Ready-made and homemade winter lures: how to lure perch in winter

03/07/2021 450 Winter fishing

Author: Alexander

Winter lures for perch differ from baits for other types of fish only in size. The choice of spinner is determined by the depth of the reservoir and the current. For example, in January, perch, like trophy humpback salmon, is caught using a spinner with a narrow body and noticeable weight, because the process takes place at great depths.

[Hide]

When and how to catch perch using lures in winter

You can start trolling as early as a week after the river freezes, but the most successful period for catching a predator is considered to be the end of winter, when the fish need to gain strength after the cold weather.

Winter perch fishing is divided into certain periods, depending on which the fisherman’s actions change:

1. At the beginning of winter, when the ice is not yet thick enough, “minke whales” live close to the shore. The peculiarity of this period of time is that, despite the rather greedy bite, you still have to look for fish, at least if your goal is large prey.
2. In the middle of winter. Perch can be found throughout the entire area of ​​the reservoir; predators are divided into schools of no more than seven individuals. Using the reconnaissance method, places with the most intense bite are found, and subsequently the fisherman will simply need to find these points on the reservoir again.
3. In February. The accuracy of determining the position of a perch reaches one and a half meters. At this time, the ice is already quite thick, and the angler will have to drill for sure.

An important element of almost any fishing is bait; its main purpose is to keep the school near the hole. Ideally, bait is carried out a day or two before the fishing itself, in this case the chance of success of the event increases significantly. For perch, store-bought food bloodworms are best suited. If it is possible to grow live bait in an aquarium, then this option is no less useful: live bloodworms will attract fish for a long time by burying themselves in the ground.

How to make a lure for perch

Let's look at the drawings, which indicate the dimensions of the spinners.

Matveychikova.

As you can see from the drawing, the shape is not at all complicated and with a minimum of costs you can make a catchy bait. To make it, you will need a metal plate, which can be easily straightened with a hammer from a copper tube by sawing lengthwise. To transfer a drawing; pencil, metal scriber. Anvil, hammer, chisel; to cut out the workpiece. A file for rough processing of a part, a needle file for fine processing. Vise; to bend the plate at an angle. Soldering iron, soldering flux, tin; solder the hook and loop and create the shape. Fine sandpaper, sewing needle; remove irregularities. Felt, goyim paste; for polishing. Having all the tools listed above, you can easily make a winter spinner for catching pike and perch, which has its own special appearance and game.

Video games of Matveychikov's spinners.

I'd like to note.

It is not necessary to use exactly the tool that I wrote about. For example: instead of a vice, you can take pliers, and in general, use any improvised tool that you have. The end result is important.

Carnation.

Classic spinner. Looking at the drawing, you can see that to make it you will need two plates, a hook and all the tools that were described above.

Manufacturing procedure.

We take the plate, transfer the drawings onto it, cut it out with a chisel or cut it out with scissors. We adjust the resulting blanks to size using a needle file. We bend the larger one in the indicated place. Using a lighter, lower the metal in the middle of the hook shank and cut it with wire cutters. Using pliers we bend the lowered one at an angle of 90 degrees and tin it. We grab the hook in the front part with solder, and the forend in the thin rear part. We tin the metal all over the base from the soldering side of the tip. We grab the second flat plate. We fill the space between them with tin. Using a file, then using a needle file, we remove the unevenness. We polish it and the winter lure for perch with our own hands is ready.

Tube.

Probably the easiest bait to make for catching perch in winter. To make it you will need any 7-12 mm tube. Drill, drill, ruler, hacksaw and needle file.

Manufacturing procedure.

We select a tube of the required diameter. Depending on the diameter, the size of the larger side is 50-80 mm. Marks are placed, and from there the angle at which the tube will be cut is selected. The front part is at an angle of 30-60 degrees towards the tail. The tail is at an angle of 20 degrees to the front. A hole is drilled in the long rear part for the winding ring for the hook. There are two more holes in the head front part. One hole is drilled on the long side, the other on the short side, for a carabiner. By changing the carabiner mount, we change the game of the bait.

