How to make a fishing sled with your own hands?

We make our own fishing sleds

The most important thing here is that the result of collecting all the necessary items and equipment does not turn into an unbearable bag, which will definitely ruin all the romance and anticipation of a successful fishing trip. It would be so, because it’s a bit heavy to carry a fishing backpack over fairly decent distances, but fisherman are often resourceful people, so lately you can increasingly see a fisherman with a sled. True, there is a nuance - those sleds that were safely taken from your beloved child will not fit. A fishing sled is also a means of transportation.

and a place to store and transport a backpack with all the necessary things. A box with equipment and catch can be safely placed there, and if necessary, you can sit on it and lie down (but don’t fall asleep, you can’t sleep in winter!).

The best solution for homemade sleds

There are purchased sleds, stores are literally littered with them, but many fishermen come to the conclusion that a do-it-yourself fishing sled is the best solution. Why? Yes, because every fisherman, when constructing such a simple but very functional device, takes into account his needs and desires, which is why sleds of various “fillings” are created. For some, they consist of only two compartments - for catch and equipment, for some this is not enough, and he arranges four sections in the sled. Everything in such sleds is provided for down to the smallest detail. What a pleasure it is to show off your masterpiece to other fishermen! Therefore, everyone tries, making their own sleds in the summer.

What time of year to make a sled?

In the summer, while no one at home is looking, we take the lower part of an old sled, drag it into the shed/garage, and, joyfully rubbing our hands, look for good light plywood. We begin measuring the box that will need to be placed on the sled. Carefully cut out all the parts, do not bend the plywood so that it is stronger. Then we attach the bottom of the box to the runners, but not with a hammer and nails, but with a drill and self-tapping screws. You’ve attached it, now give it a tug – is it holding tight? Hurray, congratulations! No, homemade sleds for winter fishing are not finished yet, as you already understand, everything is just beginning. Using the same self-tapping screws and drill, and also the corners, we form the walls of the box on the sled. Did you like the result? Are there any gaps? Fine. Let's continue. What kind of winter sled do you like - so that everything in it freezes and it is impossible to tear the sandwich off the bag if necessary? Or, after all, a warm option from which you won’t scoop out the catch, but carefully take it out?

Preparing a sled in the summer

If the latter, then take thin polystyrene foam and glue the walls. Next is the lid. I mean, the lid of the box should be strengthened, because you will not only look at the sled and slowly carry it, but, quite possibly, you will also want to sit down. So we make the lid from a stronger material than plywood. And since you want to sit on something warm and quite soft, then make a soft seat (the best option is foam rubber and leatherette), you can take a furniture stapler. If you don’t like plywood sleds, make or buy a plastic sled for winter fishing.

What is the best bait to use for a boat?

The main quality of boat bait is that it is alive. The choice of attachments is varied and original. For example, a dragonfly. It is unlikely that you will find at least one other tackle on which you can use such an attachment. Various large beetles, grasshoppers, butterflies, and crickets are also widely used as boat bait.

What does the boat rig consist of?

Firstly, this is the boat itself. Secondly, a section from the main fishing line that runs from the boat itself to the leashes. It’s good if you have a couple of ready-made segments in stock - 10 and 15 meters. Thirdly, a section from the main line with anti-twisters for 2-3 leashes. The distance between them should be about 3 meters. Fourth, don't forget about leashes. There can be a maximum of three. Stock up on hooks on a fishing line measuring 2 meters. Fifthly, this is the main line of your gear (0.4 mm). Sixthly, the basis of the tackle is the rod. It should be in the form of a spinning rod. Length - 3.5 meters. The rigidity of the rod and high-quality guides are also important. And finally, the reel. It must have a reverse lock.

How to fish with a boat

Fishing with a boat is very reminiscent of flying a familiar kite. First you need to throw the tackle into the water. Then pull the main line up to the leaders. At the same time, move along the shore upstream until the tackle takes the desired position in the water. Only after this are leashes with hooks attached. Next, rewind from 15 to 30 meters from the main line. Now you can start fishing with a boat. Please note that the fishing line must be at a certain angle in relation to the shore - about 60 degrees or a little more. To make it easier to change baits and catch small fish, you can use a simple technique. While holding the main line, lower the rod to the ground. Without letting go of the line, move downstream at an angle of 45 degrees until you reach the leads. After this, you easily remove the fish or change the bait and go in the opposite direction in the same order.

