Catching rudd in different ways


Rudd fishing differs from other types of fishing in its diversity, prey and special excitement. This not particularly large, but widespread fish inhabits most of the reservoirs of our country and often becomes the object of hunting by fishermen. Perhaps the catch will not be distinguished by the significance of the trophies, because generally individuals of this type of fish in the fisherman’s score lists rarely exceed a mass of 100–150 grams, but the strategies and tactics of fishing themselves are of interest. After all, fish can be caught not only with float tackle, but also successfully caught with a spinning rod, donka and jig, and most importantly, fishing does not stop all year round, including ice-covered reservoirs.

Knowing about habits, eating habits and behavioral characteristics depending on weather conditions, catching a rudd is not particularly difficult. And in the gear for catching fish there is no specific configuration; all of its components are selected from standard fishing accessories available for purchase at any fishing store. Baits known to every angler and simple mixes of bait mixtures also make it easy to catch this graceful fish with its brightly colored fins.

The many nuances of fishing in various ways aimed at catching rudd will be discussed in the entertaining and useful article presented below to the reader.

Where to look for rudd

The wide distribution range of this type of fish has made its fishing no less popular than fishing for bream, roach, crucian carp and bleak. From the western regions of our country to the Siberian rivers, anglers have the opportunity to catch fish. The rudd itself leads a gregarious lifestyle. A flock often consists of many individuals of similar size. Particularly small rudd gather in huge schools that patrol thickets of aquatic vegetation in search of food in the shallow waters of standing reservoirs and reservoirs with low current strength. Large individuals rarely descend to water levels of three meters and also try to stay in the overgrown quiet backwaters of large rivers and lakes.

Important! Favorite places for schools of fish are coastal trees, with their crowns hanging over the water surface, where the fish collect all kinds of insects falling from the branches.

Flowing ponds and creeks covered with duckweed will certainly be populated by this frisky fish, which can be easily identified by its specific slurping sound during feeding. Schools of fish are considered sedentary and spend most of their lives within the same boundaries of the water basin, without migrations or relocations. Becoming larger in size, individuals are divided into smaller groups, which stay away from large schools of small things and become much more careful and timid. The fish definitely do not like currents and promising places both in winter and in open water; they look for them in oxbow lakes, backwaters and reaches with depths of up to four meters and intensive thickets of both underwater and surface plants.

When and where to catch rudd

Rudd does not like currents, so you should always look for it in low-flowing ponds, lakes, oxbow lakes and backwaters. Throughout the warm season, when the water is freed from the shackles of ice, you should look for rudd in shallow water, in thickets of algae and reeds. Often fills windows between thickets of aquatic vegetation. In one such window you can catch more than a dozen of this fish.

Rudd is caught exclusively during daylight hours. It bites throughout the day, without taking a break even at lunchtime. Like the bite of any other fish, the bite of the rudd becomes more active in the morning and evening dawns. Morning dawn is the most catchy period of time when catching rudd.

The rudd collects fallen butterflies and various mosquitoes from the surface of the water, which often reveals its presence. You can often notice how a bug that has fallen into the water is immediately grabbed by “someone” from under the water; one can easily assume that it was a rudd.

Sometimes rudds reveal themselves in the evenings when they grab flying insects from the surface of the water. You can see how their golden sides sparkle, which means it’s clear where you should stop with your fishing rod. From under the wide belt of reeds, rudd are best caught from a boat. I anchor about 15m from the reed beds and cast my baits 1m to the first stems.

The combination of red corn with strawberry flavor (from Pescaviva) and yellow maggots also worked well. Another bait I trust when catching rudd is breadcrumb pieces. The bread crumb is unsurpassed on ponds where passers-by constantly feed the ducks. There is enough bread left for the fish, and they have become accustomed to this extra food.

Catching baits

Since rudd are fish that readily take food from the surface, they can be caught using drifting bread crumbs. It is best to throw a few pieces of bread crumb into the water before fishing while walking along the shore of the reservoir to see if the rudd are interested in the bait.

