What is the difference between a feeder and a spinning rod?

On many reservoirs, feeder fishing is the most common type of recreational fishing, but what is the difference between a feeder and a spinning rod? Often this is the only way to catch big fish at certain times of the year. And that’s when adherents of other types of fishing, for example, spinning anglers who decide to try their hand at feeder fishing, have some questions. They are puzzled by the following nuances: is it possible to make a feeder from a spinning rod? It will be useful for these spinners and just beginning anglers to know the answers.

What is a feeder and how does it differ from a spinning rod?

A feeder is a tackle for active bottom fishing; it always comes with a sinker feeder, hence the name. If you translate the Russian word feeder into English, you get feeder. This type of tackle is also called English style because it was invented in Great Britain in the fifties of the last century. Externally, the feeder is very similar to a spinning rod. Like a spinning rod, a feeder rod can be either telescopic or plug-in, and is also equipped with a reel, usually a spinning rod.

Feeder gear differs from spinning rod in that it has a much larger number of throughput rings. Another difference is that the signal about a bite on the feeder is transmitted to the tip of the rod, and not to the hand, as when casting with a spinning rod. As a rule, a good feeder rod is equipped with a set of replaceable signaling tips. Due to its design features, a feeder rod is a little heavier than a spinning rod, which is not at all its disadvantage, because the fisherman, after casting, places the feeder on a special stand, and does not leave it in his hands, as a spinner does.

The length of the feeder rod varies from three to four and a half meters. Here is the first piece of advice on how to choose a feeder rod: if it is impossible to cast long distances in your pond, then you should not acquire very long tackle.

So, the components of the feeder:

rod;
elastic tip-signaler;
spinning reel;
fishing line;
hook;
feeder

If you plan to cast at a distance of no more than 30 meters, then it is enough to purchase a feeder rod three meters long.

Feeder reel for feeder fishing

First you need to understand that feeder fishing is different from spinning fishing. It uses a donka fishing rod with special bait. The feeder rod should have the most flexible top of the tackle, which will respond properly to bites. The rod is also equipped with a large number of rings, and all the upper parts of the gear are removable. This significantly increases sensitivity during bites. There is also a special feeder used specifically for feeder fishing, a fishing hook and a reel.

Feeder reel

From the above it should be clear that feeder fishing has its own specifics , which is reflected in the equipment. For the feeder, you can use any coils. It depends on the choice of the fisherman himself. However, the most practical and suitable for this type of fishing are spinning reels. Or rather, match inertialess reels. Their main difference from simple analog spinning reels is the presence of several spare spools that have a low level of depth and an improved transmission link mechanism. The fact is that feeder fishing involves the use of thin line. Namely, shallow spools simply do not allow the last one to fall between the skeins of unwound tackle. Thus, the convenience of the process itself is increased, where there is no need to be distracted by correcting possible problems.

Feeder reel for fishing

Also, the feeder coil is predominantly metal . This type of fishing is characterized by high dynamics, so the reel will be under constant loads of varying strength. A high-quality, reliable, well-built reel will last much longer than cheaper options that can break while fishing.

Expensive feeder reels are equipped with a baitrunner system , which allows you to almost instantly switch the friction brake from the minimum position to a full operating mode. Using the minimum position, the fisherman can calmly cast off the line, and returning to the operating mode allows you to quickly take control of new circumstances of the process - after all, large representatives are also suitable for small fish. This is how this system works, allowing you to completely control the fishing process. For feeder fishing, reels with a baitrunner system are recommended.

Modern feeder reel

Feeder fishing technology

The first stage of feeder fishing consists of feeding:

in order to bait one place, fishermen use an object on the opposite bank, for example, a tree, as a guide;
fill the feeder with food and throw it at the point where you will fish;
after the feeder splashes down, you must immediately close the line guide and clamp the line with a clip (thus, the next throw will be the same length as the previous one);
after the bait feeder reaches the bottom (the tension of the fishing line disappears), you need to make a sharp jerk so that the feeder pours its contents onto the bottom. We take out the feeder.

In order to properly feed the future fishing spot, you will need to make about ten such casts.

After feeding, we begin the fishing itself:

attach a leash with a hook;
we put a worm or maggot on the hook (there may be options);
we cast to the baited area;
If the tip signals a bite, then we hook and pull out the caught fish.

Is it possible to use a spinning rod as a feeder?

