DIY fisherman's house for winter fishing

Classification

To begin with, let’s just outline the general picture and review the winter fishing rods that are currently used in fishing. Let us immediately clarify that many winter fishing gear can be similar to each other and built on the same types of fishing rods, but, at the same time, differ in equipment, and, as follows from this, in their functional focus.

By fishing directions

Based on the above, we will carry out the initial classification according to fishing directions:

Jig tackle. These ice fishing rods are used to catch predatory and peaceful fish in still or slow-moving water.
Float rods, or floats. They are mainly used in lakes and reservoirs for peaceful fish.
Postavushi. Fishing rods for passive fishing of peaceful and predatory fish in still waters. Unlike floaters, visualization of bites occurs by guards and nods.
Live bait fishing rods, or live bait. Used for active fishing of various predators.
Zherlitsy. A type of live bait for passive fishing. Unlike fishing rods, they do not have a fishing rod as such.
Fishing rods for the current. Specially equipped fishing rods for catching peaceful fish on rivers with medium and strong currents.
Fishing rods for trolling, or lures. Gear for catching predators with artificial bait.

Often anglers give some of the above gear some versatility. This is usually observed among beginners when an insufficient number of fishing rods for winter fishing have been purchased or manufactured, and they are forced to re-equip the existing ones.

Advice! For the convenience of winter fishing, try to have gear for all occasions.

Types of fishing rods

Before moving on to a description of the equipment of the listed fishing rods, it is necessary to describe the types of fishing rods that are, in principle, used for ice fishing. Winter gear is built on the basis of the following common fishing rods:

Balalaikas. This is the name given to fishing rods in which the reel and handle are one piece. To wind the fishing line onto the bobbin, you need to unscrew the safety screw and remove the spool. In this case, the fishing line is first threaded into the entrance hole from the outside, then tied to the reel. After installing the spool into the reel, the final winding of the fishing line occurs.

Fishing rods with handles and legs. These are the most common types of fishing rods for winter fishing. They differ in the design and size of the reels and overall dimensions, which allows them to be used in different types of gear.

Fishing rod for trolling, or lure. Of course, there is a lot of fishing gear for winter fishing, including those you can use to shine. They can be built on a previous model of fishing rod, but for serious fishing for pike perch or large pike, it is better to have a special tool. Most often this is a form short to 70 centimeters, which is equipped with a large inertial, small inertial or multiplier reel.

Other types of winter fishing rods, although they have external features, can be classified in one of the listed groups in terms of functionality. The exception is girders, which do not have a fishing rod at all, and therefore are not considered in this chapter.

Transportation and storage of the house

For transportation, the “building” is folded into a “pancake” measuring 180x130x15 cm. For this purpose, you only need to remove the spacers. The weight of the house is about 20 kg, and it can be easy to lower it onto the roof of a car yourself.

In this case, the structure must be dragged over a significant distance across a body of water; it does not necessarily need to be loaded onto a car; you can use skis. Only when folded, the house can be easily stored in the garage, also called a shed. But if there is neither one nor the other, and the square footage of the apartment is small, then even such a compact thing causes certain inconvenience. There is an option to get out of this situation by making a house of a similar design, but not with a solid floor, but with a folding floor made from several pieces of plywood connected to each other with hinges. Only when folded does it look like a box that can easily be placed in the trunk of a car.

When in good working order, the house is identical to the first option, but disassembling takes a little more time: 15 – 20 minutes. Of course, it will be enough to come up with options for a collapsible bottom after some time, to achieve the desired size. a folding house for winter fishing using other technologies. The video shows the assembly of a house consisting of 6 foam panels: a floor, 4 walls and a roof. The design is as ordinary as possible, and it completely protects the fisherman from the cold.

Safety in summer

When fishing, sometimes unpleasant or even dangerous situations occur that can threaten health and life. It's better to think about your safety in advance

I’ll tell you in more detail what experienced fishermen advise to pay special attention to

Unfamiliar bottom topography. When fishing, sometimes you have to go into the water: you need to pull out a large fish or free a hook caught in a snag. There may be a hole at the bottom - it’s easy to trip and lose your balance. Inability to swim and panic can take their toll: people often drown in places where it seems impossible to drown.