[THERE IS AN ANSWER] How to properly equip a float rod for crucian carp

If you are interested, use a hook with an attachment made from a piece of bread crumb. A carp controller serves as a casting weight. Rudds swallow midges and other insects from the water surface. Therefore, it would be good to try to catch these “gold bars” with grasshoppers. A water ball will provide the necessary mass for casting here.

Floating baits

When fishing for rudd, the bait should sink very slowly. Therefore, it should be given a little buoyancy. This is best done using artificial maggots, artificial bread and foam rubber. You will need a buoyant body that will allow the bait to float only slowly and balance the mass of the hook.

Critically balanced (balanced almost to neutral buoyancy) is what the British call this bait. So, the hook must sink as slowly as the portions of loose bait, otherwise the rudd will become suspicious. When it comes to making baits buoyant, your imagination knows no bounds. You can take a piece of foam from Ohropax earplugs, plastic maggot or caster (Balzer), a piece of artificial bread crumb (Enterprise Tackle) or foam rubber of various colors.

Most often, buoyancy is adjusted using scissors so that the bait really slowly sinks to the bottom. It is advisable to check in shallow coastal waters whether the desired effect is actually achieved. Floating bait near the float rarely brings bites.

Rudd on a fishing rod in overgrown places - classic fishing

The rudd is very numerous, inhabits many reservoirs that are not poor in oxygen, and is caught by almost all fishermen with a fishing rod. Sometimes it is a passing catch when catching other fish. Sometimes it is caught purposefully, special gear, bait,… are created for catching it. Catching rudd with a fishing rod is interesting and exciting, athletes train on it...

Where and how does the rudd bite?

In open water, active rudd biting begins at the end of April. The fish are caught all day long, and gather very closely in the feeding area.

In large reservoirs with a rich food supply, river mouths, and estuaries, the rudd reaches more or less impressive sizes, and its catches on a float rod can amount to tens of kilograms.

In April - May, rudd are mostly found in shallow water, in places where the water warms up faster. At this time, you need to choose a fishing place with a depth of up to 1 meter, preferably overgrown with “grass”, and it is better to catch rudd from the bottom. In summer, it is preferable to fish at depths of 1 - 2 meters, with the hook placed 0.5 - 1 meter from the ground, although even at this time the rudd can perfectly take not only a floating bait.

Rudd on a fishing rod in overgrown places - classic fishing

The fishing rod should be light

For catching rudd, the most suitable tackle will be a fly rod. It is optimal to choose the following:

  • the length of the rod is 5 - 6 meters, and for wading fishing in weeds - 4 - 5 meters,
  • main line – 0.1 – 0.12 mm,
  • leash – with a diameter of 0.08 mm and a length of 10 cm,
  • float with a load capacity of up to 1.0 grams, for long rods and windy weather - up to 2.5 grams,
  • loading - 2 - 3 weights, hook - under a bloodworm made of thin wire.

With such a light and elegant float, provided it is loaded correctly (only the antenna should be above the water, and the floating body is completely immersed in the water), the slightest bite will be noticeable.

Coloring the floats and selecting the hook

It is necessary to have floats with different colors of antennas, and use them depending on the lighting and fishing conditions. This greatly reduces visual fatigue and makes fishing a complete relaxation. For example,

  • for a dark background of water, a white antenna is good,
  • for a background that glares in the sun - black,
  • for the wave – red-orange.

The hook is used with a straight tip, made from the thinnest wire. The size of the hook rather depends on the type of bait, because the rudd boldly takes large hooks. For bloodworms No. 20, for worms - No. 15, for a slightly smaller dough - No. 16-17. It is recommended to prepare a set of leashes with hooks at home so that you can quickly adapt to the fishing conditions and the mood of the fish.

