How to tie boilies to a hook: methods and recommendations

April 26, 2019
Miscellaneous
Dmitry Donskoy

A package of boilies on the market costs about 100 rubles. There are balls of different sizes, smells and colors for effective carp fishing. Experienced fishermen, in order to save money and increase the productivity of their catch, purchase different types of bait and test them in practice.

If the fish is interested in corn or test products, then prepare the bait yourself, based on the additives from which the purchased version is made. The ball is additionally treated with flavorings to enhance the bite. In addition, you need to know how to properly tie boilies to a hook so that they do not fall apart.

Varieties of bait

Dusting (soluble). These types of balls have the advantage that they dissolve in water, leaving a trace and odor. The fish, sensing the bait, begins to actively search for it. In this case, you can take advantage of the moment, throw in the tackle and catch the carp. The downside is that the bait takes a long time to digest, since boilies for carp are made from dry food that is severely frozen so that they do not disintegrate.

Insoluble. These balls play the role of bait, not feeding. They are made using special components and subjected to heat treatment. When the bait gets into the water, it retains its shape for a long time. The boilie consumed by the fish will be quickly digested. Therefore, the individual will begin to hunt again for the second portion.

Drowning. They are used to catch deep-seated giants, which always live at the very bottom of the reservoir. It is advisable to use such baits in clear water.

Floating. Used in muddy water. You can set the depth on the rig and catch both small and large specimens. This option is good for beginners.

Tools and materials for knitting rigs

To attach the boilie to the hair rig, you need to make a through hole in it, which should be located along the central axis. Such a hole can be easily made using a tool sold in fishing stores and which is a small-diameter drill. Some companies specializing in carp fishing produce similar products equipped with an electric drive, which significantly speeds up the drilling process.

The use of special tools will significantly simplify the process of knitting hair accessories. How to make a hair mount on a carp

To pull the leader loop through the hole, the angler will need another tool, whose design resembles a knitting needle. To place a boilie on a hook, the pointed end of the knitting needle, on which there is a small hook, is threaded into the hole made in advance.

The driving loop clings to the hook of the knitting needle and is pulled into the hole, after which the attachment is fixed. In addition to these tools, the carp angler will need a few more elements:

silicone cambrics of various colors and diameters,
stop beads,
swivels,
forged metal rings,
limiters.

Beginner carp anglers often make the mistake of using monofilament or fluorocarbon monofilament as leader material. The fishing line is not suitable for these purposes because it has a rather rigid structure and does not allow the bait to move naturally in the water. When using fishing line as a leash, the number of slips increases sharply, since the hook moves in the fish’s mouth along the wrong path, which is also due to the excessive rigidity of “fluorocarbon” and “monofilament”.

The leash of boilie equipment must be made of a special leash material, which has a very soft structure and does not hinder the movement of the bait in the water. A four-strand braided cord, which is used in feeder or spinning fishing, can be used as a leash material. During fishing, the leash lies on the bottom and often comes into contact with the sharp edges of shells and other hard objects, so multi-strand cords should not be used to install the boilie on the hook. Multi-strand “braid” does not tolerate abrasive loads well and even with minor damage significantly reduces its strength characteristics.

Self-cooking and recipes

At home, boilies are made from powdered cereals, dough, and crushed grain. Chicken eggs, gelatin, beet molasses, and honey are used to glue the components together. To enhance the smell, fruit syrup, caramel, fish oil, and flavorings such as peach, pineapple and plum are used.

Liquid additives, odor enhancers and chicken eggs are mixed until smooth, mixed with flour and a piece of dough is obtained. The product is rolled out to form a sausage shape and cut into small pieces with a knife, which are given the appearance of balls.

Homemade boilies are placed in a microwave oven or in a frying pan placed on an electric stove. After heat treatment, some of the moisture evaporates and the bait hardens.

For spring and autumn carp fishing, do-it-yourself boilies:

flour from crushed fish bones – 300 grams;
salt – 100 grams;
soy flour – 200 grams;
ground seeds – 100 grams;
semolina – 200 grams;
corn flour – 400 grams.

All components are mixed and a binding component is added - honey or a chicken egg.

Attaching the ball to the hook and hair

There are different attachments for baits, some of them are labor intensive, but they provide benefits. How to tie boilies effectively:

The bait made at home is fixed to the hair with a cambric, which is mounted to the eye of the hook. A spring is attached to the other end of the thread and a ball is formed.
A loop is made at one edge of the hair, inserted into the shank of the hook from the point side, then the thread is tied in a knot, and the excess is cut off. A hole is made in the ball with an awl or a needle and a hair is passed through, secured with a stopper.
Homemade boilies are installed on the forend of the hook and secured with a spring. That is, the bait itself will be located near the head of the hook. Therefore, the bait is threaded through the top, and then the ring is tied to the fishing line. Store-bought balls that are too hard can damage the fore-end when inserting the boilie.

There are other options for attaching attachments, but these are the most popular and understandable for novice anglers.

How to attach a boilie with a hair rig

There are several types of hair accessories:

knotless;
D-Rig;
rigid equipment.

