Fishing rod for a reelless fishing rod: without a nod of wiring, how to make a fishing rod with your own hands, nodless fishing rods, principle of operation

Kickless fishing rod for reelless fish - fishing, equipment and technique

Catching fish with a nodless fishing rod for a reelless rod is the pinnacle of baitless fishing efficiency. Thanks to the direct contact between the angler's hand and the jig, even the most careful bites do not go unpunished for the fish. The hookless reel is easy to learn - the main thing is not to make strategic mistakes at the beginning and rely on the general principles of baitless fishing. Fishing with a reelless bait without a nod has its own specific characteristics. In this article we will look at the nuances, designs of fishing rods and equipment for hookless reelless fishing rods.

Pros and cons of a hookless fishing rod when fishing with a reelless rod

Points in favor of using a fishing rod without a nod when fishing with a reel:

With this equipment there is a direct connection between the hand and the fishing line . Thanks to this factor, there are additional opportunities for playing with bait. Good contact allows you to immediately signal a bite, without giving the fish the opportunity to escape with impunity.
There is room for more aggressive animation techniques .
There is no need to continuously monitor the nod of the fishing rod for a long time. This can sometimes be tiring and lead to lack of concentration.
Better suited for use when fishing in wind and frost . There is no negative impact on the nod.
Making your own no-kick fishing rod is quite simple . In some cases, such gear, with the proper dexterity and skills, can be better than purchased ones.

However, this method of fishing has an important drawback. The selection of tackle and the choice of method of play must exactly correspond to a certain type of fish. It is not possible to make a universal tackle that is suitable for all possible cases.

Fishing rod without nod

Fishing with a nodless reel

The tactics of winter fishing for a reelless bait without a nod are no different from standard baitless fishing. The basic principles of a rewinderless rig apply equally to a nozzleless rig. Read more in the article about baitless fishing. One of the basic “whales” of such fishing is the balance of the equipment, the correspondence of the weight of the jig to the diameter of the fishing line and the elasticity of the nod. The nod itself (six in the nodless version) is selected depending on the required game - low-frequency for bream or high-frequency for perch. Balanced equipment is the basis for the second “whale” of the reelless, monotonous game without failures. The nodless reel allows you to create even more sensitive tackle, only the first place in the equipment is no longer the adjustment of the nod, but the selection of the whip.

Features of nodule fishing rods:

Reducing the angler's response time to a bite due to low weight and a rigid elastic whip. Even the most sensitive bites do not give the fish a chance to go unnoticed - any touch on the equipment will result in an instant hook (provided the equipment is correctly balanced).
Relative stiffness of the whip (carbon is used - the tip of a summer fishing rod or a feeder quiver tip). The result is a fast action in miniature - when playing, only the upper third (quarter) of the fishing rod vibrates. The action of the jig, the bite – everything is transferred directly into the fisherman’s hand.
Insensitivity to the wind - there is simply no soft nod.
Relative fragility. Kickless fishing rods are small, made of carbon with foam reels. Require careful handling during transportation and use. Both carbon and foam are fragile.
The length of some hookless fishing rods is up to half a meter. Each angler empirically determines the length of the whip he needs for a comfortable game (more on this later).
Tactile contact with tackle. When fishing, you can look away to the side - the game and bite are controlled not by the eyes, but by the tactile receptors of the hand.

Reelless fishing technique

The technique of fishing with a reelless reel in winter is chosen depending on the environmental conditions. There are several ways to serve mothless. Each of them can become effective and produce a lot of bites. Postings when fishing:

Winter fishing with a reelless bait looks like this: drill a hole in the ice cover and make 2 lifts of the jig. The ascents must be fast. After the second rise at the top point, you need to take a short break. These postings are repeated several times if the bite does not appear. If it is completely absent, it is necessary to make another hole.

Tips for fisherman: How to make a diverting leash on a winter fishing rod - How to best use

Each angler who is interested in reeling over time develops his own fishing technique, a special grip of the fishing rod, fishing style, the ability to set and maintain a certain rhythm of the game, as well as hooking. Naturally, the fisherman begins to understand and imagine which fishing rod he is most comfortable fishing with.

Features of the technology

The technique of fishing in winter without a nod is not fundamentally different from the standard reelless one. The basic wiring options are the same. Each angler independently builds his own specific game based on basic options. There is only one rule - do not allow failures. If you cannot achieve a high frequency without failures, it is better to do it more slowly, but rhythmically and without parasitic movements. Each type of fish prefers a certain game. Bream – smooth, perch – fast, roach – medium. Basic combinations of fishing techniques with a nodless fishing rod in winter are discussed in the same article, at the link above. If a combination does not bring a bite within several cycles, you should include provoking moments, pauses, changes in speed or amplitude in the game.

