Spinning rod for trolling on rivers and lakes: how to choose

Unlike fishermen who like to sit with a fishing rod in a cozy place on the bank of a small river, there is an army of active individuals who, in order to fish, necessarily need to move across the expanses of water in search of fish in the depths of the seas, lakes and rivers.

This is called trolling in international language, but in our language it is called fishing on a lane from a boat, which requires a special spinning tool for trolling.

The editors of the YaNashla website present a rating of the best fishing rods for these purposes and answer questions about how to choose a spinning rod for trolling, which one is better to buy, and how much this or that model costs.

Tackle

Trolling gear differs little in appearance from spinning rods for casting fishing. Use rods with guide rings and reels. But specific gear models are selected taking into account the specifics of trolling fishing:

casting bait is not required, so the throwing qualities of the blank are not important;
trolling is a way of hunting primarily for predators, and such fishing requires powerful gear;
the rod spends most of its time in the holder, so its weight does not matter much;
The sensitivity of the gear is not as important as when casting.

Inertia-free and multiplier reels are used. The former are suitable for hunting small fish with light and medium-weight baits. To catch a trophy predator by trolling, you should use multipliers. These reels are powerful and durable.

Choosing a trolling spinning rod

A trolling rod, like any spinning rod, has a number of basic characteristics that an experienced fisherman must pay attention to:

"Test" of the rod. This is the test load for which the spinning rod is designed.
Length.
Material of manufacture.
“Build” the rod.
Quality of pass rings.

Trolling rod type

There are many different types of fishing rods designed for different fishing methods. For trolling it can be as follows:

Telescopic type , with a sensitive tip, consisting of 5 - 6 elbows.
Plug type . Such a spinning rod can be either one-piece (single-armed) or consisting of two arms, connected when equipping the tackle using a plug-in method.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Important! Plug-type rods are more reliable and convenient when used in trolling fishing.

When fishing on large bodies of water, from large boats, plug rods of increased length, consisting of three or (rarely) four legs, can be used.

Length

Most of the world's manufacturers specialize in producing forms from 1.2 meters to 3 meters . In the vast majority of cases, when fishing from a boat with low sides, rods from 1.9 m to 2.4 m . Forms exceeding 2.4 m are used for trolling from large vessels, or in cases where the line is expected to be released at 60 m or more.

Often, to increase the convenience of fishing and expand the coverage area of a pond with bait, trolling spinning rods of different lengths are installed on the boat, for example, 1.9 m, 2.1 m and 2.7 m. This also reduces the likelihood of tangling gear of different rods.

Rod build

Trolling spinning rods are not used for long-distance casting of bait. There is no need for this. The structure of a spinning rod for trolling is of particular importance when hooking and then retrieving a trophy. And since with this method of fishing, in most cases, large fish are caught, it is important that the upper part of the rod actively works. This means that fishing rods for this type of fishing require either extra-fast action (EF) or fast action (F) .

It is determined with the help of a partner or a salesperson in a store. It should hold the tip of the assembled spinning rod, while you slowly lift it or move it to the side. The bending of the form will be:

For Extra-Fast , the upper ¼ of the blank bends.
For Fast, the upper 1/3 part is bent.

In rare cases, when fishing this way, it is justified to use a rod with a medium (M) action .

Test characteristics

The fishing stick test determines the weight categories of baits for which it is intended. As a rule, it is indicated just above the handle in the form of two numbers. For example: 10 – 30 g, this means that this rod is designed for fishing with lures weighing from 10 to 30 grams. The most complete correspondence of the weight of the bait with the test of the trolling rod ensures the necessary sensitivity of the entire tackle.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Healthy! The lower the test value of a rod, the more sensitive it is. The larger the test, the stronger it is.

When choosing a trolling spinning rod, its test value is one of the main criteria. As a rule, they are designed to handle fairly heavy baits, so their tests can range from 30 to 250 grams. Sometimes more. Of course, there is a certain gradation of these test limits.

To decide which fishing rod is right for you, you first need to understand what size and weight of bait you will be using when fishing. For trolling beginners, it is recommended to use spinners and wobblers weighing no more than 50 grams. Accordingly, the rod test should be designed for such a weight, for example 30 – 80 grams.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am interested in fishing at a professional level.

Important! A rod for trolling on a river with a strong current should be used with a higher upper test limit. This is due to the influence of the current on it, in addition to the weight of the bait.

