How to wind fishing line on a reel

Model power

Lightweight and compact household devices for controlling grass on a plot of less than 15 acres have a power of up to 1 hp.
This indicator is enough for a summer house or a small lawn. Power ranges from 1 to 3 hp. necessary for combating bushes and thin branches. This is an indicator of industrial and universal units. They have a longer service life, weight, and some models can create a high noise level.

If you need to get rid of young shoots of trees, thick branches of bushes, use lawn mowers with a power of more than 3 hp. These are heavy devices that require great physical effort to operate. The advantages of such mowers are a large fuel reserve, separate refueling of gasoline and oil, and high productivity.

Model with shoulder strap for ease of use

Winding technique

Before you begin winding the fishing line onto the spinning reel, you need to install the device itself on the spinning rod (or fishing rod), or secure it in the machine, if you have one. After securing, you need to stretch the fishing line or braid through the rod rings, starting from the last one and ending with the reel itself.

First method

First you need to wrap the line around the reel spool (the same is done with braid).
The working end of the fishing line needs to overlap with one of the veins, this is necessary to create a kind of loop.
Then you need to twist the loop, which involves 4-6 turns.
After this, you need to tighten the tip into the loop that is formed as a result of twisting, and tighten the knot.
Now simply reel in the line using even movements of the reel handle.

Second method

A loop of small diameter is formed at the end of a fishing line or braided cord.
Now the main core is inserted into it to form a kind of loop with a large diameter.
After this, a large loop is thrown onto the reel spool and tightened (you need to be careful, otherwise it is very easy to confuse the tightening direction).
Then the process of evenly laying the line onto the reel begins.

Third method

First, a double loop is formed, which is then put on the spool.
After this, the working end of the fishing line is inserted into the loop.
Then the knot needs to be wetted and tightened, you should get something similar to a clinch knot, but with an additional large diameter loop.

After winding the fishing line onto the spinning reel is completed, it is necessary to lay it evenly. For this process you need to create some tension on the cord or fishing line. For this process, various devices are used, or an assistant holds the blank with fishing line in his hands.

The assistant needs to hold some kind of rod in his hands; a pencil is best for this. This fall you need to put on a bobbin with fishing line or braid that you want to wind. Now all that remains is for one to turn the reel handle, and the other to hold the reel in such a way as to create the necessary tension in the fishing line.

Some fishermen use a small plastic bucket to carry out this process. The bobbin must be placed on the bottom of the bucket, while holding it between the legs. This way you can constantly monitor the reel and it will not leave your field of vision. You can create additional tension using the fingers of the hand in which the spinning rod is located during winding.

Easel method

To make winding fishing line onto a spinning reel easier, you can use a special machine that is sold in a store or made by yourself. Today there are a lot of such devices, they differ in modifications and appearance, but their operating principle remains standard.

The machine is rigidly fixed on a flat surface (usually a table), using a suction cup or a special clamp.
The bracket is equipped with one or two axles, which have springs with clamping mechanisms.
After this, you need to install the bobbin on it and firmly clamp it.
Increasing or decreasing the pressure on the springs allows you to change the tension force during winding.

Line winding device

The process of rewinding fishing line onto the spool of a fishing reel is not a difficult task, but if you rewind it alone, the reel with fishing line either has to lie horizontally, which is not entirely correct, or it rolls all over the room. With an assistant, the process is simplified; you can insert a pencil into the hole of the reel and ask to hold the reel in a vertical position. But this is all inconvenient...

Many people know about the device for winding fishing line, and many use it. I saw several options, including those made by local craftsmen. A very convenient thing.

Today's review is about a similar device for winding fishing line on fishing reels from the Gearbest store.

The device is supplied in a plastic bag with a cardboard label.

The delivery set includes: Suction cup base, frame, two cones, two ring stoppers, two springs, two rubber rings.

The frame is made of aluminum, very light. Rod diameter – 8 mm.

The length of the working section of the rod before the bend is 110 mm, the distance between the horizontal sections of the frame is 74 mm (the maximum possible radius of the installed reel with fishing line).

On the bottom of the frame there is a thread for screwing into the base and there is a nut. The nut locks the thread when installing the frame into the base to prevent spontaneous unscrewing and turning of the frame during operation.

The cones are also made of duralumin, the base diameter is 25 mm, the total height is 10.4 mm, the height of the conical section is 6.4 mm. Hole diameter – 8.5 mm.