Steep shore. Loose or sandy soil combined with the weight of the fisherman himself can cause a landslide, especially if a large fish is hooked and the person exerts effort. It is also dangerous to fish from a clay cliff, especially after rain: it is easy to slip.

Fishing from a boat. It is always worth remembering the weight distribution: if you put all your things at one end and sit there or lean over the edge, the boat may simply capsize. If you are not a good swimmer, wear a life jacket. In any case, he must be in the boat, otherwise he will be fined. A fall can end in tragedy even for a good swimmer. Imagine the scene: a fisherman falls, the boat capsizes and hits him on the head. You'll be lucky if the boat is rubber. A running engine is even more dangerous - it can seriously injure you.

Darkness. The bite is usually best in the early morning - before dawn, but for beginners it is better not to fish at night, especially from a boat: in the dark you can run into a snag and pierce it, and simply get lost. When fishing at night, especially from a boat and on large bodies of water, be sure to use a flashlight: it will be a signal for other fishermen and large vessels, this will help avoid collisions. Signal lights are also required.

Transportation and storage of the house

When in good working order, the house is identical to the first option, but disassembling takes a little more time: 15 – 20 minutes. Of course, it will be enough to come up with options for a collapsible bottom after some time, to achieve the desired size. a folding house for winter fishing using other technologies. The video shows the assembly of a house consisting of 6 foam panels: a floor, 4 walls and a roof. The design is as ordinary as possible, and it completely protects the fisherman from the cold.

Self-cutter

A rod with a self-hook is more a necessity than a luxury in winter. It is very difficult to sit motionless in the cold for a long time, and you often have to get up and warm yourself with tea. And of course, it can be very disappointing when the bite starts right at this moment, and you don’t have time to hook the fish. It was for such cases that a device was invented that automatically responds to the slightest bite, which has become an indispensable assistant for many fishermen (Figure 8).

Figure 8. “Factory” version of a winter fishing rod with a self-hooking hook

Some people believe that using such a device ruins the romance of winter fishing. In such cases, you can simply switch the fishing rod to manual mode and fish in the usual way, waiting for the bite yourself. And use the automatic mode when you have to leave the hole.

There are several types of structures for undercutting, but we will consider the simplest of them.

This option is mounted on a regular piece of plywood, which serves as the base for the entire structure. It’s not difficult to make if you have the right materials and tools.

For production you will need:

A piece of plywood or a wooden board with a thickness of 20 mm and an area of 30x10 cm;
Reel, lines, float and hook and weight;
Spring, or thin wire for its manufacture;
Thick wire for levers;
Brackets for attaching the lever.

Draw a design diagram on the board.

At one end we screw brackets to attach the lever. We make a lever from thick wire, bending it according to the diagram. We wind a thin wire or spring onto it. We attach the lever with the spring to the plywood (Figure 9).

We bend the locking bracket from the same thick wire and fasten it in the part opposite to the lever. We attach a piece of elastic to the top of the locking bracket. If desired, it can be strengthened and marked with electrical tape.

Figure 9. One of the stages of manufacturing a self-cutting device

We attach the reel and hanging hook to the wooden base.

Having wound the fishing line, we pass it through the suspension and along the top of the rubber tip of the locking bracket. Next, all that remains is to adjust the tension and spring lever.

With the operating principle of a mousetrap

First, cut a small hole in the back of the plywood. This is necessary to secure the device on ice. A sharpened peg is driven into the hole, and you don’t have to be afraid that a large fish will drag the fishing rod away.

Stepping back a little from the hole, a spring with a long rod, similar to those installed in mousetraps, is attached to the board.

Figure 10. Options for a homemade self-undercutter

At the long end of the spring (on the rod) we attach a clamp cut from a piece of rubber. We wind the end of the fishing line around it.

A wood plate trigger is attached to the front of the plywood. A small hole is drilled in the top of the plate to accommodate the end of the spring rod.

The equipment is attached.

