What is a feeder rod: classification and types

To achieve success in fishing, you need not only to carefully choose a place, bait and bait for fishing, but also purchase all the necessary equipment. Gone are the days when fish were caught using dried reeds or bamboo sticks, and now even the novice fisherman has access to the best reels, lines and, of course, rods.

This applies to fans of all types of fishing:

carp fishers;
spinners;
floaters;
milkers;
feeders.

The feeder theme has become very popular in Eastern Europe over the past 5–7 years, although the British invented fishing tackle with a feeder more than forty years ago. The feeder rod has characteristic features and, first of all, a quivertip - a flexible tip that functions as a bite alarm. This is convenient for the fisherman because there is no need to use additional equipment such as electronic bite alarms, bells and other guards.

This increases the mobility of the fisherman and provides convenience, because you can sit on a small area of the shore, or even in the water, using a special adjustable seat, or a feeder station. A feeder is a tackle for fishing from the bottom, and it embodies all the advantages of other types of donks.

This applies to:

What are feeder rods?

The feeder structure consists of:

blank (fishing rod body);
handles;
spool holder (reel holder);
plug connections;
pass rings;
quivertypes.

Each fishing rod comes with 2-3 quivertips (replaceable tips), with different test, for fishing in a variety of conditions. Since the stiffness of the tips is different, before assembling the rod, the angler chooses the quivertype that will be more sensitive for a given body of water.

If there is a current, it is better to put a rigid tip, which, after casting the tackle, will take the correct position and signal a bite. In the absence of a current, a less rigid quiver tip is installed, which is capable of “recognizing” the most delicate bites of small fish.

Usually the tops are designated by different colors:

yellow;
red;
green.

According to generally accepted rules, the green tip is the softest, and the red tip is the hardest.

The form or body of the feeder is the main part and for its manufacture the following are used:

carbon fiber (carbon);
composite materials;
fiberglass.

Form

The reliability and strength of the fishing rod, as well as its weight, depend on the quality of the manufacturing material, because, say, carbon is lighter and stronger than fiberglass, but it also costs more. Considering that after throwing the feeder into the water, the rod is installed on stands, its weight may not seem to be the most important characteristic, since you do not have to constantly hold the rod in your hands.

But catching small fish on a feeder is fast, requiring frequent recasts, and if you come fishing not to pump up your muscles, but to have fun, then the weight of the form matters. Carbon fiber feeders are the strongest, but this does not mean that fiberglass or composite rods will break after the first casts.

Each form is characterized by test indicators that indicate what weight feeders should be used with it. At the same time, the cost of carbon is higher and it is not always necessary to spend money on an expensive feeder, especially if you plan to fish at short distances with light weight feeders. The fisherman chooses a feeder based on the price-quality ratio, and everyone has their own preferences.

Lever

The angler is in direct contact with the handle of the rod and it should be comfortable so that the feeder fits well in the hand.

For the manufacture of handles the following is used:

cork;
soft EVA material.

Cork is more durable, and EVA is more pleasant to the touch and cheaper. Both materials are quickly washed off from dirt, and this is also an important point. The handles are spaced and solid, and their length depends on the length of the feeder. The longer the feeder handle, the greater the leverage will be during casting, so long-range feeders are equipped with long handles.

Passing rings

Not all feeder fishing enthusiasts understand how important rod guides are and what they should be like. A larger number of rings than on other types of rods is an undoubted advantage of the feeder, increasing its astringent properties when playing caught fish.

The material of manufacture, design and number of rings are especially important when fishing with braided fishing lines, which exert a serious load when casting onto the ring inserts. The characteristics of any feeder must indicate the number of rings and the material of the inserts, although, unfortunately, there is no such marking on the forms.

But every reputable seller should have equipment catalogs that contain all the data, including those related to rings. For fishing with a line, you should buy feeders with silicon-coated metal-ceramic inserts (SIC).

Expensive fishing rods are necessarily equipped with rings with inserts, but in any case you need to make sure that they are there. The greater the number of rings on the form, the better, because they help distribute the load evenly. The type of fastening of the rings also deserves attention and it is better to have three legs rather than two.

Important! When buying a feeder, make sure that there are no burrs, cracks or chips inside the rings.

Reel seats

Feeder rods are equipped with reel seats for attaching a reel.

