Fishing knots for hooks and leashes

How to properly tie a hook to a fishing line, eye hooks

Experienced fishermen have many variations in their knowledge of tying fishing line to hooks, but they always use 1-2 types. The list of hook parts includes:

1. The head is the part for which, in fact, fixation occurs;
2. Forend - a component part that extends from the head to the hook;
3. Prying - a semicircular area;
4. The sting is the sharp end of the hook, which catches the fish.

Let's celebrate! The main material used in the manufacture of hooks is metal mixed with steel. There are several methods of binding, which will be discussed in more detail below.

Grinner

The strength level is more than 80%; a fishing line is used that consists of only one thread.

It should be tied like this:

1. The line is pulled through the eyelet twice, leaving 10 centimeters at the end;
2. Wrap the fishing line 6 times around the base, pull the fishing line through the loop;
3. Tighten firmly.

Uni

To implement this node, you must follow the above recommendation, which is a step-by-step guide.

Strength is almost 90%. Mainly suitable for fishing line that has a small diameter.

Shark knot

Relevant only for professional fishermen who already know how to tie a hook using basic methods. The strength remains unchanged even over time; they fit the fishing line in one thread.

It should be tied like this:

1. Thread the fishing line into the eye of the hook and make a loop;
2. Wrap the warp several times and thread the end through the loop formed.

Spindle

A strong knot that is suitable for different types of fishing line. Strength approaches 90%. The cord is inserted into the eye and goes around the fishing line 5 times. At the final stage, pass it through the loop and tie the cord. Suitable for single or flucarbon lines of small diameters.

Blind node

There is a loop at the end of the leash, so the most reliable way to secure the hook is a blind knot. The method is suitable not only for thin lines, but also for strong ones. You can make such a knot only when the loop has a soft base. A blind knot can be used to tie sinkers.

Tying pattern:

• We pull the fishing line through the ring and wrap it around 6-7 times;
• After the above, we send the fishing line into the loop and check for strength; if the knot is tight, then we did everything correctly.

Locked up bloody

To tie a knot, you need to choose fishing lines of different diameters. The positive side of such a knot is strength and compactness, but the disadvantage is the complex implementation. Naturally, the deficiency can be combated through long training.

Gripping unit

The appearance resembles the movement of a snake; to tie it you need to take two cables. The knot has no complications, as it is familiar to almost all fishermen. It can be used on any fishing line.

California Knot

It was invented by California fishermen almost 40 years ago. The connection is simple and maximally reliable 97%.

How to tie:

1. Fold the two ends of the fishing line in half and insert it into the eye;
2. Wrap the fishing line and stick it into the eye;
3. Bring the hook back and tighten the knot.

Canadian eight

1. Fold the fishing line in half and form a loop from it;
2. Wrap the resulting line around another line and make a loop again;
3. Check for strength.

Bloody Knot Clinch

This strange name contains a tying pattern that is often used by experienced fishermen. The name comes from the Middle Ages; belts were tied with such knots, which were used in case of disobedience of fishermen.

Not only hooks and bait are attached, the strength is 70%, which is very low in relation to the above.

Scheme:

1. One end of the fishing line is inserted into the eye;
2. We twist it around its axis 4-8 times;
3. The end is again threaded into the loop formed at the beginning and tightened.

Clinch improved

More durable than the above. It is strictly forbidden to use it to secure weights and wheels. And so the knot is universal and can be used both on a spinning rod and on a regular fishing rod.

Bloody

The bloody knot is universal and durable.

Subsequence:

1. Intertwine two laces together;
2. Twist one line onto another, and then vice versa, the number of turns should be the same;
3. Wet the knot and tighten

Salmon knot

Has a tear resistance of 97%. Suitable for any fishing line.

Fisherman's Eight

Fastening is allowed not only for hooks with an eye, but also without an eye. Popular with beginners.

Tuna knot

A rare knot because it is very difficult to tie, but the options for breaking are kept to a minimum. To implement such a tie you need a small wire size. There is no need to bandage it as it is more likely to wear out faster than it needs bandaging.

Bayonet knot

More relevant for interlaced fishing line; using a different fishing line can lead to slipping.

Turtle knot

1. The fishing line is threaded through the hook and wrapped around its axis;
2. Re-thread through the eye and tighten the knot.

Fishing knots by type of use

Fishing weaves are used depending on the type intended for a particular type of fish. Ease of use and durability are the main indicators for effective fishing. Today, the most relevant and popular fishing hook ties are highlighted.

