TOP 10 best ratlins for pike - how to choose the most suitable one

A distinctive feature of this species is the rattle in the body of most models, which attracts pike from a long distance with its noise.

For successful fishing you need to have a set of knowledge on the selection of baits and fishing methods.

What is rattlin?

Wobbler is one of the most popular baits for catching any predator.
The release of the rattlin and popper, models without blades, brought additional color to this type of fishing. Essentially, this is a small wobbler. The body of the bait is made flatter, the front blade is missing. But inside the body there is a special chamber with balls, which create noise when the bait moves.

Important! The game of bait is attractive to pike. A high frequency of oscillations with a small amplitude of movements is the distinctive ability of rattlins. A model was developed for perch fishing, but practice has shown high catchability of pike perch and pike perch.

Features, characteristics and comparison of rattlins with wobblers

There are several main differences between rattlins and wobblers and the characteristics of the bait:

1. One of the main distinguishing features is the body shape of a bladeless wobbler. Some manufacturers produce models with a wide head. This is a type of lobe bait. Catchable under various fishing conditions. Slow retrieval is able to reveal all the characteristics of a high-frequency, small-amplitude game of bait. The more rounded front end further reduces the amount of lateral deflection. This feature is revealed only with a certain method of management.
2. They differ from wobblers and from each other in the presence of a separate chamber with rattles built into the body. This is important when winter fishing for pike. The pike escapes from the noise at this time, so models with a rattling head are used in open water. They are especially catchy in reservoirs with muddy water, attracting the attention of the lateral line of predators at long distances.
3. This type of bait catches pike in mid-water, but heavier rattlins are produced that work at greater depths. For sea fishing, Asian manufacturers have developed models that are one and a half times heavier than their analogues. These rattlins can be used for catching pike on large lakes or in strong currents. Classic rattlins activate a well-fed, passive pike.

The bait can become vertical when reeling, this is due to the upper location of the fastening loop. But the main difference from wobblers is the absence of a nose blade and the excellent action of this bait, which works in open water and when fishing for predators under the ice.

Rattlin's choice

When selecting baits, you should pay attention to 4 basic rules:

• For pike fishing, it is important to choose the right bait size. Rattlin with a body length of 65–90 mm will help you avoid empty bites.
• Fishing from ice - at this time, the elongated body of rattlins is more effective. Winter models should have natural colors; it is better to buy a silver bait. 80–100 mm is the length of baits for winter.
• Rattlins with cuts on the side surfaces attract more pike. This bait activates the fish with a very slow retrieve, which is important when fishing for pike in late autumn, during the feeding season.
• To create small turbulences when the rattlin moves, the tail tee is equipped with various decorations . Many anglers advise removing the rear hook, thus reducing the number of snags.

Important to remember! When going on winter fishing, you should prepare silent large rattlins. But in open water, the predator prefers to attack the bait with a rattle.

Rattlins for surface fishing

These models have already proven themselves to be real “killers”. So I’ll list them right away:

• ZipBaits Rigge Vib 63;
• Megabass Vibration Power Bomb;
• Megabass Vibration-X Micro.

A few seconds to deepen - and then just uniform slow wiring. Several attacks per 3-4 m of wiring are guaranteed. Cast in a fan and preferably close, since the flock is already gathered near the watercraft. Here everyone already chooses their fishing credo: either catch more, or send them to grow up.

Controlling vibrations does not require any special sophistication or strictly specialized rods. The only thing that is contraindicated is the soft tip. If you take one rod to a pond, then it should be close to the twitch type. The last time I took St. as my partner. Croix Legend Tournament LTES76MHF. And he was right: both the wind loads and the wave absolutely did not interfere with either the bottom “feel” at great depths or the “elevator mode” in short distances.

Observations of the fishing process

Naturally, they graze harshly on large bodies of water. And although we never left early (we usually started at noon or an hour later), as we fished, the number of boats around us constantly increased. The local “aboriginals” (who were fishing next to us with “sekushi” - winter lures) could not gather the flock and stir it up: their fishing sector, unlike us, was too small. Spinners fishing with jigs were also not particularly happy at a decent wave and 8-meter depth. During my sports activities, I learned to calculate the rate of catching my opponents. The balance was clearly in our favor. At least 1:10 compared to the locals (although there were three of them in the boat and they were constantly moving around the reservoir), and the spinners seemed to be simply swinging on the waves. I noticed fish hatching with them only twice. This is simple arithmetic, when narrow-sector fishing is of low yield, and bottom jig fishing is irrational.

Thus, the entire process of raising and capturing could only be carried out by one fighter. I will repeat its correct name, accepted throughout the world - vib . I am not saying that vibes are only applicable in such deep conditions. I won’t be a hypocrite; in my many years of practice, I have devoted undeservedly little time to this multifunctional and interesting bait. And I only have 15 vibes. Now I’m catching up. Unfortunately, I was not able to catch pike perch this year using vibes. But for pike there will definitely be a continuation.