It is advisable for every trolling fan to have spinning rods with different tests. This will allow you to use baits of different weights and sizes at the same time, which will increase the efficiency of each “pass” on the boat.

Material of manufacture

A fishing rod for trolling should combine increased strength with good sensitivity . It's also nice if it's light enough. This is especially important when fishing and when carrying gear. All these properties of the form depend on the material it is made of. Currently, the most common “sticks” are:

Fiberglass. This is the cheapest and most common manufacturing option. This material provides all the necessary strength characteristics of a fishing rod, but in combination with slightly reduced sensitivity. In addition, such spinning rods are quite heavy.
Composite material. These are more technologically advanced and high-quality fishing rods. They are somewhat lighter and much more sensitive than fiberglass ones.
Carbon fiber. Such spinning rods are the highest quality, but also the most expensive. They are lightweight, but at the same time very durable and sensitive. They have proven themselves well among experienced fishermen.

When trolling, the rod experiences a fairly high load. It is especially intensified when fishing for a large trophy. Therefore, the rod must be free of defects and equipped with high-quality rings.

Passing rings

A rod suitable for trolling should be equipped with heavy-duty wire guides . There should be a sufficient number of them to ensure sufficient sensitivity and strength of the form. The inner surface of the rings can be metal, enamel-coated, or ceramic. The presence of chips, cracks and other damage on the rings is unacceptable. The strength of the fastening of the rings to the blank is important. Particular attention should be paid to the “tulip”.

Spinning rod weight

The weight of a trolling rod does not matter as much as for a conventional spinning rod, because most of the fishing time it will be attached to the boat. However, the lighter it is, the more enjoyable the process of landing the caught fish is.

This indicator depends on several factors:

The specific gravity of the material from which the fishing rod is made.
Its length.
Number of pass rings.
Handle material.

For fishing with this method, as a rule, “sticks” weighing from 280 to 900 grams are suitable.

Division into classes

All spinning rods are conventionally divided into classes. This division is based on the test already described above. 7 main classes of fishing rods have been defined:

Ultra-light class (UL).
Light class (L).
Medium-light (ML).
Medium (M).
Medium-heavy (MH).
Heavy (H).
Super heavy (XH).

For trolling in fresh waters, “MN” and “H” classes of fishing rods are applicable. And for fishing at sea - class XN .

How to choose a trolling rod in a store

Before you go to the store to make a purchase, it is worth getting a clear idea of the conditions in which fishing will take place and what the size of future trophies will be. This will allow you to choose a suitable fishing rod.

Main characteristics

When choosing a suitable spinning rod for trolling, you need to pay attention to the main characteristics:

rod type;
the material from which the form is made;
system;
test;
length.

For trolling, you can use forms designed for use with spinning reels and casting models. Casting-type rods are used to fish with multipliers. They differ in the structure of the handle and the shape of the access rings.

Action characterizes the ability of a trolling rod to bend under load. A more flexible blank absorbs fish jerks well, but it is less informative, and when fishing with it it is more difficult to hook a fish. Rigid rods convey all the nuances of the bait and clearly hook the fish. But when fishing, they hardly soften the jerks of a hooked trophy, so for fishing with such spinning rods, experienced fishermen choose high-quality reels with good friction brakes.

Which of the two trolling gear options you prefer—a stiffer or a softer rod—depends on personal preference. When choosing such a blank, you need to find a balance between sensitivity and the ability to comfortably fish for large trophies.

Test - the recommended range of weights of baits that can be fished with one or another form. You need to pay attention to this parameter when purchasing a spinning rod for trolling in order to be able to use spinners, wobblers and additional equipment of the required sizes. Also, rods with high tests have great power and allow you to fish for both medium and large trophies.

Spinning rods used for trolling on a river or lake are much lighter than sea rods and have smaller test ranges.

Form material

Trolling rods are made by:

fiberglass;
from composite;
made of carbon fiber.

Based on the material of the form, we can draw a conclusion about the characteristics of the gear:

fiberglass spinning rods are the most durable, they can withstand heavy loads, but at the same time they weigh a lot and have the least sensitivity; such rods are suitable for hunting trophy specimens;
carbon fiber - lightweight and sensitive, they are suitable for catching small fish;
Composite forms are an intermediate option between the first two.

Build and test

For trolling, it is preferable to use spinning rods of medium-fast, fast and ultra-fast action. The first ones bend up to half of the form under load. A fast action rod bends in the last third of its length, an ultra-fast action spinning rod bends in the last quarter. Each type is characterized by a certain arrangement of rings. This is necessary to evenly distribute the load across the form.