The springs are steel, wire diameter 0.7 mm, coil diameter – 11 mm, free length – 19 mm, spring stroke until fully compressed – 13 mm.

Ring stoppers made of duralumin. Diameter 19.8 mm, thickness 8 mm, hole diameter 9 mm. A hole with M4 thread is drilled for the fixing screw. Fixation on the frame is done with a wing screw.

The purpose of the rubber rings is not entirely clear to me, except to prevent the unfixed cones and springs with stoppers from flying off the frame.

The base is plastic; there is a metal nut to secure the frame. The suction cup is silicone, spring-loaded, for quick installation and removal of the suction cup there is a lever on the base, and a tongue on the suction cup itself.

We assemble the device, prepare the reel and fishing line. The maximum possible distance between the tops of the cones is 55 mm.

In the spool of fishing line, cut the sticker to the size of the central hole.

We install the device on the table and clamp the spool of fishing line between the cones. By the way, the suction cup holds well only on smooth surfaces; the slightest texture - and the device holds very mediocrely.

By compressing the springs, you can adjust the smooth rotation of the reel and thereby create a slight tension in the line when winding. We fix the end of the fishing line on the spool of a spinning “meat grinder”.

When you try to rewind the fishing line, as in the picture from the store, directly from the device, it doesn’t work out very well; axial runout of the reel on the device occurs - the line is wound unevenly, and it’s not comfortable to wind.

It works much better to wind the line onto a reel mounted on the rod, passing the line through the first ring. Winding occurs evenly, without vibration of the device.

Result

Not bad. Certainly no worse than when rewinding without a device.

Conclusion.

A very useful device for a fisherman, it allows, albeit slightly, to set the tension force of the fishing line, and most importantly, it makes it possible to reel in a high-quality fishing line alone, saving nerves and time.

How much fishing line to wind on a spinning reel

The principle of calculating the capacity of the main cord is similar in the multiplier and inertial versions. The cord is wound onto the multiplier reel without preliminary calculations or other auxiliary operations. The amount of material to be wound is determined visually; until the free volume of the spool is completely filled, about two millimeters of the useful volume are not wound.

When purchasing fishing line or braided cord for subsequent winding on a spinning reel, the angler must take into account these data on the volume of the spool, comparing the diameter of the cord and its quantity on the purchased reel. As a rule, the amount of cord with a purchased reel should not be much higher than the amount in theoretical calculations.

The work of cutting the cord on an inertial reel consists of winding a volume of three quarters of its height. It is this kind of filling that is convenient to work with both when casting and when retrieving, without fear of unauthorized tangles of the cord over the upper edges of the spool. Difficulties in determining the size of the cord for a spinning reel are solved with the help of a spare spool and backing. We will talk about these features in more detail in the next section of the article. The volume of the spool is wound based on the principle of underwinding to its upper edges of about three millimeters.

This feature prevents the rings of the main thread from coming off without permission. This size must be maintained. After all, when casting, the cord comes off the spool automatically due to the force of the flying bait, and in this case the angler will definitely not be able to prevent the extra rings from self-resetting, which will lead to a guaranteed beard

Here I would like to draw attention to the cross problem of winding with clipping of the cord when casting

Backing

Backing may also be needed if you do not need long casting or if you want to put part of the line on another reel. Backing is a fishing line or an old cord designed to fill excess space on the spool, in other words, winding under the main fishing line.

The backing should be stronger than the main line, but at the same time not differ much in diameter from it, then the winding will be smoother.

All fishermen know that the line should be wound almost under the side of the spool, namely not reaching the edge 1-1.5mm. Everyone achieves this in different ways, some use electrical tape, others use regular thread, others come up with other methods, but the only correct option is backing.

In order to correctly calculate the reel length, it is advisable to have a spare spool, which you need to install on the reel. If you don't have one, you'll need two free spools of fishing line.

First of all, we take our reel, put a spare spool (if available) and snap the free end of the line into the clip.

Now you need to create tension. You can do this in several ways:

Place the spool of fishing line in a bucket of water
Ask a second person to hold the bobbin on a pencil while adjusting the tension
Using a special winding device (machine)
Clamping the fishing line between the sheets of any book (this method is not suitable for braided lines)

I will use a bucket of water. We throw the reel with fishing line into the bucket and start reeling.

