Fishing for bream with an elastic band: tackle for fishing on lakes and rivers in August, fishing with casting from the shore, from a boat, on the current

Choosing a place to fish with an elastic band

The key to successful fishing for bream with an elastic band is choosing a good place. The fish likes to hide in the depths, and in order to catch it, you should take into account the topography of a particular body of water, the flatness of the coastline, and the presence of steep areas. Bream lives in many freshwater reservoirs, lakes, bays, rivers and reservoirs, and lives in schools.

On the lake

In lakes, bream prefers to live in deep places without vegetation and with a hard bottom. It almost never goes into grassy areas, so trying to catch a large fish there is almost useless. The best option is if you manage to determine the location in the bottom topography, where there are exits from pits or deep drops. In the evening, to move to the shore, bream uses various folds in the terrain, making their way along them, as if through ditches.

Did you know? In salt water, bream goes blind, so in the seas it is found only in places where rivers with fresh water flow into it.

At night it feeds in shallow coastal areas. To determine a good place, you need to study the bottom a few days before fishing. If you have a boat, you can use a depth gauge to “tap” the bottom, determining the differences. The best way is to use a special device - an echo sounder, which in a few minutes will give accurate characteristics of the bottom topography.

On the river

Large bream can often be found in deep rivers with a slow current. In small lowland rivers, fish rarely reach impressive sizes, so fishermen will have to be content with bream.

You should search in holes and low-lying areas of river beds. You can try casting under a steep bank.
If it is possible to examine the bottom with an echo sounder, identify areas where the clay bottom borders on shell rock, as well as the exit points from the pits.

Technique for fishing with a rubber band and casting from the shore

Let's look at all the tricks of fishing with an elastic band, starting with the obvious advantages of the method:

The load is cast once, and there is no need for repeated casts to scare away the fish.
The elastic band does a good job of absorbing the jerks of strong fish.
The process of changing bait is simplified - it is done by weight.
Baited hooks always return to the same place.
The donka with an elastic band has excellent sensitivity to bites.

There is only one drawback - without certain casting skills, you can seriously tangle the line. However, if everything worked out, further fishing will not be difficult.

Carefully study the video, it clearly shows how to cast and not tangle the line.

How to throw (start) a donk with an elastic band

Before casting, all the gear, from the elastic to the reel, is unwound and laid out in a spiral on the shore, so that there is no interference from stones or vegetation.
A weight is securely tied to the end of the elastic band.
The reel with a supply of fishing line is attached to a peg (you can hold it in your free hand).
Standing on the side of the laid out fishing line, the fisherman casts the load to the desired place. If this is a river, you should take into account the drift of the load by the current before it sinks to the bottom.
A pause of 5-10 minutes is taken so that the load settles securely to the bottom.
A section of fishing line is pulled ashore where the leashes will be attached. Above it, a loop is made on the fishing line, which clings to a specially installed slingshot, so that there is free access to all leashes.
The leashes are hung, the bait is attached, and the line is carefully released into the water.
Excess fishing line is wound on a reel, which is attached to a pre-driven peg.
All that remains is to attach a guard (a bell or other bite alarm) and wait.
If casting is carried out from a boat, the current of the river must also be taken into account. Sometimes it makes sense to lay out the tackle along the shore, against the flow of the water, in order to start the boat ride from there, and in the right place lower the load with the buoy to the bottom.
If you plan to fish at shallow depths in the summer, you can wade the load.

These are the general rules for throwing a rubber band. But the process of catching a particular fish can vary significantly.

Pike perch on a spinning rod - a guide to choosing tackle, baits and a story about the technique of catching a deep-sea fanged hunter.
The best fishing knot - it does not come undone, does not reduce the strength of the connection and does not move, learn how to knit a figure eight correctly.
How to prepare bait for bream - the best recipe, list of preferred ingredients and flavors.