The test is selected based on the expected fishing conditions. For trolling in shallow freshwater bodies, a blank with the upper limit of the test range of 30 g is sufficient. In sea fishing, rods with a test weight of up to several hundred grams are used.

Length

The optimal length of a spinning rod for trolling is about 2.1 m. A rod with a length of 2 m or less is convenient for use in a boat, but when fishing with it it is more difficult to control the bait. Forms larger than 2.40 are usually not used for trolling.

The exception is situations when fishing is carried out in an area with strong differences in depth or several rods are used at the same time. A trolling blank with a length of 2.7 or even 3 m allows you to quickly change the horizon of movement of the bait and reduces the risk of tangling the rigs with each other to a minimum.

How to choose the right spinning rod for trolling

When starting to select trolling gear, determine:

where and on what type of reservoir the predator will be caught;
what size and weight of bait will be used by the fisherman during the hunt;
what type and size of trophy is planned to be caught during trolling fishing;
how many rods will be used to fish from one boat?

Having decided on the initial data before purchasing a trolling rod, all that remains is to focus on the presence of the necessary design features and optimal operating parameters in one product. These indicators include:

tackle form material;
the diameter of the guide rings, the method of attaching them to the rod and the material of the inserts of the element used on the spinning blank;
rod length;
spinning test;
construction of the tackle form.

Having an algorithm for selecting a fishing tool, all that remains is to decide on the nuances of each parameter, which we will analyze in detail in the continuation of the article.

Trolling rod length

Due to the principle of this fishing method, a trolling rod will be used in cramped conditions of a vessel. Consequently, its massiveness, excessive and unjustified, from a practical point of view, length will become obvious disadvantages in the comfort of fishing. To some extent, long spinning rods are convenient when fishing on overgrown reservoirs, because in such cases the bait can be moved away from the obstacle with a short movement to the side by the tackle itself. Also, the length of the rod is important when fishing from a boat with several tackles, either by one or a pair, or even a large number of fishermen.

Differences in the length of gear help to more effectively set baits, wind lines and land fish, without interfering with each other. Spinning rods for trolling on a river or lake are optimal in lengths from 2 to 2.5 meters. When buying two tackles for simultaneous fishing from one boat, it is justified to purchase a rod of 2.1 meters and a rod with a blank length of 2.3 meters or in variations of 2.2 meters and 2.5. The specified lengths of spinning gear are considered in the fishing community to be optimal and most convenient for lake and river trolling.

Form material

Whether it is a rod for trolling on a river or on a lake, this type of fishing is never put on the same dynamism level as classic casting spinning tackle. In trolling, the dynamics of hunting and the participation of the fisherman in it are much lower and do not require constant contact between the fisherman and the rod, which occurs only periodically when feeding bait, reeling in the line and landing fish. Consequently, the requirements for the weight of the fishing rod are low, and are not considered a critical indicator. This gives reason to choose a fishing rod made of more durable materials.

Important! When trolling, spinning rods made from fiberglass have proven themselves to be quite good.

Having high ductility and strength, fiberglass is resistant to impact loads and is less susceptible to deformation due to compression. Shock loads, especially in metal boats, are common when trolling, and the cramped space of the craft does not guarantee that, as a result of the regrouping of fishermen in the boat, someone will not accidentally crush the gear. In addition to the presented positive aspects of fiberglass, we also note the low cost of such gear.

The use of carbon fiber and composite spinning rods is not excluded, but all these equipment options will have to be given attention in the form of increased caution during operation and transportation. When purchasing tackle, choose a screw reel seat made of metal, which guarantees reliable fixation of the mechanism on the butt of the tackle. A backlash-free connection is important for high loads on the equipment during high-speed retrieves of heavy baits, unexpected hooks and playing powerful fish. Regarding the rod handle, it is worth noting that neoprene models are more durable in relation to cork while having almost similar qualities in terms of ergonomic material. In addition, neoprene does not crumble upon impact and does not sour from frequent wetting in water. To summarize, we determine that a budget fiberglass spinning rod with a neoprene handle will be the best option for a trolling tool.