For even greater catchability, the bait can be equipped with a turbine. The turbine is cut out from a tube of smaller diameter, 3-4 mm wide, and holes are drilled in the center opposite each other. At a distance of 5-6 mm from the edge to which the hook is attached, holes are also made opposite each other, into which a steel wire is inserted, a turbine is put on it in the holes, the wire is ground and rolled with tube material. The cut points are corrected with a needle file. The spoon is polished, the hook is attached and off you go for the trophies.

Castmaster.

Another catchable spoon, the castmaster spinner is also not difficult to make if you have the necessary material and tools.

There are three ways to make a castmaster or spinner with your own hands.

1. Sawing from a rod.
2. Sawing from a tube
3. Casting in plaster mold

Making winter lures for perch

The material used is any round or multifaceted rod with a diameter of 10-20 mm, most often copper, brass, or stainless steel.

Tool

• Ruler, protractor, scriber to mark the dimensions on the workpiece.
• Hacksaw, vice, needle file for cutting and rough processing of the spinner.
• Drill with a drill for making holes.
• Polishing accessories.

Making a spinner

First way

We clamp the rod in a vice and mark the angle of the cut. A mark is placed along the edge of the workpiece, an angle of 17 degrees to the left or right is selected from it, it does not matter, the first cut is made. We retreat 2 mm from the edge, select a second angle of 23 degrees, and cut it with a hacksaw. We trim the unevenness with a file, drill holes for the hook and carabiner, polish it, and assemble the lure.

The second method is from a tube.

Everything is the same, but the spinner turns out to be hollow and light. You can leave it as is, or you can make it heavier by first filling the void with molten lead or tin.

Third way

You will need plaster, lead, fire. According to the original, a mold is made in plaster and filled with molten lead.

Balda

Bottom tool for catching perch. Why? Because the play of this tackle is directly related to lowering it to the bottom. After it is lowered, they move it slightly without lifting it from the ground, creating the appearance of a swarming insect or fish in the mud, occasionally lifting it and lowering it back to the bottom. A do-it-yourself spinner for perch for winter fishing from the bottom is made quite simply.

Materials:

• Olive conical sinker.
• Two hooks with long or short shank
• Cambric or beads
• A piece or main line on a fishing rod.

Manufacturing:

We cut the cambrics, put them on hooks, the cambrics are needed in different colors and sizes. Wire insulation will do. A hole is made on the smaller side of the weight at a distance of 1.5-2 mm. A hook is placed on the main line with the tip away from the end, followed by a load and a second hook, dressed in the opposite direction to the first. The line is folded and a knot is tied. The gear is ready, all that remains is to start fishing.

Alga.

A very catchy classic S-shaped spoon. It is rarely done at home for perch fishing, since many people believe that this type of spoon is for pike. Because most often they are produced in large sizes and the most common is the third number. By making a similar Alga spinner, following the example of Protva, which I will discuss below, you can successfully catch perch.

Protva

Another oscillating catchable spoon similar in bend to the Algu, but with a narrower shape and an additional element such as a fin.

How to make a spinner with your own hands?

Due to the fact that there is an abundance of all kinds of fakes on the market, and prices for branded sporting goods are quite high, some fishermen prefer to make spoons from scrap materials. Despite the fact that the drawings of spinners for different types of fish may be the same, craftsmen make qualitative changes to the adjustment of the plate, which ensures its guaranteed reliability.

A homemade spoon, even of low quality, is a good chance for beginners to try themselves in this business by first catching small perch.