Before installing the trigger and spring, it is important to try them on and adjust them to size. Algorithm for triggering the device:

Algorithm for triggering the device:

The fish swallows the bait and pulls it;
The line is tensioned, the latch pushes the trigger and releases the end of the spring;
The rod straightens and performs a sweep.

Despite the obvious benefits, the hooking device has several disadvantages: even a properly constructed trap is quite bulky, and it is difficult to regulate its force and the sharpness of the hook.

As you can see, making a winter fishing rod is not at all difficult. All the necessary materials are easy to find in the store and workshop. So go for it! May your work please you and bring you only a generous catch!

”

How to make a folding fisherman's house

When making a house for comfortable fishing, construction can take a long time, but the warm summer season is enough for the most leisurely craftsmen. The main criterion is the quality of the design, its comfort, speed of assembly and disassembly, as well as ease of transportation.

Blueprints

Designing a future structure is an important moment in preparing the construction of a structure. All parts must be drawn on paper - the drawings must indicate fastening methods, details of the movable base and frame.

It is important to calculate the dimensions of the structure, taking into account the transportation methods (trailer, car roof, etc.). Knowing the dimensions of the future structure, you can calculate the amount of materials required. Drawings of folding furniture will also help to make high-quality interior arrangements of the house.

Sometimes winter fishing houses are used in inclement weather in spring, summer and autumn, installing them on boats and catamarans. To do this, you need to consider the option of using a house without a floor - the assembled structure must be stable. The design of the shelter provides for ways to attach it to a summer flotation device.

Materials

Light materials are used for the fisherman's house. The frame under the floor (for the runners or wheels) is made of aluminum or other durable materials. The flooring must be rigid - made of plywood (grade SFK or FK, 6 mm thick), boards, etc. The frame of the shelter is made of wooden beams, aluminum or duralumin profiles.

Manufacturing Features

We should start with the fact that for any fishing it is important to choose the right type of fishing rod. And for winter, this will almost be the key to success.

To start making homemade fishing models, you need to decide what kind of fish the rod is intended for. We should not forget that for such a device the following will be important:

good functionality;
convenience;
small mass.

The design of a winter fishing rod should be such that it does not misfire during the fishing process. For example, for this reason you should not make a plastic whip, because it can easily burst. In general, all models of such devices consist of the following basic elements:

handles;
reels or reels;
whip or fishing rod.

If a model is being made for fishing with a jig, then there must still be a nod there. Its presence is not necessary for trolling, but it can be used if a light bait was chosen and the bite is not too active. The winter fishing rod itself is a short fishing rod, the length of which does not exceed 30 centimeters, equipped with a reel with fishing line or a small inertial reel.

It must have legs for mounting on ice and a handle made of materials that will make it possible to isolate the cold elements of the device. It is best when the handles are made of foam or cork.

It should be remembered that winter gear is usually used in severe frost, often with mittens or gloves. Therefore, the device must be simple and reliable, because setting it up, much less repairing it in the cold, is not the easiest or most convenient thing. So the selection of materials will be extremely important for the successful use of such a device in winter.

But the reason for independently creating such a device can be called:

desire to save money;
the opportunity to make something yourself;
There was no model suitable for the fisherman in the store.

House design

Homemade shelters can be:

lightweight and foldable (often on skids);
mobile, but not collapsible;
massive, like a trailer, with all the amenities: kitchen, bedroom and bathroom.

Common to all designs is the installation of holes in the floor of the house for holes and a base under the floor, with the help of which the shelter can be transported to a reservoir and over ice. Aluminum skis or wheels are used for transportation. The floor can be made solid or folding - from four parts.

The frames of the house are made of stable supports, all connections are collapsible. The walls are sheathed with different materials (massive models can have thick walls), but in all options they give preference to light finishes. The two end walls are made transparent using appropriate materials. The roof can also be transparent.

