In what places is it better to fish with a screen? TV for fishing and fishing screen

What is a fishing screen?

A fishing tackle screen is a device with equal sides along the length (sometimes rectangular in shape) that catches unsuspecting fish in cells. It is classified as a handicraft fishing device; it is easy to tie by hand, and the result will not be long in coming. Screens are often used by fishermen to catch live bait for predatory fish; they are installed near the shore and during the time of collecting gear they manage to catch from several to ten small things.

They often use a screen on different bodies of water, but this is most justified on rivers with minimal flow, on reservoirs with standing water. They show themselves most effectively on the warm days of late spring and summer, when small fish come to the shore to profit. An analogue of this device is a scarf, which is adapted for winter fishing and is made of a triangular shape. The scarf is lowered into the hole and a float, a piece of wood, is tied to it, signaling the capture of fish.

It is better to use three-walled fishing screens, as they are stronger than single-walled ones, but are also more visible to fish.

Screens are often used to catch live bait on predatory fish.

Open water screens can be installed in two ways:

at a distance from the shore, a boat is used to deliver gear;
close to the shore. It is often possible to catch large fish near the dam or when casting a screen from a bridge close to support columns.

This specific fishing tackle is easy to use, but to get a large catch you will have to use a swimming device. Using a boat makes it easier to get the gear into a suitable place. Fishing with a screen far from the shore often turns out to be more effective, but near the shore it is possible to catch only small fish, usually in small quantities.

When making a fishing screen, we recommend that you additionally make a wooden pole to which the rope is attached. At the end of the rope there is a hook that can catch on a floating line. The device makes it easier to remove the screen from the water.

What is a "fishing screen"

A fishing screen is a popular rectangular or square-shaped device that belongs to handicraft fishing tools. Because of its shape, it is also called the “fishing TV”. The fishing screen allows you to catch fish without difficulty, especially small ones (for bait).

Fishing screens are best installed on reservoirs, ponds, and rivers where there is no current, especially on warm spring and summer days. But this does not mean that you cannot fish this way in winter. There is a so-called fishing scarf, the principle of its manufacture is the same, but it has a triangular shape, which is lowered into the hole and a float is used as a wooden block.

Fishing screen

You can install such gear in two ways:

on open water from a boat or boat;

near the shore, from a bridge, from a dam.

It is much easier to catch fish from a boat, since you can choose any fishing spot in a body of water and calmly throw the tackle behind a strong thread with a float. In any case, installing a TV from a boat will be more effective than from the shore due to the reeds. You have to additionally make a wooden pole with a rope. Attach a hook to the end of the rope that could catch on a fishing line or cord floating in the water, and thus retrieve the TV.

Is fishing with a fishing screen legal?

The use of fishing screens (“TVs”) is illegal and is subject to fines throughout Russia. With the help of the assembled screen, it will not be possible to catch a lot of fish; in terms of catchability, the tackle is inferior to donka and nets, but even taking this fact into account, the Fishery Supervision Authority prohibits the use of the device.

This is a risky tackle that is used at your own peril and risk. Even a small structure made by yourself is subject to fines. During spawning, the law is especially strict; now it is more correct to completely abandon fishing, even with fishing rods.

More often than not, fishing with a screen far from the shore turns out to be more effective.

When and where can you use a fishing screen?

There are no difficulties in using the “TV” both for a beginner in fishing and for a seasoned fisherman. If you have a boat, it is better to place the screen in the water, but as a last resort, cast from the shore. Those who often fish with “TV” often make a special fishing rod for delivering gear. When fishing, a long stick becomes an improvised fishing rod.

It is better to install fishing nets and screens in the place where prey feeds; it is also effective to install gear in narrow channels where fish migrate. To increase the effectiveness of the bait, you need to tie a common bait in the center: bread crumb, porridge, cake, etc.

Fishermen have come up with a very unusual method of luring prey using Christmas tree tinsel; its particles are attached on all sides of the net and lure the fish with glare from the falling sun. The method is applicable for peace-loving and predatory fish.

Before calculating a fishing screen, it is important to determine the type of potential prey in the reservoir. Usually small, medium-sized specimens of the most common fish in the reservoir are caught in the nets. When making a screen, they often rely on the size of a small crucian carp, rudd.

Despite the obsolescence of equipment and penalties for fishermen, three-wall fishing screens without equipment are actively sold online and are used throughout the country.