Noduleless fishing rods

The correct hookless tackle cannot be found in the store (with rare exceptions). Fishermen make such fishing rods themselves. There is nothing complicated about this - the main thing is to choose the right whip. Roughly speaking, the whip itself is the basis. It’s just that it’s also equipped with reels for storing fishing line. The correct grip is a pencil grip. The stick is clamped with fingers (two, three), and the game is played with the hand, not the forearm. To make a nockless fishing rod with your own hands, you do not need to have the skills of a mechanic. Materials, file, sandpaper, drill - everything is assembled literally on your knees. To begin with, you can try fishing with sports balalaikas or the lightest store-bought fishing rods, replacing the soft whip with a carbon one. However, over time it will become clear that it is better to lighten the fishing rod even more and switch to washers (fungi, buttons) or mini reels.

Constructions

Axleless rewinder without nod.
Sports balalaika.
An ultra-light, no-kick, rewinder based on the Shcherbakov washer principle.
Ultralight fishing rod with longitudinal reels.

The first two options are simple - instead of the factory one, a carbon whip is glued in, and the fishing line is clamped at the end with a cambric. However, such structures are still heavy. And if an angler is serious about fishing with a fishing rod without a nod for winter fishing, it is better to spend time and build ultra-light tackle. Let's look at how to make a nodless winter fishing rod for a reelless fish.

Whip

The nodless rewinder is, first and foremost, a whip. The whip is selected according to the weight of the jig, depending on the desired game. The best solution is a carbon tip from a summer fishing rod. The thickness (power) of the whip is selected experimentally. There are a lot of options in stores; brute force and logic will help. For high-frequency play, you need a shorter whip - with a long six, such vibrations cannot be achieved. For active perch, a short whip is what you need. In the dead of winter, and especially for bream, it is better to make a long whip, 30-50 cm. With such a lever, even the slightest attempt of the fish to take the jig will be felt in the hand. The game for bream is slower than the reelless game for perch. With a long six it is easier to make the desired soft vibrations. The length of the whipless whip is also selected individually based on the angler’s habits.

Reel

For fishing at great depths, it is more convenient to use a reel, however, this will make the no-kick tackle heavier. Any design of minimalist sports balalaikas or specialized balalaikas will do. For fishing at shallow depths, round reels are used based on the Shcherbakov washer principle. The workpiece is cut from solid foam or foamed PVC sheet. Then, using a file and a sharp knife, a groove is carefully removed along the radius, into which, in fact, the fishing line will be wound. This can also be done using a wine or champagne cork. At the end, the workpiece can be treated with varnish that does not corrode the material. To make it even easier, the middle is also removed, but this greatly increases the fragility of the washer (button, fungus).

In addition to the radial version of non-kick washers, reels can also be cut horizontal, monolithic or composite. The blanks are cut from the same materials as the washers. The simplest life hack is the cut off part of a yogurt bottle (near the neck). Burrs are processed with a needle file. Holes of the required diameter are drilled with a drill, and a six is attached to them with superglue. It is better to glue the pole at an angle slightly downward - this will make it easier to lower the line from the reel when fishing for large fish. The winter fishing rod without a nod is ready.

Making a nodless reel for winter fishing yourself

The entire process of making your own hookless reel for winter fishing is quite simple and does not require any special knowledge. You should take a carbon tip prepared in advance from a fly rod or feeder rod and cut it into two or three parts, approximately thirty to thirty-five centimeters each. The edges should be treated with a needle file or file so as not to damage the fishing line. You should also remove the ear at the tip.

We take a piece of foamed PVC sheet, which is approximately twenty centimeters in thickness, from this piece handles and reels should be machined to a length of about 50-70 centimeters. A through hole should be made in the handle along the entire body, which fits the diameter of the whip. It is necessary so that the line can be passed through further. All excess PVC should be removed in order to make the tackle as light as possible.

Next, you should coat the entire lower edge of the whip with superglue and then connect it to the handle. A cambric or tube is put on the tip of our rod, but in such a way that the cambric or tube protrudes slightly beyond the whip itself, which will avoid damage to the fishing line. So that the line can be passed through more easily, first take a thicker line, attach the main line to it and let the initially thick line through. When winding the fishing line on the reel, it is better to remember the winding order in order to facilitate the process of unwinding the tackle during fishing. The reelless jig, necessary for fishing and suitable for the fishing rod, is attached to the fishing line using a “Palomar” or “Clinch” knot.