Catching sabrefish with an elastic band

Chekhon is the most popular fish that can be caught without a rubber band.
The rubber band seems to be specially created for catching sabrefish - it is this tackle that allows you to get the richest catch. The best time to catch this fish is from May to September. She loves shallow rocky or sandy sections of the river, usually walking in schools, closer to the surface of the water.

Lure

A mixture of breadcrumbs and millet porridge (1 to 1) is good for baiting sabrefish. The finished cooked mixture is placed in a feeder made of fine mesh. It is installed at a distance of 5-6 meters from the location of the hooks upstream. It is tied to a buoy at the surface of the water and secured at the bottom with a weight.
You can also use a plastic bottle with frequently made holes, and even uncooked millet groats or breadcrumbs as bait.
The bait is gradually washed away by the water and goes downstream, thereby attracting shoals of sabrefish to the fishing spot.

Bait and fishing technique

The best option for sabrefish is maggots, 4-5 pieces per hook. Closer to autumn you can use fry.
The bait should be located closer to the surface of the water, so be sure to install a float between the elastic band and the area with the leashes. It can be a foam ball with a diameter of about 5 cm, or a hollow factory one with good buoyancy.
The saberfish reacts more actively to moving bait, so it is necessary to “play” with it. The line is held in the hand, a sharp jerk is made, then smoothly released into the water until it stops. Pause for about 3-4 seconds, and the cycle repeats. Sometimes you can add variety to the game by changing the frequency and duration of jerks.

How to catch crucian carp with an elastic band

Crucian carp, especially small ones, go very well on elastic bands

This is perhaps the most uncomplicated type of fishing. Crucian carp loves everything, and you can use bread, hominy, worms, maggots, and bloodworms as bait.
The most important thing is to feed the fishing spot well, and in a well-chosen area (and crucian carp can be found everywhere) you will not be left without a catch. This fish loves fragrant baits, so the best option would be to use pureed sunflower, flax or hemp seeds in their composition.
To make fishing more effective, you can put feeder spring feeders filled with bait on the fishing line between the leashes. The rubber band is released into place and shaken vigorously so that the nutritional mixture comes out of the feeders. This procedure is repeated 2-3 times. As a result, a well-fed fishing zone is formed exactly in the place where the crucian carp will be waiting for bait on the hooks.

Catching bream with an elastic band

Bream is a large schooling fish, which makes it possible to successfully catch it with a rubber band.
All fishermen know how shy and cautious the bream is. If any technical liquid gets on the tackle, it is better not to use it - you won’t get a bite. So the gum should always be kept perfectly clean.

What are the features of bream fishing?

Lure

Without this, bream cannot be caught. We recommend not using store-bought mixtures as food, but steaming peas. For one bottom fishing rod, about 2 kg, boiled over low heat for 10 minutes, will be enough.

The bait should be scattered over the place where the bait is installed at least one and a half to two hours before the intended fishing. To determine exactly how the hooks will be positioned on the bottom, it is recommended to attach pieces of foam plastic to them and test the fishing line into the water. This way you can clearly see how the fishing line is positioned on the bottom, taking into account the underwater current. The fertilizer is scattered along this trajectory.

Bait

Bream is a fairly omnivorous fish, but the best option, of course, is medium-sized dung red worms. 5-6 worms are hung on a hook (No. 4-6), the tip is always hidden.
The leash for bream is usually made 20-25 cm from 0.2-0.25 mm fishing line. The optimal number of hooks is up to 5 pcs.

Catching

Waiting for bream bites in the daytime is almost pointless. Its time is early in the morning, at dawn, or after 6-7 pm. If you stubbornly plant worms throughout the day, small things will annoy you and are not worth your attention.
It is difficult to confuse the bite of a bream with another - at first the guard moves slightly back, and then confidently moves forward by 15-20 centimeters. Now you can hook, and, most importantly, do not let the bream go towards dense thickets. The elastic band will help absorb strong jerks. All that remains is to carefully lead it to a place where it can be picked up with a landing net, or to the shallows, where it will lie on its side.

