Catching perch with a vibrotail: the best types and fishing techniques

Catching perch with a vibrating tail is a real adventure both for a young angler just starting out and for an experienced fan of sport fishing with a spinning rod.

The thing is that this bait is rightfully considered by many amateurs and professionals to be the best, or one of the best, among all other silicone products designed to attract the attention of river predators.

Perch is a very common fish everywhere; it actively hunts for those it can catch up with and, due to its superior size, swallow. Such fish undoubtedly include bleak.

It was in the shape of this unfortunate victim of circumstances that this specimen was created, which received its name for its endlessly dangling tail from side to side, thereby attracting considerable attention from a voracious pack of dangerous red-finned and striped freshwater flayers.

What is a vibrotail

Catching perch with a vibrating tail is an excellent idea for those who have already tried, it would seem, everything possible and for those who are just picking up the first rod in their life in their trembling hands. And with an awkward movement he tries to cast the fishing line as far as possible, equipped with state-of-the-art gear, which without any doubt includes the hero of today’s article.

This gear is the last word in the world of all kinds of fishing gadgets and other cunning inventions, designed to leave the tyrants of freshwater bodies with less chance, because what goes around comes around. Perch eats its own kind, and people eat it - a natural food cycle in nature, don’t you find a quite perceptible and even tangible connection in this?

The key point in this bait is, as you might guess from the name, the tail. It can be different: different shapes, colors, with and without notches, large and not very large, playing and static, in general - it is different, but each time it is quite effective and attractive not only for the large-mouthed swallow, which is the striped humpback, but also for other no less eternally hungry troglodytes, terrifying the more peaceful river swimmers.

The tail is crowned with a so-called snout. It comes in different sizes and shapes. Basically, it is made in the form of an oval, which is so ardently followed by a hungry humpback whale, not burdened with intelligence. Sometimes, in the center of this heel there is a certain notch, which in unknown ways makes the bait itself even more valuable and tasty for predators.

The body of the product itself becomes more interesting for the target prey if it is equipped with notches - notches, which make the bait itself even more alive, real, natural in the eyes of deep-sea hunters.

Large tails perform better in still water, while their smaller counterparts excel in fast rivers, mountain currents, and so on. But in our case, what will be more relevant is not the potential catch in the form of overfed mountain trout, but the hunt for equally well-fed humpback salmon in lakes and rivers with a much calmer current.

So products equipped with large tails and thick snouts are what we simply vitally need in order to overcome the powerlessness of all other baits.

Don’t forget that this bait behaves like a real living creature, and all a novice lover of active outdoor activities needs to do is wield a rod and reel, and pull the line to the shore or boat in time.

A more experienced person can strengthen an already weak thing with his clever tricks, known only to him alone. However, even without this, the “piglet” is able to guarantee its lucky owner a mandatory catch, even if not a huge one (in the case of beginners).

What is a vibrotail?

Content

Increasingly, spinning anglers are using artificial baits called vibrotails. This is a unique bait made in the shape of a small fish with a flat tail. Users note the effectiveness and affordable cost of the products. As a rule, the product is made of materials such as plastic, silicone and other polymer materials.

It is important that the bait is elastic, soft and retains its properties in cold water. Many manufacturers enhance the effect of bait by impregnating the surface of the product with flavors and other compounds. The main feature of the device is its unique tail, which comes in different sizes, shapes and angles. To achieve maximum effect, the correct wiring should be carried out, and an excellent catch is guaranteed.

Artificial baits are increasingly used by spinning anglers

Types of vibrotails

When discussing the presence of varieties of this gear, one should be aware that this unambiguous concept means differences based on the target species of predator, the prey that will be hunted. For pike, of course, one type of vibrotail will be relevant, but for our beloved perch - a completely different type, of course, much smaller in size, but many times more nimble, fast and agile.

As noted above, predators like it when there are notches and notches on the body of the tackle. They make the overall appearance of the product more believable, alive and real. Moreover, a toy equipped with such delights is also capable of moving more naturally than a molded plastic “log”, like a branch rushing with the flow and scaring away the cunning humpback whale with its clumsiness and strangeness.

