How to choose a nod for a jig to ensure a catch?

Yuri 12/21/2020 1124

Have you already selected a bait with a fishing line of the required diameter for your fishing tackle? Now you need to think about how to choose a nod for the jig. After all, the sensitivity of the fishing tackle and the ability to give the bait the necessary mobility completely depend on this.

Let's take a closer look at the question of how to choose the right accessory, thereby ensuring yourself a wonderful catch.

Why is a nod necessary?

The nod is a kind of bite indicator. It also regulates the movement of the jig, because in winter the fish are not particularly active. For this reason, even having noticed an object similar to a fry, the fish will ignore it until it begins to move.

Manual movements of the jig may look too abrupt and unnatural, and are more likely to scare away the fish than attract them. But a fishing line simply tied to a rod with a jig, floating without movement in the water, is unlikely to arouse the fish’s interest.

It is precisely in order to give the bait natural oscillatory movements of a shock-absorbing nature that attract fish, and the nod under the jig is intended.

Among other things, the nod copes well with the functions of a float. Cold winter water is not conducive to violent bites. Often they are so careful and unnoticeable that if there were a float instead of a nod, they could hardly be identified. The nod will react even if the fish just touched the bait.

Winter lodges, which ones are best to use?

Winter guards are very useful when fishing if you often move and change holes with different depths. The gatehouse is usually made from a long plate of spring metal or polymer. Winter guardhouses should be no more than 15 cm, width 3 mm, thickness 0.15 mm. You need to attach a ring to the end of the guard; cambrics are not suitable, as they are frayed by fishing line. The cambric must be placed in the middle of the guard as a passage ring. At the end of the cambric that will be attached to the fishing rod you need to put a connecting ring, a ring from a braid of thick wires will do.

Depending on the bait and the expected fish caught, guards are also selected. Gatehouses are made from springs of different thicknesses. For small baits, guards are made from a coiled spring. They are thinner, which is why they vibrate strongly in the wind and last less. Also, gatehouses of different thicknesses can be made from a sheet of lavsan. Which bends well and withstands low temperatures. Winter guards are designed to transmit a bite signal, but are in no way designed to transmit vibrations to the bait. He does this poorly and will only scare away the fish. Winter nods are used to transmit vibrations to the bait.

Selection of nod by weight, length and stiffness

How to choose a nod for a jig? The nod for winter fishing is selected taking into account such parameters as the hardness of the base and the weight of the bait. Light nods - weighing up to 0.3 grams. Nods of average weight - from 0.4 to 0.6 grams. The heaviest ones are up to 1 gram. Before you go fishing, you need to test the existing jigs with the selected nods.

The following aspect should be taken into account: in an aquatic environment, the density of which is higher than air, the jig affects the nod less intensely.

Correct nod loading

A long nod is more suitable for large representatives of the fish kingdom; for rafts and perches, a quick short nod is sufficient.

The nod stiffness indicators are taken into account in accordance with the place where you are going to fish. It is quite natural that when fishing at great depths or in strong currents you will need rigid tackle. Medium-hard nods are suitable for a reservoir with a not particularly intense current - but here everything depends on the ability to play with a jig. Soft nods are optimal for fishing in large ponds or lakes.

Winter nods, how to select them for your fishing rod

Nods are very similar in appearance to gatehouses, but differ in their functions. Nods are mainly designed to transmit vibrations to jigs and spinners and allow you to see the bite process. A good nod should not be afraid of frost and water, bend well and not break. It is best to have several nods in your arsenal, varying in rigidity. Light baits should be used with less rigid nods, heavy baits should be used with more rigid nods.

The nod is of great importance for winter fishing. Each nod has its own characteristics. There is a large selection of nods in stores, but truly good ones are quite difficult to find on sale. Which and how many nods to choose for fishing everyone decides for himself, all this is determined by the fishing experience and preferences of each fisherman individually. Some fish with two nods for all baits, others select a nod for a specific bait.