Subtleties of sled fishing

The advantage of the boat

The first method: release the bait in the direction of the current. The fishing line does not come into contact with the surface of the reservoir. The second method is suitable for fishing with artificial bait. The peculiarity is that such a nozzle must be constantly set in motion. Therefore, it is necessary to move up in the direction of the current. This will cause the bait to bounce and twitch on the surface. Also, do not forget about pauses and freely release the nozzle. The third method is also suitable for artificial bait. This technique worked well when catching chub. At the intended fishing location, it is necessary to lift the bait into the air at a distance of 20 centimeters from the surface of the water and spin it in the air. Continue this manipulation until the fish shows itself. And then sharply lower the nozzle into the water. Be prepared for the bite to be strong and sharp. The fourth method is ideal for live baits. When you feel a bite, you need to quickly put down the rod. Meanwhile, the leash goes in the direction of the fish’s movement. After a few seconds, you only need to make a hook, i.e. sharply pull the line upward.

Read further:

Methods of placing silicone baits for successful fishing for predators

Drop shot rig for perch fishing

Tackle for catching roach in winter and summer

Do-it-yourself sled for winter fishing: step-by-step instructions

There are also special sleds for fishing, which differ in many design options. Very often, fishermen use sleds with metal runners; they can have a folding or solid design. Sleds of this type are good for moving on ice, but on snow, especially when loaded, they do not perform so well.

Metal sleds can be made independently with collapsible or non-collapsible ones. The metal structure consists of a rigid and durable base, with a platform made of boards or plywood placed on top of it. It is on this platform that the cargo is secured for transportation to the fishing spot.

In this article we will look at a design for the manufacture of which you can take an aluminum sheet and a metal profile.

detailed instructions

Two boards can act as runners, which must be used first. A compass will help you draw half circles that are cut using a jigsaw. To secure special bars on the runners, holes are created. Their connection should be made using rounded probes using the gluing method . The created structure should be strengthened at the back and front of the runners; for this, transverse strips are laid on the spikes. The design should look beautiful, so after the glue has dried, the excess should be cut off.

A fishing sled should definitely have a seat; a board can be used as a seat. In the area where the equipment box is installed, it is worth making grooves for connecting to the runners. In order to strengthen the structure , bars need to be glued to the back of the skis. In the areas where the runners are rounded in the lower part, it is necessary to reinforce a strip of steel with screws.

Before complete assembly, the design should be examined to check the accuracy of the connections. If there are parts that have been sanded before, they should be coated with waterproof varnish . Such sleds must be checked for strength after completion of work on their creation. To do this, all the equipment needs to be placed inside, because no one wants the product to fail at the most important moment.

Making a sled from aluminum

A fishing sled should not only be functional, but also quite light, because sometimes with their help a person has to move on ice that can crack. To create a sled made of aluminum, you should take a sheet of suitable material and a profile. The parameters must be selected based on the size of the tools being transported and the parameters of the fishing box. The design consists of three parts, namely:

• Skids.
• Bottom.
• Two side walls.

The work will require a bending tool. You can get by with metal corners and a mallet. The side parts should be made identical and reinforced; the back wall is made in the same way.

The latest to be made is the aluminum bottom . It is necessary to make the edges of the sled safe; to do this, they are bent. Additionally, they also make runners. They can be made from aluminum profile. To make bending the runners easier, it is worth making slits in some places. At the last stage you need to assemble the sled. For this purpose, nuts, bolts and screws for metal connections are used.

Modification of plastic sleds

Such structures are made in the form of a trough , are lightweight, can survive exposure to low temperatures and can have different dimensions. But such sleds have one drawback: they do not have a rope attachment. Correcting this deficiency falls on the shoulders of the fisherman himself.

Special drag sleds can be supplemented by equipping them with suitable fastenings . To do this, drill the required number of holes around the perimeter into which a metal cable with special fasteners can be inserted.

To install a special rope on the front side of the product, you should install 2 eye bolts, and the rope will be secured to carabiners. Eye bolts must be installed using nuts, which will be durable and quick to fasten. This modification of the fishing sled demonstrates that the fastening system has not failed over many years of use.

You can easily create a fishing sleigh with your own hands; they can be supplemented at any time. For example, modifications include the back, as well as the trunk and even decorative elements. Such durable sleds can be a budget option and an excellent alternative to factory models.

Making your own fishing sleds

This design has the following advantages:

• light weight; • ease of manufacture; • large capacity; • ease of movement; • performs well in deep snow.

The dimensions of the structural elements can be chosen at your discretion.

In our case they are:

This is a cross-sectional view of a fishing sled, showing its 3 components:

1. side walls; 2. bottom; 3. runners.

Side walls

You need to take an aluminum sheet GOST 21631-76 with a thickness of 3–4 mm and draw the contour of the scan. Then the workpiece is cut exactly along the contour, the cutting lines are aligned, and the burrs are smoothed out. Using a bending machine, the reamer is bent in the right place and at a certain angle. As a result, we have the product shown in the image.

We can drill through holes for fasteners on a reamer, or we can do it when we assemble three parts.

It is made in a similar way to the side walls.