Algorithm of actions

Technology for making a spinner for winter fishing from a tin can:

1. Cut a straight sheet of metal using special scissors. After which the paper, paint and other unnecessary elements are removed.
2. On the sheet, draw and cut out the shape of the future spinner with scissors.
3. Remove burrs using sandpaper. Use an awl to make two holes for the winding rings. Thoroughly polish the lure.
4. Give the bait the desired shape using a spoon or other handy means.
5. Attach winding rings and hooks to the spoon. Apply appropriate designs with nail polish.

The creation of a catchy winter lure for perch is clearly demonstrated in the video from the Fishing channel with Romario Agro.

Catchy winter lures for perch: description and drawings

Making spinners for winter fishing does not require a lot of money and time. Some craftsmen make such baits within one hour, and the tools for this can be found in any fisherman’s barn or garage.

DIY winter spinner.

DIY spinner from a tin can

It is possible to find such raw material for making bait at home or in the trash. A can for canned food is made of thin metal, therefore, a spinner made from this material is more suitable for catching perch in stagnant bodies of water where there is no current.

During manufacture, you will need the following materials and tools:

• Tin.
• Metal scissors.
• Awl.
• Sandpaper.
• Number 7 hook or tee.
• Two winding rings.

Manufacturing technology:

• Preparatory work boils down to preparing a metal plate. To do this, take metal scissors and cut an even sheet of thin metal from a tin can.
• After this, everything unnecessary is removed from the plate: paint, paper, etc.
• The shape of the future bait is drawn on a sheet of metal, about 5-7 cm in size.
• Using metal scissors, according to the drawing, the shape of the future spinner is cut out.
• Use sandpaper to remove all burrs.
• Using an awl, two holes are made for the winding rings.
• The next stage is polishing the spoon.
• At the next stage, the petal is given the desired shape. To do this, you can use a regular spoon. To bend the spoon, you need to take a soft object and press on the petal until it takes the appropriate shape.
• After this, winding rings and hooks are attached to the spoon.
• Finally, appropriate designs are made on the body of the spinner using nail polish.
• After the varnish has dried, the spoon can be used. Naturally, it is unlikely that you will be able to catch a heavy perch using such a spoon, but it is quite possible to secure intense bites from small perches.

Small spoon made from tweezers

A lure such as a jig is made from a monolithic piece of metal such as silver, copper or brass. If the spinner is not large in size, then the body of the spinner can be made from ordinary tweezers.

For manufacturing you will need the following materials and tools:

• Tweezers.
• File.
• Electric drill.
• The drill is not large in diameter.
• Sandpaper.
• A pair of winding rings.
• Single hooks or tees.

Sequence of manufacturing operations:

• The outline of the future bait is drawn on the tweezers.
• The body of the jig is cut along the contour using a hacksaw.
• It is advisable to file sharp edges.
• At both ends of the artificial bait you need to drill holes for the winding rings.
• After this, the almost finished spoon is polished.
• Finally, winding rings and hooks are attached to the body of the bait.

Spoon spoon

A bait such as a jig can be made without much effort from the handle of an ordinary spoon. The manufacturing technique is the same as in the previous case; it is enough to cut the workpiece of the required length from the handle. The main task is to polish the workpiece properly so that it is visible in the water from afar. In addition, any painted elements, such as eyes or fins, will not interfere with the body of the bait, which will be an additional attractive factor.

"Triple" made of electrical cable

They make so-called “three-sided spoons”, which are considered good spoons for winter fishing. At the same time, it can be easily repeated with a minimum of effort.

To make the body of such a bait, it is enough to take a piece of aluminum cable, up to 1 cm wide and up to 6 cm long.

Technological stages of production:

• The body of the bait is cut so that it is shaped like a trapezoid.
• Thin holes are drilled at both ends of the bait's body.
• Winding rings and hooks are put into these holes.
• Such a bait weighs 5-7 grams and is capable of catching large perch in deep areas of the reservoir.

Castmaster spinner made of copper tube

“Kastmater” is produced and is considered a fairly catchy spoon. But you don’t have to buy it, as you can easily make it yourself.