You need to select the stiffness of the nod so that when fishing with bait with a nozzle, the bending angle is approximately 45 degrees; when fishing with bait without bait, the bending angle should be approximately 30 degrees. When fishing with baits such as “devil” or “goat”, the bend of the nods should be upward, so that when fishing, under the weight of the baits, the nod will be horizontal. But these are general requirements for nods. With experience, the angler himself chooses the rigidity and bends of the nod.

The main purpose of a nod is to transmit vibrations to the nozzle. This tandem should work well. First you need to choose a jig, depending on the fishing location, then select a nod under the jig, so that the vibrations of the nod and the nozzle are synchronous. Depending on the change in depth, you will need to change either the nod or the nozzle. When fishing with a jig, a nod made of lavsan is usually used; for heavier baits, it is better to use a nod made from a watch spring.

How to attach winter guards and nods to the rod of a fishing rod. The simplest thing is to use a small piece of wire insulation. A hole with a diameter of 1.5 mm is made near the central hole. In the central hole you need to insert a guard or nod, and the tip of the fishing rod, so that a piece of insulation fits tightly and fixes the nod plate. With this fixation, you can change the rigidity of the nod by extending it or hiding it further in the ring. Insert a Teflon casing into the second hole; the fishing line should pass through it freely.

Experienced fishermen make several nods at once and immediately select jigs for them. It is better to immediately find a plate of the required width than to cut it, this may change its properties. As you can see, making nods yourself is not very difficult. But stores sell different versions of nods. For example, with self-oscillations, although they are harsher and more difficult to tune to the oscillation frequency. Experience in winter fishing shows that the simpler the nod, the more durable and practical it will work.

Choosing a nod when fishing with bait

Fishing with a jig with bait in winter is a classic option (nods for a winter jig). When playing fast, you need to select a nod with a bend level of up to 30°, and a maximum length of 10 cm.

The slow motion of the tackle when bottom fishing requires other parameters - nod bending up to 50°. This parameter clearly indicates the moment the bait touches the bottom surface.

Baitless fishing

To catch fish with a jig without bait, you need a nod with a bend level of up to 30° and a length of up to 10 cm. These are the parameters that will ensure the active play of the tackle, which promotes biting.

How to make a nod yourself, no worse than the factory one

Take a lavsan plate and cut a strip 10-15 cm long. The strip should be conical. Sand the cutting edges with sandpaper. Where the narrow part of the strip is, make a hole at the tip with a diameter of 0.5 mm. A hole with a larger diameter will affect the flexibility of the nod; a smaller one will freeze quickly. If the working part of the nod is longer than 5 cm, then in the middle you can make a hole for the fishing line.

It is more difficult to make winter guardhouses and nods from metal. From a clock spring you need to cut a narrow strip into a cone. About 0.15 mm thick. If the jig is incorrectly matched to the nod, the oscillations will not be synchronous, the nod may oscillate and the jig will remain in place, or vice versa, the jig will shake, but the nod will be motionless. This may occur due to the fact that water dampens the vibrations of the fishing line. To prevent this from happening, make several wide swings with a nod so that the jig oscillates, then gradually reduce the amplitude.

Metal nods are usually made for sale. Because they are not easy to make and you don’t always want to tinker with them. It's easier to buy yourself a few pieces in a set. You can also make nods from bristles, such as boar or horsehair. They work well with small jigs and in strong winds. Such nods have several disadvantages: they quickly deform, delaminate, break and do not tolerate severe frosts.

Let's look at the types of nods

Metal nods.

Metal nods require constant care. Since metal tends to rust, stainless steel nods are more expensive and are not so easy to find. The play of these nods is different from the play of nods made from other materials. Their main advantage is their stability in the wind and they work well with heavy baits.

Plastic nods.

These nods are in great demand among fishermen. They are made from a wide variety of plastics. The plastic nods are quite durable, elastic, and bend well. They tolerate cold weather well. Such nods do not require special care. If necessary, they are well processed. They are inexpensive and can be stored for a long time.

Carbon fiber nods.