It is obvious that a well-designed bottom fishing rod with an elastic band in the hands of a skilled fisherman turns into a universal tool. And what is also important, fishing with an elastic band can allow you to be distracted by other, more active types of fishing.

primanki.com

What does the tackle consist of?

The main advantages of elastic fishing are the compactness of the tackle, but at the same time its ability to cover a fairly large area of the reservoir.

Here you can find out what the difference is between bream and white bream.

Its design assumes the presence of such elements as:

Good stretchy elastic band. It is desirable that it has a round cross-section, a thickness of at least 0.5 mm and can be stretched 5 times.
Carabiners for fastening elements.
Line with a diameter of 0.4 mm.
Reel.
Cargo. When choosing this piece of gear, it is important to consider how far you are going to cast and balance this with the strength of the rubber. You also need to take into account the flow of water. If you fish in a calm body of water, for example, on a lake, you can take a load weighing about 250 g - this is quite enough. When you plan to fish with an elastic band in the river, it is better to take a more powerful “anchor”. Often fishermen use ordinary bricks for this purpose.
Leashes with hooks. Leashes can be made from strong fishing line. Their length should be about 25 cm. Hooks are needed No. 6.

Selecting a rubber shock absorber

The rubber must be combined with the main fishing line . To do this, you need to take into account the approximate weight of the fish found in the reservoir. For example, for catching crucian carp there is no point in taking a thick fishing line; up to 0.3 mm in diameter is quite suitable.

For bream, the diameter of the fishing line must be at least 0.5 mm, and the leaders must be at least 0.3 mm thick.

When choosing the length of the rubber band, you should take into account the casting distance and stretch of the rubber. Approximately 20m will be required if you have 60m of fishing line, so that you can freely tie sinkers to the ends of the elastic band, as well as hooks on the loop inserts.

Nozzles

In their natural habitat, the diet of bream consists of food of plant or animal origin. The first category includes water algae, white rush roots, and the second category includes worms, insects and their larvae, and eggs of other fish (perch, pike). Based on this, you should also choose a nozzle for fishing with an elastic band.

The diet of bream is also affected by the time of year. It feeds especially actively, without going over food, in the spring and from the end of August to November, and in the summer it is more capricious. For example, when it comes to winter, one of the favorite delicacies of bream is stale rye bread, grated with moldy cheese or garlic.

Important! The colder the water in the reservoir, the more often bream prefers bait of animal origin. In warm waters, it prefers plant foods.

If we talk about baits of animal origin, then, according to fishermen, most of all the fish prefer “sandwiches” made from maggots and casters. You can also fish with dung worms, flies, and larvae. It is necessary to take into account that there are baits that can be used to catch any fish. For example, if you string a dung worm or maggot onto your hooks, it is possible that instead of bream you will catch roach or silver bream.

It’s better to put on several of these baits, then small fish won’t grab them, but catching a large specimen, even if it’s a crucian carp, is also nice. Sometimes fishermen tie bloodworms in bunches, which also attracts fish. Slugs, crustaceans, and beetles are also suitable.

When it comes to choosing vegetable baits, the best treat for bream is canned corn. Moreover, fishermen often resort to this trick: they put grains not on hooks, but on hair, and on top they add a ball of polystyrene foam, painted yellow. This is done so that the bait does not sink to the very bottom, but attractively floats above it, luring fish.

Here you can read about how to cook stuffed bream in the oven.

A variety of porridges (millet, pearl barley) of such a consistency that they can be placed on a hook are also used as vegetable baits. Often fishermen cook pea porridge, which is then mixed with dough and flavorings are added. Small pellets are formed from the mass, which are placed on hooks. Bream bite well on pieces of Borodino bread fried in sunflower oil.

A good effect is achieved by combining attachments, and the components can belong to the same category (for example, only plant or exclusively animal) or different. The best combinations are maggots and corn or peas. You can also string different types of worms onto the same hook.

Find out also how to deliciously cook bream with potatoes in the oven.

Catching bream with a donkey with a rubber shock absorber

For successful fishing, you need to know well the features of the chosen reservoir and the bottom in the fishing area. The bottom should be relatively clean; the presence of silt at the bottom is highly desirable.