Rudd is better caught with bait

Fishing for rudd is usually carried out by feeding the place. You can use store-bought bait, but if you have the time and desire to prepare food at home, you can use this simple recipe:

  • 1 part breadcrumbs,
  • 1 part ground sunflower cake (or preferably ground roasted seeds),
  • 0.5 parts ground oat flakes,
  • It’s a good idea to add something dusty and buoyant, at least wheat bran...

You need to add the bait you are using into the bait - bloodworms, chopped worms, pearl barley. It is advisable to flavor the bait; for example, the following flavors work well: strawberry, duchess, coriander, anise. Soil, ground through a sieve and added in small quantities, will change the color of the bait, add turbidity and make the bait more durable.

You can mix the ingredients at home, but you need to moisten the food only with water taken from a reservoir, with a fish-like odor. Bleaching impurities in water are simply unacceptable.

Bait and catch

Various doughs, bread crumbs, bloodworms, worms, and pearl barley work well as attachments. Moreover, it is advisable to use the same flavorings for the test baits that were used to prepare the bait.

[THERE IS AN ANSWER] How to equip a bottom fishing rod with a feeder

To soak bread crumbs, it is better to use water from a pond. To prepare dough and cook various recipes, it is better to use purchased water or water from a spring. Such seemingly trifles have a significant impact on the final catch, and the rudd’s fastidiousness is only apparent.

When fishing, it is very useful to experiment and not settle on one thing. If the bite weakens, try changing the depth and changing baits. It is better to start catching rudd from the bottom, then fish in half the water. It is useful to periodically throw small pinches of food or a few pearl barley into the fishing area. This creates excitement in the school, and the fish takes the bait more confidently. And the rudd will not leave you unattended, and a great mood will come with it.

Constant feeding is a bit of a tedious process. But only a good dose of dusty, dry bait that creates a cloud creates a good stir and the fishing goes on confidently...

You can watch the video “Fishing in the Nizhny Novgorod Region” online in good quality on our website for catching rudd with a float rod in the summer in June on Lake Obukhovo, near the village of Memory of the Paris Commune. Enjoy watching!

You can watch the video “Fishing in the Nizhny Novgorod Region” online in good quality on our website for catching rudd with a float rod in the summer in June on Lake Obukhovo, near the village of Memory of the Paris Commune. Enjoy watching!

Searching for and catching rudd with a float rod in the channels between lakes. In the morning, after feeding the place, we started fishing with a float rod. The bites started right away, but the size of the rudd was not encouraging. After changing many places and giving up bait, we found and began to catch a large rudd.

The equipment must have a leash made of fishing line with a cross-section of 0.12 mm, a hook No. 3-4, with a short fore-end. It is recommended to install the sinker at a distance of 20-25 cm from the hook; if fishing conditions allow, then the distance can be safely increased.

Fishing calendar by season

Rudd fishing is available all year round. The fish feed with varying degrees of activity throughout the year, taking only a short break of one or two weeks during spawning, the season of which occurs at the end of May and beginning of June, when the water warms up to 15–17 degrees.

Important! The peak of successful fishing, when the rudd bite is relatively stable, occurs in the second half of June, July and August.

Reservoirs reach the greatest intensity of overgrowth, and the emergence of many insects contributes to the gathering of flocks in small areas of water in certain places, where they successfully become prey for fishermen. Starting in September, with the water cooling below 15 degrees, the biting activity subsides and the closer to the freeze-up, the fish become capricious and picky about baits, starting to ignore plant components and switch to animal food rich in proteins. By freeze-up, the well-fed flocks reach depths of 1.5-2 meters in areas of sparse thicket and stay on their favorite spots from December to March, waiting out the difficult and hungry winter season.

Fish are caught from the ice only on sunny and not very frosty days, reacting to an increase in pressure, which activates the fish and somehow forces it to move in search of scarce food. As the ice begins to melt, flocks move to thawed areas to find fresh and oxygen-rich streams, where they collect aquatic plankton reviving from hibernation in sun-heated water. In April and May, when the water is heated above 10–12 degrees, the bite begins to increase until the pre-spawning feeding phase, and this is especially clearly felt in backwaters that have warmed up and are beginning to become covered with young aquatic vegetation on the surface. Catching large rudd in the spring is successful using spinning tackle, due to its obvious aggressiveness and the transition to feeding on growing fish juveniles of previously spawned fish species.