Network installation methods

Installing networks in winter, under ice, is a very labor-intensive task. A mine is cut in the ice with an ice pick, and holes are drilled from it in a line at a distance of 2–3 m from one another. Then a pole with a rope tied to its end is lowered into the lane (the length of the pole is 0.5–0.8 m greater than the distance between the holes) and pulled with a hook from one hole to another. Then the rope stretched under the ice is tied to the top rope, and the net is pulled under the ice. In shallow water, in no case should the floating cord be allowed to touch the lower edge of the ice or be close to it - in severe frost, the ice thickness increases up to 10 cm per day, and you can lose frozen gear, or pick it up only in the spring, filled with spoiled fish.

But sometimes you still have to fish at shallow depths, especially in the first ice, before the fish slide into deep wintering holes. In this case, it is useful to measure the depth of the reservoir (not only at the ends of the established order of networks, but at several points along its length, so as not to accidentally land on an underwater hump). Then, if the fishing is not supposed to be one-day fishing, you need to calculate the approximate increase in ice using the data in the table. 4. The numbers indicated there are quite approximate: for example, muddy or brackish water freezes worse than clean and fresh water, and, accordingly, the increase in ice thickness occurs more slowly; Other factors also have a great influence: the depth of the reservoir, the strength of the current, the thickness of the snow cover, etc. We can assume that the table shows the maximum values - under conditions most favorable for water freezing.

Table 4. Estimated increase in ice thickness

If, as a result of calculations, it turns out that the nets will fall into the “risk zone” after some time, the fishing period should be limited. However, predicting air temperature is quite difficult even for meteorologists...

There is an old way to protect networks from freezing. Here's what: along the entire length of the net (or in that section of it that falls on the elevation of the bottom), small additional floats are not very often tied to the upper selection of the net on streamers made of thin thread 25–30 cm long. When, when sampling the net, it turns out that these The floats are frozen into the ice and the lines are torn, so the fishing location needs to be changed.

On rivers, sometimes they do not drill a chain of holes, but use the force of the current to stretch a rope under the ice, tying a buoy to it (a large piece of foam plastic, an empty plastic bottle, etc.). This method is especially convenient in first-ice conditions, in places with thin and fairly transparent ice, through which the buoy is clearly visible. However, closer to the middle of winter, most fish avoid the current, accumulating in quiet-water holes.

For safety reasons, after finishing fishing, it is necessary to fence off the lanes with clearly visible poles - they are cut in a fairly large size, and, sprinkled with snow, can provide another fisherman or a person who accidentally goes out on the ice with an unplanned water procedure.

The development of science and technology has not bypassed the very labor-intensive process of installing networks under the ice. But, alas, progress in this matter occurred anywhere, but not in our country. Only in recent years have all sorts of more or less ingenious devices begun to appear in Russia, designed to make the work of lovers of winter net fishing easier.

Among them there are also very intricate ones. For example, something like a miniature electric submarine - tied on a long cord, such a “submarine” floats in wide circles around a hole (at the very bottom surface of the ice) until the cord catches on a wire hook lowered into another hole. After that, stretching the net between the holes is not difficult.

It is much easier to use the “cuttlefish” winch described above in the section on sweeps.

The Chinese-made winch, nicknamed the “torpedo,” has a similar operating principle to the “cuttlefish.” It really looks like a half-meter-long metal torpedo with two gears on its sides. The “torpedo” operates electrically, using batteries, and, according to the manufacturer, their capacity is enough to stretch the cord under the ice over a distance of 1.5 kilometers.

The second advantage of the “torpedo” is that it does not require cutting out a large lane; the device can be lowered into a regular hole. True, a net with a large catch cannot be pulled through it, but for catching with nets you can do without a saw. The third plus is the price; a “torpedo” costs less than a branded Finnish winch.

However, as already mentioned, the more complex the equipment, the more likely it is to break down. Especially when it comes to Chinese-made equipment.

This text is an introductory fragment.

Self-propelled fishing house for winter fishing

Review
Characteristics
Reviews

You can make a cozy and warm mobile fishing house for winter fishing on caterpillar tracks with your own hands, you can rent it for a day or rent it for a few days, or you can buy it if it’s mobile, inexpensive and always “at hand.” I loaded it onto a car passenger trailer, into which, moreover, it could drive under its own power, and went to the winter fishing spot on a river or lake.