Boiled peas are most often used as complementary food, of which there should be a sufficient amount. Feeding is best done the day before fishing.

The cargo is transported into the reservoir using a boat. In its absence, the cargo can be delivered by swimming. Finally, it can be simply cast using a rope tied to a weight like a sling, but this is the most undesirable method.

If a fisherman fishes alone, then the load is brought into the boat along with the elastic, then the elastic is delivered to the shore, where it is tied to the tackle. Having an assistant simplifies the task, since he can monitor the elastic band when bringing in the load and unwind the reel or spool of fishing line.

A strong stick with a split at the end is installed on the shore, which will serve as a fixation for the gear when changing bait or removing the catch from the hook. You can also store abandoned gear in it.

You should not tighten the elastic too much, because in this case, when fishing, you can move the load out of place or break the shock absorber. Also, you should not loosen the rubber too much, since in this case the hooks may move far from the feeding area.

You need to tie pieces of foam plastic (about 2x2 cm) to the first and last hook, which will show the exact location of the feeding. Feeding is carried out from a boat or by throwing balls of bait into the fishing area from the shore. The first method is preferable, as it is more accurate and effective.

After the bait has been delivered to the fishing point, you can remove the hooks from the water, remove the foam from the hooks, attach the bait and begin fishing directly.

A bunch of dung worms is most often used as bait, but other baits can also be used, depending on the characteristics of the reservoir.

In order for elastic band fishing for bream to be successful, you need to follow a few simple conditions:

the bait must be fresh and of high quality;
hooks must be delivered exactly to the baited place;
you need to catch the fish quickly, but without fussing; it is advisable to use a landing net;
When returning the hooks to the water, do this carefully and carefully to prevent the appearance of a “beard”.

Source: orybalke.com

Lure

Experienced fishermen know that bream loves to eat. To attract it and keep the flock in place, you will need a lot of bait. It is advisable to have several types of food with you, since fish, depending on the conditions of the reservoir and the predominance of natural food in it, have certain preferences. Stores offer a wide variety of food, but more often fishermen tend to cook it themselves, improvising with ingredients and flavors.

The bait should include foods that bream loves. At the same time, they must be well mixed into a single whole. The required ingredients are: cake (pressed sunflower seeds), bread crumbs, as well as binding components such as wheat flour, clay, dry ground peas, etc.

Important! You should not include small dusty components in the bait, which will create turbidity in the water, attracting small fish,

—
so you are unlikely to be able to catch a large specimen
.

There are many recipes for preparing bait. For example, for fishing in still water conditions, you can prepare a mixture of the following components:

cake: 200 g;
bread crumbs: 300 g;
bran: 300 g;
boiled millet: 300 g;
dry clay (crushed): as much as needed for viscosity;
coriander: 2/3 tsp.

The flavoring agent in this case is coriander. It can be replaced with analogues such as caraway seeds and dill. Liquid commercial aromatic additives are often used. The scent of apricot, vanilla, and banana is suitable for bream. When making bait for river fishing, peas are often added to its composition.

We offer you information on how to bake whole bream in the oven in foil.

For example, you can use the following recipe:

sunflower cake: 200 g;
breadcrumbs: 150 g;
sprouted peas: 200 g;
boiled oatmeal: 200 g;
flavoring;
dry clay for viscosity.

Now, specifically, a little about the bait for the rubber donkey

Many people add ground flaxseed to it and this technique is quite effective. But the main positive property of flax is not only its attractiveness to bream. Ground flax, like ground hemp, separates the remaining components of the bait into small particles, which is very important in standing water, especially if the food is too viscous. Bream doesn’t really like cannabis, unless it’s boiled. If there is no flax, you can use ground coconut flakes for the same purpose, which bream also really like. Nowadays, coconut flakes are common in any grocery store.