Important! Regardless of the season, fish are caught only during daylight hours and, which is quite significant, the bite is present throughout the day with a pronounced intensity at dawn and in the evening.

Sunny weather activates the fish and raises them to the surface of the water. Cloudy weather takes the schools to the mid-water levels and to the bottom layers, where the fisherman needs to look for a successful catch, keeping an eye on the light brightness. Rains do not contribute to the bite, raising the level of reservoirs, thereby washing away soil from the banks and making the water cloudy. Sharp cold snaps and a drop in pressure are also negative for the stability of bites, making the fish passive and less mobile in search of food.

What does the rudd bite on?

Like all carp fish, the rudd is not particularly picky in its diet and its diet includes both plant and animal foods. In fact, the fish is considered a peaceful species, but with age and reaching a mass of over three hundred grams, an individual is not averse to grabbing a fry commensurate with its mouth, which indicates a clear predatory orientation of especially large trophies.

Important! Catching significant trophies with artificial imitations of whitebait, silicone fish, microwobblers, micro-spinning baits and spinners is done using ultra-light spinning tackle.

Otherwise, ordinary-sized fish are taken on common live and plant baits, using their type according to the fishing season.

Important! In cold water, the best results are obtained with animal baits, and in the summer, during the warm water season, they fish for the plant component.

The most promising animal baits include bloodworms, maggots, caddis flies and small dung worms. Insects used for fishing include flies, dragonflies and their larvae, grasshoppers, and all kinds of moths and butterflies. Larger individuals are successfully caught using the cockchafer, especially at the time of its mass emergence. Of the mollusks, zebra mussel meat is used; this is generally the most favorite delicacy of fish in nature, toothless, and small leech sometimes quite successfully maintain the bite.

Of the vegetable baits, canned sweet corn in small grains, boiled pearl barley, and crumbs of white and black bread are especially popular. All kinds of baits based on mixtures of ground vegetable cereals, mastyrka, hominy, and even ordinary dough on water and rye flour with the addition of an attractant attract the fish quite well to the hunting spot. Steamed peas, wheat, oats and barley grains are used during the ripening season of cereals. In mid-May, at the time of rapid growth of green algae, a strand of this substance wound the size of a match head on a hook is also a promising bait for rudd.

Lure

A frisky fish that feeds on the surface and in the depths of the water often does not need additional feeding. After all, life in a huge flock forces any individual to instinctively go to the bait spotted nearby and immediately swallow it, fearing for the loss of a particle of food to a more cunning and arrogant neighbor. Therefore, the fisherman only has to know the location of the school of fish and deliver a bait-equipped rig to this area. But if the angler wants to achieve more significant results in catches than catching small things of 50 grams, then you need to use complementary foods, collecting rudd on a muddy spot in addition to small things and more respectable in size.

Important! Based on the behavior of individuals when feeding, you need to understand that complementary foods should not quickly reach the bottom of the reservoir, but, optimally, create a cloudy spot in the fishing area for a long time with fine dust of edible particles that smoothly settle from the surface to the bottom of the reservoir.

The bait for rudd should be in the feeding spot, as the largest nutritious object in size, which will be grabbed by one of the largest fish.

Important! Groundbaits are prepared as dusty mixtures that are light in weight and small in fraction, which is often achieved by additional grinding and drying of the products used in the mixes.

These feed conditions are achieved using breadcrumbs, ground semolina, milk powder and feed dust. The bases for bait are made from millet porridge or boiled and crushed peas. The mixtures are moistened without bringing the mass to a wet consistency, leaving them semi-dry, crumbly and dusty in the water when casting. Common culinary spices such as vanilla and cinnamon are suitable as attractants. From liquid, concentrated odorous solutions intended for fishing mixtures, the addition of chicory, honey and tutti-frutti is especially effective in gathering a school of fish for casting to the feeding point.