To do this you need to have:

• A piece of copper tube with a diameter of up to 10 mm.
• Electric drill.
• Thin drills.
• A hacksaw for metal.
• Blowtorch.
• Sandpaper.
• Protractor.
• Needle files.
• Winding rings.
• Tee (hook).

Manufacturing technique:

• The copper tube is marked so that on one side there is a slope of 17 degrees.
• On the second side there is an angle of 23 degrees.
• Using a hacksaw for metal, the body of the spoon is cut according to the marked angles.
• The result should be a shape that resembles an elongated puck.
• The inside of the spinner should be filled with solder.
• Holes for winding rings are drilled on one and the other side of the spinner.
• The body of the spinner must be thoroughly sanded using sandpaper.
• Attach winding rings to the bait and install a tee.
• As practice shows, a homemade spoon is no less catchy than. In addition, the spinner can be colored at your discretion, which makes it especially attractive. As a result, a good mood from a good bait game.

Main types of perch spinners

Anyone who wants to test their strength in trolling must know the types of bait action depending on its variety. The behavior of the bait can be divided into four characters.

Gvozdik

This type of spinner got its name because of its vertical fall and is well suited for catching active perch. The bait is lowered to the bottom of a reservoir up to two meters deep, then a smooth rise of 15-30 centimeters is carried out and dumped.

Gliding lures for perch

Gliding or floating spoons are distinguished by their oscillation. Such baits fall in a horizontal position and go a decent distance from the hole. Externally, it is distinguished by concavities and convexities on the body, as well as noticeable curvature. The weight of such a spoon is less than a nail, and the permissible depth for effective fishing is from five to six meters. The bait slowly rises to a level of up to sixty centimeters and drops sharply.

Loose spoons

In the manufacture of such baits, technologies are used to shift the center of gravity to the middle of the product and symmetry of the sides with an acute angle in the center of the entire length. The fall is also different from other types; it occurs slowly in a horizontal position at the bottom, while the spoon creates small oscillatory movements. The bait slowly rises to any height and is dropped abruptly; in this case, throwing should be avoided.

Spinner "Step"

Another type of bait for winter trolling of perch. Externally it is a narrow strip with a concave shape. The game is played with a short swing and a sharp release of the spoon.

Photo gallery

Character of the game "Carnation"

Character of the game "Floating"

Character of the game "Step"

Character of the game "Lypuchka"

Features of manufacture and use

It is quite natural that the existence of all-season spinners is impossible. Each season requires the use of a certain type of bait. In warm months, spinners and rotating metal plates show excellent catchability.

In winter, the following types are used exclusively:

1. “Dragon” type baits are quite voluminous and weighty, and have 2-3 hooks. This type of metal plate is prohibited in many reservoirs, as it is recognized as poaching.
2. Lures that have the outline of a rocker - the hole for the line to pass through is located in the central part, and the hooks can be located at all ends.
3. Winter spinners of vertical type. One side is equipped with a hole for threading fishing line. The opposite side implies the location of the hooks.

During the cold winter months, vertical lures are used. During this period of time, it is very important to provide high-quality, exciting game during the period of diving and raising the gear.

Different types of spinners are also used depending on the fishing location. In areas with shallow depths, it is recommended to use rotating lures. In good sunny weather, it is advisable to offer the perch a copper-colored bait, and on cold, cloudy days, silver shades are better suited. The game is played alternately either near the surface of the water area or close to the bottom surface.

In deep places where the predator stays in the autumn months, it is better to use spoons. The execution of the game is wavy or stepped. It is recommended to perform slight swaying when retrieving, thereby attracting the close attention of the fish.

Rating of the best spinners for winter perch fishing

The main country producing spinners is Finland, whose baits are of high quality and reliability. But there are other options.