Many lake fishermen, including me, have a wary attitude towards modern industrial flavorings (bite activators). These synthetic “stinkers” are good at collecting small fish, especially in warm summer water, but for large bream, especially in a natural lake, it is better to use natural natural odors emanating from natural products. Roasted, ground peanuts, corn and steamed peas are good. If it is possible to get cornmeal somewhere, then do not forget that this effective thing is part of the best industrial bream bait mixtures. But, to be honest, by paying a lot of attention to our vegetable porridges and excluding the animal component from the composition of the bait, we quite significantly reduce our chances of success throughout the entire fishing. If the dung worm is quite rightly considered the best bait on most lakes, then it will also be indispensable in groundbait. It is very good to lower a couple of dozen selected live dung beetles to the bottom with the main bait. And if it is possible to use even more worms, then it will be even better. Of course, the worms will quickly burrow into the bottom soil, but this is good, since in this case they will become inaccessible to small fish. But when a flock of large bream approaches the point, it is the dung worm, which believes that it is well hidden, that will be the main attracting factor for the bream, which, with its “trunk”, like a vacuum cleaner, thoroughly shovels the bottom soil. The fish will begin to swarm in the ground, raising turbidity, which perfectly camouflages both leashes with hooks and the main fishing line.

Fishing technique and tactics

For fishing to be successful, it is important to know the behavioral characteristics of bream, which is a rather capricious fish. The time of year and weather conditions play an important role. The fish feeds especially actively in the evening and at night. During the day, large specimens go deeper, so catching them is much more difficult. The daytime bite is good in cloudy weather, especially if there is warm rain and a slight breeze. On the eve of strong thunderstorms and changes in pressure, fishing will not bring success.

Did you know? At night and early in the morning, the presence of bream can be determined by the characteristic smacking sound that the fish makes when feeding.
Fishing techniques and tactics differ depending on whether you fish from the shore or from a boat. But in any case, the bream bite has its own characteristics; it is difficult to confuse it with other fish. When the fish feeds, the guard begins to shudder, and then moves back a few centimeters, after which it slowly moves forward 10–15 centimeters without stopping. If the tackle behaves this way, you can be sure that it was a bream that bit. Now you need to make a sweeping hook, and then start fishing. The tackle is taken out slowly, evenly sorting out the fishing line.

From the shore

When starting to cast, you need to completely unwind the tackle and lay it out in a spiral on the shore. There should be no vegetation or stones nearby that the equipment could get caught on during casting. The reel can be held in your free hand or securely attached to a peg. Standing sideways to the unfolded tackle, you need to forcefully throw the load into a previously chosen place.

Now you need to wait a few minutes so that the end of the tackle lies exactly on the bottom. Now you can drag a section of fishing line to the shore where the leashes will be attached. The tackle is finally mounted, the bait is installed, and the fishing line is carefully immersed in the water. Now all that remains is to attach the bell (guard) and wait.

Find out also how to cook bream in sour cream.

If you don't have a boat, baiting may be a problem when fishing from the shore. In this case, you can use a regular plastic bottle. It is cut in half to make something like a boat. The feeder is tied to the tackle between the main fishing line and an elastic band (the leash part is still unfastened).

The advantage of this method is that the bait will be delivered exactly to the place where the hooks will then be located.

A little bait is placed in a bottle and put into the water. When the tackle is completely immersed, it must be shaken several times so that the food completely leaves the feeder. Now you can remove it and put the fishing line and leads in place.

When taking out the catch, the fisherman stands on the shore with his side to the water, folding the gear in rings under his feet. It is important not to let the fish go to the side, into the reeds at this moment, and to extinguish its jerks in time. The leash cannot be allowed to rise above the water, so the tackle is lightly pressed. When the fish is close to the shore, you can remove it with a landing net or put it aground - when it touches the shore, the bream turns over on its side and freezes for a minute. At this time, you can pick it up with your hands and send it to the cage.

Video: Fishing with an elastic band from the shore

From the boat

When fishing from a boat, the process of casting gear is greatly simplified, since it is possible to place the load exactly in the desired place. It also makes it easier to introduce bait. The boat is placed on two anchors for reliability. During such fishing, it is very important to remain quiet, since bream is a shy fish, and the slightest splash of water will force it to look for another place to feed.