They are:

open rear screws;
front screw.

Open rear screw clamps are equipped with a nut, with which the coil is firmly fixed in the stock. The front screw reel seat is essentially a decorative cover for the screw clamp. The front clamp holds the reel more securely and looks more aesthetically pleasing than the rear one. But its price is also higher, and for a long time, expensive feeder models were equipped with clamps for coils of this design.

Now the situation has changed and such clamps are also installed on budget fishing rods, but this affects their cost. The open rear lock sometimes unwinds in the fisherman’s hands, and at the most inopportune moment, and its reliability is still lower. The main task of the reel seat is to securely fix the reel, and other characteristics do not play a decisive role.

Important! When buying a feeder, check whether the reel seat fits the reel you plan to use with it.

You can find out more detailed information about quivertypes in a separate article on our website.

Rod build

Not all manufacturing companies indicate the action of the rod . Therefore, to ensure the quality of the chosen model, you need to have it checked right in the store. To do this, we place the product vertically and attach the maximum weight of the feeder to the tulip, which is stated by the manufacturer. Then, without removing the weight, we place the model in a horizontal position and see in which segment it bends.

You can do it differently. It is enough to assemble a model without a quivertype and shake it by the butt, then see in what segment it will create vibration. The more sections vibrate, the “slower” the rod is. Ask the seller for advice.

If you choose a feeder and braided line as the main line, then choose soft and slow rods . The feeder tackle is long, so hooking when using a non-stretching line can result in a torn fish lip, especially with a hard (fast) fishing rod. Some may disagree with this, citing the casting distance and accuracy, but a slow feeder rod usually casts further than a fast one, this is due to the fact that the entire blank comes into play, and not just one tip. While the process of adaptation is underway, the distance can be adjusted using a reel, fixing the line with a clip.

A slow rod also helps when bringing out fish; with it, the jerking of the fish subsides. Thus, the first feeder rod should be soft.

An angler who goes fishing at least once a week makes more than a thousand casts in one season, so he has already gotten used to it and casts his fishing rod “automatically.” If he had a “slow action” tackle in his hands, then having picked up a fast action model, he lets go of the line a little later. It turns out that a fast action product throws closer. From all this it follows that time is needed to adapt . Those who use both systems do not have such problems.

Types of feeder rods

Feeder rods come in two types:

telescopic;
plug-in

Each type has its own characteristics, advantages and disadvantages, which the angler should know so that there are no problems while fishing.

Plug feeders

The advantages of plug feeders are that they:

used on any type of reservoir;
have a maximum length for feeders;
durable and reliable;
lungs;
sensitive;
durable;
have excellent technical characteristics (in particular test).

That is, having a plug feeder, an angler will be able to catch both roach on the river and large carp on a commercial or wild pond. Thanks to the plug connection, these feeders are stronger and more durable than telescopes and feeders weighing 100 grams or more and deliver over a distance of 150+ meters.

You can't cast that far with a telescope, and this limits the angler's capabilities. There are situations when the fish stands on distant lines and even with the help of constant feeding it is not possible to lure it closer to the shore. Having a plug rod can easily solve this problem, but with a telescopic rod you will have to be content with “chupa chups”, or the lack of a catch.

To perform super-long throws, a fisherman needs to master a special technique, but a beginner can also cast a pole at a distance of 80+ meters, which already allows him to catch trophy fish. The low weight and high strength of such rods are especially valuable for anglers and therefore they are more common and popular than telescopic blanks.

Another important advantage is the wide range of plug rod tests. There are forms with dough up to 60 grams, and there are up to 200. For catching trophy fish, powerful feeders are chosen, but for delicate fishing for crucian carp or roach, blanks as light as a feather with small tests are suitable.

But plug feeders also have disadvantages:

inconvenience in transportation;
high cost compared to telescopes;
sensitivity at the joints and when sand or dirt gets in, they quickly collapse.

Anglers who have personal transport have an easier time transporting equipment and, in particular, fishing rods. Even forms 4.2 meters long from two elbows fit freely into the machine and do not cause inconvenience. If you have to get to the reservoir by bicycle, motor vehicle or on foot, the transport length of plug rods becomes a problem and it is inconvenient to carry them even in cases.

The cost of plug-in forms is higher than telescopic ones and this is due to the peculiarities of the feeder manufacturing technology. This argument is not relevant for every angler, but you need to know about it before you go shopping.