With the opportunity for fishermen to communicate on various thematic forums, a conditional rating of the most profitable and catchy lures according to professionals has become available:

1. Nils Master Hanski. A representative of Finnish models for catching perch and pike perch, the approximate cost of which is 470 rubles. A spinner with a chain and a triple hook, which is equipped with a rhinestone to attract the attention of a predator. The hook is also removable due to a special lock.
2. Kuusamo Sinfonia. This spoon, costing 360 rubles, is intended for use in reservoirs with standing water. From the wide variety of models, it is worth highlighting a bait with a length of forty millimeters and a weight of 6 grams, with which you can also catch pike or pike perch.
3. Kuusamo Kilpa-Loiste. It is an excellent option for small-sized bait costing 450 rubles. The surface of the bait is equipped with a special film that increases the visibility of the product due to the reflective effect.
4. Kuusamo Leija. There are several variations of the spinner, but the universal bait is fifty millimeters long and weighs six grams. The design has additional blades that allow sudden turns. The cost of the product is 350 rubles.
5. Kalamies 6 Hop-Mes. Quite an expensive spinner worth 650 rubles. It is distinguished by its impressive weight, due to which it is effective at a depth of up to eight meters.
6. Hali Lindroos Luxus. An excellent bait with a corrugated surface structure, successfully used in muddy water. The price of the bait is about 250 rubles.
7. Rapala Bergman BWB030 SG. Another spinner from the category of universal baits costing 350 rubles. Creates additional vibrations during vertical twitching.
8. Rapala SM-Pirken SM45-SG. A product with an increased range of motion when playing. The pattern of red dots is designed to attract additional attention from the perch. The price of such a spinner is about 280 rubles.
9. Rapala Arkku ARK 70 SG. A spinner with a tetrahedral surface and a classic oblong shape. Suitable for both calm water and fast currents. The cost of the bait is 400 rubles.
10. Lucky John Scandy. A Scandinavian type spinner, the main material for the manufacture of which is brass, due to which the bait weighs six grams and is only five millimeters long. The price of the product is 350 rubles.

DIY Minsk spinner. Catching perch with a winter Minsk spoon

Success when fishing with a lure depends on many factors, but the first place is the lure itself. There are a huge number of winter spinners for catching perch. We will not describe their numerous designs, but will focus only on two, in our opinion, the most universal.

Spoons for catching perch, first of all, must meet the following requirements: - have a short length (2.5-6 cm); — play well and consistently using different flashing techniques; - for fishing in shallow waters, be light, for deep water - heavy; - do not get caught in the fishing line while trolling; - be of different colors;

Today, when you come to the market or fishing store, you will be faced with a huge number of winter lures for catching perch. There is outright hackwork, but sometimes you can find beautifully made copies of excellent quality. You must be firmly aware that, having bought even the most beautiful and catchy lure, you may not catch anything with it, while others next to you using the same lure will pull in fish after fish.

The secret is that you simply do not know how to use this lure, since you do not know the principles of its operation. A necessary element of each spinner is its testing. At home, testing usually takes place in a bathtub filled to the brim with water. But, when setting up the spinner in the bathtub, you must clearly understand that the spinner, in this case, will play well in a pond only with the same swing.

If you like to spin while standing, then the swing is usually made wide, and, naturally, you need to adjust the play of the spinner in a deep container no less than the usual swing height. The Minskaya and Moskovskaya spinners, which will be discussed further, have excellent properties and ease of adjustment. They are made from thin sheet metal and filled with solder. You can also use lead, but then the technology for making spinners becomes somewhat more complicated.

The “Minsk” spinner is very simple in its design. It consists of a triangular plate that is filled with tin, and the center of gravity of the spoon is located in the thin front part of the spoon (Fig. 2). Despite the unusual design, this bait has extraordinary stability in the game. It is so easy to make that in an evening without much effort you can make up to 30 spinners of this type, but, unfortunately, they will be of different sizes.