Nods made using modern technology. They are in great demand among fishermen. They are made from the same material as fishing rods; many people make them from broken fishing rods, cutting narrow strips from them and processing them. The nods play well, have great flexibility, and hold up well in the wind. By cutting them yourself, you can cut them to fit any bait. But there are also disadvantages to such nods. Since fishing rods are made from different types of carbon fiber, the nods also have different properties. Carbon fiber is also fragile, so you need to work with it carefully. It must be handled carefully, taking precautions. To prevent dust and chips from entering the respiratory system, treatment can alternatively be carried out under running water.

Combined nods.

Nods made from several materials. They are mainly made of metal and plastic. A spring is made at the base of such nods. Making them is a complex process, so it’s easier to buy them if you don’t have experience in their production. But it wouldn’t hurt to have such nods. With the help of them you can make frequent, small or smooth play in one place. They hold up well in the wind. In terms of versatility, they certainly lag behind other nods, but are well suited for beginner anglers.

How to pass fishing line through a nod

There are two ways to pass fishing line through the nod. For some, the fishing line is passed through a hole, for others through a cambric. I don’t know which nod is better, there are so many fishermen, so many opinions. Now I will describe the pros and cons of both methods, and you can decide which method is more convenient for you to use. A nod with a hole is lighter, has less residual vibrations, and is easy to do. This nod is mainly used by sports fishermen. But it also has disadvantages. It is wider where the hole is made. The wider the nod, the worse it is for them to catch in windy weather. Water also freezes in the holes, which also interferes with fishing.

To make the nods bend less, they have to be made shorter, and this also affects the performance of the baits. Nods with cambrics do not have such disadvantages. If you take suitable plastic, you can make a wind-resistant, durable nod. The fact that a cambric-shaped load appears at the end is not a minus; under certain conditions it can work to your advantage. For example, they can make frequent oscillations. Which cannot be achieved with a lighter nod. The hand gets tired less, since the nod itself does all the vibrations, this is good if you spend the whole day fishing. And the cambric does not freeze in the air. Such nods have only one drawback, it is more difficult to do.

How to equip a nod

Most of all in cambric nods you need to pay attention to the tips. As a rule, a loop is made on them, and this loop should be vertical in relation to the nod, some make a horizontal arrangement. A vertical loop is better visible when playing, it sways less in the wind, and this version of the loop is easier to make. You can also make a loop from fishing line. And another important detail is that the tip should be two or three colors. So it is better visible in any weather.

Source: rybalka48.ru

Manufacturing materials

Depending on the conditions of use, the material of the nod must have a certain margin of safety. We present to you the most common materials from which nods are made.

Metal

The metal nod does not particularly respond to the weight of the jig. Deviation indicators are from 5° to 10°. If the process of fishing is carried out without bait, no response hesitation can be expected from him. In fact, such a nod is practically a continuation of the whip. Therefore, in order to ensure at least a semblance of play, you need to make movements with a large amplitude. Such nods are designed for catching large-sized fish with a large jig.

Plastic

A nod is made from this material in the form of a spring or a thin plate. If the plastic nod is bent downward, this is good for perch fishing. The jig makes sharp jerks, which really attracts it. The upward-curved part of the nod is for low-amplitude bottom fishing.

Lavsan

The optimal material for making nods is budget-friendly, sensitive, and durable. But it enjoys little popularity due to low frost and wind resistance, so it is more often considered as a version of the “summer nod jig”. But still, there is hope - recently options with frost-resistant additives have appeared.

Silicone

In terms of softness and sensitivity, it is not inferior to lavsan. If you like silicone nods, purchase several sets at once for the season - they quickly wear out and lose their elasticity.

Pig bristles

A natural product, most often in a homemade version. These days it is rarely used, due to the fact that it is successfully replaced by artificial materials. However, there are still originals that use this highly sensitive tackle. To protect the delicate structure from side winds, place it in a thin spring.

Metal and plastic

The nod itself is made of plastic, with a metal tip. Convenient if the bait needs to be given small, frequent vibrations.

Carbon fiber

Most often, such a nod is the upper fragment of an old spinning rod or fishing rod. In terms of bending and functionality it is close to metal. However, it is less durable.