When fish activity is low, especially in late autumn and during ice fishing, small crushed bloodworms and dung worms chopped or cut with scissors into small pieces are used in the bait. When catching live bait, and this fish in many cases is ideal for this role, crusts of fresh bread are thrown into the fishing zone as bait, which, when soaked, gradually settle into the water column, attracting the little things that are so needed at that time in the catch.

What to feed

The bait for rudd is similar in composition to that which is usually used when fishing for roach. It is prepared so that its density allows it to remain in the upper and middle layers of the reservoir for as long as possible. This can be stale wheat bread, previously soaked and passed through a sieve, with the addition of bran and breadcrumbs. Before casting, the bait is formed into small balls. It is also practiced to add maggots, worms, grasshoppers, small snails or crushed dung worms to the bait.

Read more

How to catch a chub using a grasshopper?


It is possible to use purchased ready-made mixtures for rudd, but they all sink in water

How to catch rudd

The variety of ways to catch this fast fish gives fishermen who specialize in float, bottom, winter jig and spinning fishing the opportunity to demonstrate their skills. Every individualist will find his own interesting and entertaining moments both in the technique of performing the hunting method and in the nuances of selecting the necessary equipment and the gear itself. Mounts for small, but cautious and timid trophies require subtlety, miniature and special sensitivity, which is the basis of catching rudd. Even catching rudd with a spinning rod in its ultra-light version is particularly tender even in such a rather pampered form. Further in the course of this article, we will discuss various methods of catching this type of fish using various fishing methods, focusing on the selection of equipment and hunting tactics.

Bait for catching rudd in winter

To feed the fish, you can use a wide variety of options, which may include both specially developed mixtures and simple bread crumbs, occasionally thrown into the hole. To attract rudd, some raise silt and other particles present at the bottom.

In this turbidity, the fisherman begins to look for food, and as a result, many individuals accumulate in one place. A simple and proven way to attract is to use plant mixtures that you prepare yourself.

Fishing with a float rod

The thinnest and lightest fly-type and Bolognese-type fishing rods made of composite materials in a telescopic assembly are suitable for fishing conditions, which do not load the angler’s hand with high weight. Depending on the bait supply distances, fishing rods will be used in 4–9 meter lengths.

Speaking of bologna, its package includes a lightweight, inertia-free reel, without special requirements for traction force, fineness of clutch adjustment and gear ratio. The main thing is low weight and a spool for storing 50 meters of monofilament with a diameter of 0.12 to 0.18 mm. The fly tackle is not equipped with a reel at all, but the fishing line is tightly secured at the very tip of the tackle. The tackle for rudd is equipped with a float of 0.5 or a maximum of 2 grams, such as a waggler with a single mount and a noticeable to the eye, but thin and bright antenna. The sinkers are lead pellets with a slot for clamping the fishing line. For the subtlety of the tackle, I place them scattered along the line, without concentrating them strictly at one point with a garland.

Leashes are used in direct connection with the main fishing line, using a tiny sub-line for sensitivity. The size of the hooks is selected according to the bait in the range of numbers 14–18 based on the generally accepted classification. The fish bites when the float is pulled under the water, without first testing the bait or playing with the bait. When a float sinks, the fisherman hooks the fishing line in the opposite direction and lifts the trophy out of the water using a form. A missed bite can result in the hook getting caught in the baited fishing line in thick algae.

Application of float sbirulino, bombards

Bombarda is one of the newer methods of hunting for trophies, but its technique has already firmly established itself in rudd fishing. The use of a sbirulino float allows you to deliver light baits and lures over considerable distances, which contributes to successful fishing for this timid and noise-suspicious fish, especially if the angler wants to get a solid specimen. Bombards are equipped with a multi-nozzle mounting option, supplying from two to five nozzles to the fishing zone at the same time. This feature requires the presence of long gear, the size of which, when hunting for redfin, is chosen from 3.5 to 4 meters.