Spinning rings

Rings for the power style of fishing, which is trolling, play an important role in the design of the gear. Spinning rods for trolling should have wide rings with a large diameter. This is due to the long unwinding of thick braided cords, which sometimes reaches a hundred or more meters, which, when wound onto the spool of the reel, carrying even small debris, contribute to the clogging of small rings with dirt, and, consequently, seriously hinder the winding of the cord. Another important nuance of selection is the presence of reinforced fastening of the ring, without taking into account what material the rod blank will be made of. Reinforced fastening is determined from the number of fastening legs, and there must be at least three of them, and their height, the lower they are, the more reliable the connection of the element with the form. A mandatory attribute of the winding ring in a spinning rod for trolling is the presence of a ceramic liner.

Important! The inserts must have a perfectly polished surface and sit firmly in the ring cage without play or wobble.

Ceramic ring inserts ideally cope with rigid braided cords, which, under the influence of loads from constant power wiring, quickly deform and cut stainless steel rings, and even more so plastics or polymers.

Rod build

Trolling spinning rods, being subjected to loads that sharply increase in amplitude as a result of fish bites and unexpected hooks, must have certain qualities of absorbing excess force impacts. Ultra-fast and fast action of the tackle can provide reliable hooking, but will not be able to withstand the high rate of growth of the force load, ultimately leading to the form breaking. Slow blanks will ideally cope with a critical load, leaving the tackle intact as a result of an unexpected shock, but when retrieving heavy baits, the blank will fail, disrupting the course of the game, and, consequently, reducing the effectiveness and attractiveness of the retrieve.

Important! For trolling, buy rods with a medium action, otherwise known as parabolics. Only such properties of the gear can bring the bait to the optimal operating parameters of their game and at the same time absorb the load that is rapidly increasing in strength.

Thus, the parabolic structure of the blank balances the weight of the bait and reduces the effects of critical overloads.

Spinning test

The spinning rod test for trolling is selected based on the mass of bait used in fishing. To make the right decision on purchasing gear, the angler must decide on the group of baits most used when fishing, and to a large extent these are heavy wobblers, and based on this data, select the optimal range. Wide test limits are not considered a disadvantage in trolling tools, as when selecting a spinning rod for casting, where sensitive and delicate tackle is required.

Larger limits, on the contrary, unify the weapon and allow the use of a huge arsenal of wobblers of different types of play. For lake and river trolling in shallow waters, spinning rods with weights from 20 to 50 grams are suitable. For medium depths and heavier lures, a test level of 40-80 grams covers most conditions. For constant fishing at extreme depths with massive and dynamic wobblers, the test range from 70 to 130 grams is just right.

Line selection

When equipping a spinning rod for trolling, use monofilament or braided fishing line.

Advantages of monofilament:

the ability to absorb fish jerks due to high elongation;
stealth in water;
affordable price.

Pros of braided fishing line:

low elongation, which ensures high sensitivity of the tackle and allows you to make sharp hooks;
high strength with a small diameter - the fishing line has minimal resistance to water, so the bait sinks deeper, while the cord is strong enough to tear the equipment out of the hooks.

Which of these options to choose depends on personal preference. Braid is most often used, but monofilament is also used for trolling fish of any size.

Features of a trolling rod

Specialized stores offer various models. When choosing a product, you need to consider the following features:

test
length;
system;
materials used for manufacturing (properties).

Each model is designed for specific fishing conditions. Every “detail” needs to be taken into account. Example:

current or standing water;
sea or river.

And the following factors also influence the choice of product:

the number of spinning rods used for fishing on one craft;
wiring depth;
weight and shape of baits.

Material

Trolling is active fishing. There is a lot of load on the spinning rod.

Recommendations:

An overly powerful model will not be sensitive enough. In this case, it will be difficult to notice bites. A weak model may not withstand the load. We need to find a middle ground.
A high-quality spinning rod must first dampen the jerks of the victim, and then the so-called friction of the reel.

What materials are used to make trolling rods?

1. Carbon. Characteristics:

poor machinability;
high fragility;
ease;
excellent sensitivity.

2. Composite. This is an artificially created material. It consists of several components. Composite is a material that combines strength and elegance.

The following components can be used:

fiberglass;
carbon;
fiberglass
fiberglass;
plastic, etc.

3. Fiberglass. Characteristics:

not sensitive enough;
high strength;
unpretentiousness;
low cost.

4. Carbon fiber. Superior composite material. Has high strength. Used to make various products.

Products made from fiberglass are the most affordable. The most popular are spinning rods made from composite materials.