Let's start marking the channel made of aluminum and magnesium alloys GOST 13623-90 of the required length. On it you need to mark the fold line and the corner of the section, which will act as the bend angle of the runners. We cut out the sector through.

We bend the profile and get the desired product.

Finnish homemade sleigh

As an option, you can make a Finnish sled with your own hands (finka), which is no less popular among fishermen. Their design is extremely simple and consists of three main components:

• skis,
• back,
• chair.

It is better to make the design collapsible so that it can be conveniently transported on the subway or in a car. Immediately before starting the manufacturing process, it is better to sketch out a drawing of the future sled.

Making a sled starts with the runners. You need to select two metal rods about a centimeter thick, three meters long and six to seven centimeters wide. The ends of the rods are smoothly bent upward and holes are made for the rod, which will fasten the runners together. The rod itself should be ten millimeters in diameter, with threads on both ends.

After this, the back and seat are mounted. They are made from hard wood such as oak or birch. You will need wooden blocks measuring 4 by 4 centimeters: two horizontal, vertical, transverse and one as a steering wheel. The sides of the seat are covered with boards. All wooden parts of the sled are fastened together with screws or bolts. The runners are connected to the main structure by welding. You can also weld a hook on the back of the backrest to secure a bag or backpack.

The distance between the runners should be at least 40 centimeters, but to increase their stability this value can be increased by another 10 centimeters.

If desired, you can make a kind of snowmobile out of such a sled by installing a chainsaw motor on it. However, this will increase the weight of the sled, and it will be problematic to move it from place to place. In addition, some fishermen equip a tent for shelter from the wind .

How to make a sled for winter fishing - types, materials and instructions

An avid fisherman always has a large variety of fishing equipment. Therefore, when going winter fishing he will need: a tent, an ice auger, a fishing rod, a tackle box and much more. It all depends on his financial capabilities and the nature of the upcoming fishing.

If the fishing spot is somewhat remote and cannot be reached by road, it is necessary to come up with the optimal means of delivering all fishing equipment.

Because moving on the ice surface is not as easy as it might seem at first glance. This issue can be easily resolved with the help of a sled for winter fishing. Sometimes, the sled even turns out to be a place of rest and overnight accommodation for a fisherman who has been hunting for a trophy specimen for several days.

How to choose a comfortable sled for winter fishing

There are a large number of different designs and modifications of winter sleds for fishing. The most popular designs today are those on metal runners. They can be either solid or folding. For a very long time, fishermen gave their preference to this type of transportation in winter. But if you put both gear and equipment on the sled at the same time in snowy areas, movement will be difficult. Whereas on ice and rolled crust, they perform well.

That is why plastic structures, characterized by convenience and practicality, have become an alternative. They have wide skis, which prevents the structure from collapsing during movement. Although there is a small minus. This device is characterized by low sides, which makes it necessary to additionally secure gear and equipment. But even with this inconvenience, their popularity does not decrease.

How to make a fishing sled with your own hands

Anyone can create a winter sled with their own hands. You just need to first select the desired homemade option.

If you are interested in a high-quality transport mechanism for delivering fishing gear in the winter, you can make a wooden, plastic, aluminum or metal sled. It all depends on the materials you have.

Metal sled with runners

This kind of metal sled can be either non-collapsible or foldable. Literally a couple of decades ago, only such units existed. This mechanism has a large load capacity, its design is very rigid and powerful.

In this case, fishing gear can be laid out on a cargo area made of wooden boards, plastic sheets or chipboard.

How to catch more fish?

The negative side of using this kind of winter sled for fishing is their poor movement in snowy areas. The skis are designed to be quite narrow, and with a large thickness of snow this causes inconvenience. Whereas the surface of a reservoir with a low layer of snow or just ice is ideal for moving this unit.

Plastic sled

Plastic sleds, made in the shape of a trough, performed well during fishing. They have frost-resistant characteristics, transport fishing gear through the snow without any interference, and do not cost that much. Everything depends, naturally, on their size and the quality of the base material used.

Although most fishermen advise making their own plastic structures for winter fishing. They claim that it is not difficult.

Wooden sled

A wooden sled will be a good choice for your trek. They will be able to deliver all the gear to the right place without any difficulty and will serve you faithfully for many fishing trips.

Required materials and tools:

• boards, preferably pine;
• wood glue;
• sandpaper;
• jigsaw;
• drill and more.

Step-by-step instructions for making them:

1. Take two boards that will later act as runners. Using a compass, draw semicircles on them and cut them out with a jigsaw.
2. To secure the cross bars, holes are drilled on the runners. It is recommended to connect them using round tenons using the gluing method.
3. To strengthen the resulting structure, transverse strips on spikes are placed in front and behind the runners.
4. To make the structure aesthetically attractive, it is necessary to trim off the excess after everything has dried.
5. Grooves are cut out on the board, which will later act as a seat, and at the site where the tackle box is mounted, for their further connection to the runners.
6. Bars are also glued to the back of the skis for reinforcement.
7. At the bottom of the rounding point of the runners, a strip of aluminum or steel is screwed with screws.
8. Before proceeding with the final assembly of the structure, it is best to examine its individual parts for the accuracy of the connection. Plus, all spare parts are sanded and coated with waterproof varnish.