The popularity of this fishing method is due to:

ease of manufacture;
accessibility of all gear elements;
low screen cost;
high mobility of the fisherman;
universal use.

Because of the listed advantages, knitting three-wall screens will be popular for many years to come.

Effectively installing tackle in a place where fish feed

Instructions for making a fishing screen

It is better to buy a net for tackle, since weaving a net takes a long time, and the benefits are minimal.
If a fisherman prefers to weave himself, he will have to stock up on fishing line and endurance. Fishing line screens can be made by hand

How to weave a fishing screen from fishing line:

Initially, we make the elements - the main part of the grid and screen; a network is assembled from a number of such elements.
Along the edges, the parts are fixed with a strong rope or wire that acts as a frame.
We plant the mesh. There are 3 main types of landing: 1:2, 1:3, 1:15, which means attaching a mesh every 2, 3 and 15 meshes.

You won’t be able to knit a fishing screen with your own hands that is too large; most often the dimensions range from 1.5 m2.

Before assembling the fishing screen, it is important to determine the mesh size of the mesh. The dimensions of the cell depend on the size of the expected catch:

2 cm - for live bait and small things;
2.5-3.5 cm – for perch and roach;
4-5 cm – for medium crucian carp and small bream;
12-14 cm – for a large pike.

Making a fishing screen with your own hands:

Advice! You shouldn’t pull the net tightly onto the frame; it’s better to tie it with a little slack, then the fish won’t feel the danger the first time it touches the fishing line.

Tactics and fishing techniques

There are no special secrets to how to use a fishing screen. “TV” is not the fisherman’s main tool, but performs only an auxiliary function: catching live bait on a predator, catching small things to prevent unwanted bites and catching small things to attract predatory fish. The screen also helps catch fish on the ear and is only used as a last resort for catching trophy fish.

How to equip and use the fishing screen:

Elements are tied in the center or along the edges to attract attention: a garland, a bait;
installed on “fish paths” where prey constantly moves;
thrown in the gap between the algae;
hooks along the edges of the screen cannot be used, otherwise there is a high risk of snagging and stuck fish will scare away other peace-loving relatives;
when knitting a mesh, it is better to use a thin fishing line that is invisible to the fish eye;
You should not use wooden sticks as a frame, as they float and you have to install a heavy weight.

There are no special secrets to using the fishing screen

Installation of fishing screen

The most promising fishing places are narrow channels, areas without vegetation on the bottom, places where predators chase fry. This is the best place to install the screen. The casting process itself is extremely simple. If you are using a boat, just swim up to the area and smoothly lower the tackle. In the absence of a floating device, a long and strong stick is used for casting, and the “TV” is also simply lowered with it. A similar method - lowering the screen is carried out from a bridge or other surface structure.

How to properly plant a fishing screen:

We take the shuttle and attach the fishing line to it.
We tie the end of the shuttle to the last cell, and tie the picking cord behind it.
We thread the shuttle every 3.5 cells (selected individually).
We attach the cell to the cord and continue fastening until the entire mesh is tied to the base.

And finally, a few tips:

the tackle is effectively used in the summer, in places where there are no obstacles for installing the screen;
the screen is convenient to use in still water, but in currents the design is not very stable;
It is better to attach the bait in the center of the screen or fix it next to the sinker;
It is worth throwing bait periodically; careless fish will get caught in the net while collecting food;
You cannot overdo it with bait, otherwise the fed fish will swim away;
Some fishermen treat their nets with scents that attract fish from distant parts of the reservoir.

There are very two opinions about fishing “TVs”: some people love them because of the ease of manufacture and the passive method of obtaining a catch, but many people “cannot stand them” because the tackle is not sporty and of little interest. Regardless of opinions, the tackle shows good results, so it will be relevant for a long time.

This unsightly homemade fishing tackle is widely popular among fishermen. People call it a “TV” because it is shaped like a TV screen.

Photo of catching on screen

More often than not, fishing with a screen far from the shore turns out to be more effective.

How to equip and use a fishing screen: elements are tied in the center or along the edges to attract attention: a garland, bait; installed on “fish paths” where prey is constantly moving; cast in the gap between the algae; hooks along the edges of the screen cannot be used, otherwise there is a high risk hooks and stuck fish scare away other peace-loving relatives;

When knitting a mesh, it is better to use a thin fishing line that is invisible to the fish eye; you should not use wooden sticks as a frame, as they float up and you have to install a heavy weight. How to use a fishing screen There are no special secrets Installing a fishing screen The most promising fishing places are narrow channels, areas without vegetation on the bottom, places where predators chase fry.