Polyamide

Nods from this material are often made independently. After all, polyamide is, in fact, a material from whose derivatives fishing lines are made. It is enough to wind the fishing line onto a knitting needle or thin wire, boil the structure for several minutes in boiling water, and the ultra-sensitive nod is ready. True, it is not particularly reliable - rather, it is a disposable version.

Any nod, regardless of the material, sometimes needs to be refined - determining the optimal length and processing for the desired degree of sensitivity. Sometimes nods are sold without painting (this is especially true for silicone and lavsan models). The problem of the visibility of the nod against the background of snow cover will be solved by bright nail polish. Apply a few drops along the nod.

Happy fishing!

How to choose

For glitter

It is believed that plastic and silicone nods for such fishing are more durable and more flexible.

Many fishermen are sure that winter trolling should be done only with the help of a whip; nodding during such fishing simply unnecessarily complicates the design. But with hard whips, a nod can still be useful. Just don't make it long. 3-5 cm is just right.

On the jig

For fishing with a light jig, lavsan nods . They are sensitive, practically do not make false movements, and are easy to make yourself. The disadvantage of the gear is its poor resistance to wind.

For heavy jigs and windy weather, metal guards .

For balancer

It’s most convenient to use lavsan here, only for the balancer, and not for the jig, this nod is wider.

You can try silicone or snot (this, simply put, is a kind of soft spring made from boiled fishing line), only in cold weather they are less effective.

Is the type of nod that matters?

It is already clear that this important detail determines what catch the fisherman will return home with. It is not always possible to find a suitable nod for a fishing rod in the trading network, so many amateurs resort to making homemade nods, using a variety of materials suitable for this purpose, even watch springs. The remarkable thing is that sometimes it is the nod from the clock spring that will provide the craftsman with a good catch.

Winter fishing with nods

The literature available to help fishermen, the Internet, and experienced fishermen themselves describe in some detail the advantages of various types of nods, dismantling different models literally “to the bones.” Maybe that’s why someone thinks that you shouldn’t bother yourself and create problems - just take what you have at hand and go fishing. Only when such a fisherman returns home empty-handed over and over again, and those fishing nearby carry their catch in a “bag,” does he realize that he should be more attentive to his equipment, that the smallest detail can have a big impact. This is where we should consider in more detail the types of nods, their advantages and disadvantages.

Conversations with many experienced fishermen showed that opinions on this issue can differ radically - what is good for one is absolutely unacceptable for another. With any method of fishing - with baits and lures, with baitless lures, some prefer metal guards, some prefer lavsan, and some combine both options. Fishing conservatives still prefer “good old bristles.”

Types of nods for ice fishing

With all the diversity of opinions, all fishermen note that everyone should develop their own style. It is necessary to try different models of nods in practice, abandoning the inconvenient ones and choosing those that in your hands will provide an imitation of the game of bait, guaranteeing a bite. At the same time, those types of nods that did not suit you personally should not be classified as bad. For example, it may happen that when switching from bristle guards to lavsan guards, the effectiveness of successful bites will sharply drop. It seems that the game has become more stable outwardly, but there is no result. And the point here is no longer about a “good” or “bad” nod, but about the method of play - wrist or elbow drive. When you develop techniques for casting with a lavsan nod, things will immediately go smoothly, and fishing will become a complete pleasure.

We can talk about many cases when the nod played a decisive role in winter fishing, but it is worth paying attention to the approach to their choice.

Equipped with a fishing rod and jig

The nod is the main working element of a jig fishing rod. This part of the equipment is directly responsible for playing with the jig and recording fish bites. Depending on the fishing methods, the configurations of the guardhouses differ. Close attention is paid to the setup for game fishing, in a reelless or baited version. An article about setting up a nod in a rewinder. For gear on a riser with a float or guard, it is enough to select a form for the weight of the bait. Here he is only responsible for fixing the bite and lightening the weight of the bait when lifting (while the fish is pulling the jig into the mouth). Read more in the article about nods for winter fishing rods. Here we will take a closer look at how to choose the right nod for a classic jig, with bloodworms attached.