How to make a fishing boat

Building a boat will not be difficult for a craftsman.

1. The main material is wood, which is the skeleton of the entire structure. Linden or alder boards are best suited. The thickness is no more than 12 mm and the width is 20 mm.
2. Small washers, nuts, metal pin. Pay attention to the thread, it must match on all parts. The approximate diameter should be 6 mm.
3. Weights will also be needed; they are the main component of the keel half. Lead plates can be used as weights.
4. The next step is to treat the wood with a product that resists the process of water absorption. Regular drying oil will do.

Before you start directly building the boat, make your own or use the diagrams we offer, and study them carefully.

You will also need to buy an electric mechanism that will act as a motor.

A list of materials for the structure was compiled. Now let's look at the tool.

1. To cut parts from wooden plates, use an electric jigsaw.
2. For grinding and rounding some parts and trimming metal studs, use a cutting machine.
3. Screwdriver - for tightening screws and drilling holes.
4. In accordance with the diameter of the metal pin - metal drill.
5. For tightening nuts - open-end wrenches. Select them according to the nut size.
6. And of course drawings and tape measure.

So, all materials and tools have been collected, you can begin construction.

And first of all, don’t forget to treat the boards with a moisture-repellent liquid. After drying, apply a coat of paint. Choose the color so that the fish in the water are not afraid of it, but at the same time you should be able to see the boat from the shore or boat. Let the parts dry completely.

• Cut out several trapezoid-shaped pieces from the boards. Drill holes following the diagram and connect the parts together with metal pins.
• Install the bracket. Attach lead plates to the bottom of the structure using self-tapping screws.
• After completing all construction operations, you can start fishing.
• Remember that such a boat is best used for catching large predatory fish.

We wish you successful fishing!

What types of winter fishing sleds are there?

Large Sport 1630

• they are durable, but at the same time not heavy (10.4 kg);
• very large (165×81×43) cm and roomy;
• frost-resistant;
• have high sides;
• good for transportation on slippery winter surfaces.

Having caught 237 kg of fish, the poachers were not punished!

During interrogation, the detained fishermen revealed the name of the secret bait.

Mini Sled 1110

Weighing only 3.6 kg, these sleds are perfect for hand towing. The main material of manufacture is polyethylene, which has proven itself to be frost-resistant. Thanks to the presence of a wide supporting surface and a low center of gravity, the sled is able to pass through any snow-covered areas.

Very often, ordinary children's sleds are used as fishing winter sleds. There is no need to make or buy them, since they can be found in any home. But there is also a small drawback of this design: with a huge volume of snow cover, it gets under the jumper, which makes it difficult to move.

Structurally, these sleds are presented in the form of cylinders, securely attached to the runners. There is a little space between the cylinders and the cargo itself. For convenience, there are handles on the sides. This design is easy to transport, as it folds neatly and compactly into a case.

Sled-drags

A drag sled is a very capacious design designed for transporting not only fishing equipment, but the catch itself. The base material for making drag nets is considered to be plastic, which is highly frost-resistant. You can easily roll the sled by simply holding the rope.

Since there are no skids in this case, the design is characterized by a low center of gravity. And this is an additional plus - good stability. Due to their width, drags are able to easily plow almost all the uneven surfaces of the reservoir. The height of the sides allows you not to worry about the safety of the cargo; your gear will not fall out.

Fishing sled for snowmobile

Most fishermen are convinced that a snowmobile sled is a useful thing. But first, everyone should decide which type of transport they like. After all, these can be both skids and ordinary structures with runners.

The most interesting options were discussed earlier. Moreover, you can make a sled for a snowmobile yourself, and indeed, just like the snowmobile itself, you can make it with your own hands. After all, this is a fairly simple design.

Tips for improving purchased sleds for ice fishing:

• so that the inner surface of the sled does not have ice, it is necessary to lubricate the bottom with silicone lubricant or special wax for skis;
• if the trajectory will take place in the dark, it is recommended to attach reflective strips to the edges of the sled;
• In addition to the sled, add a folding chair. It can be secured with a rubber band.

Nowadays, it is not necessary to have a lot of money to comfortably go fishing in the winter. Because with your own hands you can create almost any gear and equipment that will be useful for fishing. This is confirmed by winter sleds for fishing, with which you can easily transport cargo on an icy body of water. Everything is exclusively for your comfort and convenience.