To catch predatory fish, most fishing enthusiasts use various tricks and devices that they have made themselves. This is because many homemade baits turn out to be better than factory ones and attract predatory fish very well. Experts say that predatory fish from domestic lakes and rivers bite quite well on bait from the United States of America, which is called a spinnerbait.
This very unusual bait is quite easy to make with your own hands.
What is a spinnerbait?
The spinnerbait was invented in the United States of America, where it was used by spinners to catch large predators. The bait has a unique design and, even despite its bizarre shape, does not frighten aquatic inhabitants at all.
The spinnerbait consists of the following parts:
- a special, very rigid wire rocker;
- heavy sinker;
- one hook;
- silicone skirts;
- moving petals.
In cases where a fisherman is leading a spinnerbait, a sharp hook, which is enclosed in a silicone skirt, will move at a shallow depth, and the petals wrapping around their axis should move at the top. The most important advantage of this bait is that it almost does not cling to plants in the water and the remains of trees hidden from view. Thus, it is quite convenient to use in lakes with abundant vegetation.
We also recommend reading:
Budget spinning reels Riobi Exiya Model range of Salmo wobblers and the Salmo Hornet catalog Bait for crucian carp - do-it-yourself recipes for super bait Features of fishing with a retractable leash, selection of gear and installation
Spinnerbait device
The spinnerbait consists of the following main parts:
- wire rocker;
- weight-head;
- single hook;
- rotating petals (1, 2, or 3 pieces);
- silicone or rubber “skirt”, or silicone bait.
Although the general design of all spinnerbaits is the same, these lures differ from each other in the details. For example, the shape of the wire rocker may vary, the number, size and shape of metal petals, and the type of nozzle may differ.
The traditional “skirt” on the hook is often removed, and instead of it a silicone bait (worm, twister, vibrotail) is attached.
Practice shows that it is active fish who bite on spinnerbaits with two petals more often, while a sluggish, passive predator is better caught on baits with one single petal. For example, for catching active pike in shallow waters, spinnerbaits with a pair of silver petals and a light-colored “skirt” are good, and the back petal should be slightly larger than the front one.
Gallery: DIY spinnerbait (25 photos)
Description of the components of the spinnerbait
You can make a petal with your own hands from a sheet of metal. However, manufacturers offer, quite cheaply, a large number of types of petals of various shapes, so they can simply be purchased on the market. It is worth noting that making a petal with your own hands is a very complex process that requires a lot of experience and special tools.
You can make a wire frame with your own hands from absolutely any stainless steel wire. There is one point worth considering here. If the wire thickness is small, the vibration during movement will be of large amplitude. The main disadvantage of very thin wire is that it is quite poorly able to hold the required shape.
You can buy a weight with a built-in hook ready-made, or you can make it yourself. The entire manufacturing process is directly related to metal casting and takes a lot of time. special molds for casting on the market, but this should only be done when it is necessary to produce a large number of baits. Another method is to assemble special plaster molds for casting. One such mold can withstand approximately 15 castings.
Tips for making your own spinnerbait
When assembling bait for pike perch with your own hands, you should never save money on the swivel, because the number of fish caught is very dependent on the free movement of the blade. It is necessary for it to start moving at the slowest speed. The petal should also work in free fall, when the spinnerbait for pike perch is lowered into the water. In order to achieve such a movement, it is necessary to use a swivel on bearings .
The spinner has a wire base. There is a petal at one end, and a special head is securely attached to the second. The hook and weight are covered with a skirt, which, in addition to luring predators, serves to protect against various snags. Additionally, large pieces of silicone can give the spinner an uneven and unique movement that causes predatory fish to chase the bait. The first bite happens very quickly.
To make a spinner with your own hands, you can use the following materials:
- stainless steel wire;
- hooks with a rather long shank;
- lead sinker;
- stainless metal petals;
- various beads for baiting predatory fish;
- swivel and two winding rings;
- To assemble the skirt, you should use regular elastic bands.
To assemble the spinnerbait you will need the following tools:
- round nose pliers;
- pliers;
- special mold for casting cargo.
Spinnerbaits
Spinnerbaits are also rather complicated baits in appearance, but quite successful in operation. Their peculiarity is that they are a symbiosis of a rotating spoon and an “octopus” type bait, consisting of a fringe of rubber threads. This seemingly absurd design at first glance, completely unlike anything under water, for some reason arouses excitement in the pike and a desire to eat the fluttering, shiny and jangling-humming miracle of technology. However, the “octopus” can easily be replaced with any other silicone bait, including twisters and worms. Also, spinnerbaits are very good non-snaking baits, since they work in a vertical plane, easily passing grass thickets through its vertically growing stems and protecting the hook with a bow located in front.