Connecting the backing and the main line

When the main line runs out, we need to tie the backing. You can connect the braid and backing using any knot for connecting two lines, for example a gripping one, for this:

We go around one of the fishing lines with the second
We make 5-7 turns with the short end of the fishing line around the long one
Thread the short end under the twist
Tighten the knot

We repeat the same operations with the second line and get this connection:

After connecting, throw the reel with backing into the water and continue winding until there is about 1-1.5mm left to the side of the spool. Depending on the rigidity of the fishing line, this distance can be increased or decreased. If the fishing line is rigid, the distance must be increased to prevent the loops from coming off when the bow is opened.

Now we need to tie the end of the backing to the spool that we will use for fishing. I have a spare spool so it will save a lot of time. If you don’t have a bobbin, you will have to first rewind all the equipment onto one bobbin, then onto the second, and only then start tying the backing to the main (working) bobbin.

What is backing?

It happens that the wound thread is not enough. In such situations, fishermen use backing - winding an additional bobbin with thread. This winding is located on the bottom of the spool and plays only an auxiliary role and is not involved in fishing. It is better to use a thicker thread for backing.

To make such a winding, you need to unwind the cord from the spool, and then install it with the reverse side. To replace, unscrew the clamping nut, release the drum and remove it from the reel. An empty one is installed in place of the removed spool. The thread is rewound from the main bobbin to a new empty one.

After this procedure, the winding line should be at the bottom of the spool. If you don’t have a spare one, you can use a bobbin on which the thread was wound in a store package.

What is better to use for backing: fishing line or thread?

The main thing is not to use cheap fishing lines and threads, because they will quickly rot. 100% synthetic works well

It is important that the winding diameter is smaller or the same as the main cord. This will determine how smoothly the line will lie in the reel.

How to properly wind fishing line onto a fishing reel

Before winding the fishing line onto the reel, it is important to decide what type of winding is needed. The casting distance and the likelihood of dropping loops (“beards”) depend on this.

Note: It is important not to make a mistake with the winding direction: it should coincide with the working rotation of the spool, although many modern reels can rotate in both directions.

There are three installation options in total:

Reverse cone: this method is considered the most popular among fishermen, because the likelihood of dropping loops is minimized, but the casting range suffers. This effect is ensured by the fact that the winding pitch gradually decreases from the center to the sides of the spool.
With a simple cone: this method of winding is the opposite of the previous one. That is, the tackle can be cast far enough, but you will have to handle the fishing rod extremely carefully to prevent the appearance of a “beard”. In this case, the winding pitch gradually increases from the top edge of the bobbin to its base.
Cylindrical: in purchased spools, the line is wound in exactly this way, that is, directly, with an equal pitch in the upper part of the spool and its base. This winding method successfully combines optimal casting distance and reducing the risk of loops dropping.

Figure 1. Winding methods: 1 - reverse cone, 2 - simple cone, 3 - cylindrical
When winding fishing line onto a spool, you need to take into account a few more important points. First, the coil must be properly filled. Neither half-winding nor “slide” winding should be allowed. In the first case, the cord will not come off the reel well and the casting distance will decrease, and in the second there will be a high risk of loops dropping (Figure 1).

Useful tips

Even the most experienced and experienced fishermen once had their first fishing trip, for which they carefully prepared. At the same time, one of the key points for a spinning player is the correct winding of the fishing line or cord on the reel.

It is this stage that it is strongly recommended to pay appropriate attention. First of all, it is necessary to focus on the existence of several varieties presented on the reel market

It is important to remember that this point is one of the determining ones when choosing a method for winding fishing line and cord. We are talking about the following options:

inertial reels in which the replacement of the spool is not provided;
inertia-free, which currently enjoy record popularity and are the most common type; they are distinguished by the ability to rearrange the spools, which greatly simplifies winding, in particular, backing;
multiplier models, which also do not provide for the replacement of the main structural element.

It’s easy to conclude that the simplest option is spinning reels for spinning rods and other types of fishing rods. The other two categories of products have their own characteristics and require an appropriate approach when equipping

In a situation with inertial models, when winding fishing line or braid, it is recommended to pay attention to the following important points:

in most cases, the device capacity averages 100 meters;

if there are guide rings on the rod, regardless of its type, winding is carried out with the rod assembled;

after laying out the spinning rod, fishing line fiber or braided cord is passed through all the rings, starting with the smallest diameter; it is important to make sure that the bow responsible for laying the fiber is bent, then it will be necessary to secure the line to the reel using a knot or a special stopper; the next step is to slowly wind several turns by hand, after which you will need to turn the reel lever;

the correct shape of the winding profile provides for the arrangement of the fiber according to the principle of a conventional spool of thread; in this case, among other things, we are talking about the maximum density of turns in the absence of any gaps.