Making a homemade fishing house with your own hands is a troublesome and unprofitable task, unless, of course, we are talking about savings, but about the immediate pleasure of the creation process. Buying a fisherman's house ready-made is much easier and cheaper, especially when it is insulated, neatly finished, equipped with an internal combustion engine and is able to move independently to the fishing spot.

A self-propelled fishing house for winter fishing is the dream of any avid fisherman. You can live in it autonomously and fish for several days in a row, without leaving the hole. In addition, at any time, having “reeled in your fishing rods”, you can move to any other winter fishing spot located several kilometers away. The Egoza caterpillar drive will ensure good maneuverability of the structure on snow and ice.

Small external dimensions do not mean that the internal space is not enough for comfortable living. The portable version is inferior to the mobile one, if only because the self-propelled version on tracks will itself deliver the fisherman, equipment and tackle to the fishing spot, and back, if he’s lucky, the fisherman will bring his catch in it across the snow cover and icy surface of the reservoir.

A mobile fishing house for winter fishing is the best option for a fisherman. The self-propelled house on Egoza tracks has an impressive ground clearance (30 cm), 4 forward and 1 reverse speeds, a Chinese 15 hp gasoline engine, with which it moves at speeds of up to 15 km/h. Thanks to two 380 mm wide tracks, it creates minimal (0.11 kgf/cm²) movement on the surface.

Every fisherman who cannot imagine his life without fishing in the winter will want to buy a comfortable, mobile, self-propelled fishing house. In Russian frosts, the caterpillar house will become a real mansion on the ice, which you will never want to part with. In this case, price does not play any role, especially for those who live nearby or on the shore of a reservoir.

In the standard version of "Emelya", the mobile fisherman's house is made of metal. The structure has windows and a door, an exhaust hood and two hatches in the floor for fishing directly from the inside. One hatch is used for winter fishing, the second is for a hole intended for feeding fish. To prevent the flow of cold air from flowing inside and cooling the room, each hatch is equipped with a canvas “skirt”.

By default, the self-propelled fishing house is insulated with 30 mm thick foam plastic. The total thickness of each of the four walls, the gable roof and the sandwich-type metal floor is 42 mm. The interior finishing is made of fiberboard. An exhaust hood is provided. The interior consists of two benches and a stand with two control levers, inside of which there is a four-stroke engine with a volume of 420 cm³.

Outside (to the left and right of the front door) there are two stands that can be used to secure gas cylinders, a locker for storing and transporting useful items, or a box that serves as an outdoor refrigerator. To heat the interior space, the Emelya fisherman's house can be equipped with a potbelly stove or a gas stove, as well as a gas stove.

You can buy a mobile fishing house either in a basic version or with individual wishes, which include: wall thickness, type of insulation, interior decoration and interior layout, as well as any other possible design changes previously agreed upon with the manufacturer. However, it is worth considering that the price in this case will increase more.

A standard winter fisherman's house on caterpillar tracks, with external dimensions of 2500×1500×2200 mm (L×W×H), weighs 320 kg. The production of mobile structures for winter fishing is carried out exclusively to order, only after making an advance payment of 50% or 100% to the company’s account. Delivery is carried out by our own delivery service, or with the help of commercial transport companies.

The difference between fishing on a river and a lake

Fishing on a river in winter is different from fishing in still water. There are more bites from large fish in the current. If you fish at great depths, then the length of the fishing line will be greater than the depth of the river - an adjustment for the current. Also, the line will be positioned level with the bait, and not above it, so the game with the bait will be completely different. Beginner fishermen should take this into account. During the current, the bait must be placed under the fish’s nose and encouraged to bite.

There are fish that test a fisherman's strength. So, for example, fishing for burbot in winter occurs during the most transitional period. Strong wind, snow and rain, in this weather, the burbot becomes more active. It’s not for nothing that they call it the freshwater devil.