Sometimes it happens like this: a spinner comes to catch predators on a pond, hour after hour the fisherman walks along the surface of the water, makes casts, but the pike and perch do not see the spinner at point-blank range. It would be possible to switch to fishing for bream, roach and other minnows, but in the trunk of the car there is no appropriate gear for catching such fish. In such a situation, fishermen often wonder: is it possible to use a spinning rod to act as a feeder, that is, to make the spinning rod temporarily serve to catch white fish, since predators refuse to be hooked by the spoon.

Of course, in order to use a spinning rod for a feeder, you still need to have some parts of the feeder equipment included:

feeder;
leashes with hooks.

Experienced fishermen say that without making any changes to the design of the spinning rod with your own hands, you will not catch many white fish: the spinning rod is not suitable for catching small white fish - the sensitivity of the tip of the spinning rod is low.

One of the anglers advises making some changes to the design of the spinning rod so that it can serve as both a feeder and a spinning rod. To do this, you need to find a telescopic antenna, cut off a piece of tube from it with a diameter of four millimeters and a length of twenty to thirty millimeters.

We wind it to the top of the spinning rod, fill the winding with epoxy. We buy a fishing rod tip at the store. We shorten the purchase to twenty-five centimeters, the resulting tip should fit tightly into the wound tube. We process the tip of the tip with sandpaper until we achieve the desired sensitivity. We attach a tulip to the tip of the top; you can put an intermediate passage ring. We insert our product into the tube. That's it, we made it with our own hands so that we got a universal tackle that can be used as a feeder. It will be better if you make a set of tips with very different sensitivity with your own hands.

So, in order to use a spinning rod as a feeder, we need:

a tube from a telescopic antenna (you can choose another tube, as long as it is light);
replaceable tips from a float rod;
winding material;
epoxy resin;
sandpaper;
tulip and access ring.

Still, the spinning rod and the feeder have a different structure and test. Let this be the default option if you come fishing to catch a predator, but it refuses to be caught.

Experienced fishermen claim that it is almost impossible to convert a spinning rod into a real high-quality feeder rod that will serve its owner for a long time. According to fishermen, it would be better to think about how to make a feeder with your own hands from scratch than to remake a spinning rod. Anglers with experience advise beginners and not only them, but also their other colleagues: let them choose a high-quality feeder rod in the store (even if at first it costs a budget), rather than bother with altering the spinning rod.

High-quality feeder rods are quite expensive in price, but using an expensive, high-quality rod does not bring trouble when fishing, as experienced fishermen have seen more than once. Cheap fakes often break. If the buyer’s budget allows for buying a high-quality feeder, then it is better not to go cheap, but to buy decent equipment.

Source: orybalke.com

What is spinning?

Spinning is the best option for successfully catching fish, especially predatory ones. But in order for there to really be success, spinning requires a certain amount of knowledge and practical skills . It is optimal if, with the purchase of your first spinning rod, you receive information support from a more knowledgeable and experienced fisherman. Further, it is quite possible to “upgrade” the gear independently, without outside help, but basic knowledge is required.

Before you go to a specialized store to make a purchase, you need to delve into the theoretical part and description of the spinning rod itself. It is necessary to understand the principle of its operation, its possible varieties, and study the technologies that are often present in the production process.

Depending on the design, the spinning rod can be telescopic or plug-in. Telescopic rods are better suited for beginner fishermen because they:

Significantly cheaper than the plug version.
Lungs.
Less bulky.
Folds up great.
Much more convenient than plug-in ones during operation.

Those who already have significant experience in fishing choose models like feeder gear for the following reasons:

There is no significant weight at the docking point.
Excellent elasticity indicators.
High degree of sensitivity.
Individual placement of rings.

Depending on the material from which the tackle is made, spinning rods come from:

Composite.
Fiberglass.
Carbon fiber.

There is also a rod construction parameter. It implies the degree of response to external actions. The structure can be:

Slow (the whole rod bends)
Medium (half of the rod bends)
Fast (top bends)

In order to choose the best option, you must first of all have the necessary amount of information and understand the purpose of purchasing gear.

What is a feeder rod?

A type and optimized bottom tackle is considered to be a feeder rod. The main features of the feeder are the presence of a sensitive tip, which instantly reacts to a bite. There is a feeder classification:

Easy class.
Middle class. The most popular one is used by professional fishermen and is suitable for beginners.
Hard class.
Ultralight class (picker).
Super heavy class (for fishing in difficult conditions).

