10 Best Rowing Boats for Fishing

The best PVC boats in the middle segment

Apache 3300 SK

Motor boat Apache 3300 SK is produced. The first thing the manufacturer pays attention to is the diameter of the cylinder. To achieve maximum comfort and optimal performance, a cylinder with a diameter of 48 cm was designed, one of the largest among inflatable boats of this class! The size of the cylinder allows you to confidently operate the boat in bad weather. The manufacturer of the Apache 3300 SK boat guarantees excellent performance characteristics. The boat easily goes on planing and, due to the well-chosen shape of the inflatable keel, is characterized by a stable ride and comfortable passage through the wave. Due to the large cylinders, it is comfortable to sit in the boat and even at high speeds you feel safe, the boat does not try to be thrown out. The boat is made of PVC reinforced fabric with a density of 1000 g/m2. And even when supplied from the factory, it has protection for the cylinders and keel.

Advantages

• Increased balloon diameter
• High-density reinforced PVC fabric 1000 g/m2
• Protection by a fender with a wave breaker around the perimeter of the cylinders
• Protection with PVC profile along the keel
• Light boat weight
• Comfortable stay for a long time inside the boat

Flaws

• Among the boats there are defects from the manufacturer's factory. It is quite possible that the manufacturer has already eliminated all problematic issues in the design of the boat

Leader Leader-340NDND

Spacious motorboat for 4 people. Camouflage design makes it relevant for hunters. The cylinders are made of multilayer polyvinyl chloride with a density of 850 g/sq.m. The low-pressure inflatable bottom is not inferior in rigidity to plywood flooring. The sidewalls are additionally protected by a PVC profile. The keel provides maneuverability and directional stability at high speed. The built-in transom is designed for a 15 hp motor. At high speeds, water enters the cockpit; a drain plug is provided to remove it. The floor is hard, prefabricated, made from waterproof plywood. The panel lock is reinforced with an aluminum profile, which simplifies assembly and makes the structure reliable. A spacious luggage bag is installed in the bow. The guard rope is strong and well fixed on the sides. There are 3 bags for carrying.

Advantages

• Carrying handles
• Good hydrodynamics
• Long oars included
• Three isolated compartments
• High load capacity

Flaws

• Not detected

Teal 320K

Designed to carry three people. The stationary transom, 18 mm thick, is designed for installation of a 10 hp gasoline engine. Easily goes on a glider with low-power engines. The cylinders have three compartments to increase the level of safety on the water. Wear-resistant fabric with a density of 750 g/sq.m. is used in production. The inflatable keel provides directional stability at high speed when fully loaded. The folding floorboard is made of waterproof 9 mm plywood, which has an anti-slip coating. Assembly on an aluminum profile with a lock. The bottom is rigid and allows you to fish while standing. The seats are mobile, of the “lyktros-likpaz” type, and can be easily moved to a position convenient for all passengers. A guard rope is installed along the side. The set includes a foot pump, stringers, repair kit and oars.

Advantages

• Aluminum stringers
• Collapsible oars
• Narrow nose for easy handling
• Carrying bag

Flaws

• Heavy floor

FLINC FT320L

The motor boat FLINC FT320L made of reinforced PVC is a three-seater and suitable for a low-power motor. The product comes in a special bag that resembles an envelope. The package includes oars, oarlocks, a pump, carrying handles, a lifeline and a repair kit. The design itself is made with high quality, all seams are even, there is no glue. The bottom of the boat is non-inflatable and reinforced with a special rubber strip. There are 3 air compartments, the weight of the boat is 30 kg. The product is available in 2 colors: gray and green. The usual keel is missing, instead there are “floats” that are installed in the transom plate area. This replacement makes it possible to reduce the turning radius of the craft.

Advantages

• quite durable
• excellent handling
• decent equipment
• relatively light

Flaws

• unreliable pump
• engine limitation

Aqua 2900 C

The two-seater motor boat "Aqua" 2900 C is well suited for fishing and other water purposes. With a length of 290 cm, it has a load capacity of up to 350 kg. The transom is built-in, and the recommended motor should be up to 5 hp. There are 3 air compartments in the vessel, the bottom is non-inflatable, with a collapsible plywood floor. The package includes a hard seat and onboard equipment (carrying handles, lifeline, rowlocks and oars). The weight of the set is 35 kg, the diameter of the cylinders is 40 cm. “Aqua” 2900 C is an excellent version of a watercraft for a motor with a hard bottom.

Advantages

• the assembly is high quality
• fits the engine
• three air compartments for safety

Flaws

• heavy weight
• Seats may move when sailing

Hard Bottom Boats

Let's consider the rating of PVC boats with a hard bottom.

Poseidon PN 500

This is a rather expensive option from the premium segment. However, the characteristics of this boat are impressive:

• capacity - 11 people;
• the weight of the total cargo on board is over 1900 kg;
• the bottom and cylinders are made of reinforced PVC;
• long service life;
• decent level of security.

The vessel can be equipped with a 50 hp engine, which allows it to reach gliding speeds along the water surface of up to 80 km/h.

The cylinders have impressive dimensions - 62 cm. Therefore, preparation will take a lot of time.

Of course, in terms of dimensions, the product outperforms most candidates. However, not everyone can afford the product.

Kasatka KS 385 Marine

This is a great option for fishing for three people. However, the manufacturer announced the possibility of transporting six people, but then the trip will take place in less comfortable conditions. The maximum weight of transported cargo is 740 kg.

Installation of an engine up to 30 hp is allowed. The special bottom design ensures a comfortable ride through the waves.

Riviera Maxima 3400 SK

This is an excellent choice for fishing in the summer. The fairly high cost of the boat is explained by its high quality; the model will serve the owner for decades.