You may be interested in information on how to dry bream at home.

To fish from a boat, you need to get a meter-long stick, with which you can move the line away from the sides. Also, take care of purchasing a landing net in advance, since the bream is quite active and can fall off the hook when climbing on board.

On the current

It is better to catch bream in calm water. However, if you have no other choice but to catch it in a river with a current, you need to know some tricks. It is better to cast the tackle from a boat. To do this, equipment is laid out on the shore against the flow of water.

From there the swim begins, and when the boat reaches the desired place, the load is dropped. If you are throwing a load from the shore, also take into account the strength of the current, which will carry it several meters until it sinks to the bottom.

We suggest you familiarize yourself with how to cook bream soup.

Preparing tackle for catching bream with an elastic band

When catching this fish, you need to remember that this fish is very shy. Any sharp sound can scare her. Therefore, a fisherman, going to catch it, must take into account this feature. Not only a loud sound (such as a knock), but also the ordinary sound of human steps can scare away fish.

Therefore, if you are counting on a good catch, try to behave as quietly and inconspicuously as possible.

The caution of this fish also influences the choice of habitat. Bream does not like open space. He prefers to live where he has a high chance of remaining unnoticed. One of its favorite habitats is a place where there is a lot of reeds.

If you fish in places where this fish feels comfortable, its vigilance will be significantly reduced.

If a bream is caught on a hook, you need to be very careful. If you try to pull it out right away, it may end in failure . Bream is a strong fish and if it starts to fight, it can easily drag the tackle to depth. If a fish is caught on a hook, do not pull it sharply. on the contrary, you need to loosen the line and pull out the bream with a landing net.

Fishing with rubber bands is usually in places where there is no current or it is quite weak. However, if it is used in places where there is a current, it can sometimes show unexpectedly good results.

One of the features of this fishing method is that, due to the use of an elastic band, the fisherman can pull the fish that has bitten onto the shore, and then return the tackle to exactly the same place.

Selecting a rubber shock absorber

In order to prepare this fishing tackle, you will need to purchase a suitable rubber band. This seems like a simple enough question though. but there are some subtleties here. First, we'll tell you how to choose it when purchasing. Nowadays, manufacturers offer many different options for elastic bands.

Once upon a time, aircraft model rubber was used for these purposes. Now, although there are different options, they use something similar.

When purchasing it, you need to pay attention to its thickness. If it is too massive, it may float up when casting the hook. And this, in turn, will lead to the displacement of fishing gear. It turns out that fishing in this case will not take place where the bait was produced. However, this is not the only requirement.
The elastic should stretch six times. If it cannot do this, then it is not flexible enough and is not suitable for you.
In some cases, when stretched, the elastic band may simply break. There are also types when there is a cavity in the center. This greatly reduces the strength of the elastic.
It is believed that the optimal thickness is one and a half millimeters. In addition, when purchasing, you need to take into account that some types of rubber bands do not have buoyancy at all. They are well suited for this gear.
If you fish in a current, a rubber band that is too thick can be carried away by the water, since it has a high windage.

How much tires should I take?

This tackle has a considerable length. The line can be from 80 to 100 meters long. It all depends on the remoteness of the place you have chosen to catch bream. The elastic band is usually about 20 meters long.

Which weight to choose?

The farthest part of this fishing tackle consists of a weight and a float. They are usually connected with a thick cord, which is tied to a fastening ring. The far edge of the elastic should also be securely attached to this ring.

This weight needs to be made quite heavy, because it bears a significant load when landing fish.

This gear also uses another weight, which serves as a bite alarm. What is it for? Since such gear is usually of considerable length (it can be up to 100 meters away), it will not be so easy to see that the bream has bitten.

In addition, when catching this fish you can achieve significant results at night. In such a situation, it is quite difficult to discern a bite at a great distance. For this, a special weight is used, the weight of which is usually taken no more than 300 grams. It is placed on a fishing line not far from the rod (up to one meter).