The best rattlins

The rating shows the leaders for winter and spinning fishing. Each fisherman has his own opinion, but, according to the reviews of the majority of river predator hunters, we have compiled the 10 best.

TOP 10 best rattlins for pike fishing

These include the following models:

• Rattlins produced by the company occupy a leading position. Bay Ruf SV are available in sizes 70 mm, 80 mm. A very catchy model for pike, but to catch trophy specimens you will need to replace the tees. In this case, the game of the bait may be disrupted.
• Fishermen call the Zip Baits Rigge Vib “redhead”; it is one of the most catchy winter models. Dimensions: 58 mm and 63 mm. Has an attractive play with silent vertical wiring.
• Mira VIB 83 bait allows you to perform long-distance accurate casting. Attracts fish with the work of the ratchet and the play of the bait's body with any type of spinner fishing. Uniform and slow, capable of attracting autumn fattening pike. The holographic coloring of the bait is complemented by the installation of fish eyes.
• The high-frequency action of the Hardcor FINTAIL VIBE 70 perfectly attracts pike at great depths. There is a small tail on the body of the bait, which adds additional color to the game. Lure weight 18 g.
• Rattlin "Rapala" is a famous Japanese deep-sea bait that can work at a certain level. The colors are made in different tones, so every fisherman can choose the best bait in his opinion. Body size - 70 mm, weight 16 g. A high-quality bait is made of excellent plastic that is not subject to breakage from pike jaws.
• Halco Max is a sea rattlin, but also works well in fresh water when catching predators. The main distinguishing feature of the bait is its narrow, elongated body weighing 80 g. Well suited for trolling fishing. Shows good results at a depth of 2–3 m.
• Winter rattlins Maria Slice . Slightly curved body with a narrow frontal part and a slight widening at the rear. This silent bait is catchy in open water. Casting range is provided by: bait weight (15 g) and body size (70 mm). Works at depth with vertical trolling and when fishing from a boat in reservoirs with standing water and in the current.
• Inexpensive model Strike Pro Flap Jack . It has 2 rings for fastening, which allows you to change the angle of inclination of the bait when retrieving. Mounting the rattlin closer to the front allows for smoother movements. It is made of high-quality plastic with different shades of color. For pike, bait lengths of 75 mm and 90 mm are used.
• Rattlins are manufactured in noise and silent versions. These baits are catchy all year round, but the best results are during the predator’s feeding season. The weight of the bait is 14.5 g, length 61 mm.
• Twitching Lure is an innovative lure that is suitable for any predatory fish. It works by imitating the behavior of a wounded fish. Increases catch by at least 3 times in any fishing conditions.

Choosing a color

The general rule applies here for all lures for pike fishing.

Important! Fishing at a depth of up to 5 m at normal lighting levels - in these conditions it is better to use baits of natural colors with the addition of some decorative finishes in the form of fish eyes, pearlescent spots on the body of the bait. For fishing at greater depths, poisonous colors are used with some additional decorations in the color of the bait and hook.

But in any case, it is important to prepare several proven bait options for fishing.

Noise or non-noise

Here the answer is clear. Winter does not tolerate noise. At this time, the pike is more careful and may be frightened by the additional noise effect. Therefore, ratchets are used in open water when fishing with spinning rods. But the tastes of fish can change dramatically, and for summer fishing you can take silent rattlins, which perfectly lure pike without making noise.

This applies only to pike; perch is attracted in winter not only by the game of the rattlin, but also by the noise effect from the bait.

Equipment

Winter wobblers for pike are used on the same equipment for pike as spinners with balancers. Balance is important here - the rod you choose is strong and at the same time sensitive. Wobblers for winter pike fishing require contact with the angler - otherwise you won’t get a good enough game.

Regular winter trolling rods with or without a reel are suitable. Line – 0.25-0.3 mm, winter fluorocarbon with increased resistance to damage and low elongation. The fishing rod should be able to work well on the first strong jerks of the pike and the sharp bite, but at the same time feel the game of the rattlin. Using a leader made of metal or thick fluorocarbon will protect the tackle from being cut by pike teeth.

Rattlin fishing technique

For effective fishing, it is important for beginners to understand what maneuvers the bait makes underwater with different styles of fishing. And also have the skills to perform different styles of baiting. Inexperienced fishermen leave negative reviews about the bait, which in capable hands provides excellent catches.

