Features of fishing with a float rod with a feeder and making your own tackle

Types of bait for a float rod with a feeder

Complementary foods are used depending on the type of reservoir.

It is divided into 3 varieties:

1. Open. Here the feeder needs to be thrown into standing water and shaken with the filling. The bait will spread around the feeder. Here you need to quickly reel in the line and hook and direct them into the middle of the floating bait.
2. Closed. This variety is used in small currents with bait in the form of worms or bloodworms, which will move quickly in the water and attract the attention of the fish.
3. Spiral. This variety is universal. It is used in calm water, as well as in small currents. This feeder with a float is a sliding one and is very simply and conveniently attached to the fishing line. One of the negative factors here is the problem of the leash getting caught. This can be circumvented by knowing the mounting patterns.

This feeder with a float is of the loaded type. The main weighting agent is lead. They are used for fishing in deep water bodies. There is not much noise created here that could scare away the fish.

Let's celebrate! Since a large impact on the water creates strong noise vibrations, and there is also a risk of complementary food being thrown into the water.
The feeder is an excellent means of delivering food to great depths, where it will be easier for the fish to navigate.

Installation of gear

After installing the reel, a fishing line is attached to it and wound, then threaded through the rings of all legs of the rod. All that remains is to secure the feeder and hook.

There are two options for equipping a donkey with a feeder: sliding and blind. With a sliding rig, the line is threaded through the axial tube, the eye of the bracket or the anti-twist.

Advantages of the option:

• the feeder and the nozzle do not come into contact during casting;
• prevents twisting of the tackle;
• When biting, the line slides in the tube or bracket.

When making a tube with an anti-twist, be sure to put on a cambric where the metal touches the plastic so that the latter is not squeezed

A more complex method of fastening is paternoster:

1. At the end of the fishing line, a loop is tied using a 3-4-fold surgical knot - 3-4 turns of the fishing line are made inside the loop, in contrast to a single knot, so that the knot does not float under load.
2. After 20 cm, a similar loop is knitted to attach the feeder, which should go into this loop.

It is better not to use a long leash for standing water.

The distance of 20 cm is not fixed, it depends on the fishing conditions: the closer the hook is to the feeder, the faster the fish will find the bait in still water. During the current the situation is different.

The Gardner loop guarantees excellent bite and hook sensitivity

A popular type of fastening is called a Gardner loop. It differs in that before creating a loop, a swivel is put on the fishing line.

When fishing with long casts or in high currents, you can add a sinker in front of the leash, but then the bait quickly sinks to the bottom, which looks unnatural. In some cases, it will be important to limit the movement space of the feeder using cambrics or sinkers.

How to make a float rod with a feeder?

You can make this fishing tackle yourself. Moreover, it is possible to make it more resistant to currents or other water obstacles.

It’s easy and simple to do, and the end result is a mini-feeder:

1. You will need 1 wooden stick (can be used for sushi), which can be painted with water-based paint or black varnish;
2. Then you can cut a strip 1 centimeter wide from any plastic bottle;
3. You need to pierce 7 holes in it with a distance of 1 centimeter;
4. You need to insert a wooden stick into the hole located in the very middle;
5. One side of the plastic tape needs to be sealed with glue on one end of the stick;
6. Both ends must be equipped with nipples, and the fishing line must be passed through them between the sinker and the float.

Effective baits

Fishing for peaceful fish is impossible without bait. She gets attention. The mixture should consist of light components and should be washed out for 5 minutes.

Important: The bait should consist of finely ground cake, breadcrumbs, and boiled millet. When lightly pressed, it disintegrates and does not stick together into one lump when it gets into water.

A proven bait recipe that will allow you to effectively catch roach and crucian carp:

• fresh finely ground cake – 300 grams;
• breadcrumbs – 500 gr.;
• crushed biscuit cookies – 200 gr.;
• boiled millet – 300 gr.;
• anise flavor (sprayed during each cast)

What does this bait give? First of all, it dusts well. Within 4-5 minutes it is completely washed out of the feeder. After 10 casts, a stable column of mixture forms in the water, which collects a decent school of fish. Coconut shavings give a good effect. It is very light and when it gets into the water it forms a very noticeable path. The fish use it to find the feeder and bait.

Instead of cake, it is effective to use roasted seeds crushed in a coffee grinder. They give the mixture a very rich aroma. In the fishing zone, white bream, small roach and crucian carp will gather. The bites will become more obvious and their execution will be good.

Any bait for feeder fishing for roach, crucian carp and bream is suitable as a base for the bait mixture. It should be fine-grained, with a high content of biscuit and breadcrumbs. You can add a little boiled peas or millet to it.

Important: Millet should be placed in boiling water. No need to cook. It should be infused in a closed saucepan for 6–8 hours. Cook the peas half-cooked for 20–30 minutes until fully cooked. Peas are added to the bait in portions, taking into account the activity of the fish.