The “Moscow” spoon is more like a fish, but its catchability is almost the same as the “Minsk” one. It is made in the same way, except that the sheet metal workpiece must be slightly bent, as a result of which soldering becomes somewhat more complicated (Fig. 3). These lures can be made with rigidly fixed single hooks and with freely suspended doubles or tees. These hook arrangements have their pros and cons.

A rigidly fixed hook allows the lure to play very stably, but such a lure creates fewer damped oscillations. Consequently, there is less pause between strokes. A spinner with a freely suspended double or tee sometimes gets caught in the fishing line, plays a little worse, but has much more damped oscillations and in the dead of winter allows you to achieve great success, since the pause between swings reaches 10-12 seconds, and the spinner moves more slowly.

The dimensions of the Minsk spinner are length 30mm, width of the upper part 5.5mm, width of the lower part 3.5mm.

Read other articles, reviews and testimonials:

• Fishing for bream in winter. Bait for winter bream fishing
• The best balancers for pike. How to choose a balancer for pike
• Lucky John Fin balancer review. Reviews from fishermen about balance beams Lucky John Fin
• Review of the Kuusamo Tasapaino winter balancer. Reviews of Kuusamo Tasapaino
• Which winter lure to choose for a beginner? Types of winter spinners

The most catchy lures for perch made in Russia

Top spinners from a domestic manufacturer:

1. Aqua Shniaga. The main purpose of this bait is slow gliding at depth. The cost is 80 rubles.
2. "Luck Pier No. 2." An inexpensive spinner that costs only 30 rubles. But despite its relative cheapness, it shows good results on various bodies of water.
3. "Orlovskaya lure zander 07". A versatile bait with a ribbed surface for use in troubled waters. Due to its specific shape, the game of the spinner imitates the behavior of small fish. Also suitable for catching zander and pike. The approximate cost is 120 rubles.
4. Russian Bait "Micro". An excellent spinner with a very complex and attractive game for predators due to the significantly lighter tail part of the bait. The product is also suitable for fishing in other fishing seasons. The price is 220 rubles.
5. Eco Pro Favorit. You should choose this spoon only for reservoirs with calm water. It is characterized by sweeping movements when playing, which provokes even passive predators to attack. The cost is about 300 rubles.

Drawing of a homemade working lure for perch

A drawing of a homemade working spoon for catching perch is shown in the picture. At the end of the topic, I will explain what, in my opinion, is the difference between a working perch spoon and the so-called catchable winter vertical perch spoon.

Although, there shouldn't be any difference at all. If the perch does not pay attention to the vertical “game” of the working spoon, then why do we need this person in the collapse of our baits?

A drawing or template will only be needed to immediately solder a batch of approximately identical WORKING homemade vertical spinners for catching perch on winter or summer fishing trips.

The definition of “workers” is not in vain - the Internet is teeming with offers to buy some mythical, so-called CATCHable winter lures for perch - homemade and industrially made. And, as I understand it, such a spoon should almost catch us a large perch without our participation.

True, for some reason the unsurpassed masters of such homemade products do not offer drawings of their wonderful winter vertical perch lures for public evaluation.

But, if you turn your head on for a while and think a little, then even a novice fisherman becomes clear: such spinners simply do not exist in nature. The same homemade vertical perch bait cannot work the same under different conditions for catching perch in winter and summer fishing, and no “secret” drawings will help it with this.

You can also get acquainted with the details of making working perch vertical lures according to drawings or according to some of your own estimates and considerations in a rather large topic covering several pages, starting with the article How to make a spinner for fishing.

Next, for your orientation, using the example of a drawing of a randomly selected vertical perch winter lure, I will introduce you to the essence of the topic. And I will name the conditions under which the bait chosen for catching perch can justify the name “catchable”.

Photo gallery

The photo shows various catchable spinners for winter fishing for perch.