The peculiarities of national fishing in winter are the constant overcoming of difficulties, extreme weather conditions, everything that characterizes real men. And these are fishing jokes, without which it would be impossible to understand the Russian character. Watch the video:

https://youtube.com/watch?v=hw1p_A9CsU0

Some anglers spend a lot of time in the cold, sometimes every day. To protect them from the cold and wind, they make small temporary buildings. A fisherman's house is the best solution for a comfortable stay on a long winter fishing trip.

Advantages and disadvantages

In Europe and the USA, people accustomed to comfort often resort to the help of such structures. In Russia, homemade houses also began to appear. On the ice of the lake located next to the village, you can see small structures placed on skis or simply dragged by a snowmobile.

It is more difficult to organize a cozy fishing trip for city residents. The house, although small, has nowhere to store it and nothing to deliver it with. Still, there is a way out for city dwellers: you need to build a collapsible structure, the parts of which will fit in the trunk of a car, and upon arrival at the place, assemble them into a life-saving house that will protect from the chilly wind, and if you install a stove-stove, it will warm you up in the cold.

What are the advantages of a house for winter fishing, and is it really necessary? Let’s try to understand this issue. Let's start with the positive points:

the house will save the fisherman from hypothermia and keep him healthy;
there is no need to leave it while fishing, the holes are organized directly in the floor;
if you install a stove-stove, you can warm up, boil a kettle, drink tea and warm up freezing holes with boiling water;
you can stay overnight in a house equipped with a stove and a sunbed;
the structure, mounted on skis or wheels, moves easily on ice;
thanks to the house, the fisherman will stay fishing much longer than he could withstand in the open space;
even a sharp deterioration in the weather will not cause an escape from the reservoir.

Now let's talk about the disadvantages. There are not many of them, but they are significant.

To purchase a house, you will have to invest in the purchase or material for its manufacture.
Even when disassembled, there are difficulties in storage and transportation. The design details will displace the rest of the equipment.
The house has a certain weight, especially if it is designed for 2-3 people, which means that not every ice can support it.

The thickness of the ice must be taken into account; it must have the following parameters:

10 cm – for a load of 100 kg while on a fresh body of water;
15 cm – for a load of 100 kg while in salt water;
30-40 cm - for staying with a car and a house with a total load of 6 tons.

House for winter fishing

Winter fishing is an extreme activity: frost, high humidity, piercing wind blowing across the expanses of the reservoir, frozen fishing line, which you have to untangle only with your bare hands. Not everyone can withstand such tests.

But there are other conditions: a cozy, warm house located directly above the hole, a kettle warming up on the stove, and even beds.
Accustomed to steadfastly enduring all hardships and hardships, fishermen of the old school can snort contemptuously: they say, these are not our methods, what pleasure is there in such fishing? But there are also quite a few adherents of comfort. A tent can be called a transitional step to “warm” fishing, but it has a number of significant disadvantages.
In strong winds it has to be further strengthened; when it thaws, water sloshes under your feet. And, most importantly, the tent cannot be quickly moved to a hole located some ten meters away. A winter fishing house is free of these shortcomings.

Overview of the winter house

The invention of mobile houses is claimed by the Americans, but such devices have long been in use among residents of our villages located in close proximity to water bodies.

Homemade structures come in a wide variety: from lightweight plywood houses on skids, designed to be moved by hand, to massive, well-equipped structures in which you can spend several days on the pond.

But what about residents of megacities who simply have nowhere to keep such a house? And it is not designed for long journeys. There is a solution: you can make a folding house for winter fishing with your own hands.

Handicraftsmen make various versions of houses, both for themselves and to order. This is what one of them looks like.

The base is a plywood sheet of the FK or SFK brand, 6 mm thick and 180x130 cm in size (of course, the dimensions may be different). This is the floor of the future “cottage”. Ski racks are attached to the bottom, providing a clearance of 25 cm, and the skis themselves are attached to them. All connections are hinged, which allows you to quickly disassemble and assemble the structure.
In addition, the racks provide the ability to install the house above the hole in a raised or lowered position. The choice of position depends on weather conditions. Access to the holes is provided through hatches in the floor. The frame for the walls, roof and door is made of wooden blocks, treated with an antiseptic and painted to protect against moisture.
All connections are also made on hinges. Spacers are installed along the perimeter of the roof and the ridge. Then the whole thing is covered with thick fabric, and the end walls are covered with transparent polycarbonate for lighting. The mobile house for winter fishing is ready. All that remains is to equip it inside. The collapsible table, bench and chairs are made of plywood.
When folded, they are small in size and easy to transport.