Types of fishing rods for reelless jigs

First of all, decide on the type of gear:

1. A fishing rod with a handle will be the best choice for beginners. It fits comfortably in the hand and is easy to position the bait correctly. The disadvantages include the weight - it is a little more than other types of fishing rods.

2. A balalaika fishing rod is perhaps the most popular equipment for winter fishing. The coil is inside the handle. These fishing rods are compact. The disadvantage is that they are inconvenient for high rises of the bait, over half a meter. In addition, hooking with them is more difficult than with fishing rods with a handle.

3. Fishing rod-filly – has a voluminous handle, which is used as a reel. It is convenient to place such a fishing rod on ice, this is a big plus in float fishing. For fishing with no bait, such a fishing rod would not be the best choice.

Features of reelless gear

So, the reelless tackle is quite simple and does not consist of any special elements. The main role in it is played by the fishing rod, which affects:

— the quality of the jig’s wiring, the ability to maintain one game of the bait for a long time; — variability of wiring, changes in frequency and amplitude; — ease of registration and hooking.

Each angler who is interested in reeling over time develops his own fishing technique, a special grip of the fishing rod, fishing style, the ability to set and maintain a certain rhythm of the game, as well as hooking. Naturally, the fisherman begins to understand and imagine which fishing rod he is most comfortable fishing with.

In the process of mastering reelless fishing, through trial and error, the design of the fishing rod, the length of the whip, the size and weight of the reel, and other little things are selected. As a result, there are a lot of options for fishing rods for baitless jigs and all are quite suitable for comfortable fishing in this way.

Which fishing rod to choose for reelless fishing

There is no special and only correct fishing rod for reelless fishing. Each angler is individual and the ideal fishing rod will be different for each, but certain general recommendations still need to be given.

A fishing rod for reelless fishing can be divided into three parts:

– whip; - pen; – coil.

In general, the lighter each of its elements is, the better. But let’s not forget about the individual characteristics of each fisherman.

Whip

Perhaps the most important element of a reelless fishing rod. It is he who determines the quality of the retrieve and the angler’s ability to change the options for playing the jig. The whip should ideally allow any bait retrieve, from the smoothest with pauses to high-frequency continuous.

Today, fishermen are roughly divided into two camps. Some prefer a short whip, others prefer a long one. A short one allows you to give the jig the most stable vibrations. It is accepted that the optimal length of the whip should be around 20 cm.

Short whip 20.5 cm

Some reelers do not agree with this and prefer fishing rods with a whip of 50–60 cm, or even more. This solution gives the wiring its own peculiarity in the form of periodic failures in the action of the jig, which attracts the attention of the fish.

Tips for a fisherman: How to make a side fishing rod for bream - All the nuances

Objectively speaking, both options are correct, and experienced lovers of fishing with baitless jigs have fishing rods with both a short whip and a long one. It is more advisable to use short fishing rods in shallow water when using miniature jigs, and long ones - at depths with heavy baits.

Winter fishing rod handle

Most often, fishermen have rods called “balalaika”. These are very compact fishing rods that fit comfortably in the palm of your hand. They are light and reliable.

However, this type of handle is not very convenient for high lifts of the bait (up to a meter), and not everyone can perform a high-quality hook with it.

On the contrary, fishing rods with a handle are easier to master. They can be positioned differently in the palm, changing the angle and grip. It is easier to hook with such rods. Their only drawback is that they weigh more than the Balalaika. In general, you need to try both types of handles in order to decide which is more convenient to catch and how to move the jig efficiently.

Winter fishing reel

With this element everything is more or less clear. Its task is to store the fishing line, reel it in and reel it in during the fishing process. The coil must meet the following requirements:

– compactness; – minimum weight; - easy move.

Since the reel does not take part in the process of landing fish, there are no great demands placed on it. Of course, it should not have metal parts that could freeze in the cold.

The topic of nodule-less “mothless” also did not pass by. The founders of this branch of “reelless fishing” in their films (I recommend finding them on YouTube), demonstrating the principles of such fishing, made me doubt the reality of this activity. And then, when I had already made several fishing rods myself and tried to fish with them, then, to be honest, it turned out that everything worked. And now I have to say a big fishing thank you to them - for the idea.

The topic of nodule-less “mothless” also did not pass by. The founders of this branch of “reelless fishing” in their films (I recommend finding them on YouTube), demonstrating the principles of such fishing, made me doubt the reality of this activity. And then, when I had already made several fishing rods myself and tried to fish with them, then, to be honest, it turned out that everything worked. And now I have to say a big fishing thank you to them - for the idea.