When using multiplier reels, you should take into account their main feature. The fact is that such devices are designed for winding fishing lines and braids of a certain diametrical cross-section. That is, each model is designed for a specific diameter. Equipment and preparation for operation of spinning reels for spinning rods and other fishing rods is carried out taking into account the following features:

the diameters of the cord and monofilament used must correspond to the parameters indicated on the reel itself, otherwise problems may arise during winding; in each case, the shape of the winding profile is determined by the diameter of the fiber used, and we should not forget about the backing; It is strongly recommended to pay special attention to the passport data of the coil, which is entered into the documents by the manufacturer; Winding the spinning spool onto the spool should be carried out with maximum tightness of the turns or crosswise.

In addition to the described nuances of equipping currently existing types of spinning reels, it is necessary to focus on several general recommendations. Considering the following important points, you can significantly simplify the winding process:

in the case of modern models of multipliers, it is convenient to determine the volume of spooled fiber using an integrated counter; if this device is not available or a reel of a different type is installed, then an alternative would be to apply marks in increments of several meters directly on the fishing line or braid itself; the key to high-quality winding is the absence of a large so-called knot shape;

when winding the fiber, the tension must not be loosened, which must remain the same throughout the entire process; special attention should be paid to the location of the first turn, on which the further distribution of the fishing line will depend; It is permissible to use a so-called trapezoidal profile, in which the principle of a reverse cone will be relevant.

In addition to everything already stated, it is worth focusing on the financial side of the issue. As practice shows, most often the purchase of cheap reels and fishing line turns out to be unjustified. As a result, the real cost savings are the choice in favor of higher quality products and materials for equipment.

See below for information on how to wind the fishing line.

How do trimmer heads differ in the way they load fishing line?

Based on the type of fishing line charging, the devices in question are classified into types:

Quick-loading (they are also non-separable) spools are modern types of reels that do not require disassembly.
When the reel runs out of fishing line, to replace it you need to insert the prepared section into the holes in the head and, aligning the two ends, screw it onto the drum. Automatic heads are equipped with such fishing line charging mechanisms, but semi-automatic ones are also found. Their advantage is that the master does not need to figure out how to properly wind the fishing line onto the trimmer reel, and even more so, spend time refilling it
Collapsible - these types of reels are found on all semi-automatic and manual heads.
To wind a new line onto a reel, you need to complete the grass cutting process and devote at least 10 minutes to the process. The procedure begins by removing the head cover, under which there is a removable coil. The required length of cord is wound onto the bobbin and installed back in its place

The second option, although it has disadvantages, most mowers use collapsible reels, which is associated with their cost. Due to their popularity, it should be noted that semi-automatic heads consist of a body, a coil and a spring. There are two types of coils in such heads:

Single-section - they have one groove into which the fishing line is evenly wound
Two-section - a more common option, which consists of two grooves for laying fishing line. It is much more convenient to wind fishing line on such reels, and besides, there is no need to control the process of laying the cord

Even if you use a single-section reel, you can turn it into a two-section reel by separating it using a plastic ring. Plastic is used as a ring, from which a template is cut along the contour of the outer wall of the reel. A hole is cut inside the resulting template equal to the internal diameter of the sectional base. A slot is made in the resulting ring, and the finished separator template is placed on the reel. To ensure that the ring does not move and is in the center, you need to use a glue gun and glue it to the base.

Reel models and line winding options

The wide variety of types and models of gear made it necessary to study the question not only of how to wind a fishing line on an inertial reel, but also how to wind a cord on a spinning or multiplier reel. In addition, proper winding of the fishing line on the spool allows you to bring the casting distance as close as possible to the value declared by the manufacturer of the product. Another important point is that the fisherman must know how many meters of fishing line to wind on the spinning reel. Failure to comply with this parameter will lead to the fact that the braid, fishing line, and cord will wear out very quickly.

Multiplier

Since winding fishing line on a multiplier reel will work well, provided that it is of the thickness recommended by the manufacturer, be sure to pay attention to this indicator. Before winding the line onto the spool, make sure that it is neither thinner nor thicker than the specified values.

Winding fishing line onto a multiplier reel begins with fixing it on the spool. Pass the cord or line through the hole in the line guide and tie it to the spool axle.