When assembling the plug feeder before fishing, and accordingly, disassembling it after finishing, you need to carefully ensure that sand does not get into the joints, because this will quickly deteriorate and the rod will have to be repaired. With careful use and storage in the case, there will be no problems, and the rod will last for many fishing trips.

Telescopic feeder rods

The invention of telescopic rods made life much easier for fishermen, and after similar equipment appeared among floaters and carp fishermen, it came to feeders as well. Such rods consist of 4–6 legs equipped with rings and inserted into each other, which significantly reduces the size of the folded blank.

First of all, it is convenient for transportation, and this advantage is especially appreciated by those who fish with a feeder from a boat. It is difficult to move along the river if there are 3.6 meter long rods on the boat, and this is not the limit for feeders. In addition, the cost of telescopes is lower than that of plugs, and the price plays a decisive role for some anglers.

A fishing rod for feeder fishing should be comfortable, but its other characteristics must also be taken into account.

Advantages of telescopic feeders:

short transport length;
acceptable price;
quick preparation for use and dismantling after fishing.

They can also fish from the shore with feeder telescopes, but usually their length is limited to 270–300 cm, and you won’t be able to cast a feeder with bait far with such a rod. A large number of elbows reduces the strength of the blank, so the feeder test does not exceed 60–80 grams, which means you cannot catch heavy fish with them.

Disadvantages of telescopes:

small test indicators;
low reliability;
inability to fish at long distances;
length restrictions;
greater weight compared to plugs.

We can say that feeder telescopes do an excellent job of their tasks when fishing from a boat and at close range, and these are the optimal modes of their operation.

Beginners in feeder fishing are recommended to start fishing with inexpensive telescopic forms, and after gaining experience, buy more expensive plug rods.

Rod classes

Feeder rods are divided into five classes:

extra heavy;
heavy;
medium;
light;
extra-light (picker).

Each class has its own specifics and purpose. Also, rods are distinguished by action - fast, slow and complex. The fast action is designed for catching large trophies; only the tip of the rod works to bend. A slow action feeder works with almost the entire form and is necessary where a sharp sweeping hook is required. The complex action is universal, its operation depends on the load: the larger the prey, the stronger the bend of the form.

An angler, based on his preferences and fishing needs, can choose a feeder “for himself”, focusing on its class.

Technical characteristics of feeder rods

Despite the fact that the principle of fishing with a feeder is the same for all feeder rods, each model differs in certain technical characteristics, namely:

form material;
formation;
dough;
handle material;
the number of quivertypes included in the delivery set;
the material of the passage rings and the presence of inserts;
length;
weight;
transport length;
reel seat.
number of knees

Length

The most popular feeder length is 11–13 feet or 3.3–3.9 meters. Since the first feeder rods were produced by the British, in the future their length is usually calculated in feet (30 cm), in increments of 1 foot. Therefore, a feeder with a length of 3.4 or 3.5 meters is rare (if such models are made at all), but the standard version is 3.0, 3.3, 3.6,3.9, 4.2 meters.

The length of the rod is important not only for the convenience of using the rod. A long feeder is more convenient for casting over long distances, but it is not suitable for fishing from a boat. The height of the fisherman also influences the choice of feeder length; this factor is important from the point of view of the comfort of landing fish and performing power casts.

When fishing in reservoirs with strong currents, fans of feeder fishing perform power casts with heavy feeders that can “hold the bottom.” In this case, a long rod is preferable, since it has more leverage, which means that when casting, less effort is applied to throw the desired distance.

Well, banal transportation conveniences are also taken into account when choosing the feeder length. Not all fishermen get to the reservoir by personal transport, and when transported on a bus or train, the extra centimeters cause a lot of inconvenience.

Experienced anglers have several options for feeder rods in their arsenal, varying in length to cover all kinds of fishing conditions. When fishing, there are often cases when seemingly insignificant details greatly affect the result, in particular, 20–30 “extra” meters in casting range provided by a long feeder.

Weight

Feeder rods are placed on stands and the angler does not seem to experience serious physical stress during the session due to the heavy blank. But the reality is that weight plays a big role, and not just from the point of view of the convenience of the fisherman who has to recast every 5-10 minutes.

The light feeder gives an indescribable feeling when playing both small and especially trophy fish. The beginner has the feeling that the form is about to break and the fish will fall off the hook. But due to the large number of rings, the strength and flexibility of the material, the fishing rod binds the fish well and absorbs its sharp jerks.

Carbon blanks are lighter than fiberglass blanks, and, of course, they are preferable. But the cost of carbon fiber rods is higher, so you have to choose - save money, or ensure your convenience at the expense of additional expenses.

The good news for anglers is that now even middle-class blanks are made of carbon fiber and their weight is minimal. There is no doubt that scientific and technological progress will contribute to the creation of innovative materials for rod blanks, and they will be light as feathers, but very durable.

Build

The structure of the feeder blank is an important characteristic and not everyone, especially a novice angler, understands the essence of the concept.

The feeder structure can be:

slow;
average (medium);
fast

Slow action is also called parabolic and such rods bend the entire length except for the handle. Slow action feeders do an excellent job with trophy fish, since when fishing, the load on the form is evenly distributed. All parts of the feeder are involved in the work and after a short resistance the fish gets tired and obediently goes into the landing net.

Fast action feeders are the toughest and most throwing ones. Under load, only the upper third of the form works, and the rest does not change its brand. Fast action rods allow you to make sharp strikes, which is necessary when catching small fish.

Medium action rods (parabolics) are recommended for beginner fishermen, as they forgive mistakes when fishing for a trophy, and have a certain rigidity that helps when casting. The bending of the form depends on the force applied, and if only the tip bends when biting small fish, then the trophy fish bends it all the way to the handle.

Important! To determine the structure of the feeder rod, you need to fix the end and gradually bend the blank. It is not difficult to determine by eye the degree of bending of the form in different parts.

Test

In the work bag of every feeder angler there are feeders of different sizes and weights and, naturally, the rod must cope with casting them. To make the task easier for anglers, the manufacturer indicates the blank test or the maximum weight of the load that is safe to work with.

We are not talking about the nominal weight of the feeder, but about the total weight of the load thrown into the reservoir, that is, the feeder with bait. You have to fish in different conditions, with feeders of a wide range of weights, on fast-flowing rivers and on stagnant bodies of water.

There is simply no universal form for all conditions, so each feeder selects rods for certain bodies of water and specific fishing conditions.

The feeder's form indicates its test, and the choice is not difficult to make, but it is important to understand that if a test of 80 grams is indicated, this does not mean that the rod will break when trying to cast a feeder weighing 120 grams. Overloading the feeder, as well as underloading, is undesirable, unless, of course, you want fishing to be comfortable.

Feeder class

The test characteristics of the feeder are directly related to its class. Let’s say right away that the division into classes is quite arbitrary, but, nevertheless, this is also one of the important indicators that are taken into account when choosing a fishing rod.

There are 4 classes of feeders:

Light (light).
Medium (medium).
Heavy (heavy).
Extra-heavy (extra-heavy).

Light class rods have a load of up to 40 grams and are used for catching small fish at close range. A rural pond, or a small forest lake, or a paid domestic pond - these are the conditions in which a light class feeder is most in demand. They are not thrown over long distances and are not used to catch trophy carp and grass carp.

Rod class	Designation (English/Russian)	Load test (gr.)	Line test (mm/kg)
Light (Picker)	L (light)/Light	10-40	0,10-0,26/ 1-4
Average	M (Medium)	40-80	0,2-0,25/4,4-5,2
Heavy	H (Heavy)/Heavy	80-120	0,28-0,3/5,5-6
Super heavy	EH (Extra-heavy)/Extra Heavy	more than 120	0,3-0,32/6-6,7

No, of course, if a trophy is attached to a hook, then with the proper skill and experience it can be brought out on such a rod, but it’s still better not to take risks.

For medium class feeders, the limit is eighty grams and their scope of application is much wider. There is already a river with a measured flow and any bodies of water with standing water.

Beginning fans of feeder fishing should first of all pay attention to such forms.

A heavy-class feeder fishing rod is used for fishing on rivers with strong currents and medium distances. The limit value is 120 grams, the optimal weight of the feeder is 90 grams. Trophy carp and grass carp are also caught using a heavy feeder.

The test of extra-heavy feeders exceeds 120 grams and they are used for long-distance fishing in reservoirs with strong currents. In such conditions, heavy feeders are needed and the power of the blank and extra-heavy feeder copes with such tasks perfectly.

The division of feeder rods into classes was done in order to simplify the task of choosing for novice anglers who are still unfamiliar with all the intricacies.

Hooks, leashes and line for feeder

Main line

For feeder tackle, both regular mono fishing line and braided fishing line are used. For short distances, the most suitable would be a monofilament, which has a certain stretchability and will slightly smooth out the jerks of the fish. At short distances, the stretchability of monofilament fishing line has virtually no negative impact on hooking and the visibility of bites.

My recommended diameter is 0.16-0.2 mm for small fish and 0.2-0.25 mm for fish larger than a kilogram. I do not recommend using feeder tackle to catch trophy fish. For this (my personal opinion), a regular donka using a spinning rod is more suitable. This opinion appeared after purposefully catching bream and carp, which, when biting, bend the poor spinning rod (placed vertically) almost into a “donut”.

For long-distance fishing, mono fishing line will not be enough. For this you need braided line, namely the quality of braided fishing line, such as zero elongation. This is necessary to transmit the bite impulse to the tip. When using braid, be careful in the last phase of fishing, when the fish are already near the shore. This is when the likelihood of the leash breaking is highest. My recommended diameters of braided fishing line for the feeder are 0.1-0.16 mm.

One way to avoid the leash breaking is to install a feeder rubber insert in front of it. It will perfectly absorb the jerks of the fish and make it possible to use thinner leashes for fishing.

I’ll say a few more words about the reason for using thin lines for the “base”. Firstly, the thicker the line, the worse the casting of the equipment. Secondly, during the current there is less resistance to the flow of water, and accordingly there is less arc from the fishing line. This has a positive effect on the transmission of the bite to the tip and reduces the drift of the equipment downstream. And the last thing is aesthetics and the pleasure of fishing. It is always more pleasant to fish with more sensitive and thin gear.

Line for leashes

This is where you shouldn't save money. Take the highest quality fishing line that is thin and invisible in the water. If you take mono, then match its color with the color of the bottom. The most suitable leader material is fluorocarbon. Although it is a little expensive, there are small unwindings of 20-50 meters. Fluorocarbon fishing line has the characteristics we need, such as almost complete invisibility and increased strength.

Feeder hooks

Since this is, after all, more of a sporting tackle, in 90% of cases small hooks are used for feeder fishing, with rare exceptions (when fishing for carp, for example) - a little larger.

Choosing a spinning rod for long casting

Spinning for long casting is a category of fishing rods designed for fishing at a considerable distance from the angler. It is designed for making throws over impressive distances, with the goal of getting to a promising point or area in which predatory fish are hunting.

The need for long-casting rods arises when you have to fish areas remote from the shore. These can be various channel bottom irregularities, single submerged tree trunks, extended grooves or local pits and tubercles.

The scope of application of spinning rods for long-distance casting is not too wide. In fact, these fishing rods can be called specialized, which are used in individual cases when the situation requires it:

Asp fishing, when the predator feeds at a decent distance from the fisherman and does not let him get close. This is a classic case when hunting for this predator. Therefore, special long-range spinners that work under the surface and corresponding sending fishing rods under them have been developed long ago.
Bank jig on medium and large rivers. On such reservoirs, there is often a need to make long casts, since it is there that the most promising points where a large predator stands are located.
Salmon fishing on fast northern rivers and large lakes. In this case, the ability to make long throws of spinners or spinners is also often required.

In all other situations, the casting range is not critical, and many predators can be successfully caught in the coastal zone or in small bodies of water using wobblers, small silicone and other types of universal baits.

Features of spinning rods for long casting

As the name and purpose of the spinning rods suggest, they contain the appropriate characteristics that allow you to perform ultra-long casts. Of course, the main indicator of such a fishing rod is its length. Short rods will not allow you to make long throws due to their short swing and low inertia. The same cannot be said about “tall” sticks.

A fishing rod can be considered long-range if its length is 2.70 meters and above. Most of these rods can easily send bait over a distance of about 70–80 meters. For ultra-long casts, it’s still optimal to stick with spinning rods of 3.05, or even all 3.30 meters.

The structure of the spinning rod is also important. Slow or parabolic is considered optimal for long casting. With such a fishing rod it is easy to cast in a forceful manner, sending the bait over impressive distances.

Parabolic rods are suitable for catching salmon or asp, when the lure is cast evenly and there is constant continuous contact with it. If you plan to jig fishing, and even over long distances, then a slow fishing rod will not work.

Ideally, for shore jigging at long distances, you need to use fast spinning rods. It is these rods that provide maximum sensitivity for fixing bites and the necessary rigidity for confident hooking. However, rare models with such a structure have good sending power.

The way out in this situation is to choose fishing rods with medium-fast action, which have good “feel” and rigidity and allow long-distance casting of compact jig baits.

During flight, the fishing line experiences friction against the rings, which undoubtedly affects the casting distance of the bait. Their quality, placement and size determine how sending the chosen spinning rod will be. Therefore, this parameter should also be given special attention when choosing a fishing rod.

Long casting technique

Learning to make long casts is not easy. Beginners do not immediately manage to establish the correct technique. It’s good if you have the opportunity to watch experienced fishermen, especially gherlings. After all, everything is important in this matter: the scope, the hang of the bait, and the position of the fishing rod during the flight of the spoon.

So, having well-chosen gear for long-distance casting and a set of compact heavy baits, you can begin to master the technique of casting:

The cast must be performed in a forceful manner, giving the rod acceleration towards the final phase of the swing.

We hold the rod with both hands. The lower hand should be located at the very end of the handle, the upper one should be located in the area of the spinning reel.
The overhang of the fishing line with the bait should be at least half the length of the spinning rod, preferably a little more.
When casting, the bait should be sent at approximately 45 degrees to the horizontal.
Until the spinner splashes down, hold the rod so that it forms a straight line with the fishing line.

Beginner fishermen often have some fear for the safety of their fishing rod. They do not use its full potential. The casting range of the spinning rod suffers.

There is no need to be afraid of performing power casts, because the spinning rod has a good margin of safety and allows such a throwing technique. The main thing is not to exceed its real upper limit and not to put too heavy a bait.

Rating of spinning rods for long casting

Today there are not many long-range fishing rods. However, every serious manufacturer of fishing tackle will definitely have several models in their assortment designed for fishing at ultra-long distances from the shore. Below are the top 5 spinning rods for long-distance casting.

Norstream Kando 962H

This model is the longest-range in the “Norstream Kando” line of spinning rods and is called “Power Master”. With the correct long-casting technique, this fishing rod can send the bait 100 meters away. Due to its sensitivity and decent rigidity, it is used in shore jigs. Allows you to record bites and perform high-quality hooking at a considerable distance from the angler.

The length of the Kando 962H spinning rod is 2.89 meters. The test range is wide. The fishing rod can cast baits weighing from 12 to 45 grams. There is a certain margin of safety that allows, if necessary, to exceed the upper limit. But in this case, the casting range begins to decrease.

St. Croix Avid IPC 106MF2

A well-known long-range model that allows you to easily send a spinner 100 meters or more. Many anglers use spinning rods in jigs when fishing from the shore. It is often found in the arsenal of foal fishermen, who also need long-distance casting.

The length of the “106MF2” model is 3.20 meters. The test for baits is 7–21 grams, but traditionally for fishing rods from this manufacturer the upper limit can be exceeded by two or even more times. The spinning rod calmly throws spinners weighing over 40 grams in a forceful manner over a decent distance.

Banax TinFish 100MHF2

Mid-budget spinning rod, specially designed for heavy jigging and long-distance fishing from the shore on large rivers and lakes. It has excellent sensitivity and rigidity, so it allows you to register any contact of a predator with the bait and make confident hooks. Also used in asp fishing.

The length of the “100MHF2” model is 3.05 meters. Test range 10–42 grams. Exceeding the upper limit is allowed. Build quickly. The spinning rod is endowed with an impressive reserve of strength and power.

Daiko Absolute 1002MHXF

Long-range fishing rod from the expensive price segment. This is a professional fishing rod designed for ultra-long casts. It is distinguished by its versatility, as it is equally well suited for coastal jigging, asp fishing and salmon hunting. With its help you can fish with a wide variety of baits, using any animation techniques.

The “1002MHXF” model has an ultra-fast action, but when casting it works with the entire blank. Its length is 3.05 meters, and the bait test is 10.5–42 grams. It has a good margin of safety and allows you to slightly exceed the upper limit.

Norstream NorWay 100H

This model is claimed to be a universal long-range model designed for hunting large fish. It is designed for large oscillating spoons, bulky stubborn spinners and heavy jig baits. Allows you to hunt for salmon, pike, catfish and pike perch. It has an excellent feel, hooks fish well and has decent power, designed to fight trophy specimens.

The NorWay 100H spinning rod has a length of 3.05 meters. Its test is 15–50 grams. Exceeding the upper limit is allowed. The action is medium-fast, designed for different types of baits and long-distance casting.

rybalkanasha.ru

Build a feeder rod. What should a beginner choose: fast action or parabolic?

Everything said below is solely the result of personal experience and personal feelings, and therefore is purely subjective.
At one time, when I was switching from a “rapier” to a feeder, I asked myself the question - which rod should I buy? I re-read all the available sources and recommendations on this issue, thanks to which I decided what I needed in terms of price, quantity, length, test and quality. However, nowhere have I found a substantiated, objective opinion regarding the rod’s construction. They are nowhere to be found now.

It so happened that from the very beginning I had a pair of rods (I don’t name the manufacturers, so as not to engage in advertising and anti-advertising) of comparable price, the same length (390cm), test (40-150g) and quality, but one is parabolic, and the other is fast build.

True, the latter was a little harder. (By the way, other things being equal, a fast rod will always be somewhat heavier due to its design features). Taking both feeders and a set of feeders of different weights, I went out to the school stadium. And this is what happened.

Feeders from 40 to 120g were thrown. The same feeder was cast with each rod 5 times. The maximum casting distance for feeders of the same weight with both rods turned out to be approximately the same. At the same time, lighter feeders with a parabolic rod were cast, on average, a little further (up to 5 m) than with a fast rod; and heavier ones - vice versa.
Limiting the maximum casting distance to 15 m with a rubber band (using a leash made of 0.25 mm fishing line for reinsurance under a feeder weighing 120 g) showed that the dynamic shock when the clip is activated is stronger for a fast rod than for a parabolic rod. At the same time, out of 5 casts with a fast rod, the feeder was shot twice. That is, the dynamic impact of the parabolic is better absorbed.
It felt like the parabolic had better balance than the fast feeder. However, it is possible that this is only a drawback of the rod that I had or is due to the casting style.
In general, on an intuitive level, the impression was created that the parabolic was a “live” rod, while the fast one seemed just a stick. Perhaps these are echoes of considerable experience working with float rods.

The operation of the parabolic when casting can be seen below:

{youtube}wZ4sNYDmCB4{/youtube} To this we can add the well-known – a fast rod, unlike a parabolic rod, allows you to “lift” a trophy specimen if necessary; and a parabolic rod, unlike a fast rod, forgives mistakes when fishing the same specimen. Many sources claim that a fast rod works better in fast currents. Maybe. But having been on the Desna several times (hardly anyone would say that the current is slow there), I didn’t notice much of a difference. Maybe we are talking about mountain rivers.

Later, during fishing trips, I came to the conclusion that the advantages of a fast feeder are fully manifested only when catching powerful fish. Let's say, trophy carp or catfish. Or sea fish. Most likely, this is what they were created for. In other cases, it is at least no better than parabolic, and possibly worse. I came to these conclusions because I had the opportunity to compare both rods from the very beginning of my introduction to the feeder. At the same time, one of my comrades started with a fast-action rod, got used to it and contemptuously calls parabolics “hoses.”

As we see, there is no clear answer to the question “which is better?” No. The truth, as always, is somewhere in the middle. But, based on the above, I would not advise a beginner to purchase fast-action rods, unless he is going to engage in extreme fishing. Perhaps a more universal option is semi-parabolics, but I have no experience with them and cannot say anything. I will be very glad if these considerations help someone.

Valery FEDOROV.

See useful articles:

Which feeder to choose? Video about choosing the first feeder - simple and clear about the optimal choice

How to choose the feeder length and increase the efficiency of complementary feeding? — what is the optimal rod length and how does feeding accuracy depend on it?

Choosing a feeder and reel - selecting gear for fishing in the current

Choosing a feeder rod for beginners - what parameters of the feeder to pay attention to first of all