How to catch pike perch with a rubber band

When going to a pond with live bait, especially during periods of active hunting by predators, every fisherman can count on an excellent catch. The main thing is to assemble the tackle correctly and know the techniques for catching different types of fish.

The cast is performed once. Using an additional float and weight, we adjust the range and horizon for catching predators - these are just a few of the advantages of this fishing. Properly assembled gear, choice of fishing location and bait with bait - such knowledge will help a novice amateur catch a trophy specimen of pike or pike perch.

Elastic band diagram

Depending on the type and size of the trophies, you will need to make some changes in the thickness of the line, the size of the hooks and the length of the leashes. But the basic scheme of such equipment is the same for all types of bottom fishing rods. It got its name from the inclusion of a piece of rubber in the design.

Large cargo is transported by boat or thrown from the shore. A piece of nylon cord is attached to the sinker. A piece of 1-2 meters is quite enough for casting. Several meters of rubber are attached to the cord. The rubber insert is connected to the main line, on which leashes with hooks are located. All individual sections of the tackle are attached to carabiners.

This is a schematic, brief description of the gear. The main thing is to know how to make this type of gear for predators.

What does it consist of?

The bottom elastic band can have different versions of the equipment.

In the classic version, it includes the following parts:

1. Fishing line (main component).

For pike perch, it is better to use monofilament, with a diameter of 0.4 mm; it is better not to skimp on the length.

1. Leash with hooks (usually several of them - up to 6).

In the case of leashes, the production material should be less strong. This is important for the safety of the equipment, since if there is a snag or a strong jerk, only the hook will be lost. The length of the leashes should be different in order to increase the coverage of the fishing area; the hooks will fall both on a flat bottom and in holes. It is also recommended to attach different hooks to quickly change baits.

1. Rubber shock absorber.

When equipping bottom tackle with a damper, it is extremely important to remember that fishing rubber can expand up to 5 times its original size. This factor determines the length of the installed elastic band. For donkey, it is better to take tackle that is round in diameter.

1. Nylon cord with sinker.

The main task of the load is to hold the gear in one place without the possibility of displacement, the rest - appearance or production material - does not matter. A strong nylon cord (up to 1 m) helps to secure it tightly with the elastic band.

1. Bite detector.

The appearance and origin can be anything - from a plucked twig to a purchased electronic gadget. It is important to perform the main function - monitoring the slightest touch of the prey and giving a signal to the fisherman.

1. Strong thread with float.

This part is installed on the load if fishing is not done from the shore.

1. Reel with rod.

Used for secure storage.

Tackle elements

Any type, be it Astrakhan or classical scheme, is made of several parts:

1. Reel . This part is required for stowing fishing lines and hooks when transporting or storing fishing rods. It can be made from a piece of board, plywood, dense foam or a piece of plastic panel. The main rule is that the entire supply of fishing line must be placed on it and the hooks must be securely fixed. All edges should be smooth so as not to cut the wood.
2. Main forest . The choice of its cross-section depends on the size of future production and water transparency. If you take a thick line, you may not be able to wait for a bite from a cautious predator. But a thin forest will not be able to withstand the jerks of large prey. Therefore, it is important to maintain a balance. For catching small perches, a cross-section of 0.16-0.20 mm will be sufficient. For pike, it is better to set from 0.3 mm.
3. Leash . The choice depends on the size of the trophies and their type. For pike you need to install a steel leash, but for perch a simple line or braided cord will be enough. The minimum number of them on one tackle is 5 pieces.
4. Hook . When catching predators in places with possible obstacles, it is better to use offset hooks. Fishing from the shore or boat will require the installation of leashes with double or triple hooks. The choice of number directly depends on the size of the future trophy.
5. Sinker . Normal conditions for catching predators depend on its size. If you plan to fish on a river with a strong current, multiply the weight of the load several times. It must withstand the load of water pressure and rubber tension while remaining in place. If you take the same sinker for pond fishing and perch fishing, you risk not delivering the tackle to the right place and, in general, tearing off the line when casting. But this rule only applies if you have to fish from the shore. A reliable boat will allow you to carry any cargo over a given distance. In order to remove such a fishing rod, attach a float to the carabiner on the cord on the line. This way, you can easily find the location of the sinker and quickly pull it out without unwinding or stretching meters of rubber when searching for the casting location.
6. Rubber . For equipment, it is better to use round, as it was previously called “aviation” rubber, which can stretch 3-4 times. A rectangular section is not suitable. The sharp, thin edges quickly begin to become damaged and crack under frequent tension.
7. Carbines, swivels . These parts make it easier to install the gear and prevent the leads from twisting.

Making your own tackle is quite simple. Let us examine in detail the manufacture of the basic donkey circuit.

Choosing a promising location

Before installing the gear, it is advisable to measure the depths, determine the coordinates of the dumps and the presence of currents.

During the day, pike perch sits in holes, and at dusk it begins to hunt, moving along the dumps, going out into shallow water. Schools of small fish circle in these places.

For night fishing, you should not choose areas with strong currents or over holes. It is better to place the tackle in calm water, covering shallow water and the drop-off, away from the current.

During the day, the tackle is used on the riverbed, as well as in places where driftwood accumulates. It is advisable to use a shortened elastic band, otherwise the current can greatly stretch it, which is very inconvenient when fishing.

The ideal place on the river for good fishing is a sandy island. It is more convenient to install several rubber bands at once, as well as try other fishing methods.

Classic rubber band, live bait – do it yourself

Let's prepare for work:

• Big load. You can use lead braid from power cables or cast lead weights.
• Round rubber.
• Stock of main scaffolding of the required section.
• 5–6 leashes made of fishing line or steel thread.
• Reel.
• Hooks, carabiners and swivels.

Assembly steps

The work is carried out in several stages:

1. At the 1st end of a meter-long piece of nylon cord we attach a load . In the middle we make a loop for the hand. This way, it will be easier for you to cast the tackle over a long distance.
2. At the 2nd end we attach a carabiner to connect it with a section of the main line . Many people use a direct connection between the weight and the rubber, but this design will quickly come off. The length of the rubber insert depends on the casting distance. If the place is located 20-30 m from the shore, the rubber section should be 10 m or more.
3. We attach a carabiner with a swivel to the end of the rubber . We connect it with a section of the main line, on which loops or carabiners are tied for attaching leashes. Depending on the species of fish or fishing conditions, the thickness and length of the leashes may vary. Every fisherman should have a supply of leashes with different hooks and sizes.
4. We attach the leashes to carabiners or “loop to loop” . We knit spare leashes of different lengths and tie them to the hooks in a figure eight. If possible, it is better to use small carabiners or tie a loop at the end.
5. We fasten the hooks . To do this, we stick them into the body of the donkey. If wood or plastic is used to make the reel, glue pieces of foam plastic to its edges and attach hook tips to them.

Our gear is ready.

Important! For successful fishing, experienced fishermen advise stocking up on fishing rods.

Fishing process

The principle of fishing for pike perch with an elastic band is quite simple and understandable, but requires strict adherence to a step-by-step plan.

• The main gear is prepared on the shore - it is unwound from the reel and laid out.
• A weight is secured to the end of the elastic band with a cord.
• A fishing rod is installed on the shore to attach the signaling device and fishing line.
• The sinker is thrown. If there is no boat or raft with which you can easily deliver the cargo to the required place, you will have to rely on the strength of your own hands and a good eye.
• After placing the load on the fishing line, leashes with hooks are fixed.
• Bait is strung on hooks, and it is better to place live bait on the far baits, and hook lumps of bread, semolina or pearl barley on the nearby baits.
• Slowly release the line until all the floats go under the water.
• Secure the stretched line to the rod.
• It is on the fishing line that you place a bite alarm.

Now, in fact, you just have to wait for the bite.

Don’t rush to pull the line after a bite; experienced fishermen advise waiting a little so that the fish gets tired, and when pulling with active movements and jerks, it can’t tangle the gear with each other, in algae and coastal thickets.

Bottom elastic is in good standing with experienced fishermen; it is an effective and productive tackle. With a competent approach to choosing a place and time of day, providing good complementary feeding, the absence of negative factors (weather, noisy companies nearby), purchasing and using high-quality and tasty bait, even a beginner is guaranteed an abundant catch.

TAGS:

Choosing a place and time of fishing

You can catch large predatory fish with a rubber band, but landing the trophy will be difficult and memorable. To do this, it is important to know the best time, weather conditions, hunting and resting places for predators. Let's try to answer a few basic questions.

Where is the best place to fish?

The choice of fishing spot depends on the type of fish. While pike perch likes to hunt in areas of reservoirs with a sandy or rocky bottom, pike or perch prefer muddy surfaces. On a river or lake, the choice of location can be radically different. Pike prefers places with a steep bank. Her favorite places are small creeks, bays, and snags. But for elastic fishing, it is better to find a point on the border of clear water and thickets of aquatic vegetation.

Pike perch will be attracted to a small bay with calm water or an island in the middle of a large river with a sandy bottom. In any of these places there are sure to be schools of young peaceful fish, hunting for which a predator comes out.

What time of year and day?

There are 2 periods in the year when fishermen forget about all household chores. This is the time of spring feeding, when predators are actively feeding after winter, and you can go fishing at any time. Pike or pike perch approach places of accumulation of peaceful fish that are gaining fat. During this period, the best place for fishing is the confluence of meltwater streams, from which food for prey and oxygen enter the reservoir.

The second time of active fishing is pre-winter. The first drop in temperature causes predators to become more active and begin to gain fat before winter. The time for autumn food is coming. A rubber band for pike or perch allows you to quickly secure an excellent catch and gives pleasure when fishing for a strong opponent.

Summer is the time when fish are caught in the wee hours. The water has cooled, large individuals go hunting, and small ones return from night fishing. If the fisherman manages to find the place where they meet and throw the rubber band at the right time, the result is guaranteed. In general, summer is a time when predators slide into deep holes with cool water and hunt in the rare hours of dawn.

But if there is a sudden drop in temperature, predators try to catch up and become more active.

Influence of weather conditions

Everything is simple here. If a north or east wind blows, it is better for fishermen to stay at home. Powerful southwestern or western winds blow, you can safely go fishing. Strong excitement lifts crustaceans and other food of peaceful fish from the bottom, and it begins to actively move throughout the reservoir. The predator will definitely react to this.

High atmospheric pressure - the fish will be passive and difficult to find. This is due to a decrease in the amount of oxygen in the water. The fish rolls into deep holes with springs and stands there. Catching pike perch with an elastic band will be successful and effective if strong waves push the thermocline away from the shore. Warm water sinks into the depths, followed by schools of small fish. At the depths they will be guarded by fanged predators.

Classic rubber band for catching pike perch

Pike-perch on an elastic band is not a very common occurrence. Catching it with artificial baits is more popular. Classic elastic is classified as a donk with a rubber shock absorber. But most often it works with sabrefish and not as a donkey, but rather as a surface tackle. Chekhon stays in the middle and upper layers of water. But on some ponds this equipment really works like a donkey when catching crucian carp, which burrows in the muddy bottom, getting food for itself. They catch it from the bottom, weighing down the tackle with a sinker, which is not used when catching sabrefish, but rather, the elastic band is equipped with a float.

A donkey with a rubber shock absorber is a rig consisting of 3 parts: a main fishing line about 50-80 m long, about a ten-meter undergrowth on which leashes with hooks are tied, and a piece of durable rubber 10-12 m long. This is the shock absorber. Its length may be longer, but only for quiet water of ponds and lakes. During the current, a shock absorber longer than 12 meters will bend and stretch greatly, losing elasticity and the ability to deliver the bait to the fishing spot.

All three parts are connected to each other with clasps and always swivels, otherwise the elastic band will get tangled. 5-7 leashes with hooks are placed on the undergrowth. To prevent leashes from twisting, they must be tied to triple swivels.

If the bait for catching pike perch is small fish, then the bait for classic gum is worms and maggots. But we will talk about live bait later. For now, let’s focus on the fundamental method of fishing with a regular elastic band.

The first thing an angler does at the beginning of fishing is to bring a load with an attached rubber shock absorber onto the boat. The other end of the rubber is fixed on the shore, on a peg. The load is brought in until the rubber is at a critical tension, about 50 m from the shore, sometimes more if the tires are good. Then, on the shore, the undergrowth and the main line are attached to the shock absorber. The hooks are baited with worms or other bait and the line is carefully released into the water, carried away by the tension of the rubber. The main thing here is not to let go of it abruptly, otherwise the hooks will dig into your hand. When the rubber tension weakens, it means that the hooks with bait have been delivered to the fishing spot. The reel with the main line is secured to the shore. The working part of the fishing line is on a peg. If the elastic band has been loaded, then a bell is hung on the main line or a bell from the feeder is placed on a flexible peg. Focusing on the saber fish, the fishing line is held in the hand, making smooth stretches from time to time, determining the bite with the hand. This is a classic of the genre. Now let’s define what fishing for pike perch with an elastic band .

Source: ribalka-vsem.ru

Fishing. Catching pike perch with a rubber band from the shore video. How to throw a rubber band with a feeder? My fishing. When fishing with an elastic band, there is no need to make noise and scare away the fish by throwing a sinker. It makes it much easier to land fish, since the sinker does not cling to grass and snags. If you catch a large fish, the elastic cushions and prevents the line from breaking. It is easier to re-thread the bait - when baiting, leashes with the hooks do not lie on the ground, but hang on a fishing line stretched with an elastic band. The nozzle is always delivered to the same place. This is especially important when using bait or catching pike perch on an underwater edge. High sensitivity of a bottom fishing rod with a rubber shock absorber. Almost any fish can be caught with an elastic band. The only drawback of a bottom fishing rod with a rubber shock absorber (rubber bands) is the difficulty of preparing for work. An elastic band is a tackle that, as the proverb says, takes a long time to harness, but plows quickly. 1. You unwind the fishing rubber band and fishing line from the reel, lay it on the shore in a zigzag, gradually moving back. It is advisable to unwind the fishing line more than the expected casting distance. 2. Securely attach the reel to a firmly driven peg so that it does not fly into the water when casting. In extreme cases (rocky shore, etc.), hold the reel in your left hand. Tie the weight. 3. Stand to the left of the elastic band with fishing line. Take the load in your right hand. You throw it away. During the current, it is necessary to cast upstream - the load will be carried down. Or cast straight, and then move along the bank downstream. 4. Smoke for 5-10 minutes. During this time, the sinker will settle into the ground and will not move when the elastic band is pulled. 5. At this time, you are looking for two spears. You stick one near the shore and attach a reel to it. The second one is securely stuck at the distance of the segment with the leashes (from the fishing elastic to the loop) deep into the shore. 6. Pull out the elastic, hook the loop to the far spear. Check whether the fishing line is securely fastened and whether the spear will fly out. Otherwise, you risk getting injured by the hooks. If everything is fine, the elastic band will stretch sufficiently and the load will remain in place. Otherwise, pull out the weight on the elastic band and repeat it all over again. If the elastic band breaks, it doesn’t matter, tie on a new weight, and go ahead. In the worst case scenario, if the elastic band breaks in the middle, you will have to tie a new elastic band. There is no point in tying pieces of elastic - it will definitely break in the knot. 7. Hang the leashes, place the nozzle on the hooks. 8. Smoothly, so as not to tangle the leashes, release the fishing line into the water. You should not let go of the line suddenly - the fishing elastic will pull it at high speed, and the leashes will get tangled.. Fishing with an elastic band from the shore video for pike perch

Source: na-sudaka.ru

Every true fisherman wants to catch pike perch. We will tell you about catching this fish using a fishing device such as an elastic band.

The composition of a classic elastic band is as follows: a rubber shock absorber, leashes with hooks, a weight, a swivel and a fishing line.

You can change this standard set of gear, but it will depend on the season, the reservoir and the desired type of fish.

Fishing rod with elastic band

A fishing rod with an elastic band differs from other fishing rods in that the weight is attached to a specially provided part of the elastic band, and not to the fishing line. The elastic tends to stretch, which is why the fisherman does not need to pull out the sinker. He can easily check only the hooks. The same elastic band will help make the jerks made by the predator softer and smoother, and prevent breakdowns.

Advantages and disadvantages

The elastic band has many advantages: - increases the sensitivity of the fishing rod, which allows you to catch completely different fish; — does not require re-throwing the nozzle, which does not disturb either the water or the fish; - the bait is constantly in the same place. True, this technique also has a drawback - the gear is quite difficult to prepare for fishing.

Fishing technique and tactics

For effective fishing, you need to cast to the right place and not lose your gear. It's good if you have a boat. Then the casting issue is easily resolved. We unwind the tackle, go by boat to the desired place and lower the sinker. In this case, in order to easily remove the load from the water, we tie a line with a bright float to it. Now after fishing you can easily find and remove the cargo from the bottom. Successful fishing for pike perch is possible even in urban areas, especially when predators go to spawn.

Let's take a closer look at the fishing technique if the boat is inaccessible to the fisherman:

1. We unwind and carefully place the elastic band and the main line on the ground . In order not to lose the tackle when casting, we unhook the carabiners, lines and leashes in the area between the main conductor and the elastic band and connect these parts directly.
2. Having unwound and laid the line and elastic in a clean place, we take the cord with the load by the loop and throw the donkey to the place you like, or rather, a little further . It is important that after the rubber is loosened, the hooks are on the border of vegetation and clean water.
3. We drive 2 pegs into the soil . One is near the water, and the other is 4–5 meters from it. The second one will be used to secure the tackle when replacing bait and live bait, and the first one will serve as a support for installing a bite alarm. Signaling devices are used in different ways. If we go night fishing, it is better to use a luminous or electronic bell that indicates in the dark which gear has worked. During the day we use a simple bell or a lump of damp soil stuck on the wood.
4. We select the line from the water to the point where it connects with the rubber . Before disconnecting the carabiner, we recommend fixing the elastic band so that it does not go into the water if you move it carelessly.
5. We attach a section of the line with leashes with carabiners, and gradually release the line . When it loosens, we can determine whether the cast is correct. But we are in no hurry to make adjustments. We take the hooks out of the water and attach live bait or bait.
6. Only now can you adjust the casting and finding the hooks. If the leashes do not reach the site a little, we attach a float in the front part of the main line; it increases the range of lowering the hooks to the bottom. If the tackle is thrown with a flight, on the far side, near the last hook, we hook sheet lead. The additional weight lowers the bait exactly to the intended location.
7. Self-made equipment allows you to install the required number of hooks. Right on the pond, by quickly unhooking the leash with a large hook and setting a smaller number, you can catch perch if the pike perch doesn’t want to bite today.
8. We carefully begin to reel in the slack in the line , after we feel a slight tension, we fix the cord on the first peg. We attach the alarm and move on to casting the next tackle.
9. After the bite, we wait for a new series of jerks. We hold the line in our hand and cut smoothly and carefully.

Important! Don't forget to pack an extractor and a reliable yawner in your backpack. This way you will protect your hands from the predator’s teeth and quickly remove the hook from the fish’s mouth.

Techniques and features of fishing with a donkey with an elastic band

The main difference between fishing with a donk with an elastic band and conventional gear is the process of its installation. The load is thrown or brought from the boat at the beginning of fishing and removed at the end. The main line is prepared as when installing a regular donkey. A rubber shock absorber is attached to the running end of the main fishing line (without a strap with hooks) using a carabiner fastener, the second end of which is attached through a swivel to a piece of durable cord about 1 meter long. The cord is tied directly to the ring on the sinker. Next, the rubber is laid in a dense snake on a clean, flat surface at the water’s edge, separate from the fishing line. When casting a sinker with the right hand, the angler stands to the right of the elastic band, takes the sinker by the cord and throws it, accelerating it with a pendulum or circular rotation in a vertical plane. The cord is needed to protect the elastic from breaking when thrown.

After casting and eliminating the slack in the fishing line, do not tighten the elastic band for several minutes to allow the sinker to “suck” and stick to the ground. After this, the main fishing line is smoothly taken to the shore, folded in rings behind and away from you, until the end of the shock absorber arrives, which is fixed to the peg with a loop previously made on the main fishing line. Now install the insert-strap with leashes and hooks between the elastic band and the main fishing line (all through carabiners with swivels - the tackle is ready. To make it convenient to work with the hooks alone, follow behind the place where the fishing rod is installed and slightly to the right, pre-install a stake with a hook at a distance from the edge water equal to the length of the line. Thus, you can service the bottom alone, hooking the near end of the line to this stake. Now let go of the line again and adjust the length: the elastic band should completely select the main line, but not pull it. The slight slack of the line from the fishing rod is compensated by the bell ( A bell made from a brass casing from a hunting cartridge is best suited. A correctly configured alarm will respond sensitively to bites, both to jerks from the shore and to pulls to the side and to the shore. Having prepared the tackle in this way, we proceed directly to the fishing process. (!) It is important to remember: - do not hold the tackle taut when working with hooks, always fix the line on the stake behind you; - when releasing the fishing line into the water, always try to keep it as high as possible - this way the hooks are less likely to catch on the algae and the bait will not be torn off by the protrusions of the bottom; - if there is bottom vegetation or reeds in the place where the fishing line is lowered near the shore, take the time to clear the gap for unhindered release of the fishing line with hooks and landing the caught fish; - never lay the fishing line in front of you at the edge of the water - it will definitely get tangled when the hooks move, especially if a fish is caught on the tackle.

Brief recommendations for catching different types of predators

For perch fishing, we recommend using an elastic band with a cross-section of up to 5 mm. Single hook No. 8. The main line is 0.3-0.4 mm, the leads are monofilament 0.25 mm. You should not put more than 7-8 hooks, otherwise such equipment will not increase the catch, but will increase the consumption of bait and the risk of tangling the gear.

Fishing for walleye will require heading to rocky or sandy flats with minimal vegetation. If a predator refuses to bite, try looking for it in the depths. He likes to hide in holes (minimum 3000 mm) with clear water and a rocky bottom.

But you will have to make small changes in the design of the equipment, take an additional sinker weighing 35 g. We make it a sliding type and place it in the space between the rubber and the first leash assembly. The leashes are also sliding, we fix their movement with 2 beads installed at a distance of 500 mm from each other.

Fishing for pike with an elastic band is a gambling activity. Spring pike fishing in muddy water allows you to hook leashes of the same section as the main line. The distance from the end of the rubber to the first leash is from 6 m. It is better to raise such tackle above the bottom. To do this, we fix small floats in the space between all the leashes, which lift the hook with bait and the pike will see the bait at a long distance.

Catching predatory fish will be effective if you use several types of baits in one tackle.

Fishing with a rubber band

Donka-elastic band is usually used for a certain range of peaceful and predatory fish. Among the main “victims” of gum are:

• crucian carp;
• perch;
• roach;
• saberfish;
• gudgeon;
• zander;
• carp;
• pike.

It is possible to quickly reorient the tackle by replacing the leads. So, after catching pike perch, it is enough to install leashes 0.18-0.2 mm thick with appropriate hooks to switch to catching crucian carp or perch.

A guide to catching saberfish with a rubber band - what bait to use and how the process of catching the most attractive fish for fishing with a rubber band is structured. We make donka with our own hands - three varieties in our detailed article.

There is also no need to make the leashes heavier; the weight of the hook and bait is enough for the bait to end up in the lower layer of water. When fishing on a lake or pond, you can use an elastic band of a smaller diameter; in many cases, it is enough to use a shock absorber with a thickness of 3 - 4 mm.

The most common type of fish for rubber band fishing is saberfish. At night, fishing for pike perch will be successful.

From April until June, you can catch crucian carp in reservoirs. Pike, bream, silver bream, ide and other types of fish are also caught.

Catching predatory fish with a rubber band

The elastic should include a thick thread to which up to five leashes are attached. You also need to use an aircraft model rubber band (a short piece) and a sinker, the minimum weight of which should be 200 grams.

Catching sabrefish with an elastic band

In the summer, it is better to fish in shallow water, mainly flocks of sabrefish will feed there until the fall.

Rubber band device for catching sabrefish:

1. The sinker can be a massive lead part. You need to attach a strong rope (0.5 - 1 m) to it.
2. The elastic band must be of very high quality, without any defects. After wetting the ends of the elastic, you need to make a couple of loops using a double knot.
3. You need to add several swivels to them.
4. The rope and elastic band should be combined with a winding ring or latch.
5. The second end of the rubber should be used to attach the working length of the main thread (from 4 to 5 m). Fix leashes (3-6) and hooks (35-50 cm) on the segment.

Feeding sabrefish when fishing with an elastic band. Method No. 1

To prepare the bait, you can take barley porridge, millet and breadcrumbs (all 1 to 1). Pour millet and barley into a glass halfway, pour everything into a container and add two glasses of water.

When the mixture is boiling, you need to stir it constantly until all the water is absorbed.

Baits and lures

Well-made equipment is only half the battle. Fishing will be successful when you manage to guess the taste preferences of predators. For bait, use only those species of live bait that live in the reservoir. They must be strong and remain alive and mobile for a long time. We do not recommend planting rotan, such live bait will not attract predators, although it is tenacious. For live bait it is recommended to use:

• crucian carp;
• small perches;
• roach;
• ruffs;
• rudd.

The main thing is that the bait is fresh and active. They hook the bait in different ways. Many fishermen recommend hooking single hooks into the upper jaw. Some people like to hook single hooks and other types of hooks under the dorsal fin on predators. There is a way to thread the line through the gills and after removing the leash from the mouth, tie a hook or secure it with a carabiner.

In the fall, predators prefer passive prey, saving energy to accumulate fat in the winter. During this period, you can use sprat and pieces of fish for bait. It is better if the bait has mirror scales so that predators can see prey from a distance. You can tie jigs or small spinners, especially for catching perch. Such baits arouse interest with their game and the smell of the bait.

The introduction of animal complementary foods in combination with the addition of industrial attractants for predators will increase the catch, but such complementary feeding is not needed for active fish.