Porridge for fishing - how to cook?

Steamed pearl barley porridge

On some reservoirs, steamed pearl barley grains give good results. To prepare this porridge, pour the required amount of cereal into a small saucepan or metal mug. Next, pour enough hot water so that it protrudes above the pearl barley in half a layer. Place the container on low heat and stir the contents periodically so that the grains do not stick.

When the grains have absorbed all the water, remove the saucepan from the stove and wrap it in something warm (for example, a towel). Keep it in this state until it cools completely so that the pearl barley steams and swells better. This will help her to hook well and stay on the hook for a long time in still water and even in the current.

There is an easier way to prepare pearl barley porridge for fishing. A handful of grains is poured into a thermos and boiling water is poured into it. After about an hour, the water with the swollen cereal is drained into a colander. When the pearl barley dries a little, it needs to be transferred to newspaper or paper folded in several layers. To prevent the porridge from sticking, you can sprinkle it with dry semolina. Then in the water it will separate from the bait and additionally attract fish.

Hercules porridge

There are several simple ways to prepare oatmeal porridge.

1. Place the cereal in a colander and pour boiling water over it. When the water has drained, the rolled oats are transferred to newspaper to dry it completely. This kind of porridge can be planted with several petals on a hook.

2. Oatmeal is wrapped in a cloth or gauze and dipped in boiling water mixed with milk for a few seconds. After this, dry it on newspaper.

3. You can prepare cereal with milk in the usual way, but without adding salt and sugar. You just need to cook until semi-solid.

4. There is also a great option for preparing porridge for fishing right on the spot. Dry flakes are wrapped in gauze or a cloth, dipped in water and allowed to drain. Knead the resulting mass thoroughly with your hands. If the porridge is watery, you can add a little dry oatmeal to it so that it absorbs excess moisture. If you add mashed cake, it will attract white fish, including carp and carp.

How to catch crucian carp on wheat

Porridge can be used as a bait for fishing, and not just as complementary food. Moreover, luring to these products is carried out in a special way:

• at night before actual fishing you should throw in about 7–10 kg of the finished product;
• in the daytime it is necessary to repeat complementary feeding with a smaller amount of wheat. It is important to always throw it into the selected area of ​​the reservoir;
• During fishing, it is useful to re-throw the product once an hour (and not more often).

If the porridge is an attachment, then the rules for its use are as follows:

1. Place the grains on the hook, after squeezing them a little.
2. Throw the tackle into the desired area.
3. React quickly to the bite, as the fish can quickly grab the bait.
4. If there is no bite, you need to recast and change the fishing location.
5. Throw a tackle with new, fresher bait with wheat grains that has not lost its flavor every 15 minutes.

Find out also how to quickly and tasty marinate crucian carp.
For beginners in fishing, all the information described above will be very useful. Everyone should remember a few simple ways to prepare wheat porridge. Steaming the product is interesting to everyone who cares about a positive result of catching crucian carp. After all, this cooking method allows you to preserve the beneficial properties and aroma of the grains, as well as their integrity. All further nuances, such as aromatization, require not only special attention, but also verification at the fishing site. Have a good catch.

Semolina and oatmeal porridge

This recipe is also great for catching white fish. Pour a glass of water into a saucepan and put on fire. When it boils, add two tablespoons of oatmeal and two teaspoons of sugar. After the foam appears, pour in almost a full glass of semolina in a thin stream, stirring constantly. After this, immediately remove the pan from the heat. Continue stirring the contents until the dry grains are completely dissolved.

When the mixture of semolina and oatmeal has cooled a little, it should be crushed into a tight ball and wrapped in a towel. After fifteen minutes, anise oil is added to the finished fishing porridge.

Semolina chatter

This unique recipe can be used directly on the pond. You need to pour a little water into the container, pour in enough semolina to make a thin paste. Leave for a few minutes so that the cereal absorbs some of the liquid. Then vigorously stir the contents in a circular motion until the mass becomes sticky and viscous. If the porridge is runny, you need to add more dry semolina. Do this in a thin stream, while stirring with a stick or spoon.

It is customary to screw such a nozzle onto a hook using a stick. The porridge will hold tighter if you first roll it in dry rolled oats and knead it thoroughly. This recipe is great because it can be stored in the freezer in a toothpaste tube. This container allows you to make even flagella around the hook without the use of additional items.

Millet porridge

For fishing, this recipe is used when you plan to catch more carp. It is quite problematic to cook high-quality millet porridge, but there is a very successful way.