Using groundbait in feeders is very beneficial. The main advantage is that the angler delivers bait and food to the same area every time. There is no such thing that the nozzle is outside the zone of the feeding cloud.

Depending on the strength of the current, it is necessary to prepare bait of a certain density. On lakes, reservoirs and river sections with little or no current, it is best to use lightweight and quickly disintegrating compounds. The so-called Geyser baits are well suited as a base. After entering the water, bubbling begins.

If there is a noticeable current in the fishing area, then it is optimal to use denser mixtures. You can add a little more millet or peas. In any case, you should always aim to flush out the food within five minutes.

Fishing technique and tactics

First you need to choose a place to bite, and also study the habits of the fish. Take a feeder and fill it with complementary foods.

The following ingredients can be used as complementary foods:

1. Oatmeal or coconut flakes;
2. Bran;
3. Dry bread scraps and crackers;
4. Floating boilies or pallets;
5. Birdseed.

After filling the feeder, you need to throw it into the fish habitat. Then you need to keep a very close eye on the feeder and float. If it becomes clear that the fish has swallowed the bait, it will move in a certain direction.

Good to know! It will be necessary to make a sweep in the opposite direction. There are 2 types of complementary feeding techniques. This is casting bait with a float to feed a point and hook fish. Another method is carried out by tracking the movement of the fish and throwing bait into a place located next to it.

How to quickly make a fishing rod for roach with a feeder and a float?

Although roach is a small fish, it turns out delicious when fried! You just need to catch more of it. And preferably larger specimens. But for this you need a feeder, which is not always convenient to throw from the shore, the place does not allow or the principle does not allow. This is where one method of catching roach using a fishing rod with a feeder and a float will help. The method is very simple and at the same time effective. As a bonus, the second part of the article contains a recipe for preparing bait.

Browse products for inventors. Link to the store.

How to make a float rod with a mini feeder?

We take a piece of wooden skewer to create the axis of the feeder. We cover it with varnish or glue to protect it from moisture. Paint it black for camouflage.

We take tape from a PET bottle. The width of the tape is 1 cm, the distance between the holes is also 1 cm. We pierce 7 holes in the tape with a hole punch. We insert our “skewer” into the hole, which is located in the middle of the tape. We rewind one end of the tape to secure it to a wooden pin and fill it with glue. The buoyancy of the wooden pin compensates for the weight of the plastic. We put two nipples on the ends of the mini-feeder. All. The float is ready, all that remains is to thread the fishing line through the nipples, placing the feeder between the float and the sinker.

DIY electronics in a Chinese store.

Look at the video to see how quickly you can make this tackle and how it works in natural fishing conditions.

The maximum benefits of a feeder on a float tackle are manifested when fishing for roach in the current near the bottom. The feeder is located a few centimeters above the sinker. When moving, the bait is showered with bait from the feeder. At the same time, at the fishing site, near the surface, small riding fish (roach, bleak) gather. In half an hour, the little thing gets used to the splashes of the feeder and rushes towards it, trying to grab the sinking bait in time. Therefore, the tackle must have a fairly heavy sinker.

The excitement among small fish attracts large fish (including predators), reduces its alertness, increases the number of successful hooks and the size of trophy specimens.

The feeder should be small, 1.5-2 thimbles, such a feeder does not reduce the sensitivity of the tackle, does not create significant resistance when hooking, and the float draft does not change when the feeders are empty and full.

When fishing for roach, the regularity of bait delivery, and not its quantity, is of particular importance. In addition, a small amount of bait causes fierce competition, which does not give the fish time to be careful with the bait and forces it to grab it without hesitation. In this case, as a rule, the bait goes to the largest or most aggressive fish.

Bait recipe for this rig.

The husk is passed through a coffee grinder, this will give more turbidity and odor in the water, then sifted in a wire colander to separate the useless husk. The prepared makukha is poured into cooked millet (two glasses of makuha per glass of millet). Millet is boiled in excess water with sugar until the grains begin to burst (4 tablespoons of sugar per glass of millet). The finished bait should consist of individual millet grains, which will be washed out of the feeder, and not resemble a porridge of crushed grains. The bait stuffed into the feeder should be washed out within 30 seconds, but not fall out while the feeder is lowered. This is achieved by the density of the packing and the amount of water in the bait.

Happy fishing! Learn how to make a raft from bottles here.

Pros and cons of a float rod with a feeder

Pros:

• Lightweight and easy to use equipment;
• It is universal (designed for any type of fish);
• Quick replacement and repair of gear;
• During fishing, the line gets tangled less;
• It can be made very quickly from available materials;
• Has a very low price.

Minuses:

• Most suitable for feeder rods;
• It is necessary to understand fertilizing;
• You need to secure the line and hook very tightly;
• Float rods are not designed for long casts.

