What is the correct knot to tie a carabiner to a fishing line?

Which node should you prefer?

Fishing line is divided into two types: braided (also known as cord or braid) and monofilament. The latter is considered less durable compared to the cord. The indicator is also reduced by unnecessary elements (knots, intersections, bends), so the process of attaching the carabiner clasp must be approached responsibly.

The table shows the characteristics of popular knots in terms of strength and application with the type of fishing line.

About Lindemann technology

The above methods of tying knots are suitable for working with braided fishing line. Monofilament is also suitable for Lindemann. To make a knot, you need to do the following:

• Pass the line through the ring of the carabiner.
• Make a loop and return the line back. The carabiner is knitted using a loop in which one of the sides is double. The free end of the fishing line is wound around it. The number of turns depends on its thickness. The thinner it is, the more turns it will need.
• Tighten the knot. The remaining free end can be trimmed.

How to tie a carabiner to a fishing line

In this article, I would like to answer a common question from anglers: “How to tie a carabiner to a fishing line?”
For some, this is not at all difficult, but if you found my website and this particular article, it means you still do not know how to tie a carabiner to the main fishing line and my work is not in vain. So it’s not in vain that I’m now trying to convey to you all the subtleties of this fishing technique as clearly and usefully as possible. The carabiner is a very important part of fishing equipment and helps prevent the line from twisting. Below we will look at the best ways to tie a carabiner to a fishing line, cord or braid and how to tie a carabiner to a fishing line for a spinning rod, although, in essence, there is no difference - whether you tie a carabiner to a fishing line for a spinning rod, or to a fishing line for a donkey or a float fishing rod

Well, since you don’t yet know how to tie a carabiner to a fishing line, it will probably be useful for you to learn about other fishing knots and tying fishing elements. Take a look, perhaps some article will be of interest to you:

Well, now let’s move on directly to tying the carabiner to the fishing line and consider all the options.

"Double Clinch"

This node is not the main one. However, some fishing enthusiasts are interested in how to tie a carabiner to a fishing line using this knot. The technology for its production itself is simple. First, you need to pull one end of the fishing line twice through the fastening ring, thus forming a loop.

Then wrap it around the fishing line several times. One end must be passed through the knot. The result will be two nodes. In the same way, the end of the fishing line is passed through the second one. After performing these actions, the free end and the tackle are pulled in different directions. This way both knots are tightened. The remainder of the fishing line is carefully cut off.

How to tie a carabiner to a fishing line: method No. 2

The next method is even easier than the previous one, but this does not make it any less reliable. I myself often use just such a knot for tying a carabiner or swivel to a fishing line, and this knot has never let me down. In addition, it knits very quickly.

The technique is simple. It is necessary to thread the tip of the fishing line into the eye of the carabiner about 6 cm, more is possible, the main thing is that this section is not too short, because then it will be inconvenient to control it in order to complete the knot. It will be convenient to manage the long section, and the excess will then simply be cut off.

Tips and secrets

The use of certain nodes should take into account the type of fishing line used and the expected load. Each variety will be most effective only if chosen correctly.

Using knots may seem difficult at first, but they are actually easy to remember. If you spend time on training and bring your skills to automaticity, then tying the desired knot will not create any problems even in cases where it happens in a hurry.

When creating knots, you need to remember that their use always reduces the strength of the gear. For each node there is a certain level of strength that it can provide. You need to choose those options for which this parameter is maximum.

The decrease in strength is due to several reasons:

1. When the knot is tightened, frictional forces act, which partially destroy the fishing line in this place.
2. Each type of thread used has resistance to abrasive effects. The higher it is, the more the knots reduce strength.
3. When creating complex knots, the line may have a large number of kinks. Under significant load, they reduce the strength characteristics of the gear.
4. High friction can cause the material to overheat and melt.

How to properly tie a carabiner to a fishing line - video instructions for creating a knot connection:

If wetting is performed, friction decreases dramatically. In this case, the effect of negative effects on the strength of the fishing line becomes insignificant.

When a knot is tied, the ends stick out. They interfere with fishing, so they need to be cut off. If they are left too short, this can lead to the knot coming undone under heavy load. It is considered sufficient that the length is 3-4 mm. You can also burn the tip of the fishing line. After this, it will become thickened and will not be able to come undone.

The use of a carabiner makes the connections more durable and makes it easy to change gear. However, these advantages only appear in cases where the correct knot was used to attach this accessory.

How to tie a carabiner to a fishing line: a few more ways

To consolidate your knowledge, I recommend that you watch another video that shows 6 more reliable ways to tie a carabiner to the main fishing line. Do not forget that before tightening the knot, it must be wetted so that the fishing line retains its strength properties and do not tighten the knot too quickly to prevent the fishing line from heating up.

I hope my article helped you and you can now tie the carabiner to the fishing line yourself without any problems. I wish you that your gear never lets you down. Return to our website and find out even more useful information. We will be happy to answer your comments and will be grateful if you share the site on social networks.

How to tie a carabiner to a fishing line

In the provided article, I would like to consider the question of how to tie a carabiner to a fishing line, which anglers have been asking themselves for many years. Some fishermen will find this something trivial, but some will find useful information for themselves.

A carabiner is one of the most important elements of equipment, which allows you to quickly change gear and avoid twisting the fishing line. Below are the main ways to properly tie a carabiner to a fishing line, cord or braid. After all, 80% of the success of fishing depends on this, and on whether you can prepare a bite activator with your own hands. I think it’s time to look at the main knots that allow you to tie a carabiner to a regular fishing line.

