Do-it-yourself spinners: with the experts we make the best homemade spinners for pike and perch (110 photos + video lesson)

Making spinners with your own hands is not only an opportunity to save money on your favorite hobby, but also an opportunity to get a perfectly adapted bait for a specific body of water and your own fishing style.

To make a spinner, you can use available materials.

Advantages of homemade spinners

A do-it-yourself spinner for perch or other fish has many advantages:

ease of manufacture;
affordable price;
you can use improvised materials;
the ability to experiment with different sizes and shapes;
manufacturing your own unique catch model;
Possibility of producing a large number of baits.

A well-made spoon will not be inferior to a factory one in terms of catchability.

You need to start with universal models, and then try to experiment with different parameters.

Techniques and tactics of catching perch with a spoon

The main thing on a pond is to designate all the fishing points, make a plan and then make the first cast of the bait. At the same time, you should not sit in one place for a long time if there is no bite. The perch is quite active and quickly detects the bait. If the bites stop, then there is simply no perch in this place, and he left it a long time ago.

When fishing for perch, it is important to pay attention to fishing technique and tactics. You must first test the lure on the ground. Start it so that it taps freely on the ground, then:

raise the bait to a height of up to 2 m;
lower slowly;
count to 5 seconds;
after the bait reaches the bottom, immediately raise and lower the spoon again;
play with the bait, pausing for up to 5 seconds;
after which you can begin the raid and cross the middle layers of water.

Perch is caught well with live bait, so it is necessary to put such bait on the hook so that the predator quickly pecks at it. When the fish is starving, the color of the spoon does not play a significant role. If the water is cloudy, then the color and size are still worth taking into account.

When playing with a lure, it is advisable to bring the perch to the surface for fishing. Fishing is successful if there is a small cut or protrusion on the surface of the water, since lowering the bait in a vertical position will only significantly increase the frequency and degree of bites.

Materials

To make catchy spoons with your own hands you need the following basic materials:

thin sheet of metal (ideally stainless steel). You can take an aluminum container, which you cut into flat pieces;
thin wire or string from a guitar. Do not use wire that is susceptible to corrosion;
2 swivels;
paste GOI;
winding rings.

Manufacturing technology

First you need to make drawings for making the spinner yourself. Beginners should download ready-made drawings; in the future, based on them, they can make their own.
Transfer the drawing onto thick paper (ideally cardboard), and then onto a metal blank. If there is no drawing, you can transfer the shape of a tablespoon to the workpiece.
Fold the workpiece in half to obtain 2 symmetrical parts.
Sand the surfaces until they are smooth.
Solder a fastening assembly consisting of 2 swivels connected by thin wire.
To give the product a shine, polish it with GOI paste.
Additionally, mount the winding rings. This will prevent the line from breaking.

In the photo of a do-it-yourself spinner, you can clearly see the various options for homemade baits and the stages of their production.

Alternative materials can also be used. For example, a good spoon can be made from an old spoon.

Homemade winter perch spoons. How to make it yourself

A homemade catchable spoon called “Boat” is indeed similar in its shape to such a watercraft. But she is destined to swim underwater, or rather under ice, for the purpose of ice fishing for perch during winter sheer trolling.

How to make such a “working” bait for winter perch - read and watch in the master class with detailed photos in this article below. . .

How to make a catchy winter lure for catching perch called “Leaf”? How to choose the right material, size, shape and curves? How to make a homemade spinner neat, beautiful and effective for winter fishing?

Our regular author, Taran Sergey Nikolaevich, shares all this, as well as recommendations for playing with bait, with us in the next fishing master class with a large number of detailed photos.

Another author's master class on making catchy perch spoons. Now the author of the article about the “Maropedka” spinner (Taran Sergey Nikolaevich from Novokuznetsk) is making a bait for winter, ice fishing for perch called “Rombik”.

As always, in addition to high-quality photos of the sequence of making the bait with your own hands, the author provided a drawing of a catchable spoon with the necessary dimensions for making it yourself.

Author's master class on making a catchy perch spoon “Maropedka”. In addition to high-quality photos of the sequence of making the bait with your own hands, the author provided a drawing of a spinner with the necessary dimensions for making it at home.

Two files of ready-made templates (two sizes - 35 and 40 mm) are available for those who like to make homemade winter lures.

Another article by our regular author Alexey Babushkin about homemade winter lures made based on sports ones. As always, the author explains in detail the intricacies of making and winter fishing with these types of spinners.

Why the game is important, and not the shape of the bait, how to see the return of the spinner by the nod and the fishing rod and at the same time understand how it plays under water, read in this author’s material below. . .

A technology for fairly quickly manufacturing a spinner from two different metals (bimetallic) is presented.

The shape of the spinner is very simple, but as always the author has a secret, namely the wide and thin tail of the spinner, the bend of which can control the play of this homemade bait for winter spinning.

