How to properly wind fishing line on a spinning reel for long casting, in which direction: diagram

Most spinning anglers use spinning reels with cylindrical winding or a slight reverse cone.

Before fixing the end of the fishing line on the spool and winding it, you need to clearly determine the amount of material. The coil should not be filled only to half or vice versa with a “slide”. In the first case, the line will not come off the spool well, which will negatively affect the casting distance, and in the second, dropping loops and the formation of so-called beards cannot be avoided.

Another factor that affects the comfort of fishing is winding density. Professionals do not recommend reeling in with great force, that is, making the tension too strong, otherwise the same thing will happen as if the spool is not filled enough - when casting, the line will come out with difficulty.

Modern inertia-free reels are capable of rotating in both directions (clockwise and counterclockwise), so it is important not to make a mistake with the winding direction. It should coincide with the working rotation of the spool.

How much fishing line to wind on a spinning reel: how many meters, what kind of fishing line?

Line on a spinning reel
The number of meters for each reel is individual, since it can have its own individual diameter and side height. Everything will also depend on the parameters of the purchased fishing wire. So, how much fishing line to wind on a spinning reel, how many meters, what kind of fishing line?

In this particular case, you should adhere to the following rule:

The line should not reach the edge of the sides by 1-2 millimeters , but not exceed 5 mm, since long casting will become impossible.

The reels are always marked with a line capacity marking. For example, if we take a fishing line with a diameter of 0.25 mm , we can wind 153 m , but with a diameter of 0.30 mm we can only wind 106 m.

Thickness:

The golden mean is a 0.25 mm , as it can withstand a tensile load of 6-8 kg .
For catching pike perch and pike, it is better to use a fishing line up to 0.35 mm , and for perch 0.16-0.2 mm .

As you can see, everything here is also individual. In any case, when purchasing, the seller will be able to recommend something to you, depending on which “predator” you are going for.

Types of winding fishing line on a spool

You have probably already become familiar with the main criteria for choosing a spinning rod from the published article on the blog. It will also be useful for you to read the materials of the Siberian spinning fishermen of the Tugun club. As for the types of winding line on a reel, first let me give you a little advice. Correct filling of the reel spool with line also depends on the reel itself and its quality.

By spending on a reel you will save on buying baits

The cost of such a toy averaged 1,600 - 2,000 thousand rubles. Plus, additional money was spent on buying fishing line. Frequent beards catastrophically quickly reduced the winding footage. As a result, in one season it was possible to spend an average of about 5,000 thousand rubles. And over the past 3 years?

I'll be brief. In order not to waste money and spend the saved money on catchy baits, just fork out for a normal reel right away. Don't chase top models. Pay attention to such manufacturers as Ryobi, SPRO, Okuma. Now, with the deplorable rise in prices, reels have become somewhat more expensive, but still, spending 5-6 thousand once will last you for 5-6 years. This is exactly how long my Ryobi Excia 2000 lasts.

Types of line laying on the reel spool

To avoid further confusion, let's immediately define two terms - laying and winding fishing line.

The lay is the shape the line takes after the spool is completely filled. There are three of them in common use:

straight cone;
reverse cone;
cylinder.

The shape of the laying depends on the shape of the spool and its position on the reel rod. The casting distance depends on the placement, and the winding of the fishing line determines the likelihood of a “beard” forming.

Winding - placing turns of fishing line on the spool.

Recently, many spinning reels, including the above-mentioned companies, have used cross-shaped winding. But on different coils, depending on their design features, the winding pitch (the distance between adjacent turns) can be different, and can also be constant or variable. The larger the winding pitch, the less likely the formation of a “beard”, but also the less line is placed on the spool. Therefore, winding with a large pitch looks loose in appearance.

The most acceptable is cylindrical installation. Problems with beards often do not arise. The bait flies further due to less friction on the sides of the spool.

Adjusting the taper of inertia-free reels

Adjustment of line laying is done by moving the spool along the reel rod. This can be achieved by using special washers. They can be factory-made or self-made. Excellent pucks are made from wobbler boxes.