Spinner "Nils Master Hanski"

Spinner “Kuusamo Sinfonia”

Spinner “Kuusamo Kilpa-Loiste”

Spinner "Kuusamo Leija"

Spinner “Rapala Bergman BWB030 SG”

Spinner “Rapala SM-Pirken SM45-SG”

Video: Testing a homemade spinner for perch

The video shows testing in the bathroom of the latest (at that time) batch of homemade winter working lures for perch, during which the bending radius along the longitudinal axis of some homemade products was changed. After which, naturally, their catch rate should have increased. All perch vertical lures are made according to the drawings located in the archive, which you, I hope, have already downloaded.

In this regard, I will give some explanations, since you can’t show everything in a short video and in the process of testing winter working spinners designed for vertical perch fishing at different depths and current strengths, you can’t tell about everything.

In the voice comments to the video, special attention is not paid to the length of the wires of perch vertical lures due to the shallow depth of the bath, which is clearly not enough for high-quality testing of some homemade baits.

But you should pay attention to the repeated monotony of the vertical game of any homemade winter lure for catching perch chosen at random for testing.

Testing at least in a home bath ends with checking the performance of each newly manufactured homemade spinner. After which the bait is considered either working and used in real perch fishing conditions, or it is fine-tuned to the required parameters.

This is, in theory, what it should be like for normal fishermen, of whom I don’t really consider myself, since, to be honest, I haven’t tested most of my homemade winter perch lures in the bathroom for a long time - the reservoir is shallow and the water is expensive. I immediately test the baits directly in winter perch fishing conditions.

All the same, the structure of the winter vertical perch working spinner has to be adjusted almost on every hole in real conditions for catching perch in winter fishing. And what is shown to you in the video frames is, rather, work for the public. Real fishing of perch vertical spinners in winter fishing conditions looks similar, but somewhat different.

By the way, during the testing process, I changed the longitudinal bending radii of some homemade winter lures for perch. To make it clearer, I slightly straightened the length or, on the contrary, bent the winter vertical lures even more.

Finally, at the end of the page we got to homemade catchy spinners for vertical perch fishing in winter and summer fishing... Let's see how they differ from ordinary working perch lures.

Video

As preparation and training, the Men's Company channel has prepared material about catching perch with spoons during the opening of the winter fishing season.

Loading …

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes

No (100.00%)

X

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate the benefit of the article: Rate the author ( 2 votes, average: 2.50 out of 5)

Discuss the article:

Homemade winter vertical lure for perch

A set of homemade spinners, selected for vertical perch fishing at different depths and current pressures in winter fishing conditions, is presented in the photo and it is unlikely that you have come across duplicates of homemade products in stores.

But they appear in abundance on pages with stolen content. They steal original drawings and photographs, passing them off as their photographed decoys.

My vertical homemade spinners for pike, pike perch and perch are called winter on the website, although no one forbids us to set up the tackle for vertically trolling perch with the same homemade baits in open water.

By the way, to save steep baits from a boat, I can offer you the design of my homemade detachment, which is quite easy to operate even for winter fishing from ice.

The homemade perch spoons brought to your attention were first tested in winter and summer fishing conditions back in the distant Soviet times.

Due to the natural loss of vertical baits, I naturally have to periodically replenish the equipment. To do this, I transferred the dimensions and contours of the most promising homemade perch spinners for winter and summer fishing to the drawings.

The video frames at the bottom of the page show the fresh last selection of homemade perch lures before he started picking off the baits on winter fishing trips.

And there’s nothing you can do about it... Even their own steep home-made fish are capable of tightly clinging to their favorite snags, and the veins that are in cahoots with them are treacherously torn, for which there are reasons: often you have to look for perch with a lure on a winter fishing rod in impassable underwater snags.

By the way, before you dive into too deep a study of the topic, in the frames of three videos, evaluate the game of my homemade balancers - quite promising baits for winter fishing on the first and last ice, where attention-worthy perch feeds at the beginning and end of winter.