Knots for hooks and lures

Options for hooks and lures include:

1. Bayonet loop .
   The bayonet version is considered the least complex and therefore very common, which is performed by tying a fishhook using half bayonets on one forend. Only used for fishing line made from natural fiber. Bayonet knot
2. Blind node. Provided that there is a non-tightening loop at the end, the ideal option would be a blind knot that will securely attach the fishing tackle.
   It is necessary to thread the end into the eye of the hook and throw the thread over, thereby forming a blind hole. This option is suitable for cotton material and cables made of polyamide resins. Also, a blind loop will be indispensable when made from soft wire. Blind node
3. Canadian eight. A loop that holds securely and firmly even on synthetic materials and does not slip.
   Another advantage is that it can be easily untied if necessary. Canadian eight
4. Fishing loop. This is the most reliable option for weaving knots, which allows you to firmly attach the fishing line to the eye of the hook.

   Fisherman's Loop

Loop knots

1. Step weaving. This is an option preferred by experienced anglers who use rigs without an eye, which are characterized by a high level of strength when catching predatory fish. Step braiding is a self-tightening noose that is securely attached to a hook without an eye.

   Step weaving

   Read also:  Fishing knots - description of the most reliable knots and methods of tying them
2. The knot is gripping. This is a 12 snake loop that is only used for synthetic fiber.

Knots for attaching fishing line to reel

An important process in fishing is the ability to securely tie to a leash.

In order to securely fasten the coil, the following weaves are used:

1. Simple braiding with a leash is mainly used to quickly change cross leashes. You will need to pass the ends of the cable around the loop and bring them into the middle. It is imperative to equalize the length of all leashes, but attach only one to the fishing line - the main one, tie the rest at the opposite end, so that a figure eight is formed.
2. The main running version of weaving is used for tying transverse leashes. To do this, you will need to tie the fishing line with a simple running knot, but do not tighten it completely. At the end of the cable, make a figure eight and bring it inside the loop, tighten the remaining length.

Hook without eye

Even experienced fishermen in some cases do not have the knowledge of how to tie a fishing line to a hook if it does not have an eye:

1. Place the fishing line next to the hook and wrap one side around 5 times;
2. Next, we thread the same end into a loop and dip it in water, only then tighten it.

Spiral knot (Dumhof)

Designed for double braided lines.

Step knot

Designed for fixing fishing line to those hooks that have a spatula instead of an eye^

1. Fold the fishing line in half and secure with a hook;
2. Wrap the hook 3 times and tighten the line.

Universal nodes

In order to tie it, you need to be careful and follow the recommendations:

1. Place the fishing line next to the graft and make a small loop;
2. Wrap the end around the hook 6 times, wet the knot and secure it.

CanoeMan

Used on one line only and the strength is over 95%. The main thing in tying is to pull the knot correctly.

Duncan loop

1. We put the tail in the ear and wrap it 4 times together with the folded ends;
2. Tighten the knot.

Eugene

Equally durable on all types of materials.

Orvisknot

One of the most popular methods, which provide not only a high level of strength, but also the versatility of tying the material.

There is no professional who does not know this node:

1. Pull the fishing line through the eye and insert the end through the formed loop;
2. Next, we pass the formed tail through the loop three times;
3. We tighten the knot, first wetting it.

Palomar

Advantages of using such a node:

1. Easy to tie;
2. Versatility;
3. Strength.

The only disadvantages are the inability to use hooks with a spatula-shaped hole.

In addition, there are varieties of palomar:

• Triple
• Double
• Single

Rapalaknot

Rapala is one of the ways to fix baits. Can be used for spinners. When purchasing a spinner from the manufacturer of the same name, instructions for tying are included, which is a big plus. Strength is more than 90%.

Snell

A universal method with high strength.

cat's paw

From the name alone it is clear that the fixation method externally resembles a cat’s paw. The possibility of untying is only 15%.

Rib

1. Fold the thread in half and thread it through the shank;
2. Wrap 5 times and thread the tail through the loop;
3. Wet the knot and tighten.

Learning to knit a figure eight knot

There are many varieties of the “figure eight”, but it is enough to learn how to tie a classic knot to understand the principle of tying and easily master other options.

The classic “eight” is used on all types and types of fishing lines, except slippery ones. Most often used to limit a sliding float. If movement is necessary, the knot can be easily untied.

To run the node you need:

1. make an open loop 3 cm long from the fishing line;
2. overlap the root end with the free end from above;
3. place the free end under the radical;
4. insert the free end into the formed loop from above;
5. tighten the knot.

