Catching bleak: summer and winter


Bleak can be used for live bait fishing, and due to its high fat content, it has a unique taste when fried or dried. Bleak fishing is most popular in March, April, May, and June, and the best tackle for such fishing is a float rod.

In this article you will learn how the tackle should be structured, which rod to choose for the best bleak fishing in spring and early summer, and you will also be able to watch a video of the fishing process.

Where to catch bleak

In search of food, the fish roams throughout the entire reservoir, so there are no difficulties in choosing a place to catch it; you only need convenient access to the water section.

plant thickets , preferring clean, open water. Natural timidity forces it on windless days not to approach the coastline closer than ten to fifteen meters, unless spawning has begun. During currents or during strong winds, waves create a certain safety, and a school of fish approaches the shoreline within the distance of a fishing rod.

For spring bleak fishing, small shallow waters and coastal places with a depth of no more than three meters, open to sunlight, are recommended.

How and what to catch bleak in the spring?

Bleak is a small and extremely common fish, found in most reservoirs of the country. Belongs to the carp family. Its adult, large specimens reach a weight of 100 g, and a body length of 20 cm. Mostly you have to be content with specimens that are half the weight with a body length of 15 cm. Often the bleak is called the high water, which many fishermen do not like so much when hunting for large fish, because small things make false bites. Catching bleak with fly fishing, with a feeder, on a screen, on a float tackle is interesting because of the good bite of the fish and the possibility of using it as a bait.

Bleak behavior in spring

In the spring season, before the start of spawning, the fish begin to eat.
The bleak seeks to gain strength after winter in preparation for this event. During this period, both small fish and individuals that have managed to spawn can bite. With the beginning of March, bleak begins to actively take an interest in any bait. If the ice is strong enough, fishing begins there.

April for fishing is characterized by the fact that you have to look for a good place. This is done quickly, since bleak is characterized by noisy behavior, and its feeding places are easy to determine. From the first days of this month, bleak is preparing for spawning, which begins after the water warms up to fifteen degrees. Its bite lasts from sunrise until ten o'clock, then its activity decreases sharply, and only in the evening the fish becomes active again.

In May, the daily increase in water temperature causes the bleak to change tactics and slide down to depths of one and a half meters. But the fish continues to attack the bait greedily and confidently. Fishing in cold regions can continue from June until July.

Features of fishing in spring

If you equip the fishing rod correctly and correctly, then you can catch several dozen fish with it in a short time, giving you great pleasure. It is especially interesting to catch it in the spring, despite the fact that bleak is caught all year round. You can go fishing as soon as the water bodies are free of ice. A successful fishing trip depends on many factors. It is necessary to take into account the behavior of this fish in different periods, and its gastronomic preferences. Along with this, you need to take into account the temperament of the reservoir and properly prepare the gear.

For fishing in the spring, a classic float rod with a blind rig and up to 5 meters in length is suitable. Because the fish is small, it is possible to use a fishing line with a diameter of 0.1 to 0.12 mm. Blind equipment minimizes the number of overlaps and the appearance of knots.

Excellent results can be obtained if fluorocarbon is used. Because it is not visible to the fish in the water, it is possible to take a thicker fishing line. Also, fluorocarbon is harder, so it will have fewer overlaps, perhaps not at all.

If you distribute the pellets along the fishing line, this will largely minimize negative factors. In most cases, in such cases it is permissible to use 2 types of float models: ratite, in the form of a needle, which allows you to catch bleak closer to the surface of the water, and keel, when fishing is carried out at a depth of up to 0.7 meters.

Correct selection and installation of gear

Despite the fact that the gear is quite simple and can be assembled by a novice angler, it is still important to know about some of the subtleties.

Here the shape of the float plays a decisive role. It should be sensitive, so give preference to stick-shaped bite indicators or narrow elongated models. These floats allow you to react to the slightest bites of this small fish. Also, a small narrow float in the form of a stick will not disturb the bleak.

Depending on the conditions in which fishing is carried out, floats of a certain carrying capacity are selected. For fishing in still water, it is enough to have a float with a minimum carrying capacity, but when fishing in a current, the float will need to be selected, increasing the carrying capacity.

A plug or fly rod is suitable for catching bleak. Naturally, any tackle is designed for specific fishing conditions. When catching fish such as bleak, you need to have a fairly light fishing rod, which cannot be said about a plug rod. Since the bites follow each other, the heavy fishing rod will quickly tire your hands.

Alternatively, it is possible to catch bleak by fly fishing, despite the fact that this option is also not very acceptable. Fly fishing is a rather complex piece of equipment that must first be mastered in order to learn how to use it correctly. Also, it is necessary to choose the right unnatural bait and present it correctly. To catch such a small fish, you should not use complex gear, such as fly fishing. Bleak is usually caught on bottom tackle, which is used to catch larger fish, such as crucian carp or crucian carp.

Based on this, the best option is a float tackle designed for fishing from the shore. In most cases, there is no need to cast the bait over a long distance, because the bleak can stay close to the shore. Gear for catching bleak involves the use of small hooks, for which you need to select bait.

Bleak behavior in March

Spring fishing is different in that it is now possible to catch many trophy specimens. But this is provided that the angler knows at the time when the fish begins to bite and on what bait.

Few people know that bleak belongs to the carp family, but at the same time it leads an active lifestyle all year round, compared with some heat-loving relatives. This not huge fish is characterized as:

  • Not shy.
  • Differs in gluttony.
  • Reproduces quickly.

With the arrival of winter, bleak forms a few flocks, which by spring are located at the mouths of rivers, where they actively feed. With the arrival of spring, but at a time when the ice is still strong, it bites perfectly from the ice. To do this, you need to feed the place, after which you can enjoy an intense bite. Along with this, the bleak is interested in any bait, and very actively.

As mentioned above, light, sensitive tackle, with not huge hooks, will be useful. Moreover, similar requirements apply to both summer and winter fishing rods. A winter fishing rod should have a sensitive nod made of special material. Shots made of tin or lead are excellent for rigging because they also play when they fall into the water, luring fish with their play. The fact is that bleak is more interested in bait that is in motion. The following can be used as bait:

  • Bloodworm.
  • Pieces of lard.
  • Maggot.

When placing bait on a hook, the tip must be left slightly open in order to reduce the number of slips. In addition, all sweeps will be effective. It is best to opt for hooks numbered No. 16-20 and fishing line with a thickness of 0.04 to 0.08 mm. You can ignore the color of the hooks and fishing line, but it is better to use a classic white fishing line. As for hooks, it is better to arm yourself not with inexpensive Chinese ones, but with high-quality ones from well-known manufacturers. Chinese hooks are too little sharp, which has been proven by practice. They fail the fisherman at the most inopportune moment.

A fishing rod for catching bleak consists of:

  • From the hook.
  • From fishing line.
  • From the float.
  • From several sinkers.

In addition to the above basic elements, the use of additional elements is acceptable.

Features of equipment for catching bleak

Bleak is a small but very active fish. To catch it, you need equipment that allows the bait to sink smoothly into the water column. Based on this, you need lightweight equipment with a sensitive float, although there are also pitfalls here. Light tackle is not easy to control, much less throw it to the required distance. This is especially true in strong wind conditions. Based on this, any angler feels his fishing rod and equips it so that it is sensitive and, at the same time, the tackle must have beautiful flying characteristics, otherwise troubles are likely.

In the presence of waves, such equipment can cause noticeable drift, which interferes with normal fishing. In order to minimize the influence of waves on the fishing process, it is possible to install another pellet on the fishing line, closer to the rod. It will sink the line, and the drift of the equipment will be small. The mass of the pellet is determined experimentally. It should be minimal and not have a negative impact on the functions of the float.

In spring, fish move to the upper layers of water as they warm up faster. With the arrival of spring, most fish species, especially small fish, move to the shallows to bask in the direct rays of the sun. From time to time you have to catch bleak at a depth of up to 2 meters, but this happens rarely. For the most part, the depth is set to 50 cm and no more. It is extremely important that the float is in an upright position regardless of weather conditions.

Bleak are mostly interested in baits that are in motion. If the bait does not show activity for a long time, then stick it. In order to attract fish, you must invariably drag the tackle, creating the appearance of activity of the bait. You can easily twitch the tip of the rod or re-cast the tackle.

Float rod equipment

The bleak is caught on a fishing rod. You can use light tackle, because the fish are not very large. For instant hooking, the rod test should be as light as possible.

The fishing rod for float fishing is taken as a fly rod. For casting at close and medium distances, rods of 3-4 meters are quite sufficient. The rod should be extremely light, up to 120 grams.


Options for loading a float when catching bleak on a float. 1 heavy pellet or several medium pellets. With a few medium bites, the bite is felt better when fishing in the current.


Floats for catching bleak


Loading and float underwater

The equipment must ensure smooth immersion of the nozzle into the water column. For this reason, the main requirements for it are light weight and sensitivity of the float. You must be prepared for the fact that it is quite difficult to control such tackle when casting to the required distance, especially in windy weather. Therefore, the fisherman must “feel” the fishing rod when equipping it, create excellent flight characteristics, so as not to experience problems when catching bleak.

Video on making float equipment for bleaching:

Float and weight


Variations of “spindle” type floats.
Click to enlarge. The total weight of the equipment should be light and acceptable for weather conditions and the length of the fishing rod. In calm weather, it is recommended to use equipment from 0.5 to 1 g , and in strong winds with a side direction, the weight of the equipment is increased to 2 g .

The float (5-8 cm, about 0.3 grams) is loaded as much as possible, only the small tip of its antenna remains above the surface of the water. Due attention is paid to loading, since the float should sink even with small bites.

The recommended float shape is spindle-shaped . It is better not to use other types with long antennas, since in the spring bleak is mainly caught off the coast.

fishing line

Many people use 0.1 mm fishing line. A thinner one will get tangled, and a thicker one will not allow the use of light equipment. If the bite is weak, it is allowed to use a leash that is thinner than the main line and does not exceed seven centimeters in length. This measure will allow you to instantly distinguish a bite.

Pin Hook from the owner is quite suitable Hook size chart 0.1mm, lb 6, 300m

Hook

For catching bleak in the spring, a hook with an elongated shank and a straight bend is best suited. A hook point that is concave inward will require more time to remove the bleak from the hook, and the fishing rate will decrease. Excessively thin hooks are also not suitable - the percentage of failures increases. Recommended room sizes are 18, 19 and 20.

Lures for catching bleak

Maggot is a classic bait for catching bleak in the spring.
In the spring, maggot works best for catching bleak. It is not only considered tasty for bleaking, but is also more convenient - one large larva can catch at least a dozen fish. To attract bleaks, they use not only white maggots, but also red and even yellow ones.

If the bleak is not biting too actively , use a large bloodworm as bait - it does not fly off the hook for long enough.

If there is no suitable attachment, the bleak is caught on bread crumb or dough. Such baits are bad because the fish eats them quickly or knocks them off completely.

Tackle

To catch this fish you need light tackle. Since the fish bites quite quickly, but accurately, as a result, having a heavy rod, most often the fisherman simply does not have time to hook the fish and it swims away along with the bait. Of course, there are different fishing conditions and sometimes it is simply not possible to reach with a light fishing rod the place where a school of bleak is hiding. Of course, there are no special requirements and you can fish with almost any fishing rod, but most often, a telescopic rod four meters long is used.

The fishing line is used with a thickness of 0.16 millimeters. It is not necessary to use a leash in this gear. However, when hooked, the leash can be of great help and instead of losing half of the fishing line, you can get away with just a broken leash, which can quickly be replaced during fishing. Also, the leash is thinner than the main line, due to which the fish notices it less and is not so careful. For a leash, it is better to use a fishing line with a thickness of 0.12 millimeters. Its length varies from 10 to 30 centimeters, depending on fishing conditions and bottom topography. As a sinker, you can use ordinary lead pellets or sheet lead, having previously cut off the required piece from it.

The float is applied as lightly as possible and loaded as heavily as possible, for better bite visibility. It is advisable to have a bright color on the top of the float. Since the bleak fish is quite small, it is best to use small hooks, for example: number 16 according to the international classification.

Fishing method and process

Bleak is caught using a plug or fly rod, depending on the fishing conditions. If bites are frequent, then the weight of the rod will quickly tire your hands, and the plug version will not be so good.

Some people catch bleak by fly fishing. The gear is quite complex; you need to know how to use it correctly. Bleak can also be found on bottom gear designed for large fish.

Still, the best option is considered to be a float rod for fishing from the shore.

Remember that bleaks are mainly interested in baits that are in motion. If the bait remains inactive for a long time, the fish will ignore it. To attract bleak, you should periodically drag the fishing rod to create the appearance of bait activity. To do this, the tackle is re-cast or lightly twitched with the rod tip.

The bite should be immediate, as the bleak quickly eats the maggot.

Feeding bleak

Fishing begins with scattering bait (two to three handfuls) at the intended fishing points to form an area for bleak accumulation.
As a rule, it forms a circle of half a meter in diameter around the float. The complementary food is scattered with a damp hand so that it does not stick to the palm. The first portion is sent away, the remaining portions are gradually brought closer to you. The scattering is carried out in small portions to create cloudy columns. For warm water, the fishing depth is set to 30-40 centimeters, and in cool weather the fish prefers to stay near the bottom or at half-water. As a rule, the flock approaches within 5–15 minutes, but sometimes active biting begins already from the first cast.

In order for the bleak to more actively take the bait , the frequency of feeding increases - the cloudy column should settle to the bottom slowly. If there is no bite, or the fish activity is weak, change the bait or fishing depth. It is very important to find the level at which the flock stands.

If there is a forced break in fishing , associated, for example, with replacing equipment, you should not interrupt feeding - the school of fish may move to the side. To prevent this, tie a piece of dried bread to a rope and let it float on the surface of the water.


Strawberry flavor is a classic for catching bleak

You can buy bait at the store or prepare it yourself. In the first case, compositions are selected that are intended specifically for bleaking or for other small fish that stay in the upper water layers.

If you decide to prepare
complementary foods with your own hands , there is a fail-safe recipe :

  1. Semolina and bran are mixed in a ratio of 1 to 3.
  2. You can add a small amount of crushed bread crumb to the resulting mass.
  3. For every three liters of complementary food, one glass of milk is poured in to create the necessary turbidity, which attracts bleak.
  4. Soak the resulting porridge with water from a reservoir.

There is a simpler option, suitable for preparing complementary foods directly on the pond - fresh white bread is mixed with sand from the reservoir in which you will be fishing.

About bleak

It is interesting to watch how hundreds of fishermen from the pier “hunt” for this small fish, which most often reaches a length of 10-15 centimeters , although there have been cases when the catch included specimens up to 20 centimeters , but this is more an exception than a pattern.

It's interesting to catch bleak. Not only is this fish a schooling fish, and once caught in a school, you can have great practice in the technique of hooking and retrieving, but under a number of circumstances, it is quite possible to catch a certain number of these fish, which add an excellent taste to any soup. You can also dry the bleak, dry it out and fry it. But most often they catch it for their pets (cats), and for fun. In the spring, the piers are literally packed with fishermen, it seems that there are more fishing rods than there are bleaks.

A couple of tips and tricks

To attract bleak, you should use tasty and aromatic complementary foods. For this purpose, flavorings with subtle odors of fresh fruit . Vanilla and dill oil work great.

To attract fish, use simple methods:

  1. Create splashes on the water. To do this, scoop up water with your palms and throw it onto the float. The flying spray will attract the long-awaited fish:
  2. At the fishing point we create turbidity. A piece of clay or earth is taken from the shore and thrown to the float. The bleak likes the mud, it begins to look for food in it, and your bait is best suited at this moment.
  3. To increase the activity of bleak, it is recommended to use dusty baits that do not contain large pieces. The base should be flour, bran, egg powder and other ingredients. If you have to fish in the current, there is no point in using bait - the mud will be carried away by the current, and at the same time a school of bleak will leave with it.

To make finding fishing spots easier, use the following tips:

  1. If you have to fish in a quiet bay of a river, look for bleak near the shore - this is where its mass feeding occurs;
  2. Check out the shallows along banks that have rip currents. A school of fish stands in the zone of “quiet” water, constantly moving in the direction of the direct and reverse flow of water, looking for food;
  3. At the end of spring, bleak gather in large flocks, choosing feeding places near the water surface. You can find such points by the signs of pike hunting - bleak is included in its diet.

When attaching bait, we leave the tip of the hook a little open - this reduces the number of trips, and hooks are more effective.

Lure

The bait should attract fish: taste and smell, due to which it remains in place for a long time.
There are several ways to feed bleak. Let's look at them in order.

  1. Making splashes of water. You can simply scoop water into your hand and drop it onto the float. Splashes and splashes attract bleak.
  2. Creating turbidity around the float. Take clay or soil from the shore and leave it to the float. Bleak loves mud, it looks for bait in it. This is where you offer your hook and bait.
  3. Feeding with surface solid and crumbly food. More on this later.

Recipe for crumbly fine groundbait:

  • For bait you will need bran and crackers, preferably bread crumbs.
  • Grind them and mix 1:1. It is good to add a flavor with a light fruity smell to the fertilizer: strawberry, pear, vanilla or dill oil.
  • Before starting fishing, add a little water to this mixture, mix everything thoroughly, now it is easy to throw it at the fishing point, it will sink very slowly and attract surface bleak.

In cold water, you can add bloodworms to the bait and catch them with it.

A simple crust of bread can act as a purely superficial solid bait. The main thing is not to throw in too large a piece; a piece the size of a chicken egg is enough. The fact is that the fish eat it for a very long time, and if the piece is too large, it will begin to turn sour in the water, which will have a bad effect on the environment.

About how to fish with a bombard - spinning equipment for catching white fish with artificial and animal baits. Catching large bleak at a great distance from the shore.

A guide to choosing a fly rod for bleak fishing.

How to properly place a bloodworm on a hook.

Seasonality of fishing

Verkhovodka has its own behavioral characteristics in each season:

  • catching bleak in winter. Begins on first ice (end of November). Disappears from the catch from December 10-20 and is extremely rare until February 15. It can be caught during a thaw or warm winter. During this period, it lives in sand pits, often adjacent to minnows. Rare and unpredictable bites occur on bait of animal origin. At the end of winter, it begins to emerge from the pits and heads to the river bank, where the water is enriched with oxygen;
  • spring bleak fishing. It is quite effective to catch bleak in the spring from the ice, where the fish continue to be due to the availability of food and oxygen. Maggot and jig show their best performance in March. In early spring, it is more often found on small rivers that melt faster; the open water hunting season is now opening. It bites well at the end of the month and the first half of April on bloodworms and maggots in the middle layer of water. Before spawning, the feeding season begins; the chances of catching large prey during this period are greatest. Fishing for bleak in May is effective during spawning; surface baits are already used, but the bite is unstable;
  • summer. It bites on food of any origin, the best bites are observed in the evening and morning. In July, it becomes more careful due to the abundance of natural food in the reservoir. It is important to have several baits with you, as the fish may refuse to take the prepared bait;
  • autumn bleak fishing. In September, a good catch continues on sunny days at mid-water; in bad weather the bite stops. Reacts exclusively to animal baits. In October, it begins to occupy wintering pits; it is advisable to use donks with bloodworms and maggots. In November, during freeze-up, the bite disappears or worsens greatly.

Read more

How to catch pike perch in winter using hooks?


Autumn bleak fishing continues on sunny days

Choosing bait and bait for fishing

The perch is not a very picky fish when it comes to choosing bait. Caught using natural and specific baits:


When it comes to choosing bait, the perch is not a very picky fish.

  • catching bleak on wheat is effective in the summer, especially if there are meadows nearby;
  • maggot is the best bait for catching bleak in the spring, especially if it is present in the reservoir;
  • bloodworms and small worms are catchy baits for catching bleak in winter;
  • catching bleak on foam rubber with animal or plant aromas is effective all year round;
  • at the end of spring, catching bleak with a fly performs well, its active use continues from spring to autumn;
  • In hot weather it is good to catch using semolina, dough, white bread.

Tactics and fishing techniques

Fishing highlights:

  • catching bleak in the current with float gear and retrieving becomes more difficult; bottom rigs perform well;
  • Catching bleak on a spinning rod is effective with the help of dry flies; they are thrown into the water and a smooth or stepped retrieve is performed. The fish swims to the place where the prey falls almost immediately, but bites at about the tenth second;
  • The main methods of catching bleak in the spring using float gear are in the retrieve or in mid-water. In early spring, bombard and jig are effective;
  • It’s good to cast flies against the current, in places where the water flow slows down.

What time does it bite?

Bream loves cool weather. The preferred feeding time is night or early pre-dawn morning. It is at this time that the fish swim into shallow water and worry less about safety. After dawn, bream huddle deeper and take a passive position.

In cold weather, bream can go out in search of food even during the day. However, in the fall, due to biological characteristics, this fish remains at depth almost all the time, so it is better to fish this season on a feeder or from a boat. It is worth highlighting separately that windy weather drives fish to the surf, which is rich in food washed out of the ground.

in spring

In March, a jig is used to catch bream. It is better to fish early in the morning, a couple of hours after sunrise. Alternatively, you can fish successfully at night, until about 4 am. For such fishing you need a winter float rod, and the ideal choice of place would be holes at the bottom of the reservoir. The recommended attachment is a bloodworm.

In April, fishing is best on the edges located next to shallow water. Plug tackle is ideal for April fishing. The bait is a worm or maggot. Feeding is necessary, but should be moderate. Don’t forget, your bait should also be present in the bait. Flavorings must be strictly dosed due to the low water temperature.

In May, bream spawns, which means you need to look for it in backwaters and oxbow lakes, rich in aquatic vegetation. When it comes to gear, it is better to give preference to plug and match, and the bait becomes more varied. In addition to worms and bloodworms, bream begins to actively bite on corn, pearl barley and other vegetable baits.

You can add more flavors to the bait and fill it with cake, ground seeds and peas. Bream spawn in the following order: first the medium-sized individuals, then the large ones, and finally the smallest. Estimate your catch based on these considerations.

In summer

In June, bream enters a period characterized by living close to the spawning site. After some time, it moves closer to the holes and depressions. Bream starts searching for food at dusk, gradually moving from the edges to the shallows closer to night. Cold weather can encourage bream to come out in the middle of the day.

Both plug and fly fishing rods or Bologna fishing rods are suitable as tackle. Complementary foods should be dosed and given little by little, in small portions. You can increase the amount of flavorings, because the water temperature is much higher in spring. Plant foods begin to prevail in the bream's diet; corn or new potatoes can be used as bait.

In July, bream, under the influence of temperature, reduces its activity and hides from the heat in pits. Feeding begins only when the temperature drops in the evening. The ideal time for fishing in July is early in the morning; deep holes near shallow water are preferable as a place. Evening fishing will give less results.

The best ingredients are still herbal elements, such as mastyrka or peas. You can use a compilation of maggots with bloodworms. The bait is predominantly vegetable.

In August, bream switches to active night feeding. It is advisable to choose the edges of holes or deep bays rich in vegetation as places for fishing. Any type of fishing rod can still be used. The baits are vegetable, and the bream may also be interested in a worm, as it is gradually preparing for the autumn period.

Read Fishing for crucian carp with a spring

in autumn

In September, bream concentrate on feeding and are actively preparing for wintering. Preferred fishing spots are near holes and shallows rich in vegetation. With the onset of cold weather, the diet of bream changes and instead of plants it switches to living creatures. A worm or maggot is suitable as bait. It is also necessary to add more animal elements to complementary foods, reducing the amount of flavorings. Low water temperatures are not suitable for their active use.

In October, bream rises higher from the bottom to receive more heat from the autumn sun. The average habitat depth during this period can suddenly change into a wintering hole in the event of severe cold weather. The ideal place for fishing is the upper edges of the pits. The preferred time of day is night, and the best bait to choose is animals - worms, bloodworms or maggots.

In November, bream descends to the holes in which they plan to spend the winter. It does not go to the shallows; it prefers to feed there at depth. During this period, you should choose plug gear and fish from 10 a.m. to 1 p.m. Vegetable baits are not suitable for November fishing; you should only take worms or bloodworms.

Proper float loading

A properly loaded float allows you to register the most careful bites. To properly load the float, the fisherman needs to have a weighted set of weights and small pliers.

How to load a float on a pond


A loaded float with the help of two pellets and a backup.
Having a set of lead pellets with you, the angler can quickly equip a fishing rod right on the shore of the reservoir. To load the bite alarm you will need:

  • fasten the sinker at the junction of the leash and the main fishing line;
  • clamp the main part of the sinkers, whose mass is equal to 2/3 of the load-carrying capacity of the float, one meter above the feeder;
  • the rest of the pellets are secured between the sub-frame and the main set of sinkers until only half of the antenna is visible above the water.

If you plan to fish with large baits that have a significant own mass, then the float can be slightly underloaded.

How to load a float at home

At home, a bite alarm is placed in a high container, with a piece of fishing line about 10 cm long attached to its keel. The fisherman sequentially clamps weights of varying weights on a piece of monofilament until the desired position of the float in the water is achieved.

Having loaded the alarm with half of the antenna, the fisherman removes the pellets and installs them on the working equipment. The density of water in a pond may differ from that at home, so you should always have at least 1-2 pellets with you to reload the float.

Read How to properly catch roach on a feeder

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]