The washed cereal should be poured with water in a ratio of one to three and put on fire. As soon as the porridge boils, start stirring until it thickens. This must be done continuously in a circular motion. After a while, it will become difficult to stir the millet. Then remove it from the heat, press it down a little and put it in the oven for about seven minutes. The finished porridge can be stored in the refrigerator.

Delivery of bait to the fishing site

Porridge is delivered in different ways: with a feeder, with a ball (using a slingshot or hand). In this case, all types of casting are good because our porridge is sticky and molds well.

A lump of pea-millet bait lay in the water without a current for about 12 minutes.

But the feeder has an advantage and it lies in the fact that when casting a feeder or donkey, the feeder lies on the bottom next to the hooks, and you can either underthrow or overthrow the ball to the fishing spot. Homemade spring feeders, made by yourself, are excellent for this kind of fishing.

Kulesh for fishing

This porridge is prepared from a glass of corn flour, a tablespoon of wheat flour and the same amount of semolina. Mix everything well and add a small amount of liquid. This mixture is transferred to boiling water and cooked over low heat until tender. During the process, it is recommended to add crushed sunflower seeds, sugar and vanillin, and in the fall - salt. This is just the option when you need to find the perfect recipe for how to cook porridge for crucian carp fishing.

Porridge for carp and carp

This is a catchy porridge for fishing for carp and carp.

Expert opinion

Chashchin Pavel

Federation of Fishing Sports of the Moscow Region

It is better to use filtered water for cooking. In advance, you need to soak 1 part of the peas in water for 10-12 hours. For preparation you need 6 parts of water.

Add 1 part soaked peas and 1 tbsp to boiling water. spoon of sugar. Cover the pan with a lid and cook over low heat for about 15 minutes, stirring our porridge periodically.

Next, you need to add 2 parts of millet, mix everything, cover again and cook for about 15 minutes.

After this, add 2 parts of corn grits, mix, cover again and cook until the water has evaporated.

Before fishing, you need to add ground seeds or ready-made commercial bait for carp to the porridge. This porridge is good for fishing on a nipple.

Pea porridge recipes

1. The easiest way is to steam a few spoons of peas in a thermos. When ready, add a little sunflower oil and transfer the porridge to a colander to drain excess liquid.

2. Pre-selected boiled cereal will be most effective. Soak the grains overnight in a liter of water with the addition of a teaspoon of soda. The next morning, pour water over the peas and let them cook. Check for doneness every ten minutes. Pour the porridge into a colander and then onto a hard surface to remove any remaining liquid.

3. But pea porridge made from shelled grains will be more successful for fishing. Rinse about a glass of beans, add water and leave for about three hours. After this, you can prepare a dough-like bait. Add enough water to cover the peas by three centimeters. When the porridge boils, reduce the heat and simmer, covered, until tender, stirring occasionally. It is not recommended to remove the resulting foam. If the peas are easy to crush, turn off the heat and allow the liquid to evaporate. The result should be a homogeneous lump that can be easily turned into a puree.

To attract more fish during cooking, you can use sunflower oil, milk, honey or granulated sugar as flavorings.

4. Only combined porridge can be more effective than the previous one. Peas are ground in a coffee grinder, and the resulting flour is poured into water. They usually cook for fifteen minutes. Corn grits and semolina are added to the peas. Mix everything well and cook until soft. It is recommended to add crushed boiled potatoes, anise or vegetable oil to the finished porridge.

How to prepare millet porridge for bait

Spring equipment

For effective fishing, it is necessary not only to have porridge that is tasty for fish, but also to properly equip the spring. At the same time, one should take into account the fact that the size of the spring is selected for a specific type of fish. For catching crucian carp, smaller springs are suitable, but for catching bream, and especially carp, you need to choose more massive products. Universal equipment looks like this:

1. The main additional element of each rig is a leash with a hook. There can be several of them in this equipment, from 2 to 6 pieces, about 5 cm long. The leashes must be strong and flexible. The main material is braided or nylon thread.
2. The size of the hooks is also selected depending on the size of the expected prey. As a rule, these are sizes No. 4-9.
3. Sometimes additional weight is used, so the leashes are attached directly to the spring.
4. Additional sinkers can weigh from 30 to 50 grams. As a rule, sinkers are attached to the end of the fishing line, and after it several springs are attached with leads attached to them.
5. The length of the rod can be about 3.5 meters, with a dough of at least 40 grams.
6. The reel must have at least 100 meters of fishing line wound on it, with a thickness of 0.25 to 0.3 mm.
7. The moment of a bite can be caught by the tip of the rod, but it is better to use a bite alarm, either simple or electronic.
8. The reel is a spinning reel, size 3000-4000, with a baitrunner function.