Length

The optimal rod length is 1.9–2.4 meters. Recommendations:

Sometimes gear 2.7–3 meters long may be required. Such gear is used when you need to spread the bait to the sides. In this case, a sufficiently large line release should be used (45–65 m).
Sometimes you need to use gear 2.4–2.7 m long. If the length of the craft is 5–8 m. You can place the gear in different places.

Build

For trolling fishing you need to use gear with the following structure:

FF (very fast action). Such products bend under a load of 1/4 of the form.
F (fast action). Such rods bend when the blank is loaded with 1/3.

Other classification:

medium-fast (universal models);
fast and super-fast (leadcore);
parabolic (downrigger).

There are two types of construction:

Downrigger. Choosing a spinning rod of this system is quite simple. When choosing a product, you need to consider the size of the watercraft.
Glider. Characteristics:
characterized by the presence of a large number of gatherings;
jerks and blows are not softened;
has high rigidity and vibration resistance.

For beginners, it is better to use spinning rods with a medium-fast action. Since they have good sensitivity and reliability.es here

Test

The test is an important characteristic. If you take test indicators into account when choosing, this will have a positive effect on the sensitivity of the entire gear.

But many fishermen neglect this characteristic. The test indicator must be selected under water. You also need to take into account the weight of the bait.

Recommendations:

1. Test 2–20 g. Used when fishing in shallow waters. The following baits are used:

"rubber"
wobblers;
oscillators.

2. Test 50–150 g. Used on rivers with strong currents. The following baits are used:

silicone fish;
heavy spoons;
big wobblers.

3. Test 60–120 and 30–60 g. Two rods are used simultaneously:

one is used for catching large fish;
the second is used for catching small fish.

Trolling equipment

When assembling equipment for trolling fishing, the bait is mounted at the end of the main fishing line or on a leash. Installation may include a sinker required to penetrate to the desired level.

Special devices are also used in trolling:

downriggers, which serve to deepen the bait;
outriggers, which are necessary to move the bait to the sides of the boat - this allows you to avoid tangling the rigs and fish a large area of water.

Posting baits

If when casting, wobblers with a depth of no more than 3 meters are used, then for trolling baits with a depth of more than 10 meters can be used. When fishing from the shore, the wobbler simply will not have time to dive to a depth of more than 3 meters during reeling and reeling to the shore. True, there are certain devices that help wobblers sink to such depths even when casting, but they are used more often during trolling.

Consequently, the spinning rod experiences increased load during trolling, since to go deeper than 10 meters, wobblers with a long and often wide blade are used, which creates a lot of resistance during retrieving. In addition, wobblers for trolling are usually an order of magnitude larger than wobblers for casting, which also creates additional resistance. And the length of some deep-sea wobblers for trolling can reach 16 centimeters .

The influence of bait speed

The spinning speed of the bait towed behind a boat with a motor also affects the spinning. If at a speed of about 3 km per hour the wobbler moves approximately the same as when reeling in with a spinning rod, then trolling sometimes uses trolling modes when the speed of a small vessel reaches 5 km per hour.

Prices

Some consider trolling an elitist form of fishing, which is not accessible to everyone. But in fact, you can fish with it in any body of medium or large size, and there is a lot of gear on sale in different price ranges. Such rods cost from 1000 rubles. You will have to pay a little more for the reel - at least 1,500 rubles.

But considering that trolling involves fighting large trophies, it is better to opt for gear of at least the mid-price segment. With such forms, fishing will be comfortable and productive.

Trolling rod material

Since there is a lot of mud and algae underwater, which during trolling stick to the fishing line and reach the bait, the rod ends up being subjected to a considerable load. When choosing, you need to take into account that it is the rod that will be the first to dampen the jerks of the fish and only then the drag of the reel.

A weak rod will not be suitable for trolling, and an overly powerful one will not be sensitive enough, you simply will not notice a number of weak bites.

Therefore, the optimal material for trolling rods is carbon fiber (carbon), fiberglass or composite, lightweight and durable modern materials. Carbon rods are more sensitive and lighter, but also more fragile.

Fiberglass is durable and unpretentious, but less sensitive.
Composite fishing rods must be selected based on the percentage of the constituent materials.

Many anglers prefer to hold the rod in their hand or, as a last resort, hold it with their foot while operating the engine. Thus, the movement of the wobbler is better felt and sensitivity increases. Naturally, when spending the whole day fishing, you need to choose a rod that is light in weight and comfortable to grip.