Expert opinion Nikolay Mikhailovich Knipovich Zoologist, hydrobiologist

I am interested in fishing at a professional level.

Important! Before winding the line onto the spinning reel, make sure that the knot and the hole of the line guide are located exactly opposite! If you need to adjust the position, do it with the clutch loose, and then tighten it! If the spool is perforated, then before winding the fishing line on the spinning rod, thread it through the hole and tie it with a regular knot

If there are no holes, then use one of two types of knots to secure them:

If the spool is perforated, then before winding the fishing line on the spinning rod, thread it through the hole and tie it with a regular knot. If there are no holes, then use one of two types of knots to secure them:

special unit;
self-tightening knot.

Inertialess

Just as in the case of the “mult,” the cord is wound onto a spinning reel if its diameter corresponds to that declared by the manufacturer. If the diameter is smaller than required, then it will not be possible to wind the braid onto the spool efficiently. The result will be frequent occurrence of “beards”. In addition, the correct winding of fishing line on a spinning reel implies that the tackle will accommodate a certain footage of it - no more and no less. If the diameter does not match, a deviation from the parameters will occur.

Expert opinion Nikolay Mikhailovich Knipovich Zoologist, hydrobiologist

I am interested in fishing at a professional level.

Attention! Winding braid onto a spinning reel, as well as winding a cord onto a multiplier reel, must be carried out under the tension of the fishing line. This ensures tight installation and minimizes the chance of the scaffold falling off!

Correct winding of the fishing line onto the spool is carried out according to the “cross” or “turn to turn” pattern. Then the scaffolding is laid very high quality. If the braid is wound onto the reel correctly, then there should be 1-1.5 mm of free space left from the edge of the spool. Now that you know how to properly wind the fishing line on a spinning reel, let's talk about inertial gear.

Inertial

If you know how to correctly wind braid onto an inertia-free or multiplier reel, then you already have an idea of how to wind braid onto an inertial reel. The process is absolutely identical. Attach the cord to the spool and start winding

Since it is necessary to correctly wind the fishing line onto the reel while maintaining tension, be sure to pay attention to this. Another point worthy of attention is that the correct winding of the braid onto the spool is carried out slowly, with smooth and uniform turns of the handle

Often, a fisherman is interested not only in how to properly wind the line on a reel, but also in the question of how to do it more conveniently. Usually someone is called in to help hold the reel while the line is wound onto the reel. But what to do if there is no one nearby who could help? How to wind fishing line correctly on a spinning reel in this case? Now we will tell you a simple way to correctly wind braid onto a spool yourself.

You will need three books. Place two books in front of you parallel to each other so that there is a distance between them equal to the width of the book. Since you need to correctly wind the braid onto a reel with light tension, the third book will help us with this. Place the third book in front of the other two, and run a cord between the pages. Its edge of the line should come out of the book onto the tackle. Now you know how to wind the cord on a bobbin at home yourself.

Features of winding fishing line on a reel

Why is proper winding necessary?

Connecting the fishing line to the spool

The first step in equipping a reel with fishing line is securing the line to the spool. Many anglers do not secure the line, hoping that the lower layers will not be used, but this is not entirely the right approach. Over time, the top working layer will wear out and gradually shorten. There are many methods of tying, but the most common are a specially designed knot and a self-tightening loop:

The special knot is very reminiscent of a clinch. Its advantage is that it practically does not stretch and holds perfectly.
The self-tightening knot has a slight stretch, but under the influence of the tension of the fishing line it will continue to be tightened until it stops.

Backing (rewinding)

Taper profile

Different fishing reels apply wraps of line to the spool differently. There are three types of winding:

Cylindrical.

Trapezoidal.

Chaotic.

In turn, trapezoidal winding has two types of taper: direct and reverse.

A straight cone is formed if the technical feature of the reel provides for laying the turns with a decreasing pitch towards the spool wall. This cone ensures minimal friction of the turns during release. With a reverse taper, the pitch gradually decreases towards the spool flange. The friction of the turns with such a cone is greater, but the likelihood of spontaneous dropping of the line is reduced.

We will consider step-by-step instructions for cheating using each method below.

The straight or cylindrical method is the simplest, since here all winding consists of correctly securing the fishing line on the spool (using one of the above methods) and winding the fishing line evenly along the entire length of the reel. The result should be a cylinder. Due to its simplicity, this type of winding is the most common.

