FLAGSHIP DK. EVOLUTION OF FLAGSHIP boats.

PVC motor boat Flagman 280L

Having deciphered the abbreviation of the name and looked at the passport with the specified technical characteristics, it is easy to guess that the Flagman 280L boat has a length of 2.8 meters, a width of 1.5 and weighs only 20 kilograms.

The boat is equipped with three inflatable cylinders with a diameter of 46 cm; it is worth noting that they have a maximum pressure threshold, which should not exceed 280 mbar. The basic package includes several nice and useful accessories, namely:

• built-in transom;
• handles for transportation;
• oarlocks.

The boat is capable of lifting a load of up to 220 kg. The boat is made for a motor whose maximum power should not exceed 6 horsepower; the SEA PRO MOTOR is perfect for this. The average price at the time of writing is about 25,000 rubles.

Apple iPhone 11 Pro Max 256GB

The most flagship flagship from Apple at the time of writing.

Formally, this is a new generation, but the design clearly resembles the Xs model, and the diagonal of the screen along with the wide cutout has not changed.

But inside is the new Apple A13 Bionic chipset, which has already been called the most powerful in the world of smartphones, coupled with proprietary optimization, ensuring very high system speed. A new triple camera has been installed with a wide-angle and ultra-wide-angle module, as well as a telephoto lens (there is a night mode).

Traditionally, Apple has support for fast and wireless charging, Face ID, and IP68 water protection.

• Screen diagonal: 6.5 inches

• Screen resolution: 2688×1242

• Weight: 226 g

• Number of SIM cards: 2 (nano SIM + eSIM)

• Processor: Apple A13 Bionic

• Memory capacity: 256 GB

• RAM capacity: 4 GB

• Battery capacity: 3500 mAh

• Rear camera: triple 12/12/12 MP

• Front camera: 12 MP

• Memory card support: no

Characteristics of the PVC boat Flagman 300NT

The 300NT model does not provide for the installation of a motor, which significantly reduces its cost. Only 2 people can fish on it at the same time, and the fishing will be comfortable and they will not interfere with each other.

Now about the dimensions, the length of the boat is 3 meters and the width is 1.5, it is capable of lifting loads weighing up to 220 kg.

The design of the boat provides for the presence of two independent cylinders, each of which is 40 cm in diameter. But that's not all, the boat has an inflatable keel bottom, which some consider as a third tank. If you lower the boat, it will weigh only 17.5 kg. And the price for it does not exceed 23 thousand rubles, by the way this is the average price for PVC Flagman boats.

FLAGSHIP DK. EVOLUTION OF FLAGSHIP boats.

EVOLUTION OF FLAGSHIP boats.

It has special meaning for us.

We believe that without continuous improvement there will be no success.

The time has come to show how our actions correspond to our ideological values.

We are pleased to present the latest development of our company - a double-hulled vessel with a bottom of various modifications.

The double-hulled vessel is a unique development, unlike any inflatable structure known in small shipbuilding. Proof of this fact is the issuance by the Federal Service for Intellectual Property of a patent for an INVENTION and six patents for utility models.

A double-hull small vessel consists of a U-shaped upper inflatable hull and a second lower inflatable hull forming a bottom shape, for example, flat, keeled, catamaran, trimaran, channel.

Unlike known designs of inflatable small boats, in a double-hulled small boat, the U-shaped inflatable upper body and the lower body are connected to each other along the perimeter along the line of coincidence of the contact points (connection line). The upper hull, at the entire inflatable height, serves as the sides of the vessel and forms the cockpit area, and the lower hull forms the plane of the vessel’s deck and the contours of the bottom.

An important thing in the production technology is that the bottom is not built into the cylinder, but is attached (glued or welded) from below. The novelty of the proposed design lies in the fact that a double-hulled inflatable vessel opens up the possibility of designing more technologically advanced bottom contours, since the designer can fully implement the plan. Having a single bottom area, which is not cut off by cylinders, as in well-known inflatable vessels, there is no space limitation for the formation of different bottom contours with the installation of different shapes of partitions in the lower part of the inflatable body.