Spinnerbaits work everywhere
Spinnerbaits cannot be called purely surface baits, since they work well both below the surface and in the water column, but with an accelerated retrieve speed they move easily on top. Here they are included in topwaters as a group of successful lures that can and should be taken with you when fishing with a spinning rod on top. And this is especially necessary because the trophy can be a large pike, which, as has already been said, for some reason loves this ridiculous-looking bait. Especially when there is not one, but two or even four petals on it, and an “octopus” made of rubber bands flutters below, like a Papuan skirt. This “skirt” is best used among thick grasses and snags. In open and clean places, sometimes other baits work better, for example, large vibrating tails. The use of several petals is more justified when fishing in shallow water, when the rotating petals create lifting force for the bait. In deeper places, it is enough to equip the spinnerbait with one blade. If you put delta analogues, which are more like propellers, on the bait instead of rotating petals, then it will already be a buzzbait, a bait that belongs to pure topwaters. However, spinnerbaits are more attractive to pike.
How to make a spinnerbait with your own hands
Many fishermen are wondering how to make a spinner with their own hands? From the very beginning, you need to decide on the dimensions of the future product. Quite often, a spinner for pike perch is made 3 centimeters long and with a total weight of about 5 grams.
First of all, you need to attach a thin wire to the hook. It is carefully threaded through the eye of the hook and wrapped a couple of times for greater strength. Unnecessary wire is cut off using wire cutters. The remaining part is placed in the form of the connection point and filled with molten lead. Then you need to wait a little time until the hot metal hardens.
Next, you need to retreat a small distance from the load to the place where the wire will subsequently be bent to give the required shape. After this, the wire is bent into a small loop in the shape of a ring. Now it’s time to work on the petal. The best option is considered to be that its thickness does not exceed 0.4 millimeters. The stainless steel wire is carefully bent into a loop. The colorful beads should be placed between the two loops. Additionally, it is better to secure them through a small ring, which is made of wire of a similar diameter. The other petal is secured with a swivel and another winding ring.
How to improve your spinnerbait
Much attention must be paid to the shine of the material from which the petal is made. It is best to cover it with a layer of varnish. This will be very useful when fishing in opaque water. An alternative to a silicone skirt can be a simple vibrating tail . Attaching the vibrotail to the hook is done in the same way as putting on a simple fishing head. You can replace the vibrating tail with a piece of edible rubber.
When fishing with a spinnerbait, the shape of the rotating blade plays an important role. It usually has the shape of a circle. Such a petal will be able to raise the spinner in the water and make it more effective at shallow depths. The petal, shaped like a willow leaf, turns out to be quite narrow. This bait moves well in the water. It must be used when fishing at great depths.
The spinnerbait performed well when catching zander, perch and pike. The bait helps to lure predatory fish out of flooded trees and underwater plants. To make a spinner you do not need to use very many materials and tools. A spinner is a fairly catchy bait, so such a homemade device will help any fishing enthusiast provoke a predatory fish to attack, and will always allow him to return with a big catch.
Posting a spinnerbait
An even retrieve is the main method with spinnerbaits, especially when fishing in shallow areas.
Pike are more likely to attack slow-moving bait, so the pace must be appropriate.
To avoid problems with the spinnerbait quickly sinking to the bottom, choose lighter lures with wide blades. If you plan to fish at depth, using a longer cast, you will need a spinnerbait of greater weight.
In places where the depth exceeds 1.5-2 m, try stepped wiring, to which both pike and perch can react. The use of the “step” is relevant throughout the warm season, but it brings the best results in May and September-October.
To catch active pike in the summer, they turn to surface fishing, the essence of which is the rapid movement of the bait near the surface. With such a fast retrieve, the blade of the spinnerbait leaves marks on the surface of the water that are clearly visible to the fish. Naturally, a passive predator is unlikely to chase a fast bait, but a hungry pike hunting in the upper horizon may well be interested in such a fast bait.
Also, if traditional uniform wiring is unsuccessful, you can diversify it a little with small tricks.
For example, this could be a sharp stop for literally one second, that is, after casting, you lead the bait 5-6 m, then stop abruptly and immediately continue evenly moving.
Sometimes it is precisely such a stop that provokes an attack from a predator following the spinnerbait. You can proceed according to a similar scheme, replacing sharp stops with the same sharp jerks along the course of a slow, uniform drive. In general, you need to experiment, starting from the uniform wiring of the spinnerbait.