About setting up the jig when assembling winter tackle

02/07/2017 admin

A significant part of winter is still ahead, and, I hope, with it you and I will have more than one successful day spent fishing. It must be said that among fishermen there is a clear division according to the method of fishing. Just like in the summer, when, of course, there are much more types of fishing, in the winter many specialize in only one thing. Most often it is either a winter spinner or a jig. Even though I sometimes fish with a spoon, a jig is still beyond competition for me. Without a doubt, this is the most common ice fishing gear in all countries. Naturally, we are talking about those countries where ice generally occurs. Why has jig gained popularity all over the world? First of all, because of its simplicity. This is why she is appreciated. What could be simpler than a loaded hook? Probably just the hook itself. But it is almost impossible to lower it to the bottom, much less create any kind of game.

Many fishermen are attracted by the indescribable drive that you feel when landing a fish, because between you and the prey there is only a fishing line, and a very thin one at that. The result of the fight depends only on your skill and quality of gear, which undoubtedly adds spice to the experience. In general, fishing with a winter jig is very dynamic. You know exactly the moment of the bite and can begin to act as soon as you see it. In fact, a fraction of a second passes from the moment the fish attacks until it is hooked. There is nothing supernatural about jig tackle. Its composition is simple: a jig, a fishing line, a nod and a winter fishing rod (meaning a rod for winter fishing). At the same time, every self-respecting angler selects its components independently, based on personal preferences.

Naturally, you can go the simple route and buy a complete fishing rod, but I would warn against this approach. Even though I’ve never seen anything similar to working gear on sale, I still had to change everything. And as you know, it’s better to do something from scratch than to redo it. And, in my opinion, this is the right approach. Everything in our tackle is important: the jig, fishing line and nod must be chosen correctly.

It is about the correct self-assembly of the gear that I want to talk about. The main element of jig tackle is undoubtedly the bait itself. There is plenty to choose from. On store shelves you can find a wide variety of jigs - from the banal “ball” to imitations of various insect larvae. With all the wealth of choice for average fishing, I recommend the “drop”, it is the most versatile.

The main purpose of the jig is to quickly feed the nozzle to the desired depth. Another task that it must solve is to attract fish through animation. The shape of the bait helps with this. The classification of jigs includes basic parameters. The main one, without a doubt, is size. The minimum that can be found in stores is 2 mm. But athletes can use even smaller baits, but for amateur fishing they are not needed. A kind of standard are jigs with a thickness of 3-4 mm, but in some conditions much larger ones are required, for example, when fishing in a strong current, 10-12 mm ones may be needed.

Jigs vary in color. The most common ones are silver, copper and gold. As a rule, these are galvanic coatings. However, by and large, the color of the jig can be made to almost any color if you use paint. This coating is called “coating”. There is another important parameter that not all manufacturers indicate, namely weight. It depends on the material from which the body of the jig is made. The heaviest baits are made of tungsten, or rather its alloys, in which the content of the “title” metal may vary. This explains the fact that “tungsten” jigs of the same size have different weights. Cheaper and lighter baits are made from an alloy of lead and tin.

Serious anglers most often prefer tungsten jigs. There are two ways to produce them. In mass production, metal powder metallurgy technology is used, i.e., tungsten powder is placed in molds, and thanks to high pressure, the powder is turned into jigs. Using this technology, the body of the jig is given any desired shape. The price of these baits is kept within acceptable limits. Most Russian manufacturers order the tungsten jig body from Chinese factories, but soldering of the hook and painting are done in our country. Turning jigs from tungsten rods of different diameters is a more complex method, considering how hard the metal is. It is difficult to achieve a variety of shapes using this method; as a rule, they are made in the shape of a ball or a drop.

A hook is soldered to the manufactured body. On the correct models this is done using special holes. On such baits, with a certain skill, the hook can be resoldered. However, in some jigs it is soldered directly to the body with a ring remaining outside, through which the bait is tied to the fishing line. In this case, small fly fishing hooks are usually used.