Floats are used floating and preferably made of completely transparent material. Diversion leads can be mounted both in front of the bombard and outside its course. The tackle is collected on monofilaments from 0.2 mm in diameter or on thin braided cords no thicker than 0.12 mm. The resistance of the caught fish is not great, and tackle on thin bases is more sensitive and less noticeable to the fish. A bite on sbirulino feels like a short blow at once, requiring a careful hook. Otherwise, the delicate lips of the fish will be torn off.

Fishing without afterburner, on a constantly tensioned cord with the supply of the catch into the landing net. The best time to catch rudd is in the fall, when the aquatic grass leaves. Lures include both artificial species, wobblers, spinners, silicone, and hooks with dung worms and sandwiches of maggots and bloodworms.

Fishing with a feeder

Feeder gear acts as an effective fishing tool for catching rudd in the spring, when in cold and muddy water the fish looks for food closer to the bottom on relatively shallow plateaus in water areas not covered with algae. The thinness and sensitivity of the equipment is provided by picker rods in sizes 3-3.5 meters with a semi-rigid quiver tip and dough up to 30 grams. A miniature, by no means a traction reel, with average transmission mechanism parameters and a small spool, which is filled to the top, throughout its entire volume with a 0.12 mm braided cord in a length of up to one hundred meters, it covers any fishing conditions.

Important! Feeders for installations are made of plastic mesh, light in weight, 15–25 grams. The mesh cell is small, allowing you to charge the crumbly bait for further dusting and creating a cloudy bait column.

An asymmetrical loop is knitted into the equipment, completing the installation itself with a monofilament leash 30–40 cm long, no thicker than 0.12 mm. A spinning rod can be equipped for fishing for rudd under the donk or zakidukha. They take spinning rods that are soft and semi-soft in their blank structure as a basis and equip them according to the principle of the feeder installation described above. The bites on the feeder from fish that are not yet active in the spring are sluggish and the bait is being probed. The constant sluggish trembling of the alarm indicates the time for the same unhurried and smooth cutting. A fish caught on a hook is pulled out by simply winding up a cord with a reel, followed by picking it up near the shore in a landing net, since specimens caught by this method can differ in size and size.

Equipment and catching rudd on a spinning rod

Rudd on a spinning rod is caught in areas of coastal vegetation and reed walls, on the borders of the approach of algae to clean water. For fishing tools, choose ultra-light spinning rods with weights not exceeding 7 grams. According to the ultralight concept, a spinning reel and the thinnest main cord are selected, not exceeding the diameter of 0.08 mm in braided line and 0.2 mm in monofilament. Lures are tied directly to the line, without fasteners or carabiners, which make the tackle rough. For bait they take mini-wobblers, cranks due to their structure and the ability to play independently. The size of a wobbler of 1.5-2 cm in the likeness of a grasshopper or fly is a fairly common option for this type of hunting.

Of the spinners, the preferred ones are rotating ones with drop-shaped silver petals, without any kind of bait. From silicone baits, short but thick worms and something like narrow fry are used. The color of these baits does not play a special role in fishing. Catching rudd on a spinning rod with silicone bait is carried out according to the jig principle, with step-by-step retrieval in the water column. The wobbler is carried out in a twitching style with minimal pauses and distinct jerks, reminiscent of the movement of a water cutter insect along the surface of the water. The rotating spoon is driven in a leisurely monotonous manner. Bites, as when fishing with a bombard, are given by a single blow with a malfunction of the bait, which requires immediate hooking and retrieving the hooked trophy.

Fishing methods and choice of gear for catching rudd

Fishing for rudd can be done in various ways, using various types of gear.

Experienced anglers usually catch this fish on:

  • spinning;
  • popla popper;
  • bombard;
  • feeder;
  • fishing rod;
  • jig.