The simplest and most popular method is knotless installation, which does not require the use of additional devices. It consists of tying a loop of thin fishing line to the end of the leash with a double knot. Its other end is pulled into the eye of the hook and formed into a small loop so that the length of the “hair” is about 1.5-2 cm. This piece of fishing line can be movably attached to the hook using a small pulling ring or a piece of nipple rubber.

Before inserting the boilie, you need to pierce the axial hole in it with a needle or an ordinary awl. Next, the “hair” loop is threaded through the ball and secures it with a special silicone stopper.

The D-Rig installation provides an increased length of line withdrawal, which ensures the maximum allowable distance between the hook and the bait and increases the likelihood of self-hooking. This option is applicable only in places with a flat and clean bottom and no current.

Rigid rigging involves placing the boilie in close proximity to the shank of the hook. This installation can be used under any fishing conditions.

Special units

It is preferable to attach the balls to a bandage tape or thread made of silicone and latex. To tie boilies like experts, you need to insert the ribbon through the shank of the hook and secure it with a suitable Knotless knot. Make a hole in the bait and thread the thread through the bait, secure with a stopper. How to tie Perfect Loop knots:

The fishing line is moistened and knots are tied on both edges.
You need to thread the top loop into the bottom loop.
Pass the free edge of the fishing line through the loops without tightening.
Make a loop again and run through the top.
Next, place the made loop on the free edge of the hair under the fishing line.
A long end of the thread is formed, which is used to wrap the forend 8 times with turns tightly pressed to each other.
This edge is passed through the loop and the hair is tied in a knot.

A simple method suitable for beginners. A loop is made on the fishing line, the thread is folded in half and the hair is passed through the ring several times, the fishing line is pulled tightly together.

Tying a hook to a leash

For beginners, a simple loop knot is suitable. The strength of this fastening is 90%. How to quickly tie a hook under a boilie?

Measure 10 cm of leash and fold it in half.
On the side of the hook in the lower part, at the place of the first bend from the fore-end, apply the resulting loop.
The line is held with your finger. One end should be pressed evenly against the hook, and the other end should be wrapped around the metal rod and the main leash, creating tight turns.
Now the rings are clamped with your fingers, and the free edge of the fishing line is passed through the loop.
The leash is moistened with water and the knot is tightly tightened.

The excess end is cut off, leaving a few millimeters.

How to properly plant boilies

Boilies were invented specifically for carp fishing and are designed for its ability to suck up any bulk food. They were originally supposed to be strung on a hook, hiding its sting in the body of the bait. But over time, fishermen improved the existing gear, coming up with several alternative options.

Before attaching a boilie, you should select the correct type of bait installation on the hook, depending on the type of fish and the characteristics of the reservoir. Today, the most popular and effective way of rigging is “hair”. This method is best suited for catching large fish such as carp and bream. It consists in the fact that the boilie is attached not to the hook itself, but to the branch from the leash located next to it.

The use of this type of installation significantly increases the likelihood of hooking and self-hooking of the fish due to it swallowing the bare hook. However, such equipment is not always suitable for fishing in currents or in places with difficult casting. A boilie dangling on the line causes the tackle to twist. Therefore, the traditional method of setting bait has not lost its relevance. Many fishermen successfully use it when catching carp fish with a regular bottom, rubber band or float rod in strong currents or other fishing difficulties.

Making a stopper

There are several ways to make your own limiter, but this option is the simplest. The work will take 5 minutes. A homemade stopper for boilies is made like this:

The rubber O-ring for plumbing or other similar parts must be cut into pieces. Its diameter is 3 mm.
Using the thinnest possible needle, pierce the workpiece from the end. Cut the side of the ear completely.
The line is passed through the ring of the needle. The tool is threaded completely through the workpiece. The tool is removed through the slot in the ring.

You can make many limiters this way. How to tie a boilie and fix it - pass the hair through a loop on the fishing line with a stopper, and pull the stopper onto the leash. However, the price of the stopper is 15 rubles. for 6 pcs. Therefore, the purchase will save time.

Practical recommendations

There are various fishing techniques. You need to know the topography and depth of the reservoir, what time the fish feed, and what they eat. You can catch weighty specimens if you follow the basic rules:

Suitable odor enhancers should be selected.
In spring, carp love proteins, and in summer – carbohydrates.
Soluble boilies are used for bait.
Insoluble balls are used as bait.
It is preferable to experiment with multi-colored balls.
For muddy ponds with muddy bottoms, you need to choose floating baits.
The size of the hook is selected according to the size of the boilie.

A fine drill bit will not destroy the bait while piercing. To quickly tie a boilie like experienced fishermen, you should practice.

Catching carp with boilies

There are a lot of methods and techniques for catching carp, but what they all have in common is the use of such a popular and effective bait as boilies. The first boilies were made from semolina , a mixture of soy and corn flour and raw eggs in the early 1980s and have since become a favorite among fishermen around the world.

Some are attracted by the variety of ready-made multi-colored balls with various odors, while others experiment at home, developing their ideal bait composition. It is better to take ready-made boilies if you are fishing in an unfamiliar place and do not know the tastes of the carp that live there. So, having tried several different tastes and smells , you will find the most tempting bait and will be able to stock up well on the delicacy for your next fishing trip, including repeating it at home yourself.