Collecting donkey from a spinning rod

How to properly make a donk with a feeder? You just need to assemble the fishing rod correctly, and then the fisherman will receive the treasured catch.

Further donkey equipment depends on the type of rod:

1. Donka from a telescopic spinning rod. You should spread the rod. At this time, the centers of the rings are on the same line.
2. Donka from a plug rod. In this case, attention should be paid to the joints. They must be cleaned of dirt so as not to damage the form.

[THERE IS AN ANSWER] How to catch tench in the summer with a float rod?

Equipping this or that rod is quite simple.

How to assemble a donka? We assemble the donka as follows: put the reel, wind the fishing line, attach the weight, leash, hook and feeder.

When using gear, you need to consider the following points:

Reviews from fishermen

The feeder is made from scrap materials – it couldn’t be easier. Even just for fun, it’s worth testing your creation while fishing and seeing the result. Angler experience comes through experimentation. Grade:

Mikhail, 35 years old

I recommend trying this fishing tackle for fun. Shows itself well on the lake. The catch I brought home was wonderful. This is despite the fact that all day I caught only with a feeder. I recommend. Grade:

Alexander, 28 years old

An interesting thing to try in fishing. You can actually do this yourself, and it will take a little time. After reading about the behavior of the fish and its preferences, you can create a special food for which the fish will go. Grade:

Nikita, 27 years old

I bought this feeder for money, but then I decided to make it myself. It turned out no worse than the purchased model. They are purchased by those who are too lazy to bother with the material. But, making a feeder is very quick and easy. It really helps you get a good catch. Grade:

Ilya, 45 years old

Very good thing. I make it with my own hands from metal wire, I put bait inside. I won’t say that it greatly affects the catch, it can be obtained using other methods. The main thing here is the choice of a reservoir and a place for biting. Another important thing is the fishing rod. It should be comfortable and functional. Grade:

Stanislav, 38 years old

Good to know! According to numerous opinions of fishermen, such a feeder is very effective and easy to use. Reviews show that this is an effective way to catch both predators and ordinary fish. The main thing here is to know what kind of feeding is suitable for a certain type of fish, as well as its habits.

Donka with a feeder

Using a feeder allows you not only to attract fish from a considerable distance, but also to make the bait “targeted”. A donk equipped with this part allows you to deliver the mixture exactly to the location where the fish is supposed to be. And such bait begins its work immediately after the tackle splashes down at the casting point.

Open type

Feeders of this type are convenient because they allow you to load the bait mixture very quickly. It is enough to squeeze the feeder with bait in your hand, and it will be inside the spring. Such tackle can also be additionally loaded, but using it in strong currents, even with proper weighting, is not practical.

Open feeders are much more effective; they can be used:

• in bodies of water where there is no current;
• in lakes or reservoirs.

With such a feeder you can fish for a long time without changing the mixture.

Closed type

This model of feeder can be used in strong currents. To eliminate the possibility of the bait being washed out, it is equipped with a lid that is securely locked in the closed position.

As a rule, closed-type models are additionally loaded with lead. Such devices have a large capacity and do not require additional weight.

Fishing for crucian carp with a donk, although inferior in popularity to a float rod, invariably continues to be in demand among many fishermen. Bottom tackle allows you to reach crucian carp at depth, far from the shore, without the help of a boat. It goes there in the heat, away from warm, coastal water, and it is there that the largest specimens can be caught. Therefore, it is worth using this tackle for crucian carp fishing, especially in mid-summer.

Despite the fact that the habits and habitats of crucian carp are quite constant, they still have a certain seasonality.

in spring

In the spring, after ice drift, crucian carp go out to the sun-warmed coastal shallows. At this time it feeds on animal food, so they catch it with a worm, maggot or bloodworm. As the water warms up, the crucian carp moves increasingly deeper, and due to the growth of aquatic plants, it adds plant foods to the diet. All this time, it is more practical to catch it in shallow waters or in coastal reeds with a fishing rod and float. The time for feeder fishing comes towards the end of spring, after crucian carp spawning.

In summer

Summer is the main period for catching crucian carp on a donk. At this time, two periods can be distinguished: cool or moderately warm weather and heat.

In normal weather, crucian carp moves throughout the entire water area of ​​the reservoir, in the morning and evening, approaching the coastal reeds, and day and night, moving to the depths. At dawn it becomes active, but feeds almost all the time with short breaks. At this time, the donka works well during the day, and at night the largest specimens can be caught on it.

Interruptions in the bite also occur in the event of a massive bloom in the water. This is especially critical for small ponds, river creeks, and ditches. At such moments, crucian carp prefers to move to the springs, the confluence of streams and rivers, closer to the current.

In summer, the food preferences of crucian carp become very diverse, but often change. You need to constantly try different plant and animal baits.