A spinning rod for trolling should have a comfortable long handle that can be rested on your elbow if necessary. Some may like rod models with devices for resting the rods on the belt, which will make it much easier to land large fish.

The best models of spinning rods for trolling

When choosing a spinning rod for trolling, it is better to avoid buying cheap gear from little-known manufacturers. There are proven models for sale in any test range from 1.8 to 3 m in length, which invariably receive positive reviews from anglers. You should pay attention to them first.

Strike Force Trolling Special by Daiwa

A series of plug-in composite trolling rods, which were originally developed for fishermen from Scandinavia. The line includes rods with lengths from 1.8 to 2.6 m.

Power Stick Trolling by Salmo

Inexpensive spinning rod for fishing on rivers and lakes, 2.4 m long with a test weight of 50 to 100 g. Any type of bait can be used with this rod. It has a large reserve of power, it allows you to perform precise hooks and holds the fish well while playing.

Surf Master Spider

A plug blank made of composite, which is suitable for fishing in fresh waters, and trolling in the sea at shallow depths. Its test range is from 80 to 150 g. The series includes whips with lengths from 1.65 to 2.4 m.

Ninja Boat Interline by Daiwa

For fishing in freshwater reservoirs and in the seas with a dough from 100 to 300 g. Available in two sizes - 2.4 m and 2.7 m. This lightweight blank is lightweight with a high safety margin.

Spro Salty Beast Mega

For sea trolling, designed for hunting trophy fish. Its length is 2.1, the upper limit of the test range is 400 g. It has a fast action, can be disassembled into two parts - a handle and a solid form. Can be used for vertical fishing in the sea.

Rating of spinning rods for trolling TOP-10

You can choose a good spinning rod that has earned the trust of fishermen using a rating review, which includes popular models in an affordable price range.

Penn Squadron Travel Boat

The plug rod is 215 cm long, weighs 493 g. When folded, the length is 46 cm. Five-section ultra-fast action. The main material for making the blank is a composite with a low resin concentration and a high carbon fiber content. The passage rings are made of aluminum oxide and reinforced with additional supports. Black microporous neoprene handle.

Advantages:

compactness for transportation;
durable reel;
reliable fittings.

Disadvantages: takes time to assemble.

The rod can be selected for using heavy and medium lures. The cost is in the range of 8,000 - 10,000 rubles.

Boat rod

Black Hole INTERCEPTOR 210

The best spinning rod in the line of inexpensive trolling models. Length 210 cm, weight 288 g. Optimal combination of lightness and strength. The maximum test load is 100g. The two-screw design of the aluminum holder secures the reel firmly. The cost of the model is 9000 – 9500 rubles.

Advantages:

reliable neoprene fasteners with Velcro for transportation;
strong handle made of polymer material.

Disadvantages: silk cover, subject to rapid wear.

New series of trolling rods

Shimano EXAGE AX STC TROLLING 30

Plug-in four-section rod. Length 210 cm, weight 594 g. When assembled, the product is 61 cm long. Powerful with a blank made of composite material with a predominance of graphite. Rings are reinforced with inserts, ergonomic neoprene handle. Shimano (Shimano) made in Japan is designed for catching trophy predators in deep rivers and deep waters. Cost 2200 – 2500 rubles.

Advantages:

reliable tube for transportation;
reasonable price.

No deficiencies were identified.

Good trolling rod

Salmo Power Stick Trolling

The plug structure is made of durable composite material. Length 240 cm, in transport form 125 cm. The top of the form is made of fiberglass. A powerful spinning rod with good sensitivity, designed to use bait weighing up to 100 g. Attaching the knees is based on the principle of inserting the lower one into the upper one. Durable urea rings are lightweight, reliable, and do not corrode. Suitable for trolling near thickets and for jerking. Cost 6000-65000 rubles.

Advantages:

comfortable handle;
reliable reel seat

No deficiencies were identified.

Great rod

Surf Master Spider

Budget class two-piece fishing rod. Manufacturing material – fiberglass. Length 270 cm. The model is suitable for fishing for many predatory fish. The pass rings are fixed in the form. The rod is convenient for novice fishermen in trolling and can withstand heavy loads. Stainless steel reel holder, neoprene handle. The cost of the rod is 1500-1800 rubles.

Advantages:

power;
low price.

Disadvantages: low sensitivity.

