predator can stand almost underfoot.

Wiring

After casting the bait, it is necessary to determine the optimal speed of its movement in the water. When the petal starts playing, the spinner is moved without sudden jerks. The speed of twist of the coil should allow the petal to fully fulfill its purpose - to create vibrations and attract a predator.

It is best to hold the rod at a slight angle to the surface of the reservoir. This eliminates accidental jerks with the tip of the blank, and in the event of a sharp bite from a large predator, the possibility of damage to the rod.

The best wiring option is to move the bait on the verge of falling. At this speed, even the most lethargic predator should be tempted to attack. If there are no bites, you need to increase the speed; perhaps the perch for some reason does not react to the slow bait.

Catching perch with a spinner: what shapes and colors of the petal to use

Fishing is carried out from spring to autumn, but summer is the most successful. It is at this time that spinners take out catchy spinners of different sizes and colors. Today, the most common and affordable spinners are representatives of spinners from the Meps company. The secret of their success is simple: catchability and price are the two main indicators that guide both professional and novice anglers.

We are not representatives of this company and this article is not purchased, but we consider it our duty to share our experience in this matter. Pinwheels are consumables, and losing them during fishing trips is nothing new. Perch, being a predator, tries to stick to standard places in the pond. One of the favorite habitats are snags, thickets of grass, water lilies, stumps, old supports and other places where fish can hide in ambush or feel safe.

You should look for striped fish in such places, but at this moment the likelihood of a blind hook increases, where it will no longer be possible to pull the bait ashore. In the case of fishing from a boat, this problem can be solved in favor of the fisherman if he carries a cutter with him. But when fishing from the shore, the chances disappear before our eyes. Therefore, you should treat your gear with care, but be aware that you can lose it at any moment. This is where you should remember the cost of the bait.

Meps spinners are sold in the price range from 100-200 rubles, while having excellent performance in catching perch and pike. An ideal option for snags and overgrown places where using an expensive wobbler or popper is impractical. The size of the bait affects the catch only indirectly. Perch is a greedy fish, sometimes attacking prey of its own size. It is necessary to have a range of sizes and colors in your arsenal, changing the spinners depending on the weather, fishing conditions or the mood of the fish.

It is worth adhering to simple rules: in clear, bright weather, in the morning or evening, put darker colors (copper, brass). In cloudy or dark times, equip your spinning rod with a lighter lure (silver, nickel) or brighter. The same goes for water. If there has been a recent rainfall and the shallow river has become muddy, or the snow has recently melted, start fishing with light-colored baits.

In clean water, give preference to dark colors. You should not take these tips as an unshakable truth; try changing colors and shapes at your discretion if there is no bite. On bright, sunny days, do not mount bright turntables due to excessively reflected rays. Unnatural shine or excessive visibility can scare off not only perch, but also any other predator. If there is no bite, then feel free to change the color, weight or size of the bait.

It is worth mentioning that perch readily responds to flies and attack points both on the petals of the spoon and on the axis of the attachment of the petal. For example, Mepps spinners often use the following techniques: the petal has a sticker with bright spots that motivate the predator to attack. The same applies to tied flies (multi-colored tails on the tee), which act as an irritant. A bead sometimes plays several roles: attracting attention or a point of attack for a predator.

Wobblers that catch 100%:

Shimano FX

More details

Shimano FX

More details

Shimano FX

More details

Shimano FX

More details

Pinwheel petals are divided into several types and the type is selected depending on the fishing conditions:

• Elongated petal of the “Long” shape. Rotates at an angle of 30 degrees relative to the spinner rod. It is used in the current to fish the bottom layer. Low rotation speed and minimal drag performs well at slow speeds.
• The oval shape, or “Comet” as it is called, is the most versatile of all turntables from any manufacturer. The rotation angle of 45 degrees allows use both in current and in still water, with fast or slow retrieve.
• If you see that the petal is wide and close to round in shape, then this means “Aglia”. It rotates at an angle of 60 degrees and is used to fish the upper layers of a reservoir, this is especially true in overgrown places in standing water. By creating serious vibrations it can lure out not only a lurking perch, but also a larger predator.

Separately, we will say that in some models of rotating spoons, holes are drilled on the body of the petal. They were created with the aim of creating not only vibrations in the water, but also noise - an additional irritant for the predator. It remains to be said about the tees and the type of wiring. The hooks must be of high quality and sharp; if this condition is met, the number of bites realized will be greater and the number of bites will be reduced. This type of spinner is good because it does not require serious skills in wiring methods.

You can spin the reel slowly and the spinner will do everything for you. Last few tips for new anglers. Before purchasing any gear and bait, look at the spinning rod, where the test will be indicated. Using lures of less weight will lead to loss of sensitivity during wiring. More weight puts unnecessary strain on the rod and increases the chances of the pole breaking.

When using monofilament fishing line, do not use a “rope”; a sufficient diameter will be 0.18 mm; braid is allowed in a size of 0.1 mm. The size of the spinner for perch is selected up to No. 3. The third number is universal, showing itself perfectly when fishing for small striped robbers, as well as for larger pike. Nos. 0-2 are considered classics.