Techniques for catching pike with vibrotails

As experience shows, the fanged predator shows active interest during slow retrieval. When carrying out a step-by-step game, it is recommended to connect uniform animation between the phases of lifting the silicone from the bottom surface and the phases of free fall. By incorporating uniform animation into the game, the ripper produces slow motion in the horizontal plane.

To achieve maximum naturalness, you should carefully select the size category of the silicone fish and the hook in the head area. These characteristics must match each other. In an effort to make the movements as slow and realistic as possible, you should select sinkers of small weight, otherwise the weight of the weight will make the bait difficult to walk along the bottom surface and is unlikely to arouse the interest of a predator.

The main part of pike bites usually occurs during the period of uniform play in a horizontal position; in the intervals when the bait falls to the surface of the bottom, the interest of the fanged one fades away.

Colors

Now let's talk about color. It is important when it comes to the time of year. But again... spinning! So here everything is quite clear. Summer, early autumn and late spring. Boat, shore - this is the way to use this trick. In this case, there is absolutely no need to purchase acid yellow, red or green blanks, unless you are going to get into muddy water, which our striped friend is not particularly fond of.

Perch loves clean water. But such water is ultimately cooler. It’s a paradox, because the humpback whale cannot stand the cold. And therefore, theoretically, it can swim and settle in creeks with muddy water. Moreover, many fishermen claim that countless numbers of them live there. So it makes sense to grab a couple of bright lures from the store - who knows, in the end!

It should also be noted that some craftsmen manage to use this gear during ice winter fishing. We will share this with you in this text below. There are some nuances in the selection of color schemes, but, however, the same rules apply as for any other time of the year.

Sheer trolling with vibrotails

When fishing from a boat, it is very convenient to use vertical lures. The vibrating tail is simply lowered to the desired horizon or to the bottom and begins to make jerks or knock on the bottom. Most often, pike perch respond to such a game. If you choose the right place with great depth and a hard bottom, you can catch a fair amount of this predator. Sometimes he takes on the falls, sometimes while lifting the bait from the bottom or on a certain horizon. This tactic often helps out when fishing for passive pike perch.

Shapes and sizes

As a rule, these products are made in the shape of small fish of various types of freshwater inhabitants. This is exactly what you should start from when choosing these toys. Many species have their own favorite delicacies.

But perch eats everything that is smaller in size. Therefore, the key factor here will of course be size. We sincerely hope that you are unlikely to be interested in individuals smaller than 15 centimeters, and therefore we recommend choosing anything larger than 3-4 centimeters in length.

In the rarest cases, perch reaches five kilograms with a total body length of 45-55 centimeters. But such giants are extremely rare. To say that there are practically none is to say nothing. The likelihood that an angler will run into just such a big guy is practically zero.

For all the time known to us, we can only count on one hand the successful cases of obtaining truly trophy, let’s not be afraid of this word, royal specimens.

In all other cases, you will be pretty lucky if you manage to pull out something larger than 2-3 kilograms. Fishermen often say that they caught 5 kilograms of perch. But they don’t clarify that all this needs to be counted in total, because we’re not talking about one individual at all.

So don’t be too upset and don’t get your hopes up with thoughts about the river striped and humpbacked colossus. Good luck would be to catch a one or two kilogram redfin hunter. These are the ones you should use for vibrating tails.

It doesn’t matter here what kind of fish the creators tried to parody, what is much more important is the size, as well as the material. It is preferable that the bait be made of silicone and have a movable tail with distinct notches, a large snout at the end and a notch in the middle.

Equipment and installation

Start mastering the equipment of vibrotails with the most traditional option: just put the bait on the jig head. As soon as wiring using this method becomes simple and easy for you, proceed to the movable connection of the vibrating tail with the ball load.

