Catching crucian carp with an elastic band in spring and summer: pros and cons

Many fishermen claim that catching crucian carp with an elastic band is a real pleasure. This method does not require any expensive materials. The method allows you to catch fairly large specimens of fish by feeding the bait quietly and carefully. The simplicity of the technique allows you to get a large catch in a short time. However, first you need to choose the right fishing location, install the tackle correctly and accurately throw the bait.

Pros and cons of fishing with an elastic band

The method has its advantages and disadvantages. Knowing them, you can understand in which case it is better to use it.

Advantages:

Possibility of fishing at a fairly large distance from the shore.
The design of the tackle minimizes the fish falling off the hook and going into the reeds.
All-weather - the quality of fishing is not affected by wind and rain, which cannot be said about float gear.
Careful, quiet casting of the bait practically does not scare the fish.
The bait is delivered exactly to the feeding area.
The sensitivity of the method allows you to notice the bite of fish of different sizes. Donka with an elastic band has good sensitivity.
The presence of several hooks on the tackle increases the likelihood of a good bite.
The design of the gear minimizes the likelihood of entanglement.
Compactness - the tackle easily fits into a regular backpack.

Flaws:

Low applicability in overgrown areas
High probability of getting caught in floating debris
Difficulty of casting tackle from the shore for beginners
Low catch in areas with strong currents.

How to catch crucian carp with an elastic band

The technology of fishing with an elastic band is considered one of the most productive and efficient. At one time, in the midst of a decent bite, you can catch several pretty good fish.

Did you know? The largest sea fish that was caught with a fishing rod was a white shark, weighing 1208 kg. It was caught in 1959 off the southern coast of the Australian continent.

The method of catching crucian carp with tackle from the shore is simple and is based on several actions:

The tackle is unwound on the shore, and a load is attached to the elastic band using a nylon cord.
Using your hands, you throw the load as far as possible into the pond, while holding on to the cord and not the rubber shock absorber. If possible, the cargo is delivered to the desired location using an inflatable rubber boat.
Leashes and hooks are installed on the main line.
Bait is placed on each of the hooks.
The donk is sent into the depths of the reservoir using a rubber shock absorber.
Make a slight tension on the fishing line and place a bite signaling device.
When the alarm goes off, they make hooks and pull out the fish.

The most difficult part of the fishing process is considered to be high-quality casting of the donkey and its retrieval. Without certain skills, it will be difficult to throw the elastic band far the first time, and without even tangling it. However, if everything goes right, further fishing will be as simple and exciting as possible.

Choosing a place to fish with an elastic band

Arriving at a large body of water, many fishermen are faced with the problem of where to get the “elastic band”. It turns out that choosing a place is not so difficult. To do this, you just need to use three simple rules.

Firstly, the location from the shore should be comfortable. These can be prepared sites or nickels of a flat bank. The main thing is without gullies or cliffs. The site must be cleared of tall grass and bushes. Usually a clearing 8-10 m in size from the water's edge is enough. If there is no site, prepare it yourself by crushing the grass and cutting down the bushes.
Secondly, it is necessary to take into account the topography of the bottom of the reservoir. To fish with a rubber band, you need to choose a place with a smooth decline of the bottom from the coastline. Crucian carp, especially large ones, rarely go into shallow water, so the depth at the bait location should be 2-6 meters. If there are sharp dips at the bottom of the reservoir, they try to throw a “rubber band” sinker at the beginning of the rise of the bank from the opposite side of the hole. Thus, the rubber band route will be located above the gap. This option also allows you to catch crucian carp near the reeds.
Thirdly, you should definitely take into account the presence of a current. Although the bait of the tackle itself, thanks to the heavy sinker, moves slightly from the casting point in strong currents, the feeding spot is washed out very much. Therefore, it is necessary to either choose areas with calm water, or often adjust the position of the sinker taking into account the blurring of the bait.

How is the fishing going?

Catching crucian carp with a rubber band is very interesting, but at the same time a little stressful, because you need to always stay on your toes.