Potbelly stove in the house

A small stove-stove, powered by wood or diesel fuel, will complement the “interior”. Hot water is useful for more than just making tea. It is convenient for her to melt ice in freezing holes. The house can accommodate up to 3 people at the same time, and one of them is provided with a sleeping place.

Transportation and storage of the house

For transportation, the “building” is folded into a “pancake” measuring 180x130x15 cm. To do this, you just need to remove the spacers. The weight of the house is about 20 kg, and even alone it is not difficult to load it onto the roof of a car.

If the structure needs to be dragged over a considerable distance across a body of water, it does not have to be loaded onto a car, but you can use skis. When folded, the house can be easily stored in a garage or shed.
However, if there is neither one nor the other, and the square footage of the apartment is small, then even such a small item can cause some inconvenience.
You can get out of this situation by making a house of a similar design, but not with a solid floor, but with a folding floor made from several pieces of plywood connected with hinges. When folded, it is a box that can easily fit in the trunk of a car.
In working condition, the house is similar to the first option, but disassembly takes a little more time: 15 - 20 minutes. You can come up with quite a lot of options for a collapsible bottom and, in the end, achieve the desired size.
A folding house for winter fishing can be made using other technologies. The video shows the assembly of a house consisting of 6 foam panels: a floor, four walls and a roof.

The design is extremely simple, but it can also protect the fisherman from the cold.

Fishing house

Every year the ranks of fans of this holiday are constantly growing. The secrets of winter fishing lie in the special excitement that makes you forget about the frost. Of course, such fishing exists in both Europe and America, but this is a completely different matter. People get comfortable there. They go out with families, sit comfortably on the ice, and have a bunch of technical innovations in their arsenal.

New devices for comfortable relaxation are constantly appearing, an electronic fishing rod, an underwater video camera, and how about a theme – a house for winter fishing, although the theme is not so new. This design can be placed directly on the ice of a frozen reservoir and fish in comfort. This ice fishing house does not need to be removed every time; it can be moved if necessary. Or, on the contrary, a high-quality stationary structure is built, designed for several days of fishing with all imaginable and inconceivable amenities.

Western architects have long thought of this and offer such options for houses.

Norwegian

A Norwegian house consisting of a wooden frame with a metal mesh stretched between it. This grid is watered with water from a reservoir and freezes, creating ice walls. Such a house will protect from the wind. If you look at it, it is not only a shelter, but also an art object. It has no bottom and is installed directly on the ice.

American

American fishermen from Minnesota install such houses directly on the ice of the lake. And not just one, but several. The houses have lighting, wooden floors, a microwave and a conventional oven, and a music system. In a word, all the amenities.

This is how the holes are drilled in the floor

In general, foreigners have a different way of thinking. They perceive winter fishing as fun and bring a lot of creativity into this process. For example, they build houses for winter fishing in the form of various shapes.

Or they come up with super machines that have everything.

Russian

How are things going with ours? National fishing in winter also takes place in such houses for some fishermen. It must be said that demand creates supply. For example, there is a mobile house equipped with a sofa and storage space. There are holes in the floor for holes that are covered with lids. Heat is provided by polycarbonate covered with plywood. This house stands on aluminum skis and can be attached to any vehicle.

Rating of winter tents up to 5000 rubles

Such tents do not have a high-quality frame or material. The degree of moisture resistance of the awning is no more than 2000 mm. The design will not be able to save a fisherman in open areas from strong gusts of wind and precipitation. When choosing, it is also worth considering that the tents are not equipped with additional equipment.

Here is the list, broken down by properties:

company name;
photo;
characteristics;
advantages;
flaws.

Go!