The dimensions, schematic drawing and weight of the spinner obtained as a result of fishing creativity are given. Descriptions are given of setting up and playing the bait.

In this article, the author shares his experience in making homemade spinners for catching rotan.

In addition to the manufacturing process itself, he explains in detail the difference between a rotan spoon and bait for catching other fish, and why it is difficult to find a spoon for catching this particular predator in the store. In addition, the article describes how and what is best to use for hooking for winter fishing for large rotan “beast”.

Spinner for pike perch

To catch pike perch, they use special spoons, which you can also make yourself. For this you need:

paperclip or thin wire;
metal plate;
treble hook;
beads;
soldering iron

Making a lure for pike perch yourself:

Apply the drawing to the sheet material. Even tin from a tin can will do.
Cut out the product and sand it thoroughly.
Drill 2 holes at opposite ends of the product.
Thread the wire through these holes and secure the hook so that it hangs freely.
Attach a small bead to the axle.
Cover the product with shiny paint. The vessel prefers bright, eye-catching baits.

Spinner

M. Schwartz proposed the following design of a rotating spoon.

The spoon is made of metal. The workpiece has the form of an ellipse-shaped plate (Fig. 1).

The plate is bent in the longitudinal direction along a helical line (Fig. 2). The edges of the plate have two sections: 1, 2 and 3, 4, which are bent in pairs in opposite directions. So, section 1 is bent in one direction, section 2 in the opposite direction. Sections 3 and 4 are also bent. In relation to the transverse axis of the spinner, the bent sections of the edges are asymmetrical. For example, sections 1 and 3 are longer than sections 2 and 4. The amount of edge bending may vary. There is a hole at both ends of the spoon, into each of which a winding ring is placed. When the spoon is immersed in water and while being retrieved, it rotates and this attracts predatory fish. The more elongated the ellipse, the less rotation it has and vice versa.

Winter lure for perch

In winter you can also fish with a spoon, and a homemade one at that. So, we make winter spinners with our own hands:

Cut a stainless, brass or copper blank up to 0.3 m thick.
Approximate dimensions: height – 35 mm, top width – 30 mm, base width – 7 mm. To prepare, use special metal scissors. After preparation, sand the edges of the product.
Give the workpiece a boat shape. This can be done on a special form, bending the workpiece with hammer blows. The bottom of the recess must strictly coincide with the axis, which will subsequently pass here.
Fill the resulting depressions with solder using a soldering iron. You can immediately solder miniature hook and line loops.
Mount a winding ring on the spoon, through which attach a size 16 treble hook. To decorate the tee, it is advisable to use a rubber cambric.

Classification of baits

Very rarely, there are beginners in fishing who cannot distinguish a spoon from a wobbler. The main difference between spinners and their craft relatives is the material from which they are made, as well as the shine - from which the name of the former comes.

[THERE IS AN ANSWER] How to fish with a spoon from the shore

Shiny lures themselves fall into three main categories:

Making spinners for pike and perch with your own hands requires the novice master to have a good understanding of the differences between types of spinners. Only after deciding on the main task and the goal that he seeks to achieve, an experienced craftsman begins the manufacturing process.

We thread a bead, a petal and a bead again onto the wire above the core.

Making a spinner bait for medium-sized predatory fish is within the capabilities of any handy angler. It is not only unique and convenient, but can also be a source of pride, because all this beauty was made by your own hands. Let's hope that the fish will like these efforts too!

First, let's make the core. We connect the axle (we use a drill) and the wire together and clamp it in a vice. We wind the wire around the drill to the desired size of the workpiece, the turns tightly to each other.

The result is a spiral. We cut off the excess wire, clamp it in a vice and compact the turns.

We remove the workpiece from the axle and grind the ends with an engraver or file. Then we clamp the future core in the chuck of a drill or screwdriver and grind the rotating workpiece.

Initial processing is complete. Now the workpiece needs to be weighted. We put it on the axle again.

We treat the workpiece with soldering acid.

Spoon spoon

One of the easiest ways to make a spoon with your own hands is to make it from an aluminum spoon. You can also use stainless steel spoons, but aluminum is much easier to process.

For production you will need:

any tablespoon;
needle file;
hook;
winding rings.

Manufacturing procedure:

Cut the handle off the spoon. Carefully polish the cut area with sandpaper or a file.
Make 2 holes at two opposite edges along the long axis.
Install the winding rings into both holes.
Attach a hook to one hole, and a fishing line through a swivel to the other.

According to experienced fishermen, this bait is perfect for catching pike. Moreover, many manage to catch even trophy specimens with a homemade spoon.

Homemade spoons for pike fishing

As mentioned above, many fishermen rarely buy spoons for fishing; they usually take them in order to study the structure, and make their own at home in their likeness. Fishermen make high-quality and catchable lures on their own with the help of many years of fishing experience.