Examples of equipment for vibrating tails

Examples of equipment for vibrating tails

1. The classic option is to equip a vibrotail silicone bait with a spherical jig head. First, we select the length of the hook: its tip should come out from the back of the bait so that the distance from it to the head is greater than to the tail. This will help you “save” the tail of the bait from pike teeth. It is worth noting that the vibrating tail on the jig head should not bunch up or stretch excessively, it should not jump off it. The weight of the jig head depends on the depth of the reservoir. (see picture)
2. Another option to “secure” the back of the vibrotail from biting is to use a tee hook. In this version of equipment, the vibrotail is first placed on a jig head, then on a tee: it is tied to a tungsten leash, which is then passed through the entire body of the fish from the inside, from the anus to the head, and tied to the jig head. The tee is inserted into the belly of the bait. This option should be used if the length of the vibrotail is more than 10 cm. (Fig. 2)
3. A simplified version of the second equipment. The tee hooks to the main hook and is secured with one of its “stings” in the tail of the bait. The fastening mechanism does not limit the mobility of the bait, so this method is quite popular. The additional threesome also works on the twister. (Fig. 3)
4. If it is not possible to place a hook with a leash inside the bait, you can attach it from the outside. In this case, a tungsten leash is placed on the side of the vibrotail, and one of the hooks of the tee is inserted into the body of the bait. Often in this installation an additional tee with a leash is used, which is attached to the other side of the vibrating tail. The bait must be large, from 17 cm, and such equipment is designed for a large predator. (Fig. 4)
5. Another classic option: mounting a bait with a ball weight through a winding ring on an offset hook, which works well with bottom stepped wiring. First you need to insert the hook into the vibrating tail so that the sting comes out of the back. After this, you need to connect the hook ring sticking out of the vibrotail’s mouth with a ball weight using a winding ring. The design is flexible and quite effective. (Fig. 5)
6. Mounting the bait with a ball weight through a winding ring on a double hook. To do this, you need to make a small round hole in the body of the vibrotail, use this hole to pass the hook through the entire body so that its tip comes out of the mouth of the bait, and then remove the second sting of the hook from the other side. Thus, the stings will be located on the sides of the vibrotail. The rest of the design is identical to the previous one with an offset hook. (Fig. 6)

These are just a few options for equipping a vibrotail; in reality there are many more. Gradually mastering different methods, you will have equipment for any occasion, for any reservoir and any prey.

TOP 7 vibrotails

All kinds of tops and other things are very conventional. We decided to provide you with a list of the most optimal baits based on catching such a predator as perch.

So, we present to your attention a small author’s “topic” of the best of the best when it comes to catching minke whales.

1. Storm Wlpk05-Fpk is an inexpensive and high-quality product from the Finnish company Rapala Group. The bait fully deserves its place of honor and the title of one of the best vibrating tails that currently exist.

2. The Bass Assassin Sea Shad Limetreuse Glow is an entertaining little thing made in America.

3. Berkley Hollow Belly, PBHB6-GZS is another overseas guest who came to our wilderness straight from the United States of America. He sailed and immediately took an honorable place on our list.

4. Kosadaka Silverado 90 FTR - this thing will never let its happy owner down due to its reliable quality, which you can rely on in almost any situation, even the most difficult.

5. Rubicon Crazy Bait 8BLST-63-042 - for the little ones. The bait looks like a worm, which is why both large perches and those that are smaller, bolder and more numerous can bite on it. So be careful and careful when using this unit in your actions.

6. Fanatik Boxer 3.5 is a Ukrainian “mortar” capable of “delivering to the base” more than a dozen large kilogram specimens. You should not be skeptical about the seemingly post-Soviet quality, here it is at its best, rest assured.

7. Berkley PowerBait Drop Shot Minnow - looks most pleasing to the eye not only of the human viewer, but also of the underwater predator, which is the large humpback whale.

Uniform wiring of silicone bait

The simplest fishing tactic is uniform retrieval. The essence of such fishing with a vibrotail is as follows. The spinner makes a cast at a certain distance. It waits for the bait to reach a certain horizon and begins to rotate the reel handle at a certain speed. In this case, you need to constantly ensure that the fishing line is constantly taut.

You should also hold the rod correctly while retrieving. Usually it is held almost vertically with a permissible deviation of 5 degrees. When the bait is already approaching the shore, the Quitertip is gradually lowered towards the water. You should try not to jerk the rod, since such movements correct the movement of the bait, its movement turns out to be confusing. This is no longer a uniform wiring.

Usually, beginners learn uniform wiring most easily. If everything is in order with the gear, then already on the first fishing trip they get such wiring. Later they learn to change the speed of winding the cord. You can move the bait at different speeds during one retrieve. For example, we start driving at low speed, in the next segment we drive at medium speed and accelerate in the last phase. Thus, during one drive we drove the vibrating tail with three speeds.