The quality of the hook plays an important role in the catchability of the bait. It depends on him whether you catch the fish or whether it breaks while fishing. Often, in order to save money, manufacturers use low quality hooks. Before purchasing, be sure to pay attention to the quality of the hook. Good catchability depends not only on the quality of the hook, but also on its size. And it largely depends on the type of fish you catch. For some, a small hook is good, but for others, on the contrary, you cannot do without a large one. The optimal size is usually determined experimentally.

There are two ways to catch fish with a jig. Most anglers prefer the so-called “stand”, without playing with bait. She lies at the bottom most of the time. In this case, the shape of the bait does not matter much; the bait comes into play. It is she who may be interested in the approaching fish. The jig is needed more as a sinker to deliver the bait to the required depth. The bite will undoubtedly be influenced by the size of the bait and partly the color. Many fishermen use two jigs at once: the lower one, the so-called cargo jig, and the upper one, which is much smaller, and cautious fish bite on it. Instead of the second, a front sight is sometimes used.

But for the way I fish, namely by playing, the shape of the jig is of great importance, since additional vibrations of the bait depend on it. To create them, additional recesses or flats are given to the body, or a jig of an asymmetrical shape is initially made. This allows the bait to make certain movements in the water while playing with a nod. The flatter the body, the more actively it will vibrate. Naturally, without the fisherman, or rather, without his game and properly configured gear, nothing will work. Everything is important here. The tackle should have three elements harmoniously combined - a jig, a fishing line and a nod. What does it mean? Each element influences the others. You must give the jig the vibrations that you want. And of course, you need to feel the bait subtly.

This can be achieved as follows. First you need to decide on the thickness of the fishing line and the size of the jig. You cannot tie a small bait to a thick monofilament thread. Each fishing line has a certain buoyancy, which simply will not allow the jig to sink or will make this process so long that fishing will not be a joy. And the greater the fishing depth, the longer the bait will sink.

And although fishing line thicker than ∅0.15-0.16 mm is rarely used in winter fishing, it will also be difficult for a small 2.5 mm jig to quickly sink to the bottom at a depth of 4-5 m. Of course, if you fish with much larger fish jigs, then such a problem is unlikely to arise. But at the same time, the number of bites will decrease sharply. After all, not every fish can like large bait. And even if a bite happens, the trophy may not be detected. That's why balance is needed. It must be selected based on the depth at the fishing site, the presence of a current, the type and weight of potential trophies.

For amateurs, a 0.12 mm fishing line and jigs with sizes from 2.5 mm to 4 mm are quite suitable. For those who are just starting to engage in winter fishing, it will be enough to have 5-6 fishing rods with baits of different sizes, designed for certain depths. Experienced fishermen, and especially athletes, have in their arsenal more than a dozen fishing rods on which jigs of different sizes and colors are installed; such selections of customized winter fishing rods are often duplicated two or three times, for quick changes during breaks. Another important factor is the correct position of the nod with the suspension of a particular jig. It is needed not only for the visibility of the bite, but also for the necessary transmission of vibrations to the bait by hand for its correct play. This is achieved either by adjusting it in length, or by adjusting it mechanically.

You can find a fairly large assortment of nods on sale. Mostly there are nods made of metal and plastic. Basically they are in the form of a thin plate, but they also come in the form of a twisted spring. Athletes use only plastic nods. They are the easiest to adjust to the weight of the jig; to do this, they can be easily treated with sandpaper. This can be done in the following ways. You can initially cut the nods from the material of the required thickness, and then make holes in them for the fishing line, or you can sand down the thicker one with sandpaper to the desired size.

Each jig needs its own nod. To test their balance, the bait is suspended from the front hole. The nod is bent at a certain angle. This moment is individual. The best position for nodding is considered to be at a 45° angle. At the same time, other athletes have their own opinion on this matter. But to each his own, there are anglers who deviate from these rules and overload the nod to a greater extent, or underload it, since over many years of fishing experience they have their own experience and are accustomed to their nod settings.