The game of bait will be attractive for pike with 3 methods of conducting rattlins:

1. Uniform. The work is carried out according to the following algorithm - casting, reeling in the slack line with a reel. After this, by uniformly rotating the handle at a certain speed, we carry out the wiring. Rapid rotation causes the rattlin to rise towards the surface. When moving slowly, it examines the bottom layers; for guiding at mid-water, the average speed of rotation of the handle is selected. This method is good for scouting pike sites. There are no blows, which means it’s worth trying the next method.
2. Stepped. This is a well-known jigging technique for leading lures. Cast, reel in the slack, then 4-5 turns of the reel, pause, and repeat the operation again. You can increase the number of coil turns and pauses in wiring. Works well on the edges of pits and river beds.
3. American. This is one of the varieties of jig wiring, but reeling in the line with a reel has been replaced by jerking with a rod. Works in warm water when pike are attracted by the active behavior of the fry. Zhora is not suitable for autumn fishing; pike likes the slow, calm behavior of its prey.

Features of seasonal fishing

Each season of fishing for pike with rattlins will require the implementation of basic rules and recommendations.

Fishing methods in summer

Catching baits for the summer are baits with a body size of 70 mm and a weight of 15 g. Such a rattle will allow you to explore all depth horizons. They start fishing an unfamiliar place from the bottom layer, then, changing the rotation speed of the reel, raise the bait higher.

There are no bites, increasing the rotation speed, they achieve its release into the upper layers. Pike can see the bait from afar and hear the rattle and are drawn from distant areas.

To improve tracking, a counting system is used, when, having determined the count of lowering the bait to the bottom, wiring begins 3-4 counts earlier, in the case of examining the bottom zone. It is better to use bladeless wobblers in areas with a clean bottom or to run them parallel to grass thickets.

In the summer months, pike do not gather in groups, being distributed throughout the entire reservoir. With the help of a rattlin, using the quality of long-range and accurate casting, you can fish large areas without leaving the spot. The noise effect is increased when using braided wire as the main conductor.

Ice fishing

This is the time for silent models. Size - up to 70 mm. The use of rattlins at depths of 2–3 m can increase the effectiveness of fishing. Heavier and larger ones will help explore depths of over 3 m. The game begins while falling to the bottom.

The glitter style is simple. A jerk is made with the fishing rod to a height of 300–400 mm, a pause. The bait is lowered to a predetermined depth, and the wiring is repeated. There is no bite - in this case, you should not move to another hole, try changing the depth.

The game is more attractive than the behavior of balancers in the water. After a jerk, the rattlin rises and returns to the bottom in an arc, making small-frequency oscillations.

Fishing from a boat

For fishing from a boat, rattlins are used in summer and early autumn. Large bodies of water, bays and areas with overgrown bottoms are the best places to fish with such baits. For effective fishing, you need to perform a slow or medium retrieve, making small jerks with the whip.

Spinning: length 2.4–2.7 m, test 15–18 g. For the main line, braid is used, the thickness depends on the size of the trophies and the transparency of the water. By changing the place where the rattlin is attached, you can change the angle of inclination of the bait.

It is better to hook it on a metal leash closer to the head. If an area with snags or large vegetation is being fished, use stepped retrieval, but do not allow the bait to sink into the thickets.

Experienced fishermen use the method of reconnaissance of the area in a circle or fish the area, dividing it into sectors. The optimal solution when fishing in an unfamiliar body of water and without an echo sounder. But it is important not to forget to fish all depth horizons, especially in the summer, when predators hunt fish escaping in the upper layers.

If after the first trophy a new attack follows, it means that a group of predators has approached this place, attracted by the game and noise of the rattlins. In this case, the boat is anchored and the area is actively surveyed. No bites - change the bait, continue searching for the predator.

In conclusion, some advice from experienced “pikers”.

Pike does not like warm water, in which case it is inactive. Go fishing early in the morning or evening. If you manage to get to the river during the day, first of all examine the shaded areas with snags or aquatic vegetation.

In winter, fish are active from 9 o'clock. It is important to carry out the bait correctly when fishing for pike with rattlins. This is a deep-sea bait, so it is important not to lower it to the bottom and snags, but also to lead it directly above the thickets. Therefore, it is important for beginners to learn the methods of stepped and uniform wiring.

Prepare several different colors and sizes of rattlins for fishing, so the catch will be guaranteed.

Happy fishing and outdoor activities.

Choosing a model for pike fishing

When choosing a rattlin for pike, you must follow several recommendations from experienced spinning players. • One of the defining characteristics of a pike bait is size. To cut off the bites of the “laces”, rattlins with a length of 65 to 90 mm are required. • For ice fishing for toothy predators, baits with an elongated body shape are required. It is preferable to use silver models. They create a believable imitation of natural prey in the bottom layer. The size of winter wobblers with a narrow body can range from 80-100 mm. • Pike love rattlins, which form some swirls when diving. Flies or fringe on the tail hook can achieve this effect. They attract the attention of the predator and also provoke him to bite. • Wobblers with small slits in the sides of the body work well for pike. Thanks to them, the rattlin makes special movements while reeling the line evenly at an average pace.

Recommendation! Active pike are better caught with rattling baits. The noise accompaniment provokes the toothy predator into a confident attack.