It is very important during wiring to position yourself so that there is room for hooking. Vibrating tails themselves are soft baits, so they do not require a large amplitude when swinging. However, when fishing for pike perch, you still need to hook it sharply because of its hard mouth. It is very important that there is no tree, bush or grass nearby.

During uniform wiring, the vibrating tail may deviate slightly from the straight trajectory. The result will be a slightly zigzag movement. In general, silicones are very noticeable in the water column and even a well-fed predator often reacts to them.

Mounting bait and choosing gear

There are several ways to properly install this gear, but the most popular of them are the following:

• The hook is inserted into the upper part of the tail and the point comes out from the back side;
• The blade is threaded through the head;
• The body of the bait is pierced above the tail, but below the head;
• The bait is pushed along the entire hook, the point coming out through the body or head. At the same time, the tail should remain relatively free and not constrained, mobile, because this is the whole essence of this lotion.

As you can see, there is absolutely nothing complicated in installing a vibrating tail and even a complete beginner can carry out this procedure, having read the brief instructions given before, of course. Often the bait is combined with a spherical weight, which is placed next to the “mouth opening” of the blank.

It is clear that in this situation, when the entire body is strengthened with steel, with the exception of the tail, which is constantly in motion, there is a danger of the fish biting off this most important element of the entire structure. You can try to prevent this by equipping the hook with a special tee.

Options for vibrating tail gear, in addition to the jig head, do not exclude the use of double (offset) and even triple hooks, but installation of such a thing will be much more problematic. To do this, the blades must be carefully threaded one after the other to avoid damage to the bait.

The rod should be approximately 5 grams, from 1.8 to two meters long, the automatic reel is reinforced with multi-layer fishing line, in winter it should reasonably be replaced with a cast analogue, because multi-component threads do not withstand severe February frosts.

What is the difference between a vibrotail and a twister?

Today, fishermen have the opportunity to fish with twisters and vibrotails. What is the difference between these baits and which one should you prefer?

The main similarity between the two baits is the material used to make the products. The products are soft, plastic and have a peculiar tail. The twister resembles a caterpillar with a ring-shaped or ribbed body. During the movement, the tail of the device tries to straighten, which results in an interesting bending of the bait, as well as vibrations and oscillations. Thanks to such movements, it seems that a living organism is swimming, which undoubtedly attracts prey. The size of twisters is in the range of 3-20 cm. The largest products are used in the process of catching marine fish species. In stores you can buy products of various colors; the most popular are yellow, red, orange, white, silver and golden baits.

Read more

How to choose a lure for trout?

In the vibrotail, the motor element is the tail. As a result of the play of the product, vibrations are created, which are gradually transferred from the tail to the body. From the outside it seems that the bait moves naturally. The interesting color of the products adds even more naturalness. Even when fishing with vibrating tails in muddy water, an excellent effect is achieved.

This type of bait consists of a head, body, base of the tail and tail. A quality product should have a strong and dense head, an elastic and soft body, a movable base of the tail, and a flat tail. The most popular colors of the products are considered to be green, red, yellow and orange, but bluish-gray, white and transparent baits are also practiced.

The material that is used to make the goods is the main similarity between the two baits

How to fish correctly with a vibrating tail - wiring technique - catching game

Catching perch with a vibrotail differs depending on the type of reservoir and the preferences of the angler himself. Young spinning players use straight wiring. The bait behaves quite lively in the water and naturally imitates a fry fleeing from a predator. Sometimes this effect can be enhanced by minor jerks.

More experienced “players” often prefer stepwise wiring in summer, autumn and spring on the surface, and in the cold season - at depth. Otherwise, everything is quite simple here, because the vibrotail removes some of the responsibility from the fisherman himself and plays independently.

There are no special tricks here, but you can always come up with something special and experiment, including with a vibrating tail. The methods outlined above can provide you with a rich catch, the rest depends on the circumstances, type of terrain, etc.

What time and where is the best time to fish for vibrotail?

Quite often in practice he uses a vibrating tail for pike. Since the predator prefers large-sized baits, the best option would be a product 8-15 cm long. If fishing is carried out in small rivers and reservoirs, you should use smaller baits. The behavior of pike is not always stable, so sometimes the action of the bait must be smooth and accurate. Correct wiring and a high-quality product (with a movable tail) will ensure an excellent fishing outcome.