I believe that the overloaded state of the nod allows you to fish with the tackle in strong winds. Conversely, when underloaded, it will shudder at the slightest gust of wind. This will certainly cause the angler to overreact to false nod triggers. The length of the nod affects the amplitude and frequency of the game. And the shorter it is, the more small fluctuations you can create per unit of time. This is not always necessary. For example, to catch white fish you need a smooth game, for which longer nods are used.

In sport fishing, nods with a length of 20 to 80 mm are used. This is due to the complexity of the work due to the influence of external factors. Many amateur fishermen often see metal nods, which are much easier to use. Their bending under load is regulated by the degree of extension of the steel spring from the mount. That is why they have a fairly wide range of applications.

One of the disadvantages of this nod is that it makes high-frequency play, which is necessary when fishing for perch, almost impossible, but it is ideal for fishing - roach and bream. Another nod often used by anglers is a silicone tube with a fishing line threaded through it. Such a nod cannot convey high-quality play to a jig, but the bite will be visible. Such products can be useful for stationary gear, which, of course, greatly limits the fisherman’s capabilities. There are nods made of a twisted spring, but they are rarely used for jig fishing, although they can transfer a certain game to the jig.

The last component of the gear is the fishing rod. This is not to say that this is the most important part, but a lot depends on it too. The simplest one is “filly”. I almost never use these, but many hobbyists have them. The main advantages are simplicity and light weight. One of the disadvantages is the inconvenience of winding up the fishing line, which means accurately adjusting the descent. Most often, such fishing rods are used by those who fish with standing tackle with a fairly thick line.

For game fishing, the balalaika is much more convenient. There are a huge number of their varieties. I fish with these exact rods and consider them ideal. There are both very good models and frankly unsuccessful ones on sale. The main disadvantage of many products is the poor rotation of the reel on which the fishing line is wound. Ideally, it should spin without tension even from a light touch. Many anglers fish with open reel rods. I find them heavy and not very comfortable.

It is not customary for Russian fishermen to use reels for catching fish. We fish by intercepting the fishing line with our hands. But our overseas colleagues everywhere have gear with high-speed reels. I tried fishing with such a fishing rod and I can say that it is very suitable for catching large fish, but for small fish it is not very convenient, since the process is very slow. In addition, due to the length of the rod, it is possible to create only smooth and sweeping vibrations, which are attractive only to large fish. And in the cold, using American fishing rods is problematic because of the mechanical parts that freeze, especially when water gets on them.

But for those who fish in a tent, especially for bream, I would recommend taking a closer look at such gear. Not only can you catch almost any fish with this fishing rod, but you will also never tangle the line, which often happens when fishing in a tent from great depths. Unfortunately or fortunately, the development of the jig as a tackle is practically non-existent. It is possible to achieve the best results in this method of fishing only by using the best fishing rods and equipment, as well as by mastering the fishing technique.

These articles may interest you

Fishing for burbot in February in the Urals
Fishing on the Sheloni River along the path
Fishing on the Vychegda River
Fishing from ice in spring for perch on Lake Mostovoe, Altai Territory
Fishing in Udmurtia in the vicinity of Izhevsk
How to fish with floats with replaceable antennas

Fishing in the region:
Fishing during the seasons:
Fishing:

Our gear

Ice fishing lures

It's easier to find fish in winter. No need for a boat, no grass getting in the way. A couple of holes are needed. Fish are caught using the same baits as in summer.

A common winter bait is bloodworms. These are the larvae of the mosquito mosquito; they can live at sub-zero temperatures. Their bright red color is clearly visible to fish. To attach the fish to the hole, they use different smelling dough; in winter it does not disintegrate as quickly as in summer.

But the main bait for winter fishing is the jig. This piece of equipment, simple to manufacture, has made a real revolution in fishing. In addition to the winter period, you can use it to catch fish vertically in the summer.

For successful fishing, you need to select a jig that matches the fishing tackle and fishing location. The advantage of this bait is that they are easy to make at home. Occupying little space in a fisherman’s arsenal, they catch peaceful and predatory fish without any attachments or bait.

The most catchy winter jigs: