Exciting fishing with a running donkey

Information

Characteristics

It is better to fish with a running donkey where a float wire rod will not help. This tackle can be used at any depth, in fast currents and on uneven bottoms. It is clear that in this way they catch fish that float on the current. It’s good to fish from a boat, but some, having chosen a convenient place, cast gear from the shore.

Half-bottom or catching by knock

In early spring, catching a catch with a float rod is not easy, due to factors such as strong currents and water pollution with debris. And yet, during this period, the fish are close to the shore, which negates the need to use bottom fishing rods; in addition, they are not so efficient. Basically, spring fishing is characterized by good catches; fish such as ide, perch, roach and bream are good for biting. The best option when fishing in high water is half-bottom fishing or “knock” fishing. For these purposes, there are two main types of fishing rod layout. If the distance from the shore is small and the current is not strong, then you can use a standard float rod. The float can move up about half a meter from the tip of the rod, so instead of two sinkers, one is used, usually sliding. This arrangement is not much different from a standard bottom, the only thing is that the sinker should be lighter and the line thinner.

When catching, a main line with a diameter of 0.3 mm is used, and leads no thicker than 0.17 mm. The weight of the sinker should not exceed the values ​​​​revealed during the rod test. For a branded rod, the test is indicated on the butt. Using simple fishing rods, you can only rely on your skill.

If the sinker is too heavy, it can break the fishing rod, and if it is too light, then the catch may not take place at great depths or in the case of a fast river flow. The optimal weight can be determined through several tests. To do this, it is desirable that the sinker has a fastener, which will help you quickly change the sinker of one weight to another. With this arrangement, the length of the working line should be slightly longer than the length of the rod, due to the fact that the float in the upper part limits the reeling.

If you need a longer line, then the float is removed, and the bite can be determined by the tip of the rod. This design is in many ways similar to the English bottom fishing rod (quivertip), only a simplified variation. The quivertip is completely suitable for bottom fishing, designed for a wide range of used loads, and for the use of feeders of different shapes and sizes. Its design makes it possible to fish at any current speed and at different depths. Even standard spinning and wire rods remain effective when fishing “by knock” and give a good catch. In spring, the main bait is considered to be an earthworm, which fish love very much.

This is interesting: Chod-rig equipment

Rules for choosing gear

The unifying factor for all donks is the possibility of catching fish feeding in the bottom layer and from the bottom of the reservoir. But this does not mean that all donks are the same and that gear for the current also differs from each other.

The use of one or another equipment depends on:

• fishing conditions;
• season;
• distance to point;
• availability of watercraft.

There are also universal bottom tackles and, for example, they can fish with a feeder both from the shore and from a boat, both in summer and winter. But in each case, the advantages and disadvantages of the equipment manifest themselves, and in summer or autumn it is more convenient to fish from the shore to the feeder. But you can’t fish from the shore with a winter bottom, so when choosing equipment, all factors are taken into account.

It is easier to knit primitive hooks or nipples, but the fishing efficiency with such equipment is much lower, so you need to choose what is more important. Fishing with a boat is more convenient, because you can choose any place on the reservoir, but you need to use bottom gear with rods.

Rod selection

I don’t think that the running rod deserves the purchase of a separate spinning kit. Unless, of course, you are in the mood to participate in competitions, where success depends on what you fish with . Therefore, for the average fishing enthusiast, an ordinary stick is quite suitable - aluminum or carbon, it doesn’t matter. The main thing is that it meets certain criteria.

I won’t hide the fact that we won’t take spinning rods for twitching and jigging for this type of fishing. The love for these rods is limitless and we cherish and care for them. But in stock there is an old fishing rod, from which the passion for spinning fishing once began.

Why a spinning rod and not a fishing rod? The fishing rod is less versatile in use. Feeder connoisseurs may disagree, but excuse me - this is purely my opinion.

In my understanding, the spinning rod for a running donkey should be:

• Fast.
• Not less than 240 centimeters, but not more than 270 in length.
• Capable of handling loads up to 50 grams.
• The presence of a spinning reel. It’s easier for even a beginner to handle.

With such characteristics of the stick, it is possible to catch fairly large and strong fish at a sufficient distance from the shore.

Main advantages of the method

Significant differences between the running option both from the usual donkey and from the feeder method of fishing provide this method with the following advantages:

• The ability to fish effectively in strong current conditions, which may not be possible with even the heaviest commercially available feeders.
• More active play of the bait, which is simultaneously influenced by both the retrieve performed by the angler and the current, which revives the bait, making it much more attractive to the predator.
• The method is well suited for determining where fish stay in unfamiliar bodies of water. After the location of the school has been determined, if desired and the current is not too strong, you can proceed to feeder fishing.
• The presence of several hooks allows you to quickly determine the most suitable bait or attachment in a particular situation.
• With a suitable sinker shape, the equipment turns out to be more resistant to snags than feeder rigs - a weight like a Tyrolean stick slips out of those places where the feeders get stuck.
• It is much easier for an angler to change the place of fishing than with feeder fishing. Often, fishing with a running donkey becomes exploration of an unfamiliar area for promising fishing spots and concentrations of fish.

Donks with feeders

3

When catching white fish using bottom gear, you need to use bait. To deliver complementary foods, feeders of any type and size are used, depending on the characteristics of the place (current, depth, etc.). Any feeder is a reservoir for storing bait with holes for slowly washing it out. The feeder can be used instead of a weight or used together with lead weights.

Spiral feeder with central sinker

The most used feeders are a spiral of steel wire with a diameter of 3 mm. When making a spiral used in areas with strong currents, one part of the spiral is filled with lead. As a rule, the feeder is attached to a fishing line, one leash is placed below the feeder, and the other above. To fill the spiral feeder, complementary foods are mixed with clay. Feeders made from a piece of aluminum tube with a diameter of 20-40 mm with drilled holes with a diameter of up to 4 mm are often used. The tube is closed at both ends with rubber plugs with holes for passing the fishing line. This design is called a “racket”.

Feeder “torpedo” (“racket”) 1-limiter; 2 rubber plugs with holes; 3-duralumin tube with holes; 4-leashes.

The equipped “racket” has a normal weight for fixing it on the bottom in a quiet current. In the case of a strong current, lead is placed inside the feeder or a pair of lead rings are fixed outside. The advantages of such a feeder are the large volume and low degree of feed leaching. Basically, feeders are filled with porridge and bran.

SOURCE

How to fish with a donka with a feeder?

In order for your fishing to be effective, you should know some fishing rules:

choose the area for fishing wisely; Make about twenty test casts so that the feeder reaches the surface of the bottom of the reservoir. Then make a powerful hook to release the remaining bait from the structure.

This is especially important in bodies of water characterized by strong currents; at the moment the structure touches water, the bait should not fall out of it; In order to organize the casting of the equipment to the same place, it is necessary to insert the monofilament into the clip near the reel for the first time. Take the tackle out of the water and fill it with food again, and then cast along the guideline

Only after this can the tackle with the hook hit the same point; You should not equip the tip of the rod with a bell. This can not only get on the nerves of nearby fishermen, but also scare away the fish. You will see when it bites; if after five minutes there are no bites, it is recommended to check the tackle and fill it with new bait; after the final assembly of the gear, it is worth doing a small test. Pay special attention to the free sliding of the monofilament through the rings; When mounting the rod on the stand, it is important to avoid pressing the monofilament thread. Otherwise you won't be able to see the bites.

Options for a donkey with a feeder

If you lack excitement in life, then extreme fishing in reservoirs with strong currents will be to your liking. In this case, the most suitable equipment would be a feeder with a donk and a feeder. It can be used at great depths, in strong currents and when hunting for trophy predators.

The following models are distinguished:

• feeder trap;
• cylindrical;
• cone shape;
• and with a flat lid.

The area for fishing in the coastal zone is chosen away from vegetation. At the beginning of fishing, it is recommended to cast as often as possible to ensure the required amount of complementary food.

If desired, and naturally possible, you can add complementary foods by hand. It’s better to throw feeders in one place, at least try

Well, what is very important is not to miss the bite. After all, your catch will depend on this.

Feeders for various fishing conditions

1. If you decide to fish in backwaters where there is a light current, then in this case the so-called trap feeder is ideal for you. If it is necessary to ensure instant dispersion of the bait along the bottom of the reservoir and create a whole cloud of complementary food, then use a feeder trap. A trap with a short leash and light weight will be optimally suitable. The bait itself should be loose and not stick tightly to the structure. But a very sticky base won't work either. It is necessary to find a “golden mean” so that it is evenly distributed along the coast. You can purchase such a mixture in specialized stores, but creating it yourself is also easy.
2. For stormy river fishing, feeders with a flat lid are perfect.
3. In fast currents when hunting for roach, bream and chub, give your preference to a design with a large mass (about 60 g) and a lid in the shape of a flat rectangle. Only in this case can a gradual and uniform spraying of the bait be ensured.
4. For river spaces characterized by low currents, cylindrical-shaped feeders are suitable. Some models are additionally equipped with special systems for bait control. This will allow you to add complementary food to the structure without even removing it from the water.
5. For fishing in deep water bodies, for example, on lakes, take cone-shaped models. This is an ideal option for catching a trophy predator, which is very active in the pond and swims quickly. For such an instance to stop, something truly special must be provided.
6. A special ball is placed in the middle of the structure, which is completely filled with worms and a small amount of porridge. This model must be securely fastened to a monofilament thread in order to easily hook a predator in the future.

Reels you can use

A walking donkey is one of those fishing methods that is as undemanding as possible when it comes to the reels used. This could be a non-inertial reel taken from a spinning rod with a standard size from 2000 to 4000, or maybe an ancient inertial reel made 40 years ago. However, inertia-free fishing is still preferable, especially for anglers with little experience. Such coils are easy to use and rarely form “beards”.

Gasoline reels are the best choice for equipping a running bottom

If available, you can use at least multiplier ones, together with a spinning rod. Such rods are usually designed for the use of large baits, the test reaches 40 grams or more, and the fast action ensures good sensitivity.

This is interesting: Boat fishing

Advantages of the fishing method

Fishing with a running donkey has its own characteristic features, which are best manifested in conditions of spring water level rise:

Donk fishing rod

• Suitable for strong currents. There are situations when even 150-gram feeders do not hold the bottom. A correctly shaped sinker copes with this task better.
• Allows you to quickly explore unfamiliar areas and determine where fish accumulate.
• This is a universal tackle. Suitable for both peaceful and predatory fish - you just need to choose the right bait.
• Fishing with a running donka does not require expensive specialized rods or reels.

Fishing with a running donka from the shore

You need to fish from the shore in the following way: you need to throw a heavy sinker with bait into a fast current, so that when it falls to the bottom, the sinker stretches the line so that it is perpendicular to the shore. In principle, fishing is the same as from a boat. You should tug the line from time to time while lifting the sinker so that the current carries your equipment a distance. If after several trips there are no bites, then it is better to change the fishing location, and upstream.

A couple more tips for donk lovers, here!

By the way, you can fish using the principle of a running donkey even in winter, through a hole. Yes, yes, there is a “slide” through the hole to the donk, read here.

Fishing with a running donkey from a boat at anchor

Take the tackle with an inertial reel, with a rigid spinning rod, you need to use a fishing line depending on what kind of fish you are going to catch, a leash of 0.2-0.3, a sinker is also selected at your discretion. The sinker should be lowered to the bottom, and then gradually lifted along with the bait on the hook, the current carries it away from the boat. Thus, periodically raising the sinker, you can move the nozzle 15-20 meters from the boat. If you are going fishing in a body of water that is unfamiliar to you, take with you all the different sinkers to choose the one you need at that moment; for such gear, take medium-sized single hooks, with the leash length being about 1 meter. To prevent your leashes from getting tangled in the main line, the leashes should be attached using swivels. If you use two leashes at once, then take a better sliding sinker. Success primarily depends on how you lead the bait.

Having chosen a place for fishing, anchor (read which anchor to choose for your boat here), decide on the depth, check the strength of the current, select the necessary sinker. Take the rod in your hands near the reel so that the rings are directed to the left and down, while holding the drum with your thumb, then lower the sinker to the bottom, keeping the rod parallel to the water. When the sinker reaches the bottom, carefully raise the end of the rod at an angle of 30-40 degrees, and only after that lower the reel of the reel, while continuing to lift the rod to the top. Then the reel will slow down and thereby slowly lower the rod to its original position. This technique must be repeated to allow the sinker to swim several meters, while the speed increases due to drifts. The speed should be kept in the area where you are confident that the fish will bite. You will feel the bite by pushing or a slight pull. You should react and hook the fish immediately, since you cannot know for sure how successfully the fish took the bait. When biting with the rod raised up, you should hook to the right and back.

Baits used

Not all baits are suitable for this method of fishing. Too soft options, such as, for example, semolina or bread, will quickly fly off the hook even if fishing takes place in still water. In this regard, the following baits and attachments are mainly used:

• red dung worm;
• maggot;
• live bait;
• pasta;
• pearl barley.

Important! To prevent the red dung worm from slipping off the hook, it can be secured with maggots. Among other things, such a “sandwich” often works better than maggots or worms individually.

But bait is usually not used. After all, the equipment does not remain in one place, and the current is not conducive to the use of bait mixtures - anyway, in such conditions they are ineffective, since the food is either washed away by the current, or the hooks with bait leave the feeding point during the retrieve.

Features of the equipment used, bait used

Correctly tied equipment is the key to successful fishing and avoidance of tangling of leashes. In the case of a running donkey, the variety of equipment is quite large. Sinkers are usually used flat, with additional lugs. In calmer areas, feeder feeders are also quite suitable.

The material of the leashes and their thickness depend on the main object of fishing. For peaceful and relatively small fish - 0.1–0.12 mm; if it is assumed that the catch may contain bream of decent size, then it is better not to set it less than 0.16 mm. Naturally, when hunting pike with such gear, you need to use either thick fluorocarbon or metal.

The sizes of hooks must be selected based on the size of the fish, as well as the characteristics of the bait used.

Important! You can prevent tangling of the equipment by selecting the correct length of the leashes and the distance between them. If the distance between the leashes is slightly greater than the sum of their lengths, then they will not be able to get tangled.

It is also worth considering that gear with triple swivels gets tangled less.

The bait should be selected from those that stick well to the hook. There is no point in using bread, semolina and similar things here. But a red dung worm, maggot or bloodworm is another matter. In the case of running donka, you should give preference to them, since their active movement, in addition to the smell, attracts even not very active fish.

Equipment Features

The equipment of the chassis itself is quite simple. The tackle consists of a sinker and several leashes with hooks. To make the leashes less tangled, they are attached to the main line using swivels, or anti-twist tubes are used. The load may be positioned differently. Most often, it is simply tied to the end of the main line, but there are options for attaching the sinker to a separate leash, or tying it in front of the leashes. Each of the designs has its own advantages and disadvantages.

Important! The passability of the equipment can be increased if you use not an ordinary sinker, but, for example, a Tyrolean stick.

As a leader material, a slightly thinner fishing line is generally used than the main one. Fluorocarbon is occasionally used, and in places where there are a lot of pike (especially if there is live bait on the hook instead of a worm), steel wire leashes can also be used.

The main line is often set quite thick, from 0.3 to 0.4 millimeters, since in such a case the current will put more pressure on the equipment and will have a positive effect on the performance of the bait. Also, the large diameter allows you to pull out the tackle when snagged, and also provides the ability to fight large fish.

Sinkers are used in pear-shaped, flat, or so-called Tyrolean sticks - this way, maximum maneuverability on a rocky or snagged bottom is achieved. On reservoirs with weak or no current, you can also use a spring weight filled with viscous bait.

Photo 3. Flat sinker of suitable weight.

Method of equipping the chassis

There are several ways to rig a donkey. The most popular of them is the classic one.

Read more

How to catch pike perch on a donka?

The assembly diagram of the running bottom consists of a sinker with a through hole, limiters and a leash with hooks.

The main thing in this process is to choose the “right” sinker. You need to focus on the weight and shape of the element. These parameters directly depend on factors such as water depth, current speed, and angler preferences.

Fishing with this gear differs from feeder fishing mainly in the rods used and tactics.

The tasks of the sinker should be:

• reliable fixation of the bait;
• maneuverability;
• versatility (it should not cling to grass, stones and other elements).

It is recommended to give preference to products made from lead.

For effective fishing, choose a conical or cylindrical sinker; the “spoon” shape is also popular. The product is not fixed to allow it to slide (it is enough to just put stops on both sides). You should pay attention to the thickness of the fishing line. This parameter depends on the size of the expected fish caught.

Leashes with hooks are located above and below the sinker.

Donks with installed anti-twisters, the shape of which can be varied, are becoming quite popular. The purpose of the design is to use a special tube that prevents the line from getting tangled and the leashes from getting tangled.

Varieties of donks for currents

The following are considered catching gear for the current:

• classic donka with a rod and spring;
• casting without a rod;
• running donka;
• carousel;
• "crucian carp killer";
• donka for fishing from a boat with a ring;
• feeder tackle (including method);
• makushatniks;
• donks on a predator;
• "nipples".

The main difficulty when fishing on the current is to choose the right sinker. You should not use a load that is too heavy, but it should not be carried away by the current either. The weight of the load should be such that the tackle lies on the bottom in a calm state, but upon contact with the fish it immediately transmits information about this to the fisherman. A cautious fish, having picked up and pulled a leash with a heavy load, will immediately become wary, drop the bait, and no hooking will occur.

Requirements for bottom gear

The main requirements for any bottom current equipment:

• sensitivity;
• functionality;
• compactness;
• reliability.

Strong river fish breaks off incorrectly tied and unreliable equipment, and the fisherman is left without a trophy. Therefore, each element of the donkey must be functional and durable. This applies to fishing lines, hooks and rods, and all components are responsible for their functions.

It is not necessary to purchase the most expensive gear, but its reliability must correspond to the assigned tasks. Another advantage of fishing with donks in the current is that the fisherman can only guess how big the fish he will catch will be.

When fishing for crucian carp or bream, carp and even catfish are caught on the hook, and this fish is much larger and more powerful. Therefore, it is important to be ready for the trophy, and this depends on the reliability of the gear.

The interchangeability of elements in the equipment is also important, because fishing conditions vary, and sometimes you have to change weights or leashes due to cliffs or weather conditions. If the bite is good, you don’t want to waste time on such things, and it’s better to take a supply of rigs with you.

Requirements for the rod

There are no too high requirements for the forms used for running donks. Typically, anglers use something that is already available, and do not select rods specifically for this method. Often, for this method of fishing, spinning rods with a suitable test are used - up to 50-60 grams and up to 2.4 meters long. Too much length can make it difficult to maneuver the tackle, and also reduce tactile sensitivity, because bites here are recognized in the same way as in spinning fishing - mainly by a blow or pull, which is transmitted to the angler’s hand.

Photo 1. Budget feeder as a running donkey.

Sufficiently powerful picker rods are also suitable. With a length of 2.7 meters, the picker with the most rigid tip installed can also be used as a running bottom. The sensitivity of such forms is quite sufficient for this method of fishing. The presence of such a fishing rod allows you, if desired, to switch to classic feeder fishing (which is sometimes done when a concentration of fish is detected).

Photo 2. It is important to choose the best tip.

Often the simplest and most inexpensive gear, such as Chinese telescopic spinning rods, is used. These rods are compact, however, both sensitivity and reliability leave much to be desired. Therefore, most anglers prefer budget graphite spinning rods with a plug design.

Tackle without rods for current

There are current donks that do not have a rod in their design, these include:

• "rubber bands";
• snacks;
• carousels.

The advantages of such donks are their compactness, because they are more convenient to transport and store due to their small size. The reels on which such donks are wound have a design that allows them to be secured to the shore and held firmly.

When a river fish bites strongly, there is a chance that the tackle will be pulled into the water, so you need to secure it well and monitor the condition of the reel. They fish with donkeys without rods from the shore; it is more convenient both for casting and controlling the tackle, and for fishing.

Inertia-free reels, which are required for a feeder, are not needed on a cast or elastic band; this simplifies the design of the tackle, but complicates pulling the fish to the shore.

Rubber

The design of the elastic band throw for the current has a rubber shock absorber, thanks to which you don’t have to throw the tackle all the time, it goes into the water itself, and in the right place.

The disadvantage of fishing with a bottom rubber band in the current is that the shock absorber is stretched under water pressure and it is difficult to achieve good accuracy. An elastic band is more of a tackle for still waters, although there are many anglers who use it on rivers with a current.

Carousel

The tackle is similar to an elastic band in that it is equipped with 5–10 leashes with hooks, there is no fishing rod, the load is carried on a boat and the equipment is pulled into the water. Let's imagine a double-tied fishing line stretched into the eye of a weight located at the bottom of a reservoir.

When one of the parts is pulled, the other, to which the leashes are attached, also moves and goes into the water. After this, the fishing line is fixed on the reel, the alarm is set and all you have to do is wait for the bite. After the alarm goes off, all you have to do is pull the fishing line with hooks, and it will go to the shore, pulling the other end into the water.

After the angler removes the caught fish and re-hooks, the process is repeated. The donka carousel is more convenient for the current than an elastic band, because it does not stretch out in the water, but it is difficult to catch trophy fish with it due to the roughness of the equipment.

Mushrooms and nipples

Similar multi-hook rigs are used both in still waters and in currents and show good results. True, you will have to be patient and wait for a bite, because the principle of operation of the gear is based on the fact that the bait or a cube of macaque is washed away and attracts fish.

Having come to feed, the fish are hooked with one or more hooks on which foam is mounted, providing good buoyancy. The fluff takes a long time to wash away, and bait in the nipple is not much faster, although when fishing in the current this process is, for obvious reasons, accelerated.

But trophy fish are caught both on tops and nipples, which are not afraid of noise on the shore or rough elements of equipment. So such gear is used for fishing in the current, with or without a rod and reel, on hooks.

Equipment

The rod is mounted with a reel and a supply of main fishing line. A triple swivel is attached to the fishing line, and two leashes are attached through the winding rings. The length of one leash is up to 1 m, and the other – up to 50 cm. This design allows the fisherman to use two types of bait at the same time, but the disadvantage is the difficulty of casting. The sliding sinker is located on the main line or undergrowth.

The undergrowth is usually 30-50 cm long from a piece of fishing line 0.3-0.35 mm, at the ends of which there are loops. The main fishing line is attached to the topmost loop of the leader through a secure fastener. In this case, the leader is easily removable; you can keep a supply ready and quickly change them during active fishing. Sometimes an end leash (10-12 cm) from a piece of 0.2 mm fishing line is attached to the bottom loop, but most often they fish without it - a pair of working leashes are attached to a wire outlet.

Feeders are often used in the equipment of the undercarriage.

With a running donkey

Photo by Anatoly Mailkov

I believe that mastering the technique of successfully catching large fish with a running bottom should begin in the spring, when this tackle is most effective in muddy water.

In rivers, anglers fish both with wires and with bottom fishing rods of various designs. Each of the listed fishing methods has its own advantages and disadvantages, and the running donka is like “two in one”.

Fish usually grab a moving bait much more boldly, which explains the greater catchability of fishing with a wire compared to a stationary bottom, but in different parts of the river the depths, flow speed, bottom topography, and water temperature are constantly changing. This chain of features in each river changes over one or another segment of distance and the fisherman must take these factors into account. The fishing process is that the bait or baits are thrown into a certain place, and if there is no bite, then the fisherman begins to manipulate the tackle so that the current carries the bait to a new place, but with pauses until a bite follows . The required speed of movement of the equipment is achieved by selecting the load. By raising and lowering the sinker after pauses, the angler ensures that the bait moves, as during classic fishing with a wire rod. This method is especially effective when catching large bottom fish, and success is achieved with the right equipment, wiring technique and a set of baits. Despite its high performance and sports passion, fishing with a running donkey is still not very common among anglers.

Classic tackle for fishing with a running bottom consists of a rigid rod about 3 m long and replaceable elastic tips, which act as a bite indicator. The elastic element allows the fisherman to select the best option for a given section of the river, bait and intended catch. A fishing rod with a reel and a supply of main line with a diameter of 0.25 mm up to 100 m. The increased diameter of the line allows for better control of the tackle due to a tighter connection with the load. A triple swivel is attached to the main line, and through the winding rings there are two leashes, the diameter of which is smaller than the main line and largely depends on the type of bait. The length of one leash is up to 1 m, and the other – up to 50 cm. This design allows the fisherman to use two types of bait at the same time, but the disadvantage is the difficulty of casting. The sliding sinker is located on the main line.

A ball feeder can also be used as a sliding sinker. In general, when fishing, it is advisable to have a set of sinkers weighing from 10 to 70 g. The presence of fish at a given moment in a certain section of the river depends on many natural factors. For example, if after rains a fish runs aground, then bad weather drives it into the depths.

The wiring technique is as follows. After casting, the rod is held almost parallel to the water, and the sinker sinks to the bottom. After the load touches the ground, the end of the rod smoothly rises until it reaches a vertical position. There is a pause. Then, keeping the line taut, the rod smoothly lowers to its original position and again pause for 5 to 10 seconds. The whole wiring process consists of repeating the movements described earlier until the bite occurs. During retrieving, it is useful to change both the height of the rod and the duration of pauses. Much depends on the specific fishing conditions, the type of fish the angler is catching, and his practical experience. It is very important to remember at what place, height and pause the bite occurred, so that you can repeat it later. At a great distance from the fisherman, the bite is often unnoticeable, so hooking must be done at the slightest hint of it. During the retrieve, depending on the direction of the current and the choice of casting location, the bait may approach the shore and the angler. The faster the current, the more often the angler needs to pause. After the end of the drive and the pause, hooking must follow.

A bite is usually expressed either by twitching the rod tip or by straightening it. The hook should be sweeping, especially at a great distance. The thinner the rod tip, the more noticeable the bite. After making several trips and no bites, you should move to a new place, and it can be located either upstream or downstream, depending on the intended fishing route. You can use a wide variety of baits, it all depends on the time of year, fishing conditions and type of fish. The main fish that fishermen catch in the spring with a running bottom are ide, chub, bream, perch, podust, and roach.

Yazzies willingly follow the muddy streams of streams and rivulets flowing into the river. Ides also love areas with reverse flows, bushes hanging over the water, washouts near steep banks, and bottom rubble.

The chub prefers sections of rivers after rocky rifts with clay and other hard soil. For example, the same as the Iazis, but they try to avoid each other.

A characteristic feature of the bream parking and feeding areas is a weak current with depth, underwater ledges with muddy soil. The favorite sites for large perches are snags, accumulations of stones and other shelters behind which a predator can lie in ambush. Near such sections of the river you need to catch certain fish, using bait or without it.

Anatoly Zhuravlev April 28, 2012 at 00:00