Slow movement of the bait can be achieved using small weights. Autumn is considered the most optimal time of year for fishing. This is due to the presence of zhor in the predator, which is stored for the winter. Therefore, the correct fishing technique will ensure trophy fishing. Fishing in winter with a vibrotail is also practiced as at any time of the year. You can find an effective way through trial and error. Having gained experience, the fisherman will learn to understand the behavior of the prey and adapt to its mood.

The best vibrotails

Despite the fact that the top best vibrotail baits have already been presented above, we need to provide a small set of recommendations regarding the use of baits at different times of the year, as we promised.

• Vibrotail in winter is optimal in a silicone body of a yellow or light brown shade. These colors are well suited for water slightly darkened by ice on the surface. Also in winter, you can treat the bait with special flavors in order to attract perch from the bottom of the reservoir.
• Vibrotail in summer can be of any shape, type and color. Naming the criteria for the unambiguously best representative of one’s family is like spitting in the sky and hitting the moon. At this time, as in March and early autumn, fish move in schools or hunt alone on the surface, so the use of odor enhancers is not a justified measure here.
• A vibrotail in the fall can bring you a considerable catch, because it is at this time that the striped beast begins to gain weight. She eats everything and there can be no exceptions. At this time, catching a perch with this lotion will not be the slightest difficulty even for a complete beginner.
• The vibrotail in the spring will be most effective in the second half, when the stripers begin to spawn. The main thing is not to lose a precious item that can get caught in tall coastal grass or snags.

It is impossible to definitively answer the question of which bait is the best. As you can see, everything depends on local criteria, which are sometimes not possible to foresee in advance.

Rules for installing a vibrating tail on a hook and jig head

50% of success depends on the correct placement of the bait. In order not to worry or be nervous at the fishing site, it is recommended to prepare everything in advance. There are two ways to attach a vibrotail to a hook: using a swivel joint or a jig head.

Half of fishing success depends on the correct placement of the bait.
Jig baits should be positioned with their backs to the surface of the water. For proper planting, you need to determine the place where the body begins to turn into the tail. The hook must be brought into the back of the bait exactly in the place where the narrowing begins. It is important to understand that the front part together with the hook must be motionless, only the tail plays.

Read more

How to paint a maggot red (or any other color) and give it a smell

Selection rules

To select the correct silicone head attachments, you should first of all pay attention to the hit parade of baits, compiled according to reviews from amateurs

TOP 10 best vibrating tails for pike

Based on popularity among fishermen, we can compile a list of leaders among vibrotails:

• The bait produced by domestic manufacturers specifically for Russian reservoirs, Crazy Fish Vibro Fat, perfectly catches pike in all weather conditions. Small cutouts in the body give the bait a special play when retrieved. Additionally, holes are made in the nozzle body into which individual parts are inserted to make the nozzle heavier.
• The pronounced abdominal part and elongated body make the behavior of the Relax Kopyto bait in water very attractive. An additional highlight, even with very slow retrieves, is provided by an additional fin in the tail.
• A large attachment that provides excellent catches with any type of fishing is the Vibro Worm 3.4. It begins to attract the predator immediately, when descending to depth. The plastic and very soft material allows you to display all the shades of the tail's play. The nozzles are treated with flavors of garlic and crustaceans. Contains amino acids and proteins.
• The realism of Fox Rage Fork Tails is ensured by the use of granular silicone in the production. The strong vibration of the tail, the plasticity of the material, the shape of the body of the bait - these qualities make even well-fed fish become active.
• The large fin in the tail of the Mann's Predator bait ensures active behavior of the vibrator in the water. The ease of hooking and high level of catchability allow it to be used on any body of water.
• Greedy edible silicone bait has a body shape slightly flattened in thickness. The large tail fin provides very attractive movements for pike. An incision is made in the body and an offset hook is inserted into it. It is especially good when fishing in snags and in places with thickets of grass.
• A significant range of movements when playing the Mann's Samba vibrator is ensured by small depressions in the fish's body and vibrations of the large tail.
• The “Spirit” attachment is made in the shape of a small fish with a wavy fin. The game of such bait is visible from a great distance. Universal, works great in currents and calm waters.
• A strong current is a place where the Rockvibe Shad bait will provide anglers with an active bite from pike and other predators. The shape of the body and tail ensures active play of the bait, even with a very slow and calm retrieve.
• The Kosadaka Vibra attachment has proven itself to be excellent when fishing in various regions and during year-round use.