Types of springs

There are 3 main types of springs, differing in shape, size and installation features. These include:

1. The first type is a “donut”, which represents a long spring coiled into a ring (donut shape). As a result of folding, a ring with a diameter of up to 50 mm is obtained, while the spring has a diameter of about 15 mm. One common leash is attached to such a spring, and additional leashes are attached to it.
2. The second type is a “harvester”, which has the shape of a conical spring. The leads are attached to the top of the cone. This type of equipment is compact in size and easy to use, so it can be recommended for beginner fishermen.
3. The third type is the “crucian carp killer,” which differs in the method of installation. To eliminate the additional weight, 3 springs are attached one after another. Each spring has its own leash with a hook. The distance between them is 12 cm. In some cases, especially when fishing in the current, it is still impossible to do without an additional sinker. It is attached to the very end of the main fishing line.

Baits are selected taking into account many factors, such as the time of year, the preferences of the fish, as well as its type.

You can get good results if you use the following attachments:

1. Fresh or canned green peas.
2. Fresh or canned corn.
3. Maggots.
4. Bread crumb.
5. Dung or earthworms.
6. Insect larvae.
7. Regular foam.

Quite often, fishermen use foam, or rather foam balls mounted on hooks. This especially works when the reservoir has a very muddy bottom. A regular bait will sink into the mud before the fish even discovers it. As for the foam, it will be in the water column due to its buoyancy. Why fish bite on polystyrene foam is not known here; there are so many fishermen, so many opinions. The technique for fishing with foam is as follows:

1. To begin with, the fishing point must be fed with porridge.
2. A foam ball is placed on each hook, and the tip must be open.
3. After this, the tackle is thrown into the desired place.

Fish can accidentally swallow polystyrene foam. There is one more assumption about this. The fish still knows that polystyrene foam is an inedible bait. If so, then it is garbage that needs to be removed. She puts the foam in her mouth and gets hooked. The fact is that the foam ball is always in the fish’s field of vision.

Fishing on the current, no matter what the gear, has its own characteristics. The presence of a current does not guarantee that the equipment will always end up in the same place, since the current moves both the sinker and the spring along the bottom, and with them the leashes with hooks. When feeding the same place, you should take into account the strength of the current, throwing the bait into the same place.

Fishing in the current requires the angler to:

• Accurate calculation of the weight of the spring so that it is not moved by the current along the bottom.
• Cook the porridge to such a consistency that it can be held in the spring until it touches the bottom, plus another five minutes, but no more.

Fishing in the current requires a lot of experience and knowledge from the fisherman. It is very important to choose the right promising location.

Millet is often added to purchased bait. When a large fish approaches the fishing point, then in order to keep the school near the feeder, the bait must contain something high-calorie, and not just “dust”. Millet is an inexpensive and very effective supplement.

All we need is millet and filtered water.

We invite you to familiarize yourself with: DIY plywood boat: drawings and necessary tools

Expert opinion

Chashchin Pavel

Federation of Fishing Sports of the Moscow Region

The ratio of water and millet should be 8 to 1. Pour millet into boiling water and do not forget to stir periodically, as the cereal may burn. Cook over medium heat for about 15 minutes. Then drain the water and the millet is ready.

Some fishermen wash the finished millet under cold water so that it does not produce turbidity in the water. But this is a moot point; you don’t have to wash it.

Also suitable for fishing for crucian carp.

• The ratio of water and millet should be 2 to 1.
• You need to add millet to boiling water and cook until the grain takes up all the water. It is necessary to stir frequently so that the porridge does not burn.
• When the millet has absorbed water, you need to remove the pan from the heat and add a glass of ground flour or ground seeds.

If you need a more crumbly one, then you can add more flour or seeds. And if you need something more sticky, for example, for spring feeders, then add less corn and seeds.

An excellent bait for catching bream and white bream with a ring. To fish with a ring, you need a dense porridge that will not wash out of the net throughout the day. To prepare this porridge you will need 8 parts of water.

You need to add 1 part peas and 1 part pearl barley to boiling water. Cook over low heat for 15 minutes, don’t forget to stir.

Next, add 1 part of millet. Cook for 5 minutes, add vanillin and 1 part barley. Mix everything well.