In addition to its presentable appearance, the sample boasts a reliable finish. For production, strong PVC material reinforced with polymer threads was used. Carriage of cargo up to 650 kg is allowed.

Aluminum products

Linder Fishing 410

It belongs to the rowing category, but can be equipped with a motor. Three-seater design with a length of 403 cm and a width of 156 cm. Maximum power - 2.5 l / s, load capacity - 300 kg. The weight is significant - 75 kg. Transportation by public transport is excluded. Can be installed on the roof of a car and transported to a designated location. In the manufacture of the case, a high-strength aluminum alloy is used, which is not afraid of corrosion. Even if the ship is completely filled with water, it will not sink. For safety, the case is equipped with microdots.

For such a product you will have to pay 221,400 rubles.

boat Linder Fishing 410

Advantages:

• safety;
• unsinkability;
• ease of use;
• durability;
• reliability;
• structural strength;
• with motor installation function.

Flaws:

• Not everyone is able to purchase products.

Linder Fishing 440

Tops the ranking of luxury watercraft. It is very popular among people with good incomes who love active recreation. It has good stability and rows easily and naturally. You can install an outboard electric or gasoline motor. Equipped with two lockers: rear and middle. Made from high-strength aluminum alloy used in aircraft construction. Seats four people. Can be used for water trips, fishing, traveling, carrying luggage, excursions.

Product price – 290,000 rubles.

boat Linder Fishing 440

Advantages:

• classic family model;
• excellent stability;
• can be easily rowed;
• maneuverable;
• high quality of the material used;
• not subject to corrosion;
• certified product;
• warranty – 3 years;
• long service life;
• safe;
• universal;
• comfortable;
• functional;
• practical;
• feels confident in shallow water;
• does not require special storage and maintenance.

Flaws:

• prohibitively high cost.

Tactics – 270

Tips from the professionals: if you need an inexpensive but practical boat designed for hunting, fishing or walking along rivers and lakes, then this is the most suitable option. It can withstand temperatures from -5 to +40 degrees, can withstand waves up to 0.3 m, and can be moved using oars or a low-power motor. The basic configuration includes cuffs, transverse benches and a bow eye. Additionally, awnings, interior, hull and all kinds of accessories can be included.

The average price is 36,100 rubles.

boat Tactics – 270

Advantages:

• quality;
• practicality;
• reliability;
• long service life;
• sustainability;
• maneuverability;
• permeability;
• combination of price and quality.

Flaws:

• not installed.

Tactics – 430 DC – Lite

The four-seater aluminum boat is made of AMG-5M material. Quite massive, weighs 180 kg. It is convenient to carry out water trips with the whole family or a group of friends. It prefers to plow rivers and lakes where the wave height does not exceed 0.6 meters. Moves with the help of oars. An outboard motor can be installed. It functions normally at temperatures from -5 to +40 degrees. Present:

• two consoles;
• nasal lip;
• slats made of moisture-resistant plywood;
• buoyancy blocks;
• nasal dry locker.

Additional equipment may include:

• windshield;
• salon;
• frame;
• electrical equipment;
• trailers;
• accessories;
• fuel system;
• awnings;
• steering.

Maximum load capacity – 450 kg, dimensions – 4.58*1.65 m, side thickness – 2 mm, bottom thickness – 3 mm, transom height – 380/510 mm.

The sellers are asking 146,300 rubles for the product.

boat Tactics – 430 DC – Lite

Advantages:

• maneuverability;
• functionality;
• comfort during use;
• versatility;
• capacity;
• reliability;
• durability;
• high quality of materials used;
• safety;
• easy move.

Flaws:

• none.

What types of boats are there?

The best manufacturers produce three types of boats:

• aluminum;
• inflatable PVC;
• plastic.

Based on the type of movement, they are divided into:

1. Rowing. The “engine” is the oars.
2. Mechanical. Equipped with gasoline or electric motors.
3. Sailing. To move you need wind and sails.

Aluminum ones are considered the most convenient and durable of all popular models. In their manufacture, special alloys are used that are not subject to corrosion. Painting is carried out only to create an attractive appearance. They are equipped with a motor whose power is not inferior to those used in plastic or inflatable analogues. The main advantage is the mobile ability, the disadvantage is the noise of the motor. Positive points are also:

• capacity (3 or 4 people can sail at the same time);
• buoyancy (due to the presence of tanks filled with air);
• comfort (all conveniences for use are available);
• wear resistance (rust is not expected, so painting is not often necessary);
• durability (lasts much longer than their analogues);
• lightness (minor weight allows one person to easily pull the product out of the water onto the shore).

Boats with an inflatable bottom are used for shallow water swims. They are stable on the surface of the water and are quite difficult to turn over. Weight is negligible. They are easily and simply carried by hand if insurmountable obstacles arise. They are compact, fit in a bag, and are easy to transport. According to fishermen, an indispensable assistant.

Plastic products have the following positive qualities:

• ease;
• acceptable average price.

As disadvantages, it is worth noting the fragility of the material and fragility.

Popular models are available in three types:

• open (available with oars or with a motor, used in low currents);
• closed front part (for those who like to fish at sea or in large bodies of water);
• with cabins (used at sea).

Today you can also find wooden structures. Despite their “antiquity,” they have not undergone significant changes. They have long been discontinued, but artisans make products for their own needs. It is impractical, bulky, heavy. In the warm season it is moored to the shore, and in the winter it is pulled out of the water.

Regardless of the type, the boat needs an anchor to maintain the balance of the craft and reduce speed.

The boat hull can also be made of fiberglass and plywood.