Like a spinning rod, a feeder rod is characterized by test indicators . You should not deviate from the test parameters when choosing a form. It is better not to reach the maximum indicator with a margin of 10 g. The feeder rod visually consists of three or four components, and can reach up to 4 meters in length. The tip is always marked with a bright color to attract fish and increase the bite. The length is chosen depending on the place of fishing. The longest ones are designed for fishing in reservoirs or deep and large lakes. For shallow rivers, three-meter feeders are suitable.

How to choose a feeder rod

Before you go to the store to buy a feeder rod, you should answer a few simple but important questions.
If this is your first experience, then it is better to opt for an inexpensive universal “stick”. As the angler gets to know the gear, he will have specific requirements for the rod. When casting equipment long distances, when fishing in the current, a feeder of greater length and test is required. You also need to take into account the size of the intended trophy. For example, to catch crucian carp in a pond, a more delicate rod is required than when fishing for carp and carp.

It is important for the fisherman to take into account the number of trips to the reservoir. It’s one thing when a person goes fishing 2-3 times a year, and the rest of the time an expensive fishing rod gathers dust in the closet. But if an angler spends every weekend or entire vacation on a river or lake, then the use of a professional feeder rod is justified.

The main parameters that characterize the feeder rod are:

Rod test

Each rod is designed for specific fishing conditions. In order to optimally use the properties of the feeder, the weight of the thrown load is indicated on the form of the rod or there is an inscription that indicates the maximum loads.

The inscription Light means that the rod is light, it can cast equipment weighing up to 30 g;
Medium-Light speaks of using feeders weighing up to 60 g;
Medium – from 60 to 80 g;
Medium-Heavy – from 80 to 100 g;
Heavy – from 100 to 120 g;
Extra-Heavy – over 120 g.

Using feeders with lighter weights will negatively affect the sensitivity of the feeder, and exceeding the test limit increases the likelihood of rod breakage.

Rod length

Currently, rods are produced with lengths from 2.7 to 4.8 m in increments of 0.3 m. Some English models have their own length scale.

The most common are feeders with a length of 3.6 to 3.9 m. Such fishing rods are convenient for casting rigs over long distances.

In addition, these rods give you complete control over your rig. To cast bait over long distances, a rod more than 4 m long is required.

In some models of feeder rods, it is possible to increase the length due to an additional elbow. Thus, the angler will actually have two fishing rods of different lengths.

Rod material

Feeder rods are made from three main materials:

carbon fiber;
fiberglass;
composite (a mixture of “glass” and “coal”).

What is the difference between a spinning rod and a feeder rod?

Feeder and spinning rods are designed for catching fish; they have the same purpose. But, there are significant differences in the methodology and area of their use. Feeder rods and spinning rods are designed for completely different types of fishing. Feeder, after casting you can put it on the stand and wait for a bite. The spinning rod must be held in your hands at all times.

A feeder rod is much heavier and longer than a spinning rod. In addition, fishing with a spinning rod is much more active than when using a feeder. You can change the tips on the feeder, which indicate flexibility and the degree of bite; the spinning rod has no removable parts. What type of gear to choose is a purely individual question, which depends on preferences, type of fish, type of water body and financial capabilities.

Source: vchemraznica.ru

Is there a significant difference between a spinning rod and a feeder?

Both the spinning rod and the feeder are designed equally for successfully catching fish, especially predatory ones. In order for it to be successful, you must have some knowledge and practical skills in this gear.

When purchasing a spinning rod, you do not need to deviate from these parameters. When planning a spinning fishing trip with a feeder, you need to choose a spinning rod with a safety margin. This gear is designed for fishing from the bottom.

Build

Both spinning rods and feeder forms have their own structure. The longer the whip, the higher the action indicator. These rods are suitable for long casting on lakes.

Feeders are also distinguished by a large number of passage rings; they provide the load evenly along the entire length of the form.

How can you understand on the shore what is the difference between a spinning rod and a feeder?

Nothing could be simpler. When fishing with a feeder, the angler sits proudly near the feeder and looks at its tip. The feeder is located parallel or perpendicular to the shore and has a curved tip. The spinning player is in constant motion, without letting go of the spinning rod, casting, retrieving, casting, etc.

Naturally, there are differences in equipment.