When the porridge has taken up all the water, the pan can be removed from the heat. The bait is ready.

Recipe No. 1

To fish with a feeder, it is not necessary to buy ready-made bait. You can make the bait yourself, and it will not be much inferior in catchability to store-bought mixtures. An important property of feeder bait is rapid leaching from the feeder. To prepare the bait we will need:

• Dry ground peas - 2 parts.
• Ground rolled oats - 2 parts.
• Ground seeds - 2 parts.
• Breadcrumbs – 1 part.
• Semolina – 1 part.

This bait is very easy to prepare. 2 parts of dry peas, 2 parts of seeds and 2 parts of rolled oats need to be rolled through a meat grinder, and then pour in 1 part semolina and 1 part breadcrumbs. Stir until the mixture is homogeneous. The bait is ready.

All that remains is to add water to this bait immediately before fishing. The more water you add, the more the bait will stick together. Therefore, when fishing on a feeder with water, you should not overdo it.

Recipe No. 2

• For this bait, the ratio of cereal and water should be 1 to 8.
• Add 1 part of millet to boiling water. Cook for 10 minutes.
• Next you need to add 1 part of wheat cereal. Cook for 5 minutes. You need to stir occasionally to prevent the cereal from burning.
• Add 1 part of corn grits. Stir and cook for a few minutes.
• Then you need to remove the porridge from the stove, drain all the water, cover with a lid and let stand for 30 minutes. Next, you need to rinse the porridge under cold water until it becomes crumbly.

Dough-like porridges for fishing

Most often, anglers use the classic dough recipe. It is mixed with berry juice or milk. Any porridge, raw egg white, honey, garlic, valerian, valocordin, vanilla and all kinds of oils in minimal quantities are added to it. For one hundred grams of nozzle, two drops of flavoring will be enough. In large doses, on the contrary, they will scare away any fish.

The non-classical version of the test is also in demand among fishermen. To prepare it, take about half a glass of cooked peas and grind them into puree. The same amount of cooked oatmeal is added to it. Next, gradually add wheat flour and knead the dough. After this, roll it into a pancake and fry it in vegetable oil for several minutes. Knead in your hands and put back into the frying pan. The procedure is repeated several times.

Porridge for the feeder

Very often they use porridge on a feeder for fishing. But it will not be a nozzle. This gruel is a kind of bait, which is delivered to the required place using a sinker.

A mixture of oat and millet cereals gives an excellent effect. They are taken in a ratio of one to three and filled with water, which should be twice as much. After a few minutes of cooking, toasted crushed sunflower seeds and pieces of poppy seed are added to the mixture, but its dust is also perfect. Cook the porridge until softened, cover with a lid and let it brew for an hour. After this, grease with vegetable oil and transfer to a bowl. Under no circumstances should you salt!

In closed reservoirs, it is most effective to use millet porridge. You need to prepare it according to the above recipe. Only during cooking add a tablespoon of softened semolina.

Pearl barley is also an excellent bait. A glass of cereal is poured into a thermos and filled with boiling water. After four hours, the swollen grains are passed through a meat grinder and mixed with crushed toasted sunflower seeds and maca dust.

There is also a cheap fishing porridge recipe that can be used for feeder sinkers. You will need two handfuls of oatmeal and a crumb of bread. They need to be mixed in a small amount of water and kneaded to the consistency of a thick dough. After this, the finished mass is placed in a feeder, and a little millet porridge with flavorings is sprinkled on top.

Dry groundbait from cereals

You need to know how to prepare a simple fish bait using the corn grits you have on hand. If it exists, of course. In principle, this is not a problem now; crushed corn is sold in any grocery store.

For preparation you will need:

• crushed corn grits;
• sunflower cake;
• a spoon of sunflower oil;
• semolina.

Do-it-yourself bait from good crushed corn grits is very effective.

Everything is as simple as possible here. For 2 shares of cereal, take 1 share of cake and ½ share of semolina. The cake should also be free-flowing. Everything is thoroughly mixed until dry. Add a spoonful of oil and mix again. Privada is prepared in the evening. This is necessary so that it sits overnight and the smells mix. Pour the bait into a bag and take it fishing in the morning.

Upon arrival at the site, pour the mixture into a bucket or other container. Pour the mixture with a small amount of water and let it stand for 5-10 minutes, and then, scooping it by the handful, scatter it at the points of intended fishing.

This method is only suitable for bodies of water that do not have a current. On rivers with the slightest current there is no point in using dry bait, it will immediately be carried away.