If we raise the spool, then more turns are wound at the wall and we get a straight cone; we lower it along the rod - at the side, and a reverse cone is formed. It's still a bit of a hassle, but it's necessary. You can verify its effectiveness while fishing.

Fishermen often confuse the terms “reeling” and “laying”. They are really close in meaning, but the second term suggests the shape that should be formed on the spool as a result of winding.

How to wind fishing line on an inertial spinning reel?

The fishing line is correctly wound on the inertial reel of the spinning rod.
If you bought a spinning rod, but do not yet know how to use it, you need to look at the instructions that came with it and check it. According to the class offered for sale, the inertial reel must be suitable for the given fishing rod, as well as for its cord. The inertial reel is interesting because it does not directly participate in throwing the spinning rod into the water. How to wind fishing line on an inertial spinning reel?

It is worth noting: Sometimes a trophy caught on a hook - a fish - can “choose” up to 200 meters of fishing line, especially if this aquatic animal is of a predatory nature, which also often happens. Therefore, you need a good margin in the length of the fishing line.

The fishing line in a spinning rod is tied to the drum at one end, and to the cord at the other. This is a feature of winding fishing line on this type of reel.

Professional fishermen advise: Before you start learning how to properly wind fishing line onto a reel, you should first buy backing.

Backing consists of synthetic fibers that are laid on a spool of 10 to 100 meters. Due to this device, the diameter of the drum increases. Thanks to this, the turns of the cord will be positioned correctly, closer to the side of the spool.

Experienced fishermen note: Many people make a mistake when preparing a spinning rod for work.

There are only two correct ways to wind:

When the line is positioned against the rotation of the inertial reel.
When it is located along the rotation arrow.

If you place the line in rotation , you may get a “beard”. In this case, it will be difficult to withstand the process of fishing in this case. The fishing line will constantly get tangled.

Placing the fishing line opposite the movement of the reel is the surest way, since in this case, the reel drum will rotate correctly and there will be no “beard”.
That is, if you wind the line clockwise, the reel can drop the line, if counterclockwise, it will spin correctly. In other words, the line wire in a spinning rod with an inertial reel should be wound along the rod - it’s simple.

How to spool fishing line correctly

You need to install a reel on the first leg of the spinning rod and remove the spool. The main line must be threaded through the spinning ring and tied to the spool. Don’t forget to open the line handle before installing the spool on the reel. The line must pass through the line roller. If you have a spare spool, then it is better to carry out this action with it when determining the volume of backing and the initial winding profile.
The fishing line spool has a central hole, so it can easily be attached to a pencil or pen. To avoid twisting, the line should come off the bobbin as it unwinds, and not come off in coils when the bobbin is stationary. We ask a partner (children are the best helpers) to hold the spool of fishing line on a pencil. If there is no partner, you will have to adapt by holding a pencil with a spool between your knees. You can use special devices for unwinding fishing line from reels. They can also regulate the force of winding the fishing line onto the spool.
Using one hand through a rag or wearing gloves, so as not to cut yourself or burn yourself on the fishing line, we clamp the fishing line above the first ring. With this hand you can regulate the force of winding the fishing line onto the spool (as tightly as possible, but without fanaticism). With the other hand, we begin to turn the reel handle at low speed.
The volume of the fishing line being wound should be such that the fishing line does not reach the edge of the spool collar by 1-3 mm. If the volume of the fishing line is not enough, then we tie the backing to the fishing line and continue to wind it to the required volume. Winding the fishing line to the edges of the bead is fraught with loops coming off and “beard”.
After winding the line and backing to the required level, it is necessary to rewind the line from the spare spool to the main one. If the line winding profile is unsatisfactory, you can adjust it by removing or adding the necessary adjusting washers. If there is no spare spool, then for the final winding of the fishing line you will have to rewind the fishing line either to another reel, or first to one reel, then from it to the second reel. This is necessary to turn the line over. For these purposes, you can use a drill by attaching bobbins to the spindle.
After the final winding of the fishing line onto the spool, we attach the edge of the fishing line to the clip, which is located on the side of the spool.

Next is a video from a spinning fisherman, which describes and shows the process of winding fishing line onto a spinning reel.