In the case of a feeder, this is a feeder and bait or attachment. The spinning rod usually has artificial baits - a spinner, a wobbler.

It is also very easy to distinguish a feeder from a carp spinning rod.

A carp spinning rod is a heavy tool with a lot of dough, while a feeder, in comparison, is a delicate tool with thin tackle.

These are the answers to the question of how a spinning rod differs from a feeder. In fact, it is elementary, you just need to see the difference.

Source: ribalka-na-dnestre.com

Choosing a spinning rod for a feeder

Along with classic spinning fishing, feeder spinning fishing is gaining popularity.

Translated from English, “feeder” means “feeder.” This idea originated in England. Simply put, food is served to the fish in a special feeder. And there the hooks with attachments are already waiting. A modern version of fishing with a feeder is called quivertip. Only special blanks are used, match ones with a very sensitive tip. The latter plays the role of a bite alarm.

There are differences between spinning and feeder forms. Although these differences do not prevent you from fishing with a spinning rod as a feeder, or with a feeder as a spinning rod.

In a spinning rod, the strength and elasticity of the rod should exceed that of float rods. A simple spinning cast is sometimes on the verge of the strength of the tackle material.

Modern rods for spinning tackle are made of carbon fiber and carbon fiber with the addition of boron fibers, which create additional flexibility. The most common products now are made from multilayer composite with the addition of graphite. They have the inscription "CARBON" on them.

Features of a spinning reel

Spinning fishing has significant differences from feeder fishing. It is because of this that there is a certain difference in the equipment and features of different parts. And although spinning fishing also requires a rod, line, hook, bait and reel, they have their own characteristics stemming from the process itself.

Spinning reel

Spinning fishing involves a much larger number of bait casts than during feeder fishing. Therefore, most spinning reels are lightweight. In other words, the models are made of lightweight, but not always durable materials. Of course, more expensive options are constructed from light and durable metals, but not everyone can afford them. For spinning fishing, the following types of reels are used: inertia, inertia-free, multiplier.

The inertial reel is the oldest model and consists of a drum on which the line is wound, a handle and a simple mechanism. Some “advanced” models are equipped with a special braking device, which can significantly reduce the risk of “beard” formation or tangling of the line when casting.

Inertia coil

A multiplier reel is an improved modification of an inertial reel. It is designed for using relatively heavy bait and catching larger fish.

Multiplier reel

The most common model and frequent choice of novice fishermen is the spinning reel . It is easy to use and low maintenance. Inertialess reels differ in strength and size range. The structure of a spinning spinning reel is very similar to a feeder reel (the operating principle is identical), but it has its own characteristics. It is lighter because it is designed for multiple casts and has a spool that allows you to use fishing lines of different thicknesses.

These reels are usually smoother in appearance. This allows you to cast over longer distances. The handle for winding the line should have a smooth movement and eliminate backlash. The braking system must work flawlessly, otherwise you could lose a big fish.

Spinning reel

What is the difference between a feeder and a spinning rod:

The feeder rod is quite long, up to 4.5 meters and heavier than the spinning rod. It is used for bottom fishing; after casting, it is fixed in the stand. The spinning rod is held in the hands and the reel is constantly rotated. The length of the feeder is an important indicator; it determines the casting of the feeder over a long distance.
Feeder forms have the same indicators as spinning forms: test, action, length. They show the weight of the bait, which can be cast without fear of breaking the tip. The structure of the whip is characterized by its convexity under load;
Spinning rods are much shorter than feeder rods. This was done for ease of throwing. Spinning fishing is active; you have to cast baits of different weights hundreds of times. With a short whip, the angler will not get so tired.
An important difference between a spinning rod and a feeder is the presence of a tip on the latter. The fisherman feels the bite, this is not the case with a spinning rod. There, holding the fishing rod constantly in his hands, the angler hears the fish hitting the bait.

Vershinki

Special mention must be made about the top. Its sensitivity is measured in ounces. The ounces indicate how hard you need to press the tip of the tip to bend it 90 degrees. The toughest are the 6-ounce ones.

The tips are divided into three degrees of hardness.

Soft - used in standing water;
Medium - for fishing in small currents, or in windy weather;
Hard - used on rivers with strong currents.

The tips do not take part in the throwing process; they transfer the weight of the load to the form. When choosing a tip, you should know the speed of the current and the weight of the feeder being thrown.