Until a bite occurs, it hangs almost perpendicular to the surface of the earth, slightly deviating towards the water. If a bite occurs, it will begin to move, deviating from its original position.

If fishing occurs at night, then you can use a special device that can serve as a bite alarm even when you accidentally doze off in the morning. This device looks like this.

It is located on a leg (up to 50 centimeters long), which needs to be stuck into the ground between the bite alarm weight and the rest of the gear immersed in the water. The fishing line is placed on top in a special slot.

Such a device performs two functions:

In strong currents or strong crosswinds, the indicator may move laterally. This may cause a false bite signal. The fact that the fishing line in this case is placed in a special slot will prevent such a situation.
In the event that the fisherman is overcome by drowsiness or falls asleep, and at this time a bite occurs, the device will sense this and emit a piercing sound signal, which will certainly attract the attention of the fisherman. The volume of such a signal can be adjusted to the most convenient level. It should be taken into account that at the maximum volume level this signal is very strong.

How to make a rubber band for catching bream?

On the one hand, this tackle looks quite complicated, but it is quite possible to make it. First, let's tell you how this gear works.

In this figure, all the constituent elements of this gear are clearly visible:

Here we mean a fishing rod.
The main fishing line is attached to the fishing rod. This part of the tackle has the greatest length compared to other parts.
This is the working part of the gear. Usually it is a piece of fishing line with several leads. The picture shows two of them, but some fishermen use five or six leaders. Their length is taken to be approximately 10 centimeters. They are usually located at a distance of 50 to 100 centimeters from each other. In the area of the outer leashes, a small piece of foam is usually attached. Why is this being done? The location of these floats and the float, which is attached to the distant weight, will tell the fisherman about where the working part of this gear is located. This can be especially important if there is a current. Having seen the gear shift, the fisherman has the opportunity to correct the situation.
This number shows the attachment of the leashes. It is usually done as follows. A bead is placed there, to which a leash is attached. It is limited on both sides by small beads with narrow holes that sit tightly on the fishing line. These beads, in turn, are limited by knots on the fishing line. This is done in order to avoid the leash from twisting around the fishing line.
Leashes.
Hooks are usually chosen in size 6 . Usually, cambrics are placed on the fishing line next to the leads. This is convenient for storing such gear. In this case, the tip of the hook is threaded into the cambric and during storage it will not be able to scratch anything.
This, in fact, is the elastic band that gave this tackle its name. Its length is usually about 20 meters. Its use allows you to pull out the fish, then return the tackle to its place. This creates significant mechanical stress on the spinning reel. Therefore, you need to take a durable reel. Usually they take one whose diameter is equal to the size of the palm or slightly smaller.
This is a weight . It comes across as powerful and quite heavy. An elastic band is attached to it. Another weight (bite alarm) is located next to the rod (at a distance of 50 - 100 centimeters). It is relatively small, usually weighing up to 300 grams.
These are fasteners with a clasp . They are located on both sides of the working part of this gear. The latches are connected to the loops of the main fishing line and elastic band. The elastic loop should be reinforced with cambric for strength.

Features of fishing at night

At night, bream emerges from the depths and moves to smaller coastal areas to feed. You should look for its flocks in a clear area, not overgrown with sedges, reeds and other grass. Night fishing is more effective, since at this time of day bream becomes especially active in search of food. If you manage to spot one of the fish's favorite trails, there is a chance of making a nice catch.

The gear is cast in the evening. Usually a bell is used as a bite alarm, but at night it is better to replace it with a luminous guard, unless, of course, you are going to lie down for a nap. Otherwise, night fishing is no different from daytime fishing. When you hear or see a bite signal, you need to hook and start fishing.

What baits are used for catching bream?

In summer, nozzles can be varied. If we are talking about animal delicacies, then these can be larvae, flies or worms. In hot weather, it is advisable to cook greens, dough or some kind of porridge. If the choice of food in the river is small, then the bream can feast on what is prepared for it. If these are fed specimens, then in this case it will be a little more difficult.