There are many types of baits that you can make yourself. A good lure should shine, have enough weight to provide a more interesting movement, and it should also be very similar to a real fish.

The best materials are:

Lead
Copper
Brass
Tin
Stainless steel

Types of spinners

There are three main types of spinners:

Turntables
Balancers
Oscillators (oscillating)

Hesitating

This species is especially good for pike fishing. They are made from metal plates that are either painted or a shiny material is chosen. A hook is attached to them.

There are several fairly simple ways to make such oscillations:

The most popular way of making it is from the handle of an ordinary spoon. To increase catchability, you need to slightly bend the stem at the ends. Using a drill, holes are made for attaching the spinner itself and the hook. If you cut a few centimeters of metal from the handle of a spoon, it becomes very similar to pike’s favorite food - bleak.

The blade of a spoon can also be used to make bait. It is sanded with a file at the cut site, and several holes are made for fastening. And that’s it, the beautiful spoon for pike is ready.
From the handle of an ordinary teaspoon you can make an almost exact copy of a Devon spoon. The manufacturing principle is the same, only the tee needs to be attached to the narrow part of the spoon. This can keep the bait in the water while hunting. To make the vibrator play more beautiful, its ends can be slightly bent.
A bimetallic spoon can be made from two types of metal. Alternatively, take copper and aluminum. To work, you need to take two identical pieces of metal, with holes already drilled for ruts and rivets. Metal parts must be riveted and sanded. Using stamping, the future lure is given the desired shape and geometry. For a better effect, you can polish the surface to a shine.
You can also make an oscillator from an ordinary small metal tube. It is cut from both ends at different angles, leaving about 5 cm. A hook is attached to the sharper edge to more realistically imitate a fish.

[ HAS AN ANSWER ] DIY winter bait for bream for ice fishing?

Rotating

This type is made from several elements - a petal and a base. They should have different shapes and sizes. When the fisherman plays the game, the petal spins around the base, attracting predators.

Spinner-balancer

This type of bait is very similar to real fish. The balancer is the only type of vertical spinner. It is made from a 4-5 cm tube, to the ends of which hooks are attached. The balancer is tied in the middle.

First, you need to cast a casting mold from plaster, then attach hooks to it, and pour hot metal. After everything has cooled and stuck together, you need to clean out all the irregularities and paint the future bait in a bright color.

Shapes of homemade lures for pike

Before making a blank, you need to decide on the shape. The type of petals can be different: round, rounded, elongated towards the ends, pointed. The most popular one is elongated and slightly pointed at the edges. It will be universal and suitable not only for catching pike, but also for asp and chub. The wide and oval shape of the petals also attracts predators well.

If you make a bait with a narrowed petal, the game will be faster and more active, but with a round one, the retrieve will be slow.

Color of homemade spinners for pike fishing

The most optimal coloring option for the pinwheel is silver or gold, because it most closely resembles the color of the fry. In general, you need to choose a color depending on the time of fishing, the type and color of the water in the reservoir. If the water is clean and light, there are a lot of small fish in it, then it is worth painting it silver.

Decoration of spinners

You can decorate in several ways:

Attach plumage made from tinsel, silicone, and brightly colored threads.
Additional coloring. You can completely draw the fish with eyes, fins and tail.

Making a spinner yourself is not as difficult as it might seem. To do this, you only need a small set of plumbing tools, suitable material and a little effort. The material can be stainless steel, copper, brass, aluminum or bronze, but, unfortunately, in our capitalist times this is no longer lying around, so there is nothing left but to use some simple objects familiar to everyone. Which ones exactly? Now let's find out:

Homemade vibrator

Oscillating spoons are considered very effective. This bait can be made in the following way:

Mark the material according to the sketch. You need to get a diamond-shaped blank.
Cut out the workpiece.
Determine the minor axis and bend the part along this line.
Solder a triangular metal plate to the part. The smaller it is, the better.
Attach the hook to the plate, also by soldering.
A ring will be fixed at the top to which the fishing line will be attached. First you need to make a hole for the ring.
Sand and polish the bait to give it an attractive shine.

Non-snagging lure

For fishing in reservoirs with a large number of snags and grass, you need to use non-snag hooks. They usually do not cling to obstacles, so they do not break off.

How to make antiseptic with your own hands: the best instructions for making antiseptic at home + photo reviews
DIY medical mask - TOP 100 photos and step-by-step instructions with diagrams of the best ways to create
What are paintings by numbers?

Made this way:

Solder the hook to the lure. Use any suitable hook to suit your needs.
Attach the antennae inside the spoon so that they cover the sharp parts of the hook.
Solder the workpiece to the wire.

You can make your own antennae from springy wire or purchase ready-made ones. They will protect the tip of the hook, preventing snagging.