After experimenting with no-kick for a while, I ended up putting it off until a more appropriate time. And it was possible to realize a game that was attractive to perch only when I switched to nodding gear with baits that were noticeably smaller in weight and size, which were imparted with smoother movements using the nod. But, nevertheless, I have not yet removed the nodular gear from the arsenal. On other fishing trips, when it was possible to find a more vigorous perch, they perfectly fulfilled their mission.

I can say that on recent fishing trips I pick up the two types of fishing rods described above in my hands much more often than all the others that have nods installed. For me, feeling a blow to the hand is still more pleasant than being hypnotized by a bright nod for a long time.

The equipment of the fishing rod determines how successful the catch will be during winter fishing. Also, the angler must have good skill in using it, because there is no bait to attract fish on the hook, and the jig must be in constant motion. Not only the correct movements of the fisherman’s hands, but also fine-tuning the nod guarantees a successful catch:

Requirements for fishing rods

The main criteria that the right fishing rod for reelless fishing must meet:

minimum weight;
strength and reliability;
ease of use.

It’s good if the whip of such gear is light and flexible. Then it will compensate for the jerking of the fish when hooking. The pole of a commercial fishing rod that is too hard can be sanded to make it softer.

It is preferable to choose a fishing rod whose handle is made of a “warm” material that does not cool your hand - cork or foam. Plastic handles are not so comfortable in the cold; fishing with them is less comfortable.

Coil

Before buying a fishing rod, check how smoothly and easily the reel rotates and whether the stopper works well. This element of the tackle does not take part in fishing, so there is no need to make serious demands on it. For reelless fishing, reels made entirely of plastic and without metal parts that freeze in the cold are suitable.

The spool axis can be lubricated with lard to make it rotate more easily. This unique lubricant does not freeze in the cold and ensures reliable, uninterrupted operation.

Nod

This element can be called the most important part of a reelless fishing rod. It primarily determines how correct the bait will work and how attractive it is to the fish. Nods for fishing with reelless bait are sold in fishing stores, but almost all enthusiastic fans of this kind of fishing prefer to make them themselves.

Almost every experienced bleeder has his own technology for making nods that perfectly suit his requirements.

Mylar nod

Lavsan nods for reelless fishing are the best choice for baitless fishing. They work well at retrieving bait, and also show good bites. The best option is a narrow nod made of thick, 0.4-0.5 mm, lavsan. It is rigid and therefore works optimally.

Plastic nods

They are made from plastic bottles or cups. It is enough to cut a strip, and then, if desired, grind it onto a cone. The materials of different bottles and cups can vary greatly, so choose them carefully.

X-ray film nods

X-ray film is another material that can replace lavsan. The technology for making the gatehouse is the same.

Metal nods

They are made from clock springs or old tape measures. The advantages of such a gatehouse are durability and indestructibility. The disadvantage is that steel is difficult to machine and making a nod out of it is not easy. In addition, the metal guard is rough; it is only suitable for fishing with heavy jigs.

Boar bristle gatehouses

Very convenient when wiring, shows good bites. The disadvantage of these nods is that boar bristles are difficult to obtain. Therefore, today it is almost never used in fishing.

Nods from fishing line

For their manufacture, thick monofilament with a diameter of 0.5 mm is used. Such nods are similar in design to boar bristle nods, but are inferior in performance characteristics.

Rubber nipples and coiled springs should not be used when making nods for reelless fishing. It is impossible to make proper guards out of them that will ensure comfortable fishing.

Straight and conical nods

Conical nods made of lavsan, x-ray film or plastic bottles work better than straight ones.

There are two ways to taper this piece of gear:

cone in width - you need to trim the nod so that its end is narrower than the base;
cone in thickness - it is necessary to grind the nod so that its end is thinner than the base.

It is the taper in thickness that provides the nod with a certain play, so you need to pay attention to it. To sharpen a lavsan nod, you need to rub sandpaper along the very tip 5 to 10 times, then the same number of times from the middle to the tip, and then the same number of times along the entire length of the nod. Thus, this procedure is not at all complicated, and it will not take much time.

Setting the nod

There are three main options for nod placement for reelless fishing:

Curved. The nod must be bent so that it forms one line with the fishing line. In this case, it is quite easy for the rewinder to set high-frequency play.
Straight. Such a nod without load forms one line with the six, and bends under load. It is well suited for shallow water fishing.
Curved upward. Such guards look up without load, and straighten out under the weight of the jig. The advantage of such a nod is that it smoothes out errors in the game well.

Comments • 16

Yes, I bother with the wiring, but I really didn’t pay attention to the pauses. Thank you