Condor WDT1515K5

Automatic model. The design unfolds quickly and easily. Frame made of metal plates. The awning is nylon adapted to low temperatures. Silicone impregnation is also present. High-quality and budget option. Requires high-quality drying after fishing.

quickly folds and dismantles;
The kit includes a backpack for the tent;
high-quality frame;
Doesn't take up much space when folded, lightweight.
The set does not include screws for fastenings.

I like1

Helios Delta yellow

The tent is comfortable and lightweight. The shape is gable. Capacity – 2 people. The frame is fiberglass. The corners are reinforced with special pockets made of webbing and fabric inserts. Awning – polyester. There are loops for securing guy ropes. There is ventilation.

high-quality frame and connections;
ventilation that prevents precipitation;
wide skirt with stretch eyelets;
there are screws, guy wires;
light weight and size.
screwdrivers are not of high quality.

I like

Double tent. It provides good protection from strong winds and frost. The awning is a three-layer fabric, windproof nylon. The frame is umbrella type, quickly disassembled, semi-automatic. The frame consists of durable aluminum-duralumin rods. There is a ventilation valve. There is a snow skirt made of waterproof fabric.

design resistant to strong gusts of wind;
durable and high-quality frame;
ventilation;
quick installation and dismantling;
light weight;
The kit includes a case.
there is no internal bottom;
The locks at the entrance are not of good quality.

I like

The capacity of the tent is two people. The frame is made of stable fiberglass arches. The awning is wind-resistant, made of polyester. The tent is quickly assembled and dismantled.

there is a snow skirt;
ventilation window;
light weight;
compactness;
quick installation and dismantling;
resistance to strong gusts of wind.
no artificial bottom;
minimal protection from moisture.

I like

Selection of gear for winter roach fishing

Since large specimens are not caught so often, you can purchase the simplest fishing rod for fishing with a jig or with a float. If the hook mainly catches small roach (no more than 200 g), any fishing rod with a reel and reel is suitable for fishing. However, if you decide to get serious about winter fishing, it is better to get high-quality branded gear. Since they are more durable, it will be possible to catch heavier fish without damaging it.

For catching roach with float tackle or jigs, a fishing line with a diameter of 0.08-12 mm is suitable, which will support fish weighing 150-200 grams. However, when the depth of the reservoir is large enough, the fish behaves very actively, and not only small fish are caught, but also larger fish (300-500 g), it is better to change the fishing line to a thicker one. In this case, take a vein with a diameter of 0.14-0.16 or even 0.18 mm. The fishing rod must be equipped with a long nod (4-7 cm or more)

This is very important, as it ensures a smooth motion of the jig in the water, which the roach really likes, and it readily bites on it.

Don't forget about the float. If you intend to fish for roach in still water or areas with weak currents, it can be quite light (about 0.5 grams). If the current is more intense, take a heavier float. Tie the float to the fishing line, attach a few shot balls just below, step back about 10 cm and attach a small hook to the end of the fishing line. The gear for ice fishing for roach is ready.

Overview of the winter house.

The invention of mobile houses is appropriated by the Americans; unfortunately, such devices have long been in use among the inhabitants of our villages located in close proximity to bodies of water. Homemade structures come in a wide variety: from lightweight plywood houses on runners, designed to be moved manually, to powerful, well-equipped structures, where you can spend several days on a pond.

But what should residents of large cities do, who simply have nowhere to keep a similar house? In addition, it is not designed for long journeys. The solution is of course: you can make a folding house for winter fishing

. When disassembled, it takes up space at the cinema level, is transported on the roof or in the trunk of a car, and is assembled in the area in a matter of minutes. Handicraftsmen make different versions of houses, either for themselves or to order. This is what one of them looks like.

The base contains a plywood sheet of the FK or SFK brand, 6 mm wide and 180x130 cm in size (this, there are other sizes). This is the floor of the future “cottage”. Ski racks are attached to it from below, providing 25 cm of ground clearance, and here are the skis themselves. What remains for our client to do is to make connections on hinges, which allows the structure to be quickly disassembled and assembled. In addition, the racks provide the opportunity to install a house

above the hole in an elevated or lowered position. The choice of position depends on weather conditions. Access to the holes is provided through hatches in the floor.