Here are some examples:

The inflatable keel bottom in double-hulled vessels can match the outer width of the vessel. In this design, you can easily form any bottom contours that are inherent in the classic contours of rigid small vessels, of course, adjusted for the features of inflatable stressed shells. This is the so-called gull wing and longboat type bottom and many other types of contours. At the same time, the bottom area allows you to install redans that will operate in the planned range.

At the same time, there is another very important difference from the known NDND designs, which is inherent in all double-hull boats, these are cylinders. In a double-hulled vessel, the cylinder can be limited by the minimum diameter required to install the cans in the cockpit. As a rule, for convenience, cans are installed at a height of 400 mm from the deck; accordingly, the cylinder can have a diameter of at least 400 mm. At the same time, the external dimensions of the boat remain recognizable, for example 1800 mm. The width of the cockpit increases and becomes 900 -1000 mm. In known designs of inflatable boats, the width of the boat cockpit is approximately 800-840 mm. Since the cones of the cylinders in a double-hulled vessel do not play any role, they are always located above the waterline of the vessel, it is possible to get rid of them altogether and produce cylinders with an end cap. This results in an increase in usable cockpit length. With a bottom width of 1700 mm, the stability of the boat is unique, and the lateral roll in turns is insignificant.

Double-hulled vessels have the unique ability to create a water tunnel for a water-jet engine. It is possible to create a sufficiently deep tunnel in the lower body without compromising its hydrodynamic properties. With a sufficient width of the lower tunnel housing, it is possible to create compensation for the support necessary for movement as with a motor under a propeller or a water cannon.

Double-hulled catamaran-type vessels do not require separate attachment of skegs, since they are designed by creating a lower hull in a single stressed shell.

This makes it possible to produce inexpensive catamarans and trimarans of small sizes 300, 320, 330, 350.

All boats have two drain holes on the transom. This became possible thanks to the sufficient thickness of the lower body.

A deep cockpit with a large area, a universal lower hull, the usual weight of NDND boats, low cost, excellent seaworthiness, and speed characteristics - these are the arguments that give hope that double-hulled vessels will win the interest of our clients.

Technical characteristics of the boat Flagman 320

The Flagman 320 boat belongs to the new generation of boats. It was developed and produced using modern technologies and materials. The main features of the boat include the following indicators:

• has a high maximum speed;
• equipped with large diameter cylinders (which increases stability);
• has very good driving characteristics;
• the boat is equipped with a Fast Sliding plate;
• there is steering;
• bottom with keel;
• relatively high sides, which allow the boat to easily overcome waves of up to 70 centimeters.

Rubber boat "Flagman 320"

“Flagship 320” is a striking example of a combination of compactness and significant design. This boat from the “adult” motor series has a small keeled bottom, as well as the lowest weight in its category. This is an intermediate option between compact vessels for small bodies of water and seaworthy boats, and has an affordable price. The PVC boat “Flagman 320” can be equipped with a motor with a maximum power of 10 hp. With.

Rubber boat "Flagman 320"

Easy to assemble

Some of the variations of the “320th Flagship” with an inflatable bottom are characterized by the particular ease of assembly and disassembly of the device. These include the L model, which is ideal for a one-day trip on the water for a fisherman or tourist.

Standard equipment

The standard set of equipment for this model of vessel includes:

• two collapsible oars;
• safety ropes;
• two hard cans;
• foot pump 5 liters;
• repair kit;
• tape handles;
• fabric envelope bag.

Dimensions "Flagship 320":

• cockpit length – 2.2 meters;
• width – 0.62 m;
• maximum load capacity – 400 kg.

Existing modifications

In addition to the lightweight version “Flagman 320 L”, there are other modifications of this option, namely the PVC boat “Flagman 320 DK”. The boat of this model is a double-hull design, the bottom of which is made as a separate structure. Thanks to this solution, a large useful length and width of the floating device are achieved. This main feature of the vessel is a unique development that sets it apart from the entire range of small inflatable devices.

Boat "Flagman 320" with an inflatable bottom

Advantages of the boat “Flagship DK 320”:

• large and deep cockpit allowing for comfortable landing;
• two drain valves for quick removal of water;
• high level of sustainability;
• slight tilt to one side when turning;
• speed capabilities;
• seaworthiness;
• ease of use;
• high-quality contours through a single bottom;
• Four inflatable compartments along with a high side guarantee safety.

Boat Flagman 330U

A design feature of the PVC boat Flagman 330U is the presence of three inflatable cylinders, each with a diameter of 46 cm. The length of the boat is 3.3 meters and the width is 1.5 meters. When inflated, it weighs only 27 kg.

The boat is three-seater, and its maximum carrying capacity is an impressive 400 kg. This boat is made for a motor whose maximum power can be up to 16 horses. In the basic configuration, the price of the boat is 32,000 rubles, which is quite a lot.

Inflatable motor-rowing pvc boat Flagman 320

Compact pvc motor-rowing boats Flagman 320 are suitable for hunting, fishing, tourism and active recreation in small reservoirs and rivers. The vessel is designed as a weekend boat for 3 passengers, is easy to assemble/disassemble, has a minimum weight of 26 kg, is compact and easy to transport. The production uses light and durable polyvinyl chloride fabric with a density of 850 g/m2. The built-in transom allows you to install an outboard motor up to 10 hp.

A low-keel low-pressure inflatable bottom (LPND) provides minimal draft, the ability to walk in shallow water, confidently maintain directional stability and absorb shock. An envelope is packed in one bag. The flagship 320 has a low keel, has excellent movement and glides without porpoising. The Flagman-320 has a lifting cable that allows you to move cans/equipment of the UKB type along the entire length of the mount and retains the ability to carry out weight distribution.

There is also a smoothly raised bow, a large 46cm cylinder diameter, a spacious wide cockpit, quality fittings, improved self-draining cockpit openings, reliable air valves, a safety rail, a wide safety tape and a reasonable cheap price. This model is very easy to buy, since production is located in Russia. City of manufacture: St. Petersburg.

You can buy or order an inflatable rowing boat in our retail or online store Tent-Peter. Fast delivery by courier in St. Petersburg. Sale and shipping of Flagman boats by any transport companies in all regions of Russia.

Flagship 350L technical specifications

I thought for a long time whether to include this boat in this review, but still decided to talk about it. The reason for concern was that it belongs to the line of catamarans, and is used mainly for walking on the water, although they also catch fish on it.

But we will talk about fishing from a 350L boat, it is designed for 4 passengers, but as practice shows, only two people can fish comfortably. If we compare driving performance, it can compete quite well with the 400U and 420 models, but more about them below.

Now about the technical characteristics:

• Length – 3.5 meters;
• Width – 1.64 meters;
• Load capacity – 500 kg;
• Quadruple;
• Engine power from 10 to 18 horsepower;
• Weight – 48 kilograms;
• Price – 35,000 – 41,000 rubles (depending on configuration).

Boat "Flagman 450"

The Flagship 450 vessel is designed for trips and trips with the whole family or a large group (up to 6 people with equipment), as well as for long walks on the water. The boat captivated many owners with its seemingly incompatible characteristics: speed and high level of safety. These benefits can be felt not only by one passenger, as in most other models, but by several at once. Depending on the engine power, the ship reaches the appropriate speed. Engine parameters can be improved by adjusting the angle of the motor or installing a sports/cargo propeller.

Dimensions

“Flagship 450” belongs to the “adult” series of small-sized vessels. This watercraft is characterized by large parameters, in particular, the diameter of the cylinders (520 mm). It maintains good buoyancy and other seaworthiness characteristics, while the weight of the Flagman 450 boat is 57 kg.

Design dimensions:

• maximum external length – 4.5 meters;
• internal – 3.26 m;
• load capacity – up to 900 kg;
• pressure in the boat compartments - 0.28 atmospheres;
• Cockpit width – 0.92 meters.

Boat "Flagman 450"

Behavior on the water

The vessel is moderately rigid in order to be stable on it. To improve technical characteristics there is a solid bottom. When lifted from the surface of the water in the stern, passengers are not splashed. The height of the sides in the cockpit (380 mm) provides protection for those in it from high waves.

PVC boat Flagman 380

An excellent five-seater fishing boat that can lift loads up to 500 kilograms. Its dimensions are also quite impressive, the length of the boat is 3.8 meters and the width is 1.77 m. The design provides 4 cylinders with a diameter of 48 cm, which are inflated independently of each other.

The material used for manufacturing was chosen to be traditional for the manufacturer – it is PVC fabric. The boat is made for an engine with a power of up to 20 horsepower, but on all forums fishermen do not recommend installing such powerful engines and shifting the bar to 15 horsepower. It costs approximately 45,000 rubles.

Huawei P40 Pro

Fresh flagship from Huawei. In general, the P40 line at the time of writing includes 4 models, and the top one is the P40 Pro.

Essentially, the evolution of the extremely successful P30 Pro, which is still considered one of the best smartphones of 2019-2020. So, here you will find a gorgeous 6.58-inch high-resolution AMOLED screen, an excellent camera with 4 modules, and the flagship HiSilicon Kirin chip 990 5G and 8 GB of RAM, 4200 mAh battery with fast and wireless charging, IP68 water protection.

As for the main camera, the company has primarily improved the quality of video recording. Don't forget that Google services are not yet available on this model.

• Screen diagonal: 6.58 inches

• Screen resolution: 2640×1200

• Weight: 209 g

• Number of SIM cards: 2

• Processor: HiSilicon Kirin 990 5G

• Memory capacity: 256 GB

• RAM capacity: 8 GB

• Battery capacity: 4200 mAh

• Rear camera: four modules 50/40/12 MP + 3D Depth

• Front camera: 32 MP

• Memory card support: yes

PVC boat Flagman 420 IGLA

The PVC boat Flagman 420 IGLA was created by manufacturers for fishermen who are faced with such difficult tasks as passing through small and narrow water channels, making a path through thickets of aquatic vegetation or reeds, and for those who need a lot of free space in the boat and who love comfort. This is what the manufacturers indicate on the official website.

PVC boats from the Flagship IGLA series differ from other models in their design, namely: their cylinders accommodate a smaller volume of air, and the bow cylinder is raised up and extended. Boats in this series are equipped with low-pressure inflatable bottoms. To pass through shallow places, the bottom has a medium deadrise; there are also boats with an almost flat bottom, called boats with a low deadrise.

The almost flat bottom of the boats guarantees high stability, and the Flagman boats also have a raised bow to make it easier to pass through waves. The narrow hull and high front cylinder give the boat an advantage when passing through thick aquatic vegetation or reeds while fishing.

During testing, the PVC boat Flagman 420 IGLA performed well in combination with engines from 5 to 25 hp, the maximum speed on such a motor was about 50 km/h. Well, you can row with oars, there are no problems here either, the boat is easy to control and it glides well on the water surface.

On the official website you can buy a boat for only 45 thousand rubles. Which is quite a bit for a motor boat with such parameters and a number of positive reviews among fishermen.

St. Petersburg PVC boat “Flagman 280”

The PFH boat “Flagman 280” is a small-sized inflatable vessel, which stands out from other motor boats by having a low-keel bottom, which guarantees directional stability both at oars and under the motor. The hard deck is quite solid and allows you to fish and hunt from a standing position. The design of the vessel allows the installation of an outboard engine. Which engine will be better for the Flagman 280? The manufacturer recommends installing a motor with a short deadwood with a power of up to 6 hp. With.

Frame

The entire structure of the basic modification of the vessel is made of PVC material with a density of 850 g/sq.m. In the Flagman NT boat model, this figure is 750-650 g/sq.m. The boat is equipped with a NDND, a rigid transom made of waterproof plywood. The body is represented by a horseshoe-shaped inflatable balloon with a diameter of 460 mm and a slightly raised bow. In addition, the boat is equipped with a Fast Sliding support plate, which allows the boat to plan without problems and glide through the water. The Flagship 280 HT provides its owner with comfort and safety through a fully inflatable design.

PVC boat “Flagman 280”

Advantages and disadvantages of the model

The PVC boat “Flagman 280” with an inflatable bottom has many advantages compared to other models, namely:

• the additional volume of air improves the buoyancy and carrying capacity of the vehicle,
• doesn't make noise
• ease of assembly/disassembly,
• reliability in emergency situations.

Among the shortcomings, some owners note the small cockpit space.