This is the best place to install the screen. The casting process itself is extremely simple. If a boat is used, it is enough to swim to the area and smoothly lower the tackle. In the absence of a floating device, a long and strong stick is used for casting, and the “TV” is also simply lowered with it. A similar method - lowering the screen is carried out from a bridge or other surface structure.

How to properly fit a fishing screen: Take a shuttle and attach a fishing line to it. We tie the end of the shuttle to the last cell, and tie a selection cord behind it. We thread the shuttle every 3.5 cells (selected individually). We attach a cell to the cord and continue fastening until moment of tying the entire mesh to the base.

And finally, a few tips: the tackle is effectively used in the summer, in places where there are no obstacles for installing the screen; the screen is convenient to use in still water, but in the current the structure is not very stable; it is better to attach the bait in the center of the screen or fix it next to the sinker; periodically If you throw in bait, careless fish will get caught in the net while collecting food;

You can’t overdo it with bait, otherwise the fed fish will swim away; some fishermen treat their nets with flavorings that attract fish from remote areas of the reservoir. There are very two opinions about fishing “TVs”: some people love them because of the ease of manufacture and the passive method of obtaining a catch, but many – they can’t stand it “on spirit”, since the tackle is not sporty and of little interest. Regardless of opinions, the tackle shows good results, so it will be relevant for a long time.

Some fishermen fundamentally fish exclusively with fishing rods for their own pleasure. And others prefer not to strain and use a screen for fishing, which is easy to manufacture and use, and is also inexpensive. From this article you will learn how to make a fishing screen with your own hands, because many fishermen prefer to make a fishing screen with their own hands.

We invite you to read: Review of catchy wobblers for autumn fishing for pike and perch. Photo. Video.

Fishing screens are best installed on reservoirs, ponds, and rivers where there is no current, especially on warm spring and summer days. But this does not mean that you cannot fish this way in winter. There is a so-called fishing scarf, the principle of its manufacture is the same, but it has a triangular shape, which is lowered into the hole and a float is used as a wooden block.

Fishing screen

You can install such gear in two ways:

on open water from a boat or boat;
near the shore, from a bridge, from a dam.

Legality of fishing

Fishermen are fined for using fishing screens. Although this method does not provide for a large catch of fish, as with the help of other gear or nets, the regulatory authorities still strictly monitor the conservation of most species of fish. Sometimes fishermen think that since they have small home-made fishing TVs, this does not concern them.

Screen device

Every real fisherman will sooner or later think about how to make a TV for fishing with his own hands. For this he will need the following materials:

float made of lightweight material (foam);
plastic tube, wooden block (bamboo stick);
mesh fabric;
cargo (metal rods);
fishing line, nylon threads, cord.

Let's take a closer look at the step-by-step instructions on how to make a fishing screen:

Typically the width and length of a fishing TV is 1.5 meters. But depending on the depth of the reservoir, the length of the screen is sometimes increased;
When making the upper part (float), a sealed plastic tube or a flat wooden block coated with waterproof varnish or paint is used;
A weight made of metal rods is used as the lower part so that the screen can be easily lowered to the bottom of the reservoir. Some fishermen additionally attach bait in the center of the screen;
The next step is to prepare the mesh fabric, which should match the size of the frame. The cell sizes of the mesh fabric depend on the purpose and use of such equipment. As a rule, they have sizes from 15 to 50 mm;
The finished mesh fabric is attached to the top and bottom of the frame using a strong nylon thread that passes through each mesh cell. To effectively catch fish, the mesh should be made of thin, high-quality threads so that the screen is not visible in the water, and also should not be pulled too tightly over the metal frame;
On both sides of the upper part of the frame, two nylon or fishing line rods are attached, which smoothly turn into a cord or thick fishing line no smaller than 0.7 mm in size, at the tip of which a foam float is attached, floating on the surface of the water. This is necessary in order to determine the location of the TV and find out whether the fish was caught;
This DIY fishing screen is ready for use. Although such tackle is not durable, it does not cause harm to other fish and does not pollute water resources.

Screen device

Note!

Help the project, share on social networks