When choosing gear for rudd, it is necessary to take into account the conditions in which the fishing will take place. A universal rod is a lightweight rod with a sensitive tip, equipped with a short leash and preferably a transparent float so as not to spook wary fish. This gear can be fished at both shallow and medium depths.

  1. Fishing for rudd using a spinning rod is practiced when the fisherman's goal is a large fish. In this case, they take an ordinary spinning rod equipped with a sliding weight or retractable leashes; sometimes especially large prey is caught with a microjig.
  2. The rig with popla popper bait, which is a combined use of poppers and ultralight fishing, was originally intended specifically for catching rudd, but later began to be used for catching other types of fish. It is a small float with a bright color, a thin monofilament leash is attached to the back loop, and small baits are attached to the end of the leash - flies, microspinners and silicone mini-baits. Among the advantages of this gear are the ability to cast bait long distances, attract fish with a quiet splash, and the ability to pull out the gear with minimal risk of snagging on aquatic vegetation.


    Of course, the most popular and simplest tackle for rudd is the most ordinary and well-known float rod

  3. The essence of catching rudd with a bombard is to use a water-filled sbirulino float, which can be thrown along with the bait on a long leash over a fairly long distance. To complete this gear, you need a special fishing rod with guide rings, equipped with an inertia-free reel that can hold 100 m of fishing line with a diameter of 0.18-0.22 mm. Along with artificial baits - flies or spoons, natural ones - worms and maggots can be used.
  4. Since during the spring-summer period rudd rarely descends to a significant depth, catching this fish with a feeder is more often practiced in shallow water. The depth should not exceed 1.5 m. Preliminary feeding is carried out by throwing up to 10 feeders, after which they are replaced with a small feeder and caught using classic feeder fishing tactics.
  5. Catching rudd with a fishing rod is often practiced. The equipment used is a light float tackle - a thin fishing line and a small hook. Particular attention should be paid to the choice of float. A dim, light float that does not attract much attention is ideal for such a case. This could be a piece of foam or a white, undyed goose feather. The main thing is to place the bait near aquatic vegetation when casting, and to remain quiet while fishing. Despite strong bites, the tackle for rudd should be adjusted so that the fish does not immediately feel the resistance of the load, that is, it is more rational to use a sliding sinker.
  6. Catching rudd with a jig can be quite successful both in the summer and in the winter months, since this fish does not hibernate. In this type of fishing, the tackle is equipped with a strong monofilament fishing line, a small bait and a corresponding small hook.

Read more

How to catch catfish from the shore in summer?

Catching rudd in winter

I plan to catch rudd in winter based on sunny and non-frosty days. As a rule, on such a day the fish are active in the first half of the day, ignoring the afternoon supply of bait. Ice hunting is carried out using winter fishing rods using light jigs with one bloodworm or burdock attached to the hook.

It is recommended to first feed the holes with dusty bait, pouring the mixture directly onto the surface of the water of a hole drilled in the ice. The thinnest monofilament of 0.06-0.08 mm is placed on the reel of the fishing rod.

Important! The jigs used are discreet, with a dull surface.

The wary fish avoids clearly shiny objects. Faded silver, the same type of lead and dark copper most attract rudd under the hole. The jig's play is unsharp, without long throws. The animation amplitudes are short and smooth without stopping. If there are no bites, they fish the entire thickness of the water several times, including hitting the bottom with a jig and playing at the very edge of the ice. Due to the strong shyness of the fish, holes are drilled in the dark, feeding at the same time. They catch rudd in open water where they are staying, because the fish does not go far from its usual habitats even in the winter.

Bait for rudd

Having chosen several promising places for fishing, you need to place food on them and start from the first point. At this time, enough fish will appear on the rest so that the bite is stable.

The main advantage of using bait is the increase in the number of fish caught in a short period of time, since they will all accumulate in one place.

Most often, special feeders are used, from which maggots constantly fall out, attracting fish in only one place. Fixing such devices can occur on low-hanging branches of a tree located near water.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]