In addition to these differences, there are also great similarities between spinning and feeder rods. This concerns the material of manufacture: they are all made of fiberglass and carbon fiber. Composite materials (graphite and fiberglass) are also used. And the most modern materials for the manufacture of spinning and feeder rods are carbon.

For successful feeder fishing, an angler must know all the accessories for such fishing. Feeders can be factory-made or home-made. Its role is to deliver food to the place where the fish are located. It is both a bait for bottom inhabitants and a place for them to feed.

Which spinning rod with feeder to choose?

The design of the spinning rod itself has not changed for many years.
Its basis is a form. This is not a simple whip, but a specially made factory rod made from special modern materials. Equipped with a handle, a reel for fishing line, and guide rings. All this is completed with fishing line, leash and artificial bait.

Spinning rods for feeder fishing are usually longer and heavier than those used for traditional fishing.

Choosing a spinning rod for a feeder

Along with classic spinning fishing, feeder spinning fishing is gaining popularity.

Translated from English, “feeder” means “feeder.” This idea originated in England. Simply put, food is served to the fish in a special feeder. And there the hooks with attachments are already waiting. A modern version of fishing with a feeder is called quivertip. Only special blanks are used, match ones with a very sensitive tip. The latter plays the role of a bite alarm.

There are differences between spinning and feeder forms. Although these differences do not prevent you from fishing with a spinning rod as a feeder, or with a feeder as a spinning rod.

In a spinning rod, the strength and elasticity of the rod should exceed that of float rods. A simple spinning cast is sometimes on the verge of the strength of the tackle material.

Spinning rods are conventionally divided into classes:

First class - light, length up to 214 cm, casting bait up to 15 g;
Second class - medium, length up to 240 cm, bait weight up to 30 grams;
Third class - hard, length up to 275 cm, bait up to 60 g;
Fourth class - very hard, length up to 320 cm, casting bait more than 60 g.

What is the difference between a feeder and a spinning rod:

The feeder rod is quite long, up to 4.5 meters and heavier than the spinning rod. It is used for bottom fishing; after casting, it is fixed in the stand. The spinning rod is held in the hands and the reel is constantly rotated. The length of the feeder is an important indicator; it determines the casting of the feeder over a long distance.
Feeder forms have the same indicators as spinning forms: test, action, length. They show the weight of the bait, which can be cast without fear of breaking the tip. The structure of the whip is characterized by its convexity under load;
Spinning rods are much shorter than feeder rods. This was done for ease of throwing. Spinning fishing is active; you have to cast baits of different weights hundreds of times. With a short whip, the angler will not get so tired.
An important difference between a spinning rod and a feeder is the presence of a tip on the latter. The fisherman feels the bite, this is not the case with a spinning rod. There, holding the fishing rod constantly in his hands, the angler hears the fish hitting the bait.

Vershinki

The tips are divided into three degrees of hardness.

Soft - used in standing water;
Medium - for fishing in small currents, or in windy weather;
Hard - used on rivers with strong currents.

For successful feeder fishing, an angler must know all the accessories for such fishing. Feeders can be factory-made or home-made. Its role is to deliver food to the place where the fish are located. It is both a bait for bottom inhabitants and a place for them to feed.

Which feeder to choose?

Bait - for primary feeding of fish, attracting them to the fishing spot. Holds a large volume of feed, has large holes for its quickest rinsing;
Feeder for long-distance casting - similar to a badminton shuttlecock, good for casting to the right place;
Supplementary feeding - good in still water and in currents, has different cells for slowly washing out the feed. Its task is to keep the fish in one place for a long time.

Choice of bait

The success of feeder fishing depends on well-chosen bait. The bait is based on various cereals and cakes. They also add aromas and worms. Each fisherman has his own secrets for preparing bait.

The feeder is filled at the fishing site and always with fresh food. An exception may be fishing for carp, which is called “water pig” because of its omnivorous nature. Throw a feeder with hooks attached to it to a possible location of fish. Fixed on a stand at an angle to the plane of the water. This makes it more convenient to watch the moment of the bite.

One of the disadvantages of feeder fishing is frequent baiting. This reduces the actual fishing time. To solve this problem, feed is delivered in another way (by hand, slingshot).

It became possible to use a form without a feeder, with a lighter structure. This is how light-weight picker rods with large dough appeared. There was also a spinning rod here.

Picker from a spinning rod has become available to many homemade fishermen.