The figure eight knot has several varieties, which are used in one case or another, depending on the diameter of the fishing line, the shape and size of the hook.

“Eight over the ring” is performed over the ring of the hook on the main fishing line:

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective:

1. Bite activator. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates its appetite. It’s a pity that Rosprirodnadzor wants to impose a ban on its sale.
2. More sensitive gear. Reviews and instructions for other types of gear can be found on the pages of my website.
3. Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading our other articles on the site.

• pass the free end of the fishing line through the ring of the hook;
• make a closed loop: place the free end under the root and place it in the loop between the crossing ends of the fishing line and the ring of the hook;
• tighten the knot;
• cut the free end to 2-2.5 mm.

The “fisherman’s eight” is performed by girth of the ring and shank of the hook:

1. insert the free end into the ring of the hook;
2. perform fore-end wear;
3. insert the free end into the ring of the hook;
4. overwhelm the indigenous one;
5. start under the root;
6. insert the free end into the loop formed around the forend, bypassing the ring;
7. pull the knot by the free end;
8. tighten the knot by the root end;
9. shorten the free end to 2-2.5 mm.

The “Canadian” figure eight is performed on the shank of the hook:

• insert the free end into the ring of the hook;
• perform fore-end wear;
• place the free end between the main and fore-end;
• insert the free end into the loop;
• pull the knot by the free end;
• tighten the knot behind the main one;
• cut the free end to 2-2.5 mm.

Tying a hook with a spatula

The following type of knot is used when crocheting a leash:

1. tie a simple knot;
2. place the free end into a loop twice;
3. insert the shank of the hook into the formed figure of eight along the line;
4. tighten the knot at both ends;
5. cut the free end to 2-2.5 mm.

Tying lines

“Eight” is used when splicing broken fishing lines and for attaching leashes. For the knot, you can use fishing lines of both equal and different diameters.

Tying the lines together is done in two ways.

Direct way:

• make a figure eight on one line;
• the free end of the second fishing line is wound at the exit point of the free end of the first;
• the free end of the second is carried out in a parallel counter-movement in the completed unit;
• bring the free end of the second line to the entry point into the main knot of the first;
• tighten the knot with the free ends;
• tighten the knot with the root ends;
• trim the free ends to 2-2.5 mm.

Reverse method:

1. make an open loop on the first line;
2. use the second fishing line to make a closed loop with the first one running around, so that both free ends are on the same side of the connected loops;
3. enclose the free end of the second fishing line with the native one;
4. pass the free end of the second in a counter motion along the main one;
5. enclose the free end of the first with a native native;
6. pass the free end of the first in a counter-movement along the root end of the second;
7. pull the knot by the free ends;
8. tighten the knot by the root ends;
9. trim the free ends to 2-2.5 mm.

Tying loops

• fold the free end in half, forming a loop;
• enclose the double root with overlap;
• bring the free end into the starting loop;
• tighten the knot;
• trim the free end to 2-2.5 mm.

Multiple hook fastening

In order to attach several hooks, you can use the options provided for eye hooks. However, there is also a special node, which will be described in more detail below.

Knot-less

It is used only in conjunction with fishing line in several layers, the strength is about 95%.

1. The fishing line is threaded through the eye;
2. Wrap around the axis 7 times and thread it through the eyelet again;
3. Wet with water and tighten.

Appetite comes with eating, and so does the fisherman. With experience, the fisherman will have many knots that he will possess, but the leaders will be 2-3.

All nodes are subject to the following rules:

• The knot should be well remembered;
• Must be strong and not unravel;
• The tied knot needs to be wetted, then it will be much stronger;
• The knot itself does not need to be tightened too much; the external impression should remain free.

Let's celebrate! Experts recommend that all knots be wetted before tightening and that no long ends are left. By following these tips, fishermen can extend the life of their knot.

Clinch Knot

Clinch

This scheme is a modern, improved version and is often used for monofilament type cables. For the “clinch”, experts advise using only fishing line with a diameter of no more than 0.4 mm, in this way it will maintain a load capacity of up to 97%.

However, this option is completely useless for materials made of fluorocarbon or wicker type.

First you need to thread the fishing line into the eye of the hook, leaving a 10 mm free end, and wrap the working side around the main cable about 6-7 times.

After this, wrap the working thread back and make a loop by threading one end of the working line into it. Tighten the cable a little, but do not tighten it too much, and be sure to hold the base with your fingers.

Soak the knot in liquid and only then tighten the main cable, thereby gradually moving towards the previously made loop at the eye of the hook. Remove the excess part, leaving no more than 2 mm at the end.