Many fishermen know that fish very often dig all sorts of holes at the bottom in order to fish out mollusks or worms from there. And if so, then such baits can be safely used to attract fish into your nets.

When catching bream on a bottom, they often resort to tying bloodworms into a large bunch and throwing them into the water. Slugs, crustaceans, subfoliates or worms are also suitable in this case. If such food seems too “greasy”, then the most delicious things can be added to porridge or dough. This way you can save money and attract fish to yourself.

At the end of summer, bream also bite well on beetles, larvae, maggots, ant eggs, bark beetles and the like. They also like porridge: wheat or pearl barley, which can be put on a hook.

Experienced people have noted that with the arrival of autumn, fish swim perfectly to stale rye bread, which has been rubbed with garlic, or cheese, on which mold has already appeared.

You can also try using boiled pea porridge, mixed with dough and looking like small pellets. By adding some natural flavors to them, it will be possible to attract even large bream.

Source: IaRybak.ru

How to make an elastic band for catching bream yourself?

To make an elastic band for catching bream on your own, the fisherman should prepare in advance several hooks, a sinker, thirty meters of fishing line, about ten to twenty meters of elastic, and you will need a reel.

And then you should strictly follow the list of actions below:

– you should take a nylon thread and string a sinker on it;
– we knit this thread itself in a fishing line, securing it to a couple of strong knots;
– we take a fishing line and attach it to an elastic band, and the fishing line needs to be taken three times more than the elastic band itself;
– and it will be necessary to make the number of loops, how many leashes you will have on this tackle, approximately in
every meter.

To make leashes, we take a fishing line, attach a hook to one end of it and hook the other end to a loop on the tackle. We attach all the tackle to the reel. The elastic band itself should be wound onto the reel very evenly.

Types of donki

Bottom tackle has been around for a long time and remains popular among fishermen. Only the material from which the fishing rods were made changed. Now there are two types:

Donka-elastic band. Which is perfect for catching bream, crucian carp and perch, as well as other fish. For this kind of fishing, it is enough to throw the tackle into the water once, and then fish without removing all the rubber from the water. The advantages include a large catch, thanks to the number of hooks, but the disadvantages are that it will be problematic to pull out the tackle intact.
Donka-trick. It is used on large bodies of water, as it allows you to throw the tackle far, however, creating such a device will require a considerable amount of financial investment.

Thus, catching bream with an elastic band is the best option, so we’ll consider it.

How to assemble an elastic band with your own hands?

Most often, experienced fishermen prefer to assemble their gear with their own hands, so that in the future they can adjust it based on the fishing results. To assemble your own bottom tackle you will need the following materials:

a reel with monofilament line 0.33 mm, 50–100 m long;
aircraft modeling elastic for 5–10 m;
another 20-meter reel with a line thickness of 0.2 mm;
several hooks numbered 8–10;
bell with additional fastening.

All the tackle for bream is located on the reel; fishermen most often do not use a purchased element, but an ordinary piece of plywood or board. It is worth considering the option of securing the reel to the shore. And also prepare a weight, which can be any heavy object, for example, a hammer.

Useful tips

In addition to the basics in catching bream with an elastic band, it is very important to take into account the following useful tips from experienced fishermen:

To fish with a rubber band, you should thoroughly clean the shore of various debris.
It is undesirable to use bricks, pipe fragments and other heavy objects as sinkers, which, after fishing, are likely to be torn from the equipment and left on the bottom.
The gum is stored on a wooden reel in a dry and cool place.
To search for promising places, use boat echo sounders or a feeder rod with a marker sinker.
It’s better to fish with a rubber band with a partner - it’s easier for two people to lay out and prepare gear, bring weights on a boat to the fishing point, and throw bait.
In windy weather and strong currents, it is better to use a thin braided cord as the main fishing line.

Fishing for bream with an elastic band has been forgotten in vain; this tackle option allows you to catch trophy fish in a simple way at minimal cost.