In addition, in order for fishing to be successful, you need to know the following rules:

An elastic band is a kind of modification of a throw. True, the first has the advantage that you do not need to make multiple casts every time you want to replace the nozzle. The tackle will be delivered to the fishing site with an elastic band.
To cast, you need to find a place where there are no bushes or grass.
After selecting a “parking spot,” you will need to carefully unwind the homemade fishing rod from the reel, and then lay it in rings on the ground. Next, you should make a fairly wide swing, and after that, send the load into the river. If, when unwinding the tackle, the fishing line with hooks remains lying on the shore or goes far away, it is necessary to cast again, because there will be no sense in such fishing. If everything is in order with the fishing line, but it is not in a taut state, then it is recommended to wind the unnecessary amount on the reel.
At the next stage, the reel is attached to a pin or fishing rod.

How to throw (start) a donk with an elastic band

The easiest way to install gear is to cast a sinker from the shore. If the depth and temperature of the water in the reservoir allow, do this from small shallow water. Before casting, the first thing to check is the integrity of the equipment, the absence of tangled areas, damage, and the reliability of fixation of the sinker and hooks. The length of the leashes and the distance between them should be such that they cannot intertwine with each other. Then the tackle is carefully laid out on the shore so that when casting, the fishing line does not intertwine with each other and does not catch on the grass. There is no need to put on bait when casting. If the cast is successful, this can be done using an elastic band.

Having prepared the tackle, you should place the load in the right place. This is done by unwinding it or gradually swinging it on a rubber cord. An alternative method is to try throwing the sinker with a simple sharp throw with your hand. In this case, the flight range will depend on its mass, shape and throw force. To signal a bite at the end of the tackle, you need to attach a guard to the fishing line. Once the gear is installed, you can begin to attach the bait.

What is a rubber band for crucian carp?

There are no particularly complex components in equipment such as an elastic band. This equipment is quite simple both in its composition and in its handling. This tackle is based on a sinker to which an elastic band is attached; the elastic band itself should stretch quite well.

The fishing line is attached to this elastic band, and leashes with hooks are attached to the fishing line itself. The places where the fishing line and elastic band are secured, sinkers and elastic bands should be connected using swivels so that there are no breaks. Previously, instead of swivels, ordinary pieces of wood were used, in which holes were made, and the fishing line and elastic band were secured to each other.

Some fishermen attach a short stick or a regular reel to the free end of the fishing line to make it easier to reel in the fishing line when pulling it out. Fishing stores sell both ready-made rubber bands for crucian carp and each element of this equipment separately. Many fishermen prefer to make this equipment with their own hands, which is not difficult and does not require any special knowledge.

Nozzle for catching crucian carp

Rolls of bread crumb have proven to be a good bait for catching crucian carp. You can use white or black bread. Many fishermen note that the effectiveness of biting increases if you add butter and cheese. Also, crucian carp bite perfectly on balls of sour dough. Popular baits are boiled grains of corn, pearl barley, and wheat.

If the crucian carp is not too hungry, the fish may react sluggishly to baits. In this case, it is worth switching to bait. You can determine the moment when the fish begins to dig into the mud and air bubbles rise to the surface.

How to create tackle with your own hands

It is best to start manufacturing with a load. There are anglers who use a magnet from a transformer, although a regular lead weight weighing 200 grams or more would be an excellent option.

The most important thing is that this element weighs a lot. Otherwise, when replacing the nozzle, it will begin to move, which will indicate poor quality of the component.

At the same time, you need to make sure that the weight is not heavy, because somehow it will need to be pulled out from the shore.

Some fishermen use a railroad spike. It is good because when it sinks to the bottom, it clings to it with its “hat”. In addition, it is quite easy to hold in your hand. If this is how the load is used, then the elastic band in this case clings directly to the “hat”. If you cannot find anything suitable, do not despair, because there is a way out of the situation. You need to take a regular plastic bottle and fill it with pebbles or something similar to make the element a little heavier. Considering that there are plenty of these bottles everywhere, it will be possible to clean up nature a little and find a suitable part for yourself.