Compliance with simple principles: the use of backing, the correct force, profile and volume of winding will allow you to obtain optimal use of the gear and ensure working with it at a high level of efficiency.

How to wind fishing line on a spinning reel alone: video

Inertia-free spinning reel
The procedure for winding fishing line on a spinning reel is considered one of the simplest. It can be done alone, without assistants. Here are the steps:

Place the bobbin on a metal pin, which must first be secured statically. This could be a pencil, a knitting needle or a long screwdriver. The main thing is that the bobbin rotates freely.
Thread the fishing wire through the rings and tie a knot. Start threading from the spool mount.
Now raise the line arc and wrap the line thread around the spool. Make another knot and tighten. Lower the line guide.
You can stick a patch under the attachment point or attach a piece of elastic cut from the fingertip. This will help the fishing wire wrap properly and prevent it from slipping.
Now wind the fishing line by rotating the handle.
The line must be kept taut at all times. To do this, hold the reel with your free hand.

Watch the video. In it, an experienced fisherman tells how to reel in a fishing line alone using backing.

Winding technique

Before you begin winding the fishing line onto the spinning reel, you need to install the device itself on the spinning rod (or fishing rod), or secure it in the machine, if you have one. After securing, you need to stretch the fishing line or braid through the rod rings, starting from the last one and ending with the reel itself.

Before you start winding the line, you need to tie it to the reel. You can read about how to tie a fishing line to a reel in this article.

First method

First you need to wrap the line around the reel spool (the same is done with braid).
The working end of the fishing line needs to overlap with one of the veins, this is necessary to create a kind of loop.
Then you need to twist the loop, which involves 4-6 turns.
After this, you need to tighten the tip into the loop that is formed as a result of twisting, and tighten the knot.
Now simply reel in the line using even movements of the reel handle.

Second method

A loop of small diameter is formed at the end of a fishing line or braided cord.
Now the main core is inserted into it to form a kind of loop with a large diameter.
After this, a large loop is thrown onto the reel spool and tightened (you need to be careful, otherwise it is very easy to confuse the tightening direction).
Then the process of evenly laying the line onto the reel begins.

Third method

First, a double loop is formed, which is then put on the spool.
After this, the working end of the fishing line is inserted into the loop.
Then the knot needs to be wetted and tightened, you should get something similar to a clinch knot, but with an additional large diameter loop.

After winding the fishing line onto the spinning reel is completed, it is necessary to lay it evenly. For this process you need to create some tension on the cord or fishing line. For this process, various devices are used, or an assistant holds the blank with fishing line in his hands.

The assistant needs to hold some kind of rod in his hands; a pencil is best for this. This fall you need to put on a bobbin with fishing line or braid that you want to wind. Now all that remains is for one to turn the reel handle, and the other to hold the reel in such a way as to create the necessary tension in the fishing line.

Some fishermen use a small plastic bucket to carry out this process. The bobbin must be placed on the bottom of the bucket, while holding it between the legs. This way you can constantly monitor the reel and it will not leave your field of vision. You can create additional tension using the fingers of the hand in which the spinning rod is located during winding.

Easel method

To make winding fishing line onto a spinning reel easier, you can use a special machine that is sold in a store or made by yourself. Today there are a lot of such devices, they differ in modifications and appearance, but their operating principle remains standard.

The machine is rigidly fixed on a flat surface (usually a table), using a suction cup or a special clamp.
The bracket is equipped with one or two axles, which have springs with clamping mechanisms.
After this, you need to install the bobbin on it and firmly clamp it.
Increasing or decreasing the pressure on the springs allows you to change the tension force during winding.

Next is a video from a spinning fisherman, which describes and shows the process of winding fishing line onto a spinning reel.