Winding with a bias is as follows:

1. Secure the end of the fishing line with a knot or using a stopper on the reel.

2. Winding begins: with a variable pitch, which decreases towards the spool wall. Thus, it turns out that there will be more fishing line near the wall, which is shaped like a cone.

3. Chaotic winding - this method is used only on poor quality coils and should not be used. The meaning of such winding is that here the turns are superimposed as it turns out, without any specific system. During fishing, this can lead to tangling and breaking of the fishing line, and involuntary removal.

Winding of fishing line onto a reel is carried out according to the following algorithm:

• You need to install a reel in the spinning reel seat.

• The fishing line is tied with a knot, as described above, or secured to a stopper. The line handle must be open.

• The reeling process begins: the line handle is lowered. The line should come off the reel smoothly and not fly off in coils, otherwise it may get tangled. During the winding process, you need to hold the ring already wound on the reel with one hand, adjusting the winding force so that the winding is not weak, but not too tight.

• Make sure that the fishing line does not reach the edge of the sides 2-3 mm.

• After winding is completed, the end of the fishing line must be inserted into the clip, which is located on the side of the spool.

You have probably already become familiar with the main criteria for choosing a spinning rod from the published article on the blog. It will also be useful for you to read the materials of the Siberian spinning fishermen of the Tugun club. As for the types of winding line on a reel, first let me give you a little advice. Correct filling of the reel spool with line also depends on the reel itself and its quality.

How to assemble a spinning rod correctly

can be difficult to assemble, so there are step-by-step instructions with a detailed description of the assembly process. Here are the main steps:

You need to take a set of rings and attach it to the rod. You need to use the entire set, starting with the large ring. The smallest one is located at the end of the spinning rod

It is important that the rings are attached to the rod in one line and on one side. A reel is attached to the rod. There is a special hole for this

As standard, it is located on the right, but for left-handed people you can attach the coil to the left. The line is pulled through the rings and attached to the spool. The swivel is then attached. It helps the line not to twist.

The first time this procedure may take time, but in the end any beginner will get the hang of it, and the process will not cause difficulties.

Coil

A spinning reel is an important part of any spinning rod. They differ in their parameters, but it is desirable that the reel be as light in weight as possible

A spinning reel is not the only, but the most reliable option. With it, casting and fishing for fish becomes not a very difficult process.

The reel's spool is where the line is wound. This drum must be smooth and free of any defects. Keep an eye on this when choosing a spool in a fishing store.

When choosing a reel, you need to pay attention to the spool capacity, which is indicated in mm, and the number of bearings. The spool capacity includes both the amount of fishing line and its diameter

The larger the diameter, the less line you can wind on the same reel.

The number of bearings affects the quality of the reel. Therefore, a large number of bearings is better. The mechanism becomes reliable and moves smoothly, and also has friction properties.

How to wind fishing line on a reel

To prevent the line from getting tangled in a spiral, you need to unfold the rod and reel in the line only in this position. The threading process begins with the tulip, and you will have to pass the line through all the rings. The next step is to secure the fishing line to the reel using a bow. For high-quality winding, tension is necessary. You can create it yourself or ask for help.

With proper winding, it is important to ensure that the distance from the fishing line to the side is strictly 1-2 mm, no more, no less. You can also buy a machine in the store that winds fishing line

What to choose: braid or monofilament

Monofilament line and braided line have their advantages and disadvantages. There are supporters of both. It’s difficult to give any definitive advice. Let's look at these types of fishing line separately.

Monofilament line. Lasts longer. It will not be cut by stones when landing fish. It's inexpensive. Of the minuses, it should be noted that after unwinding it may remain twisted.
Network. It does not twist, and therefore it is easier to cast with it. Has greater strength. The downside is that it costs more and lasts less. May break on sharp stones.

In any case, both options have their supporters. Therefore, here you should focus only on your personal tastes and preferences.

Lures

Spinning baits are divided into three types. Metal, silicone, wobblers. A huge number of baits confuse novice anglers. The simplest ones are metal spoons. They can be oscillating and rotating. The latter can be used to catch any type of predator and even simple fish.

An oscillating spoon bait works better for pike and pike perch. Silicone baits are a cheap and reliable option. They can be edible and are often used for fishing.

Tackle and equipment

Fans of spinning fishing know how to do it correctly. Spinning tackle is divided into the following components:

Rods. They differ in class and formation. The length of the rod depends on the fishing technique, fishing conditions and casting distance. Action is the flexibility of a rod.
Coil.
Fishing lines.
Artificial baits.