After the important component has been found, you can continue to make the tackle with your own hands.

Everything is done like this:

The elastic band should be tied to the load

As for the size, it is calculated based on the fact that the length will increase several times when stretched, so you should not take large elements, otherwise it will no longer be an elastic band, but a thread. It is important to make sure that the two components are well tied; if this is not the case, the weight will remain at the bottom and the elastic will return back. If the load has edges, it is recommended to tie the elastic band through ropes or something similar so that the main element does not fray, since then it will have to be changed regularly. At the other end of the elastic you need to make a loop and tie the main fishing line to it

As for its cross-section, it depends directly on the type of fish. If you plan to fish for small prey, then the diameter of the thread can be thin. With large specimens, the fishing line for crucian carp needs a denser one. After this, leashes and hooks are tied to the main line. If the fisherman knows for sure that there are big fish in the river, then it is better that the leashes are the same diameter as the main fish. In this case there is no point in taking a smaller line. We need to say a few words about hooks. They sometimes get stuck during work and transportation. And in order to avoid this, you need to attach pieces of insulation or cambrics to the fishing line (where the hooks are threaded). The free end of the line is tied to a reel or fishing rod.

Bait and fishing technique

It is almost impossible to predict in advance what the fish will bite on. Crucian carp are often too capricious and completely refuse plant foods. In this case, the presence of bait will save the situation. Traditional baits of this kind are:

worm (dung worm, earth worm, crawling worm)
maggots
bloodworm
beetles
larvae (butterflies, dragonflies)

For successful fishing, it is recommended to have 2-3 types of bait. Many anglers combine baits and baits, thereby increasing the chances of success.

The tactics for catching crucian carp are as follows. The bait is attached to the hooks, the fishing line is gradually released and the tackle returns to working condition. The moment the fish bites will be indicated by a guard and a slightly stretched fishing line. The nature of the crucian's bite is such that at first it takes a closer look at the bait and bites it lightly. During this time the signal will be weak. Then the fish takes the bait completely, the bell signal becomes noticeably stronger. At this moment it is necessary to hook the prey. The hook should be sharp and short. The fish is pulled ashore, the catch is removed and the bait is prepared for the next run.

When fishing for crucian carp, do not forget about the bait, periodically throwing it to the location of the sinker.

After successful fishing, you need to somehow get the rubber band back.
Often, when rolling up the tackle, it may turn out that the load has gone into the mud and gotten caught. A simple piece of advice will help you avoid losses. To pull out the tackle, collect the fishing line up to the elastic band on the reels. Then they raise the elastic band as high as possible, for example, by standing on a small ledge on the shore, and begin to pull the load. At first they pull slowly and carefully. As soon as it is felt that the load has come off the bottom, the tackle is pulled out faster so that the sinker floats rather than drags along the bottom. Article on the topic: Bait for crucian carp

Crucian carp in October on a float rod

, crucian carp The most popular is the Bolognese fishing rod. The length of the rod is selected taking into account the characteristics of fishing. The 2.7 m long rod is successfully used for fishing in any conditions. In October, it is undesirable to use a sub-sink, but a single sinker should be used in accordance with the load-carrying capacity of the float. The main thing is to figure out how to tie the sinker to the fishing line. It is advisable to use leashes 20-30 cm long.

Bait for crucian carp in October

When fishing for crucian carp at any time of the year, it is important to use appropriate complementary foods. It is better to prepare bait for crucian carp at home, taking into account the characteristics of a particular reservoir. During the flow, slowly dissolving ingredients are suitable. Sometimes it is enough to use several slowly dissolving cake briquettes.

You can attract fish to the fishing site by mixing various plant ingredients (breadcrumbs, steamed cereals) with chopped worms or small food bloodworms.

The hook is baited with traditional bait: maggot, bloodworm, worm, caddis larva. You should not exclude plant attachments from your arsenal. It is impossible to predict the taste preferences of crucian carp in October. It happens that in the same place under the same weather conditions on the next day of fishing, you can get a result that differs in effectiveness.