Made from durable materials

Black Hole Bassmania

A two-section spinning rod from Korean manufacturers is one of the most popular in river hunting. Spinning with dough up to 50 g, reliable, lightweight. Speed of construction distinguishes the model range. The blank material is graphite. Cost 3000-3600 rubles.

Advantages:

high sensitivity;
wide functionality;
coating of handles with shock-absorbing properties

Disadvantages: low strength of rods, weakening of joints.

Excellent model spinning rod model

Shimano BeastMaster

Japanese spinning rods come in various models. Designed for trolling with a length of 275 cm and a weight of 275 g. The blank material is high-modulus carbon. Passing rings with an original frame design improve the use of braided cords. Test up to 80 g with a parabolic characteristic contributes to the effectiveness of trolling at depths and casting hunting in shallow waters. Cost 3500-4000 rubles.

Advantages:

spool holder strength;
high sensitivity.

No deficiencies were identified.

One of the popular models

Shimano Catana

Relatively heavy, weighing 590 g, intended for hunting in coastal sea waters. The length of the form is 240 cm. The material is made using original technology from three-layer carbon fabric. Slow action is suitable for catching valuable trophies.

The rod is equipped with nine rings and titanium inserts. Thanks to the frame design, free movement of the braided cord is ensured. Budget cost 1000-1500 rubles.

Advantages:

progressive ring structure;
long durable handle;
high sensitivity.

Disadvantages: red color of the form.

Very famous model

Daiwa Strike Force Trolling Special

Powerful fishing rods are made of composite materials. Designed for universal catching of both small and heavy predators. Two-section spinning rods are equipped with aluminum rings. Comfortable handle, sensitive tip, solid spool holder. Cost from 1300 rubles.

Advantages:

strength of the form;
reliable fittings.

Disadvantages: Cork handles crumble over time.

Trophy catching tool

Techniques and tactics of fishing with trolling spinning rod

Before you start fishing, you need to study the water area using an echo sounder to determine the route of the boat. During retrieval, the bait should pass through as many holes and snags as possible. In the river you can move along the channel edge, where a large predator always stays.

Having directed the boat along the chosen route, you need to lower the baits into the water one by one and release the required amount of fishing line from the reels. For fishing in fresh water bodies, it is enough to unwind a few tens of meters of cord; when hunting in the open ocean for a trophy marine predator, the rig is released hundreds of meters.

While fishing, you need to monitor the depth of the bait. It should follow close to the bottom, periodically touching it. To lower the bait deeper, you need to remove more line from the reel, to raise the equipment - reel in the cord. When trolling, you need to navigate using the echo sounder and change the bait release depth.

When a bite occurs on one of the rods, you need to stop the boat, pull the tackle out of the holder and make a hook. The lines of the remaining spinning rods must be wound so that they do not interfere. Then you can start fishing.

Thus, there is nothing difficult about trolling. Anyone who has at least basic knowledge of spinning can choose a suitable form and master the fishing technique. Trolling produces excellent catches and is especially good for hunting trophy fish. Therefore, it is worth trying if you have not yet done so.

Build and test

The sensitivity of the rod, as well as its strength, is affected by the test and action. It is best to start with a fast (F) or very fast (FF) action rod with a weight of up to 80g.

In spinning rods with super fast action, about 1/4 of the blank bends under load, and in fast models, the bend is 1/3 of the rod.

When using heavy baits , large and deep wobblers, the spinning test should be in the range of 100-150 g. This is especially important when fishing on a river with a strong current.

If you use two spinning rods when fishing , then one can be taken with a fast action with a casting of 30-60 g, and the second tackle can be of a very fast action with a casting of 50-100 g.

When fishing in shallow water with bait weighing 8-10 g, it is better to use lighter and more sensitive rods.

How to choose a trolling baitcasting reel and what parameters to especially pay attention to.
Lures and jig fishing techniques when hunting for pike perch further.
Make the leaders of your spinning rigs from fishing line that is invisible in the water, read more about fluorocarbon.

Practicing hooks and strikes with a spinning rod

Specific conditions for trolling fishing also include practicing hooks and strikes with a spinning rod when the bait touches the bottom. If, when casting, such hooks on the bottom are immediately extinguished by stopping the reeling, then when the motor boat moves and the bait catches on an uneven bottom or snag, the bait should stop abruptly and hit the rod. To some extent, such a blow can be compensated by the friction brake, but still the first and main load falls on the rod. In addition, the friction brake is not always adjusted to the required load.