To monofilament line

Very often, anglers are interested in the question of how to tie a carabiner to the main fishing line of a spinning rod, fishing rod or feeder equipment, because this small accessory allows you to completely avoid twisting of the fishing line and significantly increases its strength. And replacing equipment equipped with a carabiner is much faster and more convenient.

Tying a carabiner is done in a variety of ways, some are very simple and others are complex, some are strong and others can be easily undone. To avoid troubles while fishing, you need to know the main points and answers to the question of how to tie a carabiner to a fishing line. Among the many knot options, there are 4 main ones that allow you to tie a carabiner to a monofilament fishing line.

250 kg of fish for 1 fishing trip

The detained poachers told the secret of their success for a good bite. The fisheries inspectors were so surprised by their lack of poaching equipment.

You can reliably and correctly tie a carabiner to the main fishing line using four connections that are known to all anglers, these are:

These are the four simplest and most reliable ways that allow beginners and experienced fishermen to understand how to tie a carabiner to a fishing line correctly and so that it does not come undone at the most inopportune moment. Let's take a closer look at the knitting pattern for each of them.

Hangman's Knot

The hangman's knot is one of the simplest attachment methods

, let's take a closer look at the step-by-step instructions for tying it:

1. The first thing to do is thread the fishing line through the eye of the carabiner;
2. Next, you need to bend the working end of the fishing line and tie it around the fishing line that secures the carabiner, pass the end of the fishing line through the loops formed as a result of the previous bend, as shown in the video;
3. After you have used all the free line, you need to pull the knot to the carabiner, wet it and tighten it;
4. Excess fishing line must be removed with scissors.

Offshore swivel-knot

Offshore swivel-knot is a very interesting knot that came to us from abroad, where fishermen tie various accessories to the fishing line in exactly this way. Let's take a closer look at how this knot is tied:

1. Through the eye of the carbine, you need to pass a loop tied at the working end of the fishing line (the diameter of the loop should be approximately 10 centimeters). In this case, it is necessary to hold the loop with your fingers so that the carabiner hangs down and the loop sticks up;
2. Now you need to wrap the carabiner around its axis several times to form a semicircle of fishing line;
3. Then all that remains is to generously moisten and tighten the knot.

I think no photo, pictures or diagram will illustrate the binding sequence better than the video provided below.

Double clinch

The double clinch knot is very popular among fishermen. Very often, when I ask novice fishermen how to tie a carabiner to a fishing line, they answer - with a double clinch. Although the knot is not one of the main ones, it is considered very reliable and is used quite often.

Offshore swivel-knot

Those who don’t know how to tie a fishing carabiner can use another method of making a knot. This technology is called Offshore swivel-knot. The work of installing the fastening device on the fishing line is carried out in several stages. At the very beginning you need to make a loop. Since in the future it will need to be inserted into the eye of the carabiner, its length must be at least 100 mm. While making the knot, the carabiner should be held so that it hangs down, with the loop and its ends pointing upward.

Then the carbine needs to be rotated several times around its axis. As a result of this wrapping, a knot is formed. Before tightening it, experienced fishermen recommend thoroughly moistening it.

To the braid

Quite often, fishermen need to mount various fishing accessories on a braided cord. Most often this is required when installing a carbine to a spinning rod or making various equipment for a feeder and float rod.

The question of how to properly tie a carabiner to the main braided fishing line is mainly of interest to spinners, since they use a braided cord as the main fishing line; this is extremely rare among float fishing enthusiasts.

Basically, two nodes are used for such connections: a universal one and a free hinge node. Let's take a closer look at each of them and understand the installation and tying schemes for these connections.

Universal knot

One of the most reliable knots is considered to be the “universal fishing knot.” I don’t know why they call it that, but I didn’t notice any versatility in it; you can’t tie anything to a fluorocarbon fishing line with such a knot, you have to look for alternative options.

It is tied as follows:

1. It is necessary to thread the fishing line through the carabiner and tie a loop at its end;
2. Through this loop it is necessary to stretch the free end of the fishing line, and move the other towards it;
3. Wrap the resulting loop 4-6 times with the free end of the fishing line;
4. Then you need to make another turn around the main line and pull the working end into the main loop, as shown in the video;
5. Now all that remains is to wet and tighten the knot;
6. Remove excess line.

Free hinge assembly

Very popular among fishermen is the free hinge knot, which allows you to tie a carabiner to a braided line. I don’t use it, but many friends prefer this connection. It is knitted as follows:

1. The fishing line must be bent in half and twisted;
2. The twisted line must be threaded through the eye of the carbine;
3. Now you need to fix the end of the fishing line and twist the carabiner towards it;
4. The line must be twisted;
5. In this way, it is necessary to make up to 7 revolutions;
6. Now all that remains is to moisten and tighten the knot

There is no excess fishing line left when installing such a knot; you can tie it very quickly and it is quite strong and reliable.

I think now all fishermen understand how to tie a carabiner to fishing line and braid. Don’t forget to leave comments, share the article with friends and acquaintances on social networks, and visit our website daily.

250 kg of fish for 1 fishing trip

The detained poachers told the secret of their success for a good bite. The fisheries inspectors were so surprised by their lack of poaching equipment.