How to wind fishing line on a fishing reel: tips

The fishing line is correctly wound on the fishing rod reel
. The main thing when winding fishing line on the fishing rod reel is to take this matter seriously. After all, if you wind the fishing line incorrectly, the loop may be thrown off, and then you will not have to remove the fish, but will have to untangle the lump of fishing line for a long time. So how can you avoid making mistakes? Adviсe:

Hook the bobbin onto a rigidly placed, level stick, handle, knitting needle or similar object. Most importantly, the fishing line must be perfectly straight - this is very important.
You'll need one more free hand. But, if there is no one to help, then you can manage this process yourself. The above describes instructions on how to wind fishing line alone.
Then pull the line through the ring and tie a knot at the end.
Then attach the fishing line on top of the bobbin in a circle, first raising the arc of the line guide, and after the next tightened knot, lower the arc.
It is important to ensure that the line is not level with the sides of the bobbin to avoid dropping loops. As described above, it is best to leave 1-2 millimeters to the side and preferably no more
Ready.

For many fishermen, it is important when winding fishing line what material the spool is made of. Read about it below.

How to tie fishing line to a spool

Tying a backing device or line fiber to the bobbin device is mandatory, as this avoids the loss of a large fish specimen, as well as spinning the line fiber on the bobbin device when winding or fishing for fish. Additionally, electrical tape or a regular piece of plaster is glued in the direction of winding.

Binding is carried out:

using a self-tightening double loop;
using a clinch;
using similar knots, but the best options are the first two types of knot form.

Scheme for tying fishing line to spool

For successful fishing, every angler must, first of all, prepare for it. Correctly winding the fishing line onto the reel is an important process in this matter.

How to wind fishing line on a baitcasting reel?

Multiplier reel with fishing line
This process will not seem complicated to you, but it is important for successful fishing and a good mood in the process. Incorrect winding of the fishing line can result in it getting tangled at the most inopportune moment. Undoubtedly, the resulting “beard” will not allow you to get a good catch. How to spool fishing line onto a baitcasting reel?

Unlike a spinning reel, winding on a multiplier device will be much simpler and does not have any different options or methods. In its process, three basic rules must be observed:

The fishing line is tied to the reel in the hole intended by the design. In this case, it makes sense to use a knot that will definitely not come undone and will hold the end tightly.
The rings should overlap tightly - one to one. The fishing line should be stretched well and, rotating the handle of the product, apply ring after ring.
Subsequent layers of fishing line should not cross each other. This consistent and even winding prevents tangling.

This is the entire process of winding the line. It is worth noting that it is important to tension the thread well so that it lies tightly on the spool and subsequently cannot cross and tangle.

How to tie and wind braid onto a spinning reel

Braid should be selected in accordance with the manufacturer's recommendations. Otherwise, unpleasant consequences may occur in the form of bumps and furrows.

First you need to take a braided cord and make a small loop at the end. Then install the spinning reel on the spinning rod.

Winding braid onto a reel spool - a self-tightening loop on a spinning reel

To get closer to the fishing conditions and wind the braided line onto the reel with high quality, you need to place it in the water for a while. It will become softer and fit better. You need to reel directly from the water.

Winding braid onto a spinning reel directly from the water

When the cord fills the reel almost completely, winding must be stopped. Of course, unlike regular fishing line, braided line can be wound to the very edges. But it’s better to play it safe and finish the process when the cord is about a millimeter below the edges of the spool.

The quality of the cord laying indicates the quality of the spinning reel

Before fixing the tip of the selected material to the spool and starting the winding process, it is necessary to determine the amount of fishing line that must be wound.

The winding process takes a little time, but you need to make sure that the cord is stretched with even tension to avoid unwanted rolls and grooves.

How to properly wind cord/braid onto a spinning reel:

What problems may arise during the winding process?

Braided cord is durable and wear-resistant, but can be difficult to wind. It can spin and slide along the spool. There are reels with a surface that prevents scrolling, however, if the reel is not designed for braid, you need to use a rubber backing. You can also secure the first turn with tape or tape.

Inertia-free coils in the modern world can rotate both clockwise and counterclockwise. Therefore, a common mistake is the wrong winding direction. The main thing here is not to make a mistake and follow the rule - winding should occur parallel to the stroke of the spool.

The line may spin during winding. This may signal a bad node or neglected backing. It must be used for smooth winding and no twisting.

Sometimes there may not be enough line and the reel needs to be filled to about the edge of the spool.

In this case, backing will come to the rescue again. The most effective material will be simple construction tape. It has the necessary elasticity and has good backing winding speed.

However, there are some downsides: this option is short-lived and can also lead to problems with using the coil.