Porridge on a spring

The spring is a fairly convenient piece of equipment that does not cause any difficulties in handling. To catch fish, use plasticine-like bait. It is prepared very easily from medium-ground grains. They have sufficient stickiness and viscosity, which are necessary for good fixation and subsequent spraying in water.

The fastest and easiest way to cook is porridge made from barley and millet. These cereals are taken in equal quantities and filled with water in a one to one ratio. Leave for about twenty minutes so that the pearl barley swells but does not crack. After this, you can add a glass of cake or crushed crackers to the mixture.

Now you know how to cook porridge for fishing to get a good catch. Use the recommendations received and enjoy the result!

Homemade bait for fishing. Unique recipes

Homemade bait for fishing, made at home, is no worse in catchability than store-bought bait. We offer several recipes for popular types of fish:

Bream:

It is not an easy task to lure bream and force it to be in the right place. Here are examples of preparing bait recipes.

• 1st recipe: Take two kg of barley and cook it without overcooking. We rinse the prepared porridge until it becomes crumbly. Then we pour the bait into a container with a lid and go fishing. Near the pond, add no more than 1 pack of breadcrumbs to the barley porridge and mix everything thoroughly. The bait made is enough for fishing for a day for a couple of sixty gram feeders.
• 2nd recipe: Boil the peas completely, while the water in the pan should boil away. Then turn off the fire. Mix the resulting porridge with barley (1 recipe) in equal proportions. When you come fishing, you need to mash the porridge, and only then use it. In water, barley porridge will act as complementary food, and peas will create turbidity. If you fish in cool water (low temperatures), add flavorings to the porridge. In this case, coriander is suitable: put no more than one or two pinches. If you are fishing for maggots, then add them to the bait.

Roach:

This fish eats vegetation and small living organisms.

• 1st recipe: Take rye (3 parts) and steam it. After cooking, add ground crackers (3 parts); oatmeal (2 parts); ground rolled oats (part 1a); crushed and roasted hemp plant seeds (1/2 part); filamentous algae (half part); grated garlic - half a tablespoon; small maggot (2 parts);
• 2nd recipe: Make the composition - ten grams of semolina; breadcrumbs one kg; fried ground hemp -100 grams; vanillin - ten grams; powdered milk - 100 grams; barberry - 5 grams; cinnamon - thirty grams; sugar - granulated - 30 grams; daphnia -20 grams; maggot - fifty ml; bloodworm -200 grams.

Ide:

Bait plays an important role when catching ide. If done correctly, fishing success increases significantly.

• 1st recipe: Mix the following ingredients. Crushed white crackers (half part), granulated sugar (2/10 parts), bran (half part), ground hemp cake (half part), ground flaxseed cake (quarter part), crushed peanut cake (half part) , cinnamon (tenth part), coriander (0.05 part), pineapple in alcohol solution (2.5 ml), powdered milk, banana (2/10 part each), clay (8/10 part), bloodworm (half part ).
• 2nd recipe: Take a large container and add the components of our bait there. Crushed green peas (five parts), ground flaxseed cake (three parts), ground, dried orange peels (1 pinch), lemon balm (1 pinch), ground crackers (2 parts), powdered eggs (2 parts), ground hemp seed, fried (half part), steamed rye (three parts), small maggot (three parts), chopped dung worms (4 parts). Mix everything, and the bait is ready.

Crucian carp:

Two options for feeding crucian carp.

• 1st recipe: Ground, fried hemp seeds 1n cup, oatmeal cookies 2 pieces, dried egg capsule root, ground 1 tsp, wheat breadcrumbs -1n cup, ground, dry rolled oats -2a cups.
• 2nd recipe: Millet porridge - 3 parts, ground flaxseed cake - five parts, dried linden blossom - half a part, ground fried hemp seed - half a part, chopped worms - 3 parts, lavender and mint oils - no more than 2 drops.

Perch:

• 1st recipe: Dry ground clay (four parts), crayfish oil (three parts), crushed egg shell (1 part), often chopped tinsel (half part), dried blood (1 part), jig (five parts), finely chopped worms infused with goose fat and hemp oil (five parts).
• 2nd recipe: Dry and crushed clay - five parts, scales from small fish - one part, crushed flask from a worn-out thermos - half a part, crayfish meat - three parts, dried blood - half a part, bloodworms - three parts, lavender oil -2 or 3 drops, finely chopped worms infused with honey and hemp oil - half a part.

Happy fishing!

Tags:bait