Selection criteria and its differences from twister

Not a single fisherman can give a definite answer which is better - a twister or a vibrotail. Each of these silicone tips has its own original structure and different play.

Twisters are usually made in the shape of worms with a ribbed body and a wide spiral tail. When retrieving, the pike sees a vibration of the tail section and a change in the shape of the twister’s body.

The vibrating tail is made in the shape of a fish, and its game differs from the twister. This is due to the heel of the tail of the nozzle. When retrieving the bait, the predator sees a weakened small fish with a vibrating tail

Each type of pike bait has its own differences, the main thing when buying is to pay attention to some basic points

• Nozzle methods.
• Correct tail behavior.
• Shape and dimensions of the nozzle. One thing to remember: baits with narrow bodies and tails are good for casting over long distances, but their play is different from wide-bodied baits. A vibrotail with a wide body is more attractive to pike. It moves more actively during wiring. Size does not affect pike activity. She takes any bait. In spring or late autumn, during the feeding season, pike actively take any bait. But the most optimal length option is 70–120 mm.
• Coloring. This is one of the main points of choice. It depends on many factors, so bait should be prepared depending on the transparency of the water, the depth of the reservoir and the time of year. Spring and autumn are the times of active feeding for pike. She goes to smaller places and actively hunts. The best coloring during this period is natural, with a few highlights added. In summer, pike move to deeper places with cool water. At this time it is better to use bright shades. If you add a black or red back to the silver coloring of the tail, such bait can catch a predator when all other baits have failed.

Vibration tail tuning

Many fishermen, wanting to improve the catchability of a vibrotail, resort to tuning the bait. Refinement can be carried out in several directions.

1. Sometimes it is possible to increase the number of bites by painting. For this purpose, it is useful to carry waterproof markers with you. For example, if you make the back of the rubber black and draw a red dot on each side in the head area, then the predator will attack the bait more often.
2. There are several ways to improve tail play. The easiest way is to make longitudinal or transverse cuts at the tail constriction. A similar effect is achieved by drilling through holes in the narrowing. You can thin the narrow part of the tail by stretching it. It is enough to immerse the vibrating tail in boiling water for a couple of seconds to stretch the rubber. After this, you should immediately cool the silicone fish in cold water.
3. You can make a symbiosis of the moving body of a twister with the tail part and hoof of a vibrotail. Installation is easy with matches or instant glue.
4. Experienced fishermen have noticed that the predator responds better to vibrating tails that have positive or neutral buoyancy. This can be done by introducing polystyrene foam or construction foam into the body. In the case of foam plastic, the volume of the foreign body can be precisely selected. The body is cut, a foam plate is inserted into it, and then the damaged rubber is glued or soldered. Injecting polyurethane foam looks simpler. First, a hole is drilled in the body, and then the gun is inserted and the extruder is inserted at a minimum feed. After a couple of hours it will harden, the excess can be cut off with a knife and the vibrating tail can be tested. Ideally, it is desirable to ensure that the bait hangs in the water column.

Vibrotail is one of the simplest and most affordable artificial baits. If you choose the right tires for the conditions of the reservoir and perform the appropriate wiring, you will have a real chance of catching fish. And if the predator doesn’t like the bait in some way, then it can be modified right while fishing.

Sources:

https://rybalka.guru/nazhivka/lovlja-na-vibrohvost https://lakeking.ru/ryba/pike/vibroxvosty.html https://fishelovka.ru/lures-bait/sekrety-uspeshnoj-lovli-na- vibroxvost-dlya-nachinayushhix

Equipment for vibrating tails

Spinners who practice fishing with vibrotails use different methods of equipping these silicone baits.

Each method is good in its own way, and in different situations the same installation will be more or less preferable, which is due to the location of the hook relative to the vibrating tail.

There are the following options for vibrating tail equipment:

1. On a jig head
2. On offset hook via swivel joint
3. On a double hook
4. On the tee