When the winding process requires the cord or line to be wetted, problems with uneven winding may occur. You need to reel in with a certain tension; to do this, you need to ask another person to hold the skein of fishing line, or use specialized structures that can provide sufficient tension.

Winding must be done under tension

Often, novice fishermen confuse reeling with laying. The terms are indeed similar in meaning, but the first involves winding on a spool, and the second a form that is formed as a result of winding.

How to wind braid onto a reel without a spare spool with backing:

How much fishing line should I wind on the girder?

Fishing line on a zherlitsa
A zherlitsa is an effective device for catching predatory fish, for example, you can use it to catch pike. Knowledge of the rules for its installation, including the amount of fishing line required, can provide a good result. Fishing line for a girder: how much should you reel?

The amount of fishing line on the girder should exceed the depth of the reservoir by 3.5 - 4.5 times.

It is important to understand: The value is calculated not from the greatest depth of the reservoir where fishing will take place, but from the place where the girder itself is installed. Taking into account the fact that such a structure is not installed at a depth exceeding 4 meters, fishing line is not wound onto the girder for more than 15 meters.

The length of fishing line required varies depending on the bottom of the reservoir.
If it is abnormal, there are a lot of snags and other “interference,” then the length of the fishing line should exceed the depth by no more than 2.5 times maximum.

Such parameters of the fishing wire limit the pike’s movements and prevent it from entangling the bait in underwater vegetation. If the bottom is bad, then you should be prepared for the fish to be restless. It will actively tangle the line, dive sharply into the depths - making candles, and can wrap the tackle around the pole, therefore, pull out the entire structure.

How to wind fishing line onto the reel of a trimmer, mower, or lawn mower: video

Properly wound fishing line on the trimmer reel
A trimmer, mower or brush cutter works the same way as a fishing rod using fishing line thread. Only in a spinning rod is a line rope needed to cast the rod, but in a trimmer it is needed to cut off the greens. How to wind fishing line onto the reel of a trimmer, mower, or lawn mower? Here are the steps:

Remove the spool from the spool box.
The single-barrel reel has markings in the form of pointing arrows. They show the winding side, you will need 2 to 5 m of fishing line.
For a trimmer head with two whiskers, you will need from 1.5 to 3 m. Wind the line wire in the opposite direction of rotation of the head.
The trimmer head with auto-threading line rope is easy to thread: thread it correctly and secure the ends. The tool will automatically wind, you just need to turn it on.

Options for winding fishing line on a spinning reel

There are many reels on the fishing market today, and each individual model has its own spool profile. It can be cylindrical, trapezoidal or chaotic. Let's look at each in more detail:

Most spinning anglers use spinning reels with cylindrical winding or a slight reverse cone.

. A set may contain several washers, all of different thicknesses. By reducing their total thickness, the winding is changed towards a reverse cone, and increasing the thickness gives it the shape of a straight cone. Sometimes there are no washers in the box. This means that the manufacturer has already installed them, so in order to adjust the winding profile to suit you, you will have to remove the spool.

In rear drag reels, the washers are most often installed in the spool itself. The same principle applies here, only in reverse. To obtain a reverse cone shape, the thickness of the washers is increased, and for winding with a straight cone, it is reduced.

Remove the line completely from the spool. You don't have to touch the backing.
Dry the wood thoroughly. In this case, a regular hairdryer will be very useful.

An important condition for long-term use of scaffolding is proper storage. Caring for the forest is necessary both after each fishing trip and during the off-season.

When preserving a coil for the winter, you must:

Remove the line completely from the spool. You don't have to touch the backing.
Dry the wood thoroughly. In this case, a regular hairdryer will be very useful.

After each fishing, it is not necessary to dry the entire length of the line; it is enough to process the segment of maximum casting.

Finally, a few tips to help you wind the fishing line perfectly:

In expensive reels, some manufacturers have a special recess on the working surface of the spool, where you can easily hook the cord and continue winding. But this is the exception rather than the rule, because most models do not have this option, so you will have to tie it the old fashioned way. Yes, so that the braid does not slip, but holds